diff options
Diffstat (limited to 'src/cpu/intel/car/cache_as_ram.inc')
| -rw-r--r-- | src/cpu/intel/car/cache_as_ram.inc | 419 |
1 files changed, 419 insertions, 0 deletions
diff --git a/src/cpu/intel/car/cache_as_ram.inc b/src/cpu/intel/car/cache_as_ram.inc new file mode 100644 index 0000000000..2f2a9ca81f --- /dev/null +++ b/src/cpu/intel/car/cache_as_ram.inc @@ -0,0 +1,419 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com> + * Copyright (C) 2005 Eswar Nallusamy, LANL + * Copyright (C) 2005 Tyan + * (Written by Yinghai Lu <yhlu@tyan.com> for Tyan) + * Copyright (C) 2007 coresystems GmbH + * (Written by Stefan Reinauer <stepan@coresystems.de> for coresystems GmbH) + * Copyright (C) 2007 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* We will use 4K bytes only */ +/* disable HyperThreading is done by eswar*/ +/* other's is the same as AMD except remove amd specific msr */ + +#define CacheSize CONFIG_DCACHE_RAM_SIZE +#define CacheBase (0xd0000 - CacheSize) + +#include <cpu/x86/mtrr.h> + + /* Save the BIST result */ + movl %eax, %ebp + +CacheAsRam: + // Check whether the processor has HT capability + movl $01, %eax + cpuid + btl $28, %edx + jnc NotHtProcessor + bswapl %ebx + cmpb $01, %bh + jbe NotHtProcessor + + // It is a HT processor; Send SIPI to the other logical processor + // within this processor so that the CAR related common system registers + // are programmed accordingly + + // Use some register that is common to both logical processors + // as semaphore. Refer Appendix B, Vol.3 + xorl %eax, %eax + xorl %edx, %edx + movl $0x250, %ecx + wrmsr + + // Figure out the logical AP's APIC ID; the following logic will work + // only for processors with 2 threads + // Refer to Vol 3. Table 7-1 for details about this logic + movl $0xFEE00020, %esi + movl (%esi), %ebx + andl $0xFF000000, %ebx + bswapl %ebx + btl $0, %ebx + jnc LogicalAP0 + andb $0xFE, %bl + jmp Send_SIPI +LogicalAP0: + orb $0x01, %bl +Send_SIPI: + bswapl %ebx // ebx - logical AP's APIC ID + + // Fill up the IPI command registers in the Local APIC mapped to default address + // and issue SIPI to the other logical processor within this processor die. +Retry_SIPI: + movl %ebx, %eax + movl $0xFEE00310, %esi + movl %eax, (%esi) + + // SIPI vector - F900:0000 + movl $0x000006F9, %eax + movl $0xFEE00300, %esi + movl %eax, (%esi) + + movl $0x30, %ecx +SIPI_Delay: + pause + decl %ecx + jnz SIPI_Delay + + movl (%esi), %eax + andl $0x00001000, %eax + jnz Retry_SIPI + + // Wait for the Logical AP to complete initialization +LogicalAP_SIPINotdone: + movl $0x250, %ecx + rdmsr + orl %eax, %eax + jz LogicalAP_SIPINotdone + +NotHtProcessor: + +#if 1 + /* Set the default memory type and enable fixed and variable MTRRs */ + movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx + /* Enable Variable and Fixed MTRRs */ + movl $0x00000c00, %eax + wrmsr +#endif + + /* Clear all MTRRs */ + xorl %edx, %edx + movl $fixed_mtrr_msr, %esi + +clear_fixed_var_mtrr: + lodsl (%esi), %eax + testl %eax, %eax + jz clear_fixed_var_mtrr_out + + movl %eax, %ecx + xorl %eax, %eax + wrmsr + + jmp clear_fixed_var_mtrr + +fixed_mtrr_msr: + .long 0x250, 0x258, 0x259 + .long 0x268, 0x269, 0x26A + .long 0x26B, 0x26C, 0x26D + .long 0x26E, 0x26F +var_mtrr_msr: + .long 0x200, 0x201, 0x202, 0x203 + .long 0x204, 0x205, 0x206, 0x207 + .long 0x208, 0x209, 0x20A, 0x20B + .long 0x20C, 0x20D, 0x20E, 0x20F + .long 0x000 /* NULL, end of table */ + +clear_fixed_var_mtrr_out: + +/* 0x06 is the WB IO type for a given 4k segment. + * segs is the number of 4k segments in the area of the particular + * register we want to use for CAR. + * reg is the register where the IO type should be stored. + */ +.macro extractmask segs, reg +.if \segs <= 0 + /* The xorl here is superfluous because at the point of first execution + * of this macro, %eax and %edx are cleared. Later invocations of this + * macro will have a monotonically increasing segs parameter. + */ + xorl \reg, \reg +.elseif \segs == 1 + movl $0x06000000, \reg /* WB IO type */ +.elseif \segs == 2 + movl $0x06060000, \reg /* WB IO type */ +.elseif \segs == 3 + movl $0x06060600, \reg /* WB IO type */ +.elseif \segs >= 4 + movl $0x06060606, \reg /* WB IO type */ +.endif +.endm + +/* size is the cache size in bytes we want to use for CAR. + * windowoffset is the 32k-aligned window into CAR size + */ +.macro simplemask carsize, windowoffset + .set gas_bug_workaround,(((\carsize - \windowoffset) / 0x1000) - 4) + extractmask gas_bug_workaround, %eax + .set gas_bug_workaround,(((\carsize - \windowoffset) / 0x1000)) + extractmask gas_bug_workaround, %edx +/* Without the gas bug workaround, the entire macro would consist only of the + * two lines below. + extractmask (((\carsize - \windowoffset) / 0x1000) - 4), %eax + extractmask (((\carsize - \windowoffset) / 0x1000)), %edx + */ +.endm + +#if CacheSize > 0x10000 +#error Invalid CAR size, must be at most 64k. +#endif +#if CacheSize < 0x1000 +#error Invalid CAR size, must be at least 4k. This is a processor limitation. +#endif +#if (CacheSize & (0x1000 - 1)) +#error Invalid CAR size, is not a multiple of 4k. This is a processor limitation. +#endif + +#if CacheSize > 0x8000 + /* enable caching for 32K-64K using fixed mtrr */ + movl $0x268, %ecx /* fix4k_c0000*/ + simplemask CacheSize, 0x8000 + wrmsr +#endif + + /* enable caching for 0-32K using fixed mtrr */ + movl $0x269, %ecx /* fix4k_c8000*/ + simplemask CacheSize, 0 + wrmsr + +#if defined(CONFIG_XIP_ROM_SIZE) && defined(CONFIG_XIP_ROM_BASE) +#if defined(CONFIG_TINY_BOOTBLOCK) && CONFIG_TINY_BOOTBLOCK +#define REAL_XIP_ROM_BASE AUTO_XIP_ROM_BASE +#else +#define REAL_XIP_ROM_BASE CONFIG_XIP_ROM_BASE +#endif + /* enable write base caching so we can do execute in place + * on the flash rom. + */ + movl $0x202, %ecx + xorl %edx, %edx + movl $REAL_XIP_ROM_BASE, %eax + orl $MTRR_TYPE_WRBACK, %eax + wrmsr + + movl $0x203, %ecx + movl $0x0000000f, %edx + movl $(~(CONFIG_XIP_ROM_SIZE - 1) | 0x800), %eax + wrmsr +#endif /* CONFIG_XIP_ROM_SIZE && CONFIG_XIP_ROM_BASE */ + + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff, %eax + movl %eax, %cr0 + + /* Read the range with lodsl*/ + movl $CacheBase, %esi + cld + movl $(CacheSize >> 2), %ecx + rep lodsl + + /* Clear the range */ + movl $CacheBase, %edi + movl $(CacheSize >> 2), %ecx + xorl %eax, %eax + rep stosl + + +#if 0 + /* check the cache as ram */ + movl $CacheBase, %esi + movl $(CacheSize>>2), %ecx +.xin1: + movl %esi, %eax + movl %eax, (%esi) + decl %ecx + je .xout1 + add $4, %esi + jmp .xin1 +.xout1: + + movl $CacheBase, %esi +// movl $(CacheSize>>2), %ecx + movl $4, %ecx +.xin1x: + movl %esi, %eax + + movl $0x4000, %edx + movb %ah, %al +.testx1: + outb %al, $0x80 + decl %edx + jnz .testx1 + + movl (%esi), %eax + cmpb 0xff, %al + je .xin2 /* dont show */ + + movl $0x4000, %edx +.testx2: + outb %al, $0x80 + decl %edx + jnz .testx2 + +.xin2: decl %ecx + je .xout1x + add $4, %esi + jmp .xin1x +.xout1x: + +#endif + + movl $(CacheBase + CacheSize - 4), %eax + movl %eax, %esp + + /* Load a different set of data segments */ +#if CONFIG_USE_INIT + movw $CACHE_RAM_DATA_SEG, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss +#endif + +lout: + /* Restore the BIST result */ + movl %ebp, %eax + + /* We need to set ebp ? No need */ + movl %esp, %ebp + pushl %eax /* bist */ + call main + + /* + FIXME : backup stack in CACHE_AS_RAM into mmx and sse and after we get STACK up, we restore that. + It is only needed if we want to go back + */ + + /* We don't need cache as ram for now on */ + /* disable cache */ + movl %cr0, %eax + orl $(0x1<<30),%eax + movl %eax, %cr0 + + /* clear sth */ + movl $0x269, %ecx /* fix4k_c8000*/ + xorl %edx, %edx + xorl %eax, %eax + wrmsr + +#if CONFIG_DCACHE_RAM_SIZE > 0x8000 + movl $0x268, %ecx /* fix4k_c0000*/ + wrmsr +#endif + + /* Set the default memory type and disable fixed and enable variable MTRRs */ + movl $0x2ff, %ecx +// movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx + /* Enable Variable and Disable Fixed MTRRs */ + movl $0x00000800, %eax + wrmsr + +#if defined(CLEAR_FIRST_1M_RAM) + /* enable caching for first 1M using variable mtrr */ + movl $0x200, %ecx + xorl %edx, %edx + movl $(0 | 1), %eax +// movl $(0 | MTRR_TYPE_WRCOMB), %eax + wrmsr + + movl $0x201, %ecx + movl $0x0000000f, %edx /* AMD 40 bit 0xff*/ + movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax + wrmsr +#endif + + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff,%eax + movl %eax, %cr0 + +#if defined(CLEAR_FIRST_1M_RAM) + /* clear the first 1M */ + movl $0x0, %edi + cld + movl $(0x100000>>2), %ecx + xorl %eax, %eax + rep stosl + + /* disable cache */ + movl %cr0, %eax + orl $(0x1<<30),%eax + movl %eax, %cr0 + + /* enable caching for first 1M using variable mtrr */ + movl $0x200, %ecx + xorl %edx, %edx + movl $(0 | 6), %eax +// movl $(0 | MTRR_TYPE_WRBACK), %eax + wrmsr + + movl $0x201, %ecx + movl $0x0000000f, %edx /* AMD 40 bit 0xff*/ + movl $((~(( 0 + 0x100000) - 1)) | 0x800), %eax + wrmsr + + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff,%eax + movl %eax, %cr0 + invd + + /* FIXME: I hope we don't need to change esp and ebp value here, so we + * can restore value from mmx sse back But the problem is the range is + * some io related, So don't go back + */ +#endif + + /* clear boot_complete flag */ + xorl %ebp, %ebp +__main: + post_code(0x11) + cld /* clear direction flag */ + + movl %ebp, %esi + + /* For now: use CONFIG_RAMBASE + 1MB - 64K (counting downwards) as stack. This + * makes sure that we stay completely within the 1M-64K of memory that we + * preserve for suspend/resume. + */ + +#ifndef HIGH_MEMORY_SAVE +#warning Need a central place for HIGH_MEMORY_SAVE +#define HIGH_MEMORY_SAVE ( (1024 - 64) * 1024 ) +#endif + movl $(CONFIG_RAMBASE + HIGH_MEMORY_SAVE), %esp + movl %esp, %ebp + pushl %esi + call copy_and_run + +.Lhlt: + post_code(0xee) + hlt + jmp .Lhlt + |