summaryrefslogtreecommitdiff
path: root/src/cpu/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/cpu/amd')
-rw-r--r--src/cpu/amd/dualcore/amd_sibling.c32
-rw-r--r--src/cpu/amd/dualcore/dualcore.c18
-rw-r--r--src/cpu/amd/dualcore/dualcore_id.c24
-rw-r--r--src/cpu/amd/family_10h-family_15h/fidvid.c172
-rw-r--r--src/cpu/amd/family_10h-family_15h/tsc_freq.c10
-rw-r--r--src/cpu/amd/family_10h-family_15h/update_microcode.c4
-rw-r--r--src/cpu/amd/model_fxx/model_fxx_init.c6
-rw-r--r--src/cpu/amd/model_fxx/model_fxx_update_microcode.c40
8 files changed, 153 insertions, 153 deletions
diff --git a/src/cpu/amd/dualcore/amd_sibling.c b/src/cpu/amd/dualcore/amd_sibling.c
index 20f22fc49e..1c003c8319 100644
--- a/src/cpu/amd/dualcore/amd_sibling.c
+++ b/src/cpu/amd/dualcore/amd_sibling.c
@@ -51,17 +51,17 @@ static int get_max_siblings(int nodes)
static void enable_apic_ext_id(int nodes)
{
- device_t dev;
- int nodeid;
-
- //enable APIC_EXIT_ID all the nodes
- for (nodeid=0; nodeid<nodes; nodeid++){
- uint32_t val;
- dev = dev_find_slot(0, PCI_DEVFN(0x18+nodeid, 0));
- val = pci_read_config32(dev, 0x68);
+ device_t dev;
+ int nodeid;
+
+ //enable APIC_EXIT_ID all the nodes
+ for (nodeid=0; nodeid<nodes; nodeid++){
+ uint32_t val;
+ dev = dev_find_slot(0, PCI_DEVFN(0x18+nodeid, 0));
+ val = pci_read_config32(dev, 0x68);
val |= (1<<17)|(1<<18);
pci_write_config32(dev, 0x68, val);
- }
+ }
}
@@ -72,13 +72,13 @@ unsigned get_apicid_base(unsigned ioapic_num)
unsigned apicid_base;
int siblings;
unsigned nb_cfg_54;
- int bsp_apic_id = lapicid(); // bsp apicid
+ int bsp_apic_id = lapicid(); // bsp apicid
- get_option(&disable_siblings, "multi_core");
+ get_option(&disable_siblings, "multi_core");
- //get the nodes number
- dev = dev_find_slot(0, PCI_DEVFN(0x18,0));
- nodes = ((pci_read_config32(dev, 0x60)>>4) & 7) + 1;
+ //get the nodes number
+ dev = dev_find_slot(0, PCI_DEVFN(0x18,0));
+ nodes = ((pci_read_config32(dev, 0x60)>>4) & 7) + 1;
siblings = get_max_siblings(nodes);
@@ -111,9 +111,9 @@ unsigned get_apicid_base(unsigned ioapic_num)
and the kernel will try to get one that is small than 16 to make IOAPIC work.
I don't know when the kernel can support 256 APIC id. (APIC_EXT_ID is enabled) */
- //4:10 for two way 8:12 for four way 16:16 for eight way
+ //4:10 for two way 8:12 for four way 16:16 for eight way
//Use CONFIG_MAX_PHYSICAL_CPUS instead of nodes for better consistency?
- apicid_base = nb_cfg_54 ? (siblings+1) * nodes : 8 * siblings + nodes;
+ apicid_base = nb_cfg_54 ? (siblings+1) * nodes : 8 * siblings + nodes;
}
else {
diff --git a/src/cpu/amd/dualcore/dualcore.c b/src/cpu/amd/dualcore/dualcore.c
index 56f7dcc65e..79e9162c77 100644
--- a/src/cpu/amd/dualcore/dualcore.c
+++ b/src/cpu/amd/dualcore/dualcore.c
@@ -18,16 +18,16 @@ static inline unsigned get_core_num_in_bsp(unsigned nodeid)
static inline uint8_t set_apicid_cpuid_lo(void)
{
#if !CONFIG_K8_REV_F_SUPPORT
- if (is_cpu_pre_e0()) return 0; // pre_e0 can not be set
+ if (is_cpu_pre_e0()) return 0; // pre_e0 can not be set
#endif
- // set the NB_CFG[54]=1; why the OS will be happy with that ???
- msr_t msr;
- msr = rdmsr(NB_CFG_MSR);
- msr.hi |= (1<<(54-32)); // InitApicIdCpuIdLo
- wrmsr(NB_CFG_MSR, msr);
+ // set the NB_CFG[54]=1; why the OS will be happy with that ???
+ msr_t msr;
+ msr = rdmsr(NB_CFG_MSR);
+ msr.hi |= (1<<(54-32)); // InitApicIdCpuIdLo
+ wrmsr(NB_CFG_MSR, msr);
- return 1;
+ return 1;
}
static inline void real_start_other_core(unsigned nodeid)
@@ -53,9 +53,9 @@ static inline void start_other_cores(void)
return; // disable multi_core
}
- nodes = get_nodes();
+ nodes = get_nodes();
- for (nodeid=0; nodeid<nodes; nodeid++) {
+ for (nodeid=0; nodeid<nodes; nodeid++) {
if ( get_core_num_in_bsp(nodeid) > 0) {
real_start_other_core(nodeid);
}
diff --git a/src/cpu/amd/dualcore/dualcore_id.c b/src/cpu/amd/dualcore/dualcore_id.c
index bbfdd511e9..665f256f78 100644
--- a/src/cpu/amd/dualcore/dualcore_id.c
+++ b/src/cpu/amd/dualcore/dualcore_id.c
@@ -9,9 +9,9 @@
//called by bus_cpu_scan too
unsigned int read_nb_cfg_54(void)
{
- msr_t msr;
- msr = rdmsr(NB_CFG_MSR);
- return ( ( msr.hi >> (54-32)) & 1);
+ msr_t msr;
+ msr = rdmsr(NB_CFG_MSR);
+ return ( ( msr.hi >> (54-32)) & 1);
}
u32 get_initial_apicid(void)
@@ -27,17 +27,17 @@ struct node_core_id get_node_core_id(unsigned nb_cfg_54)
struct node_core_id id;
// get the apicid via cpuid(1) ebx[27:24]
if ( nb_cfg_54) {
- // when NB_CFG[54] is set, nodeid = ebx[27:25], coreid = ebx[24]
- id.coreid = (cpuid_ebx(1) >> 24) & 0xf;
- id.nodeid = (id.coreid>>CORE_ID_BIT);
- id.coreid &= ((1<<CORE_ID_BIT)-1);
- }
+ // when NB_CFG[54] is set, nodeid = ebx[27:25], coreid = ebx[24]
+ id.coreid = (cpuid_ebx(1) >> 24) & 0xf;
+ id.nodeid = (id.coreid>>CORE_ID_BIT);
+ id.coreid &= ((1<<CORE_ID_BIT)-1);
+ }
else
{
- // when NB_CFG[54] is clear, nodeid = ebx[26:24], coreid = ebx[27]
- id.nodeid = (cpuid_ebx(1) >> 24) & 0xf;
- id.coreid = (id.nodeid>>NODE_ID_BIT);
- id.nodeid &= ((1<<NODE_ID_BIT)-1);
+ // when NB_CFG[54] is clear, nodeid = ebx[26:24], coreid = ebx[27]
+ id.nodeid = (cpuid_ebx(1) >> 24) & 0xf;
+ id.coreid = (id.nodeid>>NODE_ID_BIT);
+ id.nodeid &= ((1<<NODE_ID_BIT)-1);
}
return id;
}
diff --git a/src/cpu/amd/family_10h-family_15h/fidvid.c b/src/cpu/amd/family_10h-family_15h/fidvid.c
index 2e6e153508..2eb55e8499 100644
--- a/src/cpu/amd/family_10h-family_15h/fidvid.c
+++ b/src/cpu/amd/family_10h-family_15h/fidvid.c
@@ -28,15 +28,15 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010
2.- COF/VID :
2.4.2.9.1 Steps 1,3-6 and warning for 2,7 if they apply
- fixPsNbVidBeforeWR(...)
+ fixPsNbVidBeforeWR(...)
2.4.2.9.1 Step 8 enable_fid_change
- We do this for all nodes, I don't understand BKDG 100% on
- whether this is or isn't meant by "on the local
- processor". Must be OK.
+ We do this for all nodes, I don't understand BKDG 100% on
+ whether this is or isn't meant by "on the local
+ processor". Must be OK.
2.4.2.9.1 Steps 9-10 (repeat 1-7 and reset) romstage.c/init_cpus ?
2.4.2.9.1 Steps 11-12 init_fidvid_stage2
2.4.2.9.2 DualPlane PVI : Not supported, don't know how to detect,
- needs specific circuitry.
+ needs specific circuitry.
3.- 2.4.2.7 dualPlaneOnly(dev)
@@ -49,12 +49,12 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010
b) setVSRamp(), called from prep_fid_change
c) prep_fid_change
d) improperly, for lack of voltage regulator details?,
- F3xA0[PsiVidEn] in defaults.h
- F3xA0[PsiVid] in init_cpus.c AMD_SetupPSIVID_d (before prep_fid_change)
+ F3xA0[PsiVidEn] in defaults.h
+ F3xA0[PsiVid] in init_cpus.c AMD_SetupPSIVID_d (before prep_fid_change)
7.- TODO (Core Performance Boost is only available in revision E cpus, and we
- don't seem to support those yet, at least they don't have any
- constant in amddefs.h )
+ don't seem to support those yet, at least they don't have any
+ constant in amddefs.h )
8.- FIXME ? Transition to min Pstate according to 2.4.2.15.3 is required
by 2.4.2.6 after warm reset. But 2.4.2.15 states that it is not required
@@ -250,13 +250,13 @@ static int vidTo100uV(u8 vid)
static void setVSRamp(device_t dev) {
/* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSRampTime]
- * If this field accepts 8 values between 10 and 500 us why
- * does page 324 say "BIOS should set this field to 001b."
- * (20 us) ?
- * Shouldn't it depend on the voltage regulators, mainboard
- * or something ?
- */
- u32 dword;
+ * If this field accepts 8 values between 10 and 500 us why
+ * does page 324 say "BIOS should set this field to 001b."
+ * (20 us) ?
+ * Shouldn't it depend on the voltage regulators, mainboard
+ * or something ?
+ */
+ u32 dword;
dword = pci_read_config32(dev, 0xd8);
dword &= VSRAMP_MASK;
dword |= VSRAMP_VALUE;
@@ -274,12 +274,12 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
/* This function calculates the VsSlamTime using the range of possible
* voltages instead of a hardcoded 200us.
- * Note: his function is called only from prep_fid_change,
- * and that from init_cpus.c finalize_node_setup()
- * (after set AMD MSRs and init ht )
+ * Note: his function is called only from prep_fid_change,
+ * and that from init_cpus.c finalize_node_setup()
+ * (after set AMD MSRs and init ht )
*/
- /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSSlamTime] */
+ /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSSlamTime] */
/* Calculate Slam Time
* Vslam = (mobileCPU?0.2:0.4)us/mV * (Vp0 - (lowest out of Vpmin or Valt)) mV
* In our case, we will scale the values by 100 to avoid
@@ -299,16 +299,16 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
}
/* Get P0's voltage */
- /* MSRC001_00[68:64] are not programmed yet when called from
+ /* MSRC001_00[68:64] are not programmed yet when called from
prep_fid_change, one might use F4x1[F0:E0] instead, but
theoretically MSRC001_00[68:64] are equal to them after
reset. */
msr = rdmsr(0xC0010064);
highVoltageVid = (u8) ((msr.lo >> PS_CPU_VID_SHFT) & 0x7F);
- if (!(msr.hi & 0x80000000)) {
+ if (!(msr.hi & 0x80000000)) {
printk(BIOS_ERR,"P-state info in MSRC001_0064 is invalid !!!\n");
- highVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0)
- >> PS_CPU_VID_SHFT) & 0x7F);
+ highVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0)
+ >> PS_CPU_VID_SHFT) & 0x7F);
}
/* If SVI, we only care about CPU VID.
@@ -327,15 +327,15 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
/* Get PSmax's VID */
msr = rdmsr(0xC0010064 + bValue);
lowVoltageVid = (u8) ((msr.lo >> PS_CPU_VID_SHFT) & 0x7F);
- if (!(msr.hi & 0x80000000)) {
+ if (!(msr.hi & 0x80000000)) {
printk(BIOS_ERR,"P-state info in MSR%8x is invalid !!!\n",0xC0010064 + bValue);
- lowVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0+(bValue*4))
- >> PS_CPU_VID_SHFT) & 0x7F);
+ lowVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0+(bValue*4))
+ >> PS_CPU_VID_SHFT) & 0x7F);
}
/* If SVI, we only care about CPU VID.
* If PVI, determine the higher voltage b/t NB and CPU
- * BKDG 2.4.1.7 (a)
+ * BKDG 2.4.1.7 (a)
*/
if (pviModeFlag) {
bValue = (u8) ((msr.lo >> PS_NB_VID_SHFT) & 0x7F);
@@ -351,7 +351,7 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
if (lowVoltageVid < bValue)
lowVoltageVid = bValue;
- u8 mobileFlag = get_platform_type() & AMD_PTYPE_MOB;
+ u8 mobileFlag = get_platform_type() & AMD_PTYPE_MOB;
minimumSlamTime = (mobileFlag?2:4) * (vidTo100uV(highVoltageVid) - vidTo100uV(lowVoltageVid)); /* * 0.01 us */
@@ -372,20 +372,20 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
}
static u32 nb_clk_did(uint8_t node, uint64_t cpuRev, uint8_t procPkg) {
- uint8_t link0isGen3 = 0;
- uint8_t offset;
- if (AMD_CpuFindCapability(node, 0, &offset)) {
+ uint8_t link0isGen3 = 0;
+ uint8_t offset;
+ if (AMD_CpuFindCapability(node, 0, &offset)) {
link0isGen3 = (AMD_checkLinkType(node, offset) & HTPHY_LINKTYPE_HT3 );
}
- /* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package
- S1g3 in link Gen3 mode, but I don't know how to tell
- package S1g3 from S1g4 */
+ /* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package
+ S1g3 in link Gen3 mode, but I don't know how to tell
+ package S1g3 from S1g4 */
if ((cpuRev & AMD_DA_C2) && (procPkg & AMD_PKGTYPE_S1gX)
- && link0isGen3) {
+ && link0isGen3) {
return 5 ; /* divide clk by 128*/
- } else {
+ } else {
return 4 ; /* divide clk by 16 */
- }
+ }
}
@@ -447,7 +447,7 @@ static u32 power_up_down(int node, u8 procPkg) {
}
static void config_clk_power_ctrl_reg0(uint8_t node, uint64_t cpuRev, uint8_t procPkg) {
- device_t dev = NODE_PCI(node, 3);
+ device_t dev = NODE_PCI(node, 3);
/* Program fields in Clock Power/Control register0 (F3xD4) */
@@ -458,14 +458,14 @@ static void config_clk_power_ctrl_reg0(uint8_t node, uint64_t cpuRev, uint8_t pr
* PowerStepDown= "platform dependent"
* LinkPllLink=01b
* ClkRampHystCtl=HW default
- * ClkRampHystSel=1111b
+ * ClkRampHystSel=1111b
*/
- uint32_t dword= pci_read_config32(dev, 0xd4);
+ uint32_t dword= pci_read_config32(dev, 0xd4);
dword &= CPTC0_MASK;
- dword |= NB_CLKDID_ALL | LNK_PLL_LOCK | CLK_RAMP_HYST_SEL_VAL;
- dword |= (nb_clk_did(node,cpuRev,procPkg) << NB_CLKDID_SHIFT);
+ dword |= NB_CLKDID_ALL | LNK_PLL_LOCK | CLK_RAMP_HYST_SEL_VAL;
+ dword |= (nb_clk_did(node,cpuRev,procPkg) << NB_CLKDID_SHIFT);
- dword |= power_up_down(node, procPkg);
+ dword |= power_up_down(node, procPkg);
pci_write_config32(dev, 0xd4, dword);
@@ -484,19 +484,19 @@ static void config_power_ctrl_misc_reg(device_t dev, uint64_t cpuRev, uint8_t pr
/* set slamVidMode to 1 for SVI */
dword |= VID_SLAM_ON;
}
- /* set the rest of A0 since we're at it... */
+ /* set the rest of A0 since we're at it... */
if (cpuRev & (AMD_DA_Cx | AMD_RB_C3 )) {
dword |= NB_PSTATE_FORCE_ON;
} // else should we clear it ?
- if ((procPkg == AMD_PKGTYPE_G34) || (procPkg == AMD_PKGTYPE_C32) ) {
+ if ((procPkg == AMD_PKGTYPE_G34) || (procPkg == AMD_PKGTYPE_C32) ) {
dword |= BP_INS_TRI_EN_ON ;
}
/* TODO: look into C1E state and F3xA0[IdleExitEn]*/
- #if CONFIG_SVI_HIGH_FREQ
+ #if CONFIG_SVI_HIGH_FREQ
if (cpuRev & AMD_FAM10_C3) {
dword |= SVI_HIGH_FREQ_ON;
}
@@ -508,10 +508,10 @@ static void config_nb_syn_ptr_adj(device_t dev, uint64_t cpuRev) {
/* Note the following settings are additional from the ported
* function setFidVidRegs()
*/
- /* adjust FIFO between nb and core clocks to max allowed
- values (min latency) */
+ /* adjust FIFO between nb and core clocks to max allowed
+ values (min latency) */
uint32_t nbPstate = pci_read_config32(dev,0x1f0) & NB_PSTATE_MASK;
- uint8_t nbSynPtrAdj;
+ uint8_t nbSynPtrAdj;
if ((cpuRev & (AMD_DR_Bx | AMD_DA_Cx | AMD_FAM15_ALL) )
|| ((cpuRev & AMD_RB_C3) && (nbPstate != 0))) {
nbSynPtrAdj = 5;
@@ -520,9 +520,9 @@ static void config_nb_syn_ptr_adj(device_t dev, uint64_t cpuRev) {
}
uint32_t dword = pci_read_config32(dev, 0xdc);
- dword &= ~NB_SYN_PTR_ADJ_MASK;
+ dword &= ~NB_SYN_PTR_ADJ_MASK;
dword |= nbSynPtrAdj << NB_SYN_PTR_ADJ_POS;
- /* NbsynPtrAdj set to 5 or 6 per BKDG (needs reset) */
+ /* NbsynPtrAdj set to 5 or 6 per BKDG (needs reset) */
pci_write_config32(dev, 0xdc, dword);
}
@@ -592,7 +592,7 @@ static void config_acpi_pwr_state_ctrl_regs(device_t dev, uint64_t cpuRev, uint8
static void prep_fid_change(void)
{
- u32 dword;
+ u32 dword;
u32 nodes;
device_t dev;
int i;
@@ -604,8 +604,8 @@ static void prep_fid_change(void)
for (i = 0; i < nodes; i++) {
printk(BIOS_DEBUG, "Prep FID/VID Node:%02x\n", i);
dev = NODE_PCI(i, 3);
- uint64_t cpuRev = mctGetLogicalCPUID(0xFF) ;
- u8 procPkg = mctGetProcessorPackageType();
+ uint64_t cpuRev = mctGetLogicalCPUID(0xFF) ;
+ u8 procPkg = mctGetProcessorPackageType();
setVSRamp(dev);
/* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSSlamTime] */
@@ -614,7 +614,7 @@ static void prep_fid_change(void)
config_clk_power_ctrl_reg0(i,cpuRev,procPkg);
- config_power_ctrl_misc_reg(dev,cpuRev,procPkg);
+ config_power_ctrl_misc_reg(dev,cpuRev,procPkg);
config_nb_syn_ptr_adj(dev,cpuRev);
config_acpi_pwr_state_ctrl_regs(dev,cpuRev,procPkg);
@@ -696,7 +696,7 @@ static void set_pstate(u32 nonBoostedPState) {
if (!skip_wait) {
/* Wait for core to transition to P0 */
- waitCurrentPstate(nonBoostedPState);
+ waitCurrentPstate(nonBoostedPState);
}
}
@@ -737,8 +737,8 @@ static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode)
* transition to P1 on all cores,
* then transition to P0 on core 0.
* Wait for MSRC001_0063[CurPstate] = 000b on core 0.
- * see BKDG rev 3.48 2.4.2.9.1 BIOS NB COF and VID Configuration
- * for SVI and Single-Plane PVI Systems
+ * see BKDG rev 3.48 2.4.2.9.1 BIOS NB COF and VID Configuration
+ * for SVI and Single-Plane PVI Systems
*/
msr = rdmsr(0xc0010071);
@@ -752,12 +752,12 @@ static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode)
wrmsr(0xC0010065, msr);
wrmsr(0xC0010064, msr);
- /* missing step 2 from BDKG , F3xDC[PstateMaxVal] =
- * max(1,F3xDC[PstateMaxVal] ) because it would take
- * synchronization between cores and we don't think
- * PstatMaxVal is going to be 0 on cold reset anyway ?
+ /* missing step 2 from BDKG , F3xDC[PstateMaxVal] =
+ * max(1,F3xDC[PstateMaxVal] ) because it would take
+ * synchronization between cores and we don't think
+ * PstatMaxVal is going to be 0 on cold reset anyway ?
*/
- if (!(pci_read_config32(dev, 0xdc) & (~PS_MAX_VAL_MASK))) {
+ if (!(pci_read_config32(dev, 0xdc) & (~PS_MAX_VAL_MASK))) {
printk(BIOS_ERR,"F3xDC[PstateMaxVal] is zero. Northbridge voltage setting will fail. fixPsNbVidBeforeWR in fidvid.c needs fixing. See AMD # 31116 rev 3.48 BKDG 2.4.2.9.1\n");
};
@@ -767,13 +767,13 @@ static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode)
if (pviMode) { /* single plane*/
UpdateSinglePlaneNbVid();
- }
+ }
// Transition to P1 for all APs and P0 for core0.
- set_pstate(1);
+ set_pstate(1);
if (coreid == 0) {
- set_pstate(0);
+ set_pstate(0);
}
/* missing step 7 (restore PstateMax to 0 if needed) because
@@ -795,11 +795,11 @@ static u32 needs_NB_COF_VID_update(void)
nodes = get_nodes();
nb_cof_vid_update = 0;
for (i = 0; i < nodes; i++) {
- uint64_t cpuRev = mctGetLogicalCPUID(i);
- u32 nbCofVidUpdateDefined = (cpuRev & (AMD_FAM10_LT_D));
+ uint64_t cpuRev = mctGetLogicalCPUID(i);
+ u32 nbCofVidUpdateDefined = (cpuRev & (AMD_FAM10_LT_D));
if (nbCofVidUpdateDefined
- && (pci_read_config32(NODE_PCI(i, 3), 0x1FC)
- & NB_COF_VID_UPDATE_MASK)) {
+ && (pci_read_config32(NODE_PCI(i, 3), 0x1FC)
+ & NB_COF_VID_UPDATE_MASK)) {
nb_cof_vid_update = 1;
break;
}
@@ -827,11 +827,11 @@ static u32 init_fidvid_core(u32 nodeid, u32 coreid)
reg1fc = pci_read_config32(dev, 0x1FC);
if (nb_cof_vid_update) {
- vid_max = (reg1fc & SINGLE_PLANE_NB_VID_MASK ) >> SINGLE_PLANE_NB_VID_SHIFT ;
- fid_max = (reg1fc & SINGLE_PLANE_NB_FID_MASK ) >> SINGLE_PLANE_NB_FID_SHIFT ;
+ vid_max = (reg1fc & SINGLE_PLANE_NB_VID_MASK ) >> SINGLE_PLANE_NB_VID_SHIFT ;
+ fid_max = (reg1fc & SINGLE_PLANE_NB_FID_MASK ) >> SINGLE_PLANE_NB_FID_SHIFT ;
- if (!pvimode) { /* SVI, dual power plane */
- vid_max = vid_max - ((reg1fc & DUAL_PLANE_NB_VID_OFF_MASK ) >> DUAL_PLANE_NB_VID_SHIFT );
+ if (!pvimode) { /* SVI, dual power plane */
+ vid_max = vid_max - ((reg1fc & DUAL_PLANE_NB_VID_OFF_MASK ) >> DUAL_PLANE_NB_VID_SHIFT );
fid_max = fid_max + ((reg1fc & DUAL_PLANE_NB_FID_OFF_MASK ) >> DUAL_PLANE_NB_FID_SHIFT );
}
/* write newNbVid to P-state Reg's NbVid always if NbVidUpdatedAll=1 */
@@ -855,7 +855,7 @@ static void init_fidvid_ap(u32 apicid, u32 nodeid, u32 coreid)
printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid);
- send = init_fidvid_core(nodeid, coreid);
+ send = init_fidvid_core(nodeid, coreid);
send |= (apicid << 24); // ap apicid
// Send signal to BSP about this AP max fid
@@ -925,7 +925,7 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode)
u8 StartupPstate;
/* BKDG 2.4.2.9.1 11-12
- * This function copies newNbVid to NbVid bits in P-state
+ * This function copies newNbVid to NbVid bits in P-state
* Registers[4:0] if its NbDid bit=0, and IddValue!=0 in case of
* NbVidUpdatedAll =0 or copies newNbVid to NbVid bits in
* P-state Registers[4:0] if its IddValue!=0 in case of
@@ -937,26 +937,26 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode)
msr = rdmsr(0xC0010064 + i);
/* NbDid (bit 22 of P-state Reg) == 0 or NbVidUpdatedAll = 1 */
if ( (msr.hi & PS_IDD_VALUE_MASK)
- && (msr.hi & PS_EN_MASK)
- &&(((msr.lo & PS_NB_DID_MASK) == 0) || NbVidUpdatedAll)) {
+ && (msr.hi & PS_EN_MASK)
+ &&(((msr.lo & PS_NB_DID_MASK) == 0) || NbVidUpdatedAll)) {
msr.lo &= PS_NB_VID_M_OFF;
msr.lo |= (newNbVid & 0x7F) << PS_NB_VID_SHFT;
wrmsr(0xC0010064 + i, msr);
}
}
- /* Not documented. Would overwrite Nb_Vids just copied
- * should we just update cpu_vid or nothing at all ?
+ /* Not documented. Would overwrite Nb_Vids just copied
+ * should we just update cpu_vid or nothing at all ?
*/
if (pviMode) { //single plane
- UpdateSinglePlaneNbVid();
+ UpdateSinglePlaneNbVid();
}
/* For each core in the system, transition all cores to StartupPstate */
msr = rdmsr(0xC0010071);
StartupPstate = msr.hi & 0x07;
/* Set and wait for StartupPstate to set. */
- set_pstate(StartupPstate);
+ set_pstate(StartupPstate);
}
@@ -1009,9 +1009,9 @@ static void init_fidvid_stage2(u32 apicid, u32 nodeid)
dtemp |= PLLLOCK_DFT_L;
pci_write_config32(dev, 0xA0, dtemp);
- dualPlaneOnly(dev);
- applyBoostFIDOffset(dev, nodeid);
- enableNbPState1(dev);
+ dualPlaneOnly(dev);
+ applyBoostFIDOffset(dev, nodeid);
+ enableNbPState1(dev);
finalPstateChange();
diff --git a/src/cpu/amd/family_10h-family_15h/tsc_freq.c b/src/cpu/amd/family_10h-family_15h/tsc_freq.c
index afd7dab69f..4aea1a02c9 100644
--- a/src/cpu/amd/family_10h-family_15h/tsc_freq.c
+++ b/src/cpu/amd/family_10h-family_15h/tsc_freq.c
@@ -24,11 +24,11 @@ unsigned long tsc_freq_mhz(void)
uint8_t cpudid;
/* On Family 10h/15h CPUs the TSC increments
- * at the P0 clock rate. Read the P0 clock
- * frequency from the P0 MSR and convert
- * to MHz. See also the Family 15h BKDG
- * Rev. 3.14 page 569.
- */
+ * at the P0 clock rate. Read the P0 clock
+ * frequency from the P0 MSR and convert
+ * to MHz. See also the Family 15h BKDG
+ * Rev. 3.14 page 569.
+ */
msr = rdmsr(0xc0010064);
cpufid = (msr.lo & 0x3f);
cpudid = (msr.lo & 0x1c0) >> 6;
diff --git a/src/cpu/amd/family_10h-family_15h/update_microcode.c b/src/cpu/amd/family_10h-family_15h/update_microcode.c
index 2d776909f6..a12091a0c5 100644
--- a/src/cpu/amd/family_10h-family_15h/update_microcode.c
+++ b/src/cpu/amd/family_10h-family_15h/update_microcode.c
@@ -18,8 +18,8 @@
#include <cpu/amd/microcode.h>
struct id_mapping {
- uint32_t orig_id;
- uint16_t new_id;
+ uint32_t orig_id;
+ uint16_t new_id;
};
static u16 get_equivalent_processor_rev_id(u32 orig_id) {
diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c
index 3d69dcba96..8f4bae2d96 100644
--- a/src/cpu/amd/model_fxx/model_fxx_init.c
+++ b/src/cpu/amd/model_fxx/model_fxx_init.c
@@ -44,9 +44,9 @@ void cpus_ready_for_init(void)
{
#if CONFIG_K8_REV_F_SUPPORT
#if CONFIG_MEM_TRAIN_SEQ == 1
- struct sys_info *sysinfox = (struct sys_info *)((CONFIG_RAMTOP) - sizeof(*sysinfox));
- // wait for ap memory to trained
- wait_all_core0_mem_trained(sysinfox);
+ struct sys_info *sysinfox = (struct sys_info *)((CONFIG_RAMTOP) - sizeof(*sysinfox));
+ // wait for ap memory to trained
+ wait_all_core0_mem_trained(sysinfox);
#endif
#endif
}
diff --git a/src/cpu/amd/model_fxx/model_fxx_update_microcode.c b/src/cpu/amd/model_fxx/model_fxx_update_microcode.c
index 592db86ed4..4b70e58f18 100644
--- a/src/cpu/amd/model_fxx/model_fxx_update_microcode.c
+++ b/src/cpu/amd/model_fxx/model_fxx_update_microcode.c
@@ -20,33 +20,33 @@
#include <cpu/amd/microcode.h>
struct id_mapping {
- uint32_t orig_id;
- uint16_t new_id;
+ uint32_t orig_id;
+ uint16_t new_id;
};
static u16 get_equivalent_processor_rev_id(u32 orig_id) {
static const struct id_mapping id_mapping_table[] = {
#if !CONFIG_K8_REV_F_SUPPORT
- { 0x0f48, 0x0048 },
- { 0x0f58, 0x0048 },
+ { 0x0f48, 0x0048 },
+ { 0x0f58, 0x0048 },
- { 0x0f4a, 0x004a },
- { 0x0f5a, 0x004a },
- { 0x0f7a, 0x004a },
- { 0x0f82, 0x004a },
- { 0x0fc0, 0x004a },
- { 0x0ff0, 0x004a },
+ { 0x0f4a, 0x004a },
+ { 0x0f5a, 0x004a },
+ { 0x0f7a, 0x004a },
+ { 0x0f82, 0x004a },
+ { 0x0fc0, 0x004a },
+ { 0x0ff0, 0x004a },
- { 0x10f50, 0x0150 },
- { 0x10f70, 0x0150 },
- { 0x10f80, 0x0150 },
- { 0x10fc0, 0x0150 },
- { 0x10ff0, 0x0150 },
+ { 0x10f50, 0x0150 },
+ { 0x10f70, 0x0150 },
+ { 0x10f80, 0x0150 },
+ { 0x10fc0, 0x0150 },
+ { 0x10ff0, 0x0150 },
- { 0x20f10, 0x0210 },
- { 0x20f12, 0x0210 },
- { 0x20f32, 0x0210 },
- { 0x20fb1, 0x0210 },
+ { 0x20f10, 0x0210 },
+ { 0x20f12, 0x0210 },
+ { 0x20f32, 0x0210 },
+ { 0x20fb1, 0x0210 },
#endif
#if CONFIG_K8_REV_F_SUPPORT
@@ -82,7 +82,7 @@ void update_microcode(uint32_t cpu_deviceid)
{
uint32_t equivalent_rev_id;
- /* Update the microcode */
+ /* Update the microcode */
equivalent_rev_id = get_equivalent_processor_rev_id(cpu_deviceid);
amd_update_microcode_from_cbfs(equivalent_rev_id);
}