summaryrefslogtreecommitdiff
path: root/src/cpu/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/cpu/amd')
-rw-r--r--src/cpu/amd/car/cache_as_ram.inc224
1 files changed, 116 insertions, 108 deletions
diff --git a/src/cpu/amd/car/cache_as_ram.inc b/src/cpu/amd/car/cache_as_ram.inc
index a365ca8e3c..488aed32d1 100644
--- a/src/cpu/amd/car/cache_as_ram.inc
+++ b/src/cpu/amd/car/cache_as_ram.inc
@@ -18,76 +18,82 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#define CacheSize CONFIG_DCACHE_RAM_SIZE
-#define CacheBase (0xd0000 - CacheSize)
+#include <cpu/x86/mtrr.h>
+#include <cpu/amd/mtrr.h>
+
+#define CacheSize CONFIG_DCACHE_RAM_SIZE
+#define CacheBase (0xd0000 - CacheSize)
-/* leave some space for global variable to pass to RAM stage */
-#define GlobalVarSize CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
+/* Leave some space for global variable to pass to RAM stage. */
+#define GlobalVarSize CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-/* for CAR with FAM10 */
-#define CacheSizeAPStack 0x400 /* 1K */
+/* For CAR with Fam10h. */
+#define CacheSizeAPStack 0x400 /* 1K */
-#define MSR_MCFG_BASE 0xC0010058
-#define MSR_FAM10 0xC001102A
+#define MSR_MCFG_BASE 0xC0010058
+#define MSR_FAM10 0xC001102A
-#define jmp_if_k8(x) comisd %xmm2, %xmm1; jb x
+#define jmp_if_k8(x) comisd %xmm2, %xmm1; jb x
-#define CPUID_MASK 0x0ff00f00
+#define CPUID_MASK 0x0ff00f00
#define CPUID_VAL_FAM10_ROTATED 0x0f000010
-#include <cpu/x86/mtrr.h>
-#include <cpu/amd/mtrr.h>
/*
* XMM map:
- * xmm1: cpu family
- * xmm2: fam10 comparison value
- * xmm3: backup ebx
+ * xmm1: CPU family
+ * xmm2: Fam10h comparison value
+ * xmm3: Backup EBX
*/
- /* Save the BIST result */
+ /* Save the BIST result. */
movl %eax, %ebp
- /* for normal part %ebx already contain cpu_init_detected from fallback call */
+ /*
+ * For normal part %ebx already contain cpu_init_detected
+ * from fallback call.
+ */
cache_as_ram_setup:
post_code(0xa0)
- /* enable SSE */
- movl %cr4, %eax
- orl $(3<<9), %eax
- movl %eax, %cr4
+ /* Enable SSE. */
+ movl %cr4, %eax
+ orl $(3 << 9), %eax
+ movl %eax, %cr4
- /* figure out cpu family */
+ /* Figure out the CPU family. */
cvtsi2sd %ebx, %xmm3
movl $0x01, %eax
cpuid
- /* base family is bits 8..11, extended family is bits 20..27 */
+ /* Base family is bits 8..11, extended family is bits 20..27. */
andl $CPUID_MASK, %eax
- /* reorder bits for easier comparison by value */
+ /* Reorder bits for easier comparison by value. */
roll $0x10, %eax
cvtsi2sd %eax, %xmm1
movl $CPUID_VAL_FAM10_ROTATED, %eax
cvtsi2sd %eax, %xmm2
cvtsd2si %xmm3, %ebx
- /* check if cpu_init_detected */
+ /* Check if cpu_init_detected. */
movl $MTRRdefType_MSR, %ecx
rdmsr
andl $(1 << 11), %eax
- movl %eax, %ebx /* We store the status */
+ movl %eax, %ebx /* We store the status. */
jmp_if_k8(CAR_FAM10_out_post_errata)
- /* for GH, CAR need to set DRAM Base/Limit Registers to direct that to node0 */
-
- /* Only BSP needed, for other nodes set during HT/memory init. */
- /* So we need to check if it is BSP */
+ /*
+ * For GH, CAR need to set DRAM Base/Limit registers to direct that
+ * to node0.
+ * Only BSP needed, for other nodes set during HT/memory init.
+ * So we need to check if it is BSP.
+ */
movl $0x1b, %ecx
rdmsr
- bt $8, %eax /*BSC */
+ bt $8, %eax /* BSC */
jnc CAR_FAM10_out
- /* Enable RT tables on BSP */
+ /* Enable RT tables on BSP. */
movl $0x8000c06c, %eax
movw $0xcf8, %dx
outl %eax, %dx
@@ -96,7 +102,7 @@ cache_as_ram_setup:
btr $0, %eax
outl %eax, %dx
- /* Setup temporary DRAM map: [0,16M) bit 0-23 */
+ /* Setup temporary DRAM map: [0,16M) bit 0-23. */
movl $0x8000c144, %eax
movw $0xcf8, %dx
outl %eax, %dx
@@ -113,8 +119,9 @@ cache_as_ram_setup:
CAR_FAM10_out:
- /* Errata 193: Disable clean copybacks to L3 cache to allow cached ROM.
- * Re-enable it in after RAM is initialized and before CAR is disabled
+ /*
+ * Errata 193: Disable clean copybacks to L3 cache to allow cached ROM.
+ * Re-enable it in after RAM is initialized and before CAR is disabled.
*/
movl $MSR_FAM10, %ecx
rdmsr
@@ -122,23 +129,13 @@ CAR_FAM10_out:
wrmsr
/* Erratum 343, RevGuide for Fam10h, Pub#41322 Rev. 3.33 */
-
- /* read-address has to be stored in the ecx register */
movl $MSR_FAM10, %ecx
-
- /* execute special read command for msr-register. Result is then in the EDX:EAX-registers (MSBs in EDX) */
rdmsr
-
- /* Set bit 35 to 1 in EAX:EDX */
- bts $35-32, %edx
-
- /* write back the modified register EDX:EAX to the MSR specified in ECX */
+ bts $35-32, %edx /* Set bit 35 in EDX:EAX (bit 3 in EDX). */
wrmsr
- /* Erratum 343 end */
-
#if CONFIG_MMCONF_SUPPORT
- /* Set MMIO Config space BAR */
+ /* Set MMIO Config space BAR. */
movl $MSR_MCFG_BASE, %ecx
rdmsr
@@ -152,7 +149,7 @@ CAR_FAM10_out:
CAR_FAM10_out_post_errata:
- /* Set MtrrFixDramModEn for clear fixed mtrr */
+ /* Set MtrrFixDramModEn for clear fixed MTRR. */
enable_fixed_mtrr_dram_modify:
movl $SYSCFG_MSR, %ecx
rdmsr
@@ -160,7 +157,7 @@ enable_fixed_mtrr_dram_modify:
orl $SYSCFG_MSR_MtrrFixDramModEn, %eax
wrmsr
- /* Clear all MTRRs */
+ /* Clear all MTRRs. */
xorl %edx, %edx
movl $fixed_mtrr_msr, %esi
@@ -176,59 +173,63 @@ clear_fixed_var_mtrr:
jmp clear_fixed_var_mtrr
clear_fixed_var_mtrr_out:
-/* 0x06 is the WB IO type for a given 4k segment.
+/*
+ * 0x06 is the WB IO type for a given 4k segment.
* 0x1e is the MEM IO type for a given 4k segment (K10 and above).
* segs is the number of 4k segments in the area of the particular
- * register we want to use for CAR.
+ * register we want to use for CAR.
* reg is the register where the IO type should be stored.
*/
.macro extractmask segs, reg
.if \segs <= 0
- /* The xorl here is superfluous because at the point of first execution
+ /*
+ * The xorl here is superfluous because at the point of first execution
* of this macro, %eax and %edx are cleared. Later invocations of this
* macro will have a monotonically increasing segs parameter.
*/
- xorl \reg, \reg
+ xorl \reg, \reg
.else
jmp_if_k8(1f)
.if \segs == 1
- movl $0x1e000000, \reg /* WB MEM type */
+ movl $0x1e000000, \reg /* WB MEM type */
.elseif \segs == 2
- movl $0x1e1e0000, \reg /* WB MEM type */
+ movl $0x1e1e0000, \reg /* WB MEM type */
.elseif \segs == 3
- movl $0x1e1e1e00, \reg /* WB MEM type */
+ movl $0x1e1e1e00, \reg /* WB MEM type */
.elseif \segs >= 4
- movl $0x1e1e1e1e, \reg /* WB MEM type */
+ movl $0x1e1e1e1e, \reg /* WB MEM type */
.endif
jmp 2f
1:
.if \segs == 1
- movl $0x06000000, \reg /* WB IO type */
+ movl $0x06000000, \reg /* WB IO type */
.elseif \segs == 2
- movl $0x06060000, \reg /* WB IO type */
+ movl $0x06060000, \reg /* WB IO type */
.elseif \segs == 3
- movl $0x06060600, \reg /* WB IO type */
+ movl $0x06060600, \reg /* WB IO type */
.elseif \segs >= 4
- movl $0x06060606, \reg /* WB IO type */
+ movl $0x06060606, \reg /* WB IO type */
.endif
2:
.endif /* if \segs <= 0 */
.endm
-/* size is the cache size in bytes we want to use for CAR.
- * windowoffset is the 32k-aligned window into CAR size
+/*
+ * size is the cache size in bytes we want to use for CAR.
+ * windowoffset is the 32k-aligned window into CAR size.
*/
.macro simplemask carsize, windowoffset
.set gas_bug_workaround,(((\carsize - \windowoffset) / 0x1000) - 4)
extractmask gas_bug_workaround, %eax
.set gas_bug_workaround,(((\carsize - \windowoffset) / 0x1000))
extractmask gas_bug_workaround, %edx
-/* Without the gas bug workaround, the entire macro would consist only of the
- * two lines below.
- extractmask (((\carsize - \windowoffset) / 0x1000) - 4), %eax
- extractmask (((\carsize - \windowoffset) / 0x1000)), %edx
- */
+ /*
+ * Without the gas bug workaround, the entire macro would consist
+ * only of the two lines below:
+ * extractmask (((\carsize - \windowoffset) / 0x1000) - 4), %eax
+ * extractmask (((\carsize - \windowoffset) / 0x1000)), %edx
+ */
.endm
#if CacheSize > 0x10000
@@ -242,18 +243,18 @@ clear_fixed_var_mtrr_out:
#endif
#if CacheSize > 0x8000
- /* enable caching for 32K-64K using fixed mtrr */
+ /* Enable caching for 32K-64K using fixed MTRR. */
movl $MTRRfix4K_C0000_MSR, %ecx
simplemask CacheSize, 0x8000
wrmsr
#endif
- /* enable caching for 0-32K using fixed mtrr */
+ /* Enable caching for 0-32K using fixed MTRR. */
movl $MTRRfix4K_C8000_MSR, %ecx
simplemask CacheSize, 0
wrmsr
- /* enable memory access for first MBs using top_mem */
+ /* Enable memory access for first MBs using top_mem. */
movl $TOP_MEM, %ecx
xorl %edx, %edx
movl $(((CONFIG_RAMTOP) + TOP_MEM_MASK) & ~TOP_MEM_MASK) , %eax
@@ -267,13 +268,13 @@ clear_fixed_var_mtrr_out:
#define REAL_XIP_ROM_BASE CONFIG_XIP_ROM_BASE
#endif
- /* enable write base caching so we can do execute in place
- * on the flash rom.
+ /* Enable write base caching so we can do execute in place (XIP)
+ * on the flash ROM.
*/
movl $MTRRphysBase_MSR(1), %ecx
xorl %edx, %edx
- movl $REAL_XIP_ROM_BASE, %eax
- orl $MTRR_TYPE_WRBACK, %eax
+ movl $REAL_XIP_ROM_BASE, %eax
+ orl $MTRR_TYPE_WRBACK, %eax
wrmsr
movl $MTRRphysMask_MSR(1), %ecx
@@ -285,14 +286,13 @@ wbcache_post_fam10_setup:
wrmsr
#endif /* CONFIG_XIP_ROM_SIZE && CONFIG_XIP_ROM_BASE */
- /* Set the default memory type and enable fixed and variable MTRRs */
+ /* Set the default memory type and enable fixed and variable MTRRs. */
movl $MTRRdefType_MSR, %ecx
xorl %edx, %edx
- /* Enable Variable and Fixed MTRRs */
- movl $0x00000c00, %eax
+ movl $0x00000c00, %eax /* Enable variable and fixed MTRRs. */
wrmsr
- /* Enable the MTRRs and IORRs in SYSCFG */
+ /* Enable the MTRRs and IORRs in SYSCFG. */
movl $SYSCFG_MSR, %ecx
rdmsr
orl $(SYSCFG_MSR_MtrrVarDramEn | SYSCFG_MSR_MtrrFixDramEn), %eax
@@ -300,35 +300,35 @@ wbcache_post_fam10_setup:
post_code(0xa1)
- /* enable cache */
+ /* Enable cache. */
movl %cr0, %eax
andl $0x9fffffff, %eax
movl %eax, %cr0
jmp_if_k8(fam10_end_part1)
- /* So we need to check if it is BSP */
+ /* So we need to check if it is BSP. */
movl $0x1b, %ecx
rdmsr
- bt $8, %eax /*BSC */
+ bt $8, %eax /* BSC */
jnc CAR_FAM10_ap
fam10_end_part1:
post_code(0xa2)
- /* Read the range with lodsl*/
+ /* Read the range with lodsl. */
cld
movl $CacheBase, %esi
movl $(CacheSize >> 2), %ecx
rep lodsl
- /* Clear the range */
+ /* Clear the range. */
movl $CacheBase, %edi
movl $(CacheSize >> 2), %ecx
xorl %eax, %eax
rep stosl
- /* set up the stack pointer */
+ /* Set up the stack pointer. */
movl $(CacheBase + CacheSize - GlobalVarSize), %eax
movl %eax, %esp
@@ -336,42 +336,47 @@ fam10_end_part1:
jmp CAR_FAM10_ap_out
CAR_FAM10_ap:
- /* need to set stack pointer for AP */
- /* it will be from CacheBase + (CacheSize - GlobalVarSize)/2 - (NodeID<<CoreIDbits + CoreID) * CacheSizeAPStack*/
- /* So need to get the NodeID and CoreID at first */
- /* If NB_CFG bit 54 is set just use initial apicid, otherwise need to reverse it */
+ /*
+ * Need to set stack pointer for AP.
+ * It will be from:
+ * CacheBase + (CacheSize - GlobalVarSize) / 2
+ * - (NodeID << CoreIDbits + CoreID) * CacheSizeAPStack
+ * So need to get the NodeID and CoreID at first.
+ * If NB_CFG bit 54 is set just use initial APIC ID, otherwise need
+ * to reverse it.
+ */
- /* store our init detected */
+ /* Store our init detected. */
movl %ebx, %esi
- /* get the coreid bits at first */
+ /* Get the coreid bits at first. */
movl $0x80000008, %eax
cpuid
shrl $12, %ecx
andl $0x0f, %ecx
movl %ecx, %edi
- /* get the initial apic id */
+ /* Get the initial APIC ID. */
movl $1, %eax
cpuid
shrl $24, %ebx
- /* get the nb cfg bit 54 */
- movl $0xc001001f, %ecx /* NB_CFG_MSR */
+ /* Get the nb cfg bit 54. */
+ movl $0xc001001f, %ecx /* NB_CFG_MSR */
rdmsr
- movl %edi, %ecx /* CoreID bits */
+ movl %edi, %ecx /* CoreID bits */
bt $(54-32), %edx
jc roll_cfg
rolb %cl, %bl
roll_cfg:
- /* calculate stack pointer */
+ /* Calculate stack pointer. */
movl $CacheSizeAPStack, %eax
mull %ebx
- movl $(CacheBase + (CacheSize - GlobalVarSize)/2), %esp
+ movl $(CacheBase + (CacheSize - GlobalVarSize) / 2), %esp
subl %eax, %esp
- /* retrive init detected */
+ /* Retrive init detected. */
movl %esi, %ebx
post_code(0xa4)
@@ -380,35 +385,38 @@ CAR_FAM10_ap_out:
post_code(0xa5)
- /* disable SSE */
- movl %cr4, %eax
- andl $~(3<<9), %eax
- movl %eax, %cr4
+ /* Disable SSE. */
+ movl %cr4, %eax
+ andl $~(3 << 9), %eax
+ movl %eax, %cr4
- /* Restore the BIST result */
+ /* Restore the BIST result. */
movl %ebp, %eax
- /* We need to set ebp ? No need */
+ /* We need to set EBP? No need. */
movl %esp, %ebp
- pushl %ebx /* init detected */
- pushl %eax /* bist */
+ pushl %ebx /* Init detected. */
+ pushl %eax /* BIST */
call cache_as_ram_main
- /* We will not go back */
+ /* We will not go back. */
- post_code(0xaf) /* Should never see this postcode */
+ post_code(0xaf) /* Should never see this POST code. */
fixed_mtrr_msr:
.long 0x250, 0x258, 0x259
.long 0x268, 0x269, 0x26A
.long 0x26B, 0x26C, 0x26D
.long 0x26E, 0x26F
+
var_mtrr_msr:
.long 0x200, 0x201, 0x202, 0x203
.long 0x204, 0x205, 0x206, 0x207
.long 0x208, 0x209, 0x20A, 0x20B
.long 0x20C, 0x20D, 0x20E, 0x20F
+
var_iorr_msr:
.long 0xC0010016, 0xC0010017, 0xC0010018, 0xC0010019
+
mem_top:
.long 0xC001001A, 0xC001001D
.long 0x000 /* NULL, end of table */