aboutsummaryrefslogtreecommitdiff
path: root/src/cpu/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/cpu/amd')
-rw-r--r--src/cpu/amd/car/cache_as_ram.inc17
-rw-r--r--src/cpu/amd/family_10h-family_15h/defaults.h88
-rw-r--r--src/cpu/amd/family_10h-family_15h/fidvid.c81
-rw-r--r--src/cpu/amd/family_10h-family_15h/init_cpus.c66
-rw-r--r--src/cpu/amd/quadcore/quadcore.c19
-rw-r--r--src/cpu/amd/quadcore/quadcore_id.c1
6 files changed, 193 insertions, 79 deletions
diff --git a/src/cpu/amd/car/cache_as_ram.inc b/src/cpu/amd/car/cache_as_ram.inc
index cbb1e39854..53056038b7 100644
--- a/src/cpu/amd/car/cache_as_ram.inc
+++ b/src/cpu/amd/car/cache_as_ram.inc
@@ -548,8 +548,23 @@ CAR_FAM10_ap:
/* Fam10h NB config bit 54 was not set */
rolb %cl, %bl
roll_cfg:
+ jmp_if_not_fam15h(ap_apicid_ready)
+ cmp $0x5, %ecx
+ jne ap_apicid_ready
- /* Calculate stack pointer. */
+ /* This is a multi-node CPU
+ * Adjust the maximum APIC ID to a more reasonable value
+ * given that no 32-core Family 15h processors exist
+ */
+ movl %ebx, %ecx
+ and $0x0f, %ecx /* Get lower 4 bits of CPU number */
+ and $0x60, %ebx /* Get node ID */
+ shrl $0x1, %ebx /* Shift node ID part of APIC ID down by 1 */
+ or %ecx, %ebx /* Recombine node ID and CPU number */
+
+ap_apicid_ready:
+
+ /* Calculate stack pointer using adjusted APIC ID stored in ebx */
movl $CacheSizeAPStack, %eax
mull %ebx
movl $(CacheBase + (CacheSize - (CacheSizeBSPStack + CacheSizeBSPSlush))), %esp
diff --git a/src/cpu/amd/family_10h-family_15h/defaults.h b/src/cpu/amd/family_10h-family_15h/defaults.h
index 94468c5ae2..b6c9bc4c93 100644
--- a/src/cpu/amd/family_10h-family_15h/defaults.h
+++ b/src/cpu/amd/family_10h-family_15h/defaults.h
@@ -240,18 +240,37 @@ static const struct {
{ 0, 0x68, (AMD_DR_B0 | AMD_DR_B1),
AMD_PTYPE_SVR, 0x00200000, 0x00600000 }, /* [22:21] DsNpReqLmt0 = 01b */
- { 0, 0x84, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL,
+ { 0, 0x84, AMD_FAM10_ALL, AMD_PTYPE_ALL,
0x00002000, 0x00002000 }, /* [13] LdtStopTriEn = 1 */
- { 0, 0xA4, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL,
+ { 0, 0xA4, AMD_FAM10_ALL, AMD_PTYPE_ALL,
0x00002000, 0x00002000 }, /* [13] LdtStopTriEn = 1 */
- { 0, 0xC4, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL,
+ { 0, 0xC4, AMD_FAM10_ALL, AMD_PTYPE_ALL,
0x00002000, 0x00002000 }, /* [13] LdtStopTriEn = 1 */
- { 0, 0xE4, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL,
+ { 0, 0xE4, AMD_FAM10_ALL, AMD_PTYPE_ALL,
0x00002000, 0x00002000 }, /* [13] LdtStopTriEn = 1 */
+ /* FIXME
+ * Non-C32 packages only
+ */
+ { 0, 0x84, AMD_FAM15_ALL, AMD_PTYPE_ALL,
+ 0x00000000, 0x00002000 }, /* [13] LdtStopTriEn = 1 */
+
+ { 0, 0xA4, AMD_FAM15_ALL, AMD_PTYPE_ALL,
+ 0x00000000, 0x00002000 }, /* [13] LdtStopTriEn = 1 */
+
+ { 0, 0xC4, AMD_FAM15_ALL, AMD_PTYPE_ALL,
+ 0x00000000, 0x00002000 }, /* [13] LdtStopTriEn = 1 */
+
+ { 0, 0xE4, AMD_FAM15_ALL, AMD_PTYPE_ALL,
+ 0x00000000, 0x00002000 }, /* [13] LdtStopTriEn = 1 */
+
+ /* FIXME
+ * C32 package is not supported at this time
+ */
+
/* Link Global Retry Control Register */
{ 0, 0x150, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL,
0x00073900, 0x00073F00 },
@@ -610,38 +629,79 @@ static const struct {
{ 0x530A, AMD_DR_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_ALL,
0x00004400, 0x00006400 }, /* HT_PHY_DLL_REG */
- { 0xCF, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
+ { 0xCF, AMD_FAM10_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
+ 0x00000000, 0x000000FF }, /* Provide clear setting for logical
+ completeness */
+
+ { 0xDF, AMD_FAM10_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
+ 0x00000000, 0x000000FF }, /* Provide clear setting for logical
+ completeness */
+
+ { 0xCF, AMD_FAM10_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
+ 0x0000006D, 0x000000FF }, /* HT_PHY_HT1_FIFO_PTR_OPT_VALUE */
+
+ { 0xDF, AMD_FAM10_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
+ 0x0000006D, 0x000000FF }, /* HT_PHY_HT1_FIFO_PTR_OPT_VALUE */
+
+ /* Link Phy Receiver Loop Filter Registers */
+ { 0xD1, AMD_FAM10_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
+ 0x08040000, 0x3FFFC000 }, /* [29:22] LfcMax = 20h,
+ [21:14] LfcMin = 10h */
+
+ { 0xC1, AMD_FAM10_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
+ 0x08040000, 0x3FFFC000 }, /* [29:22] LfcMax = 20h,
+ [21:14] LfcMin = 10h */
+
+ { 0xD1, AMD_FAM10_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
+ 0x04020000, 0x3FFFC000 }, /* [29:22] LfcMax = 10h,
+ [21:14] LfcMin = 08h */
+
+ { 0xC1, AMD_FAM10_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
+ 0x04020000, 0x3FFFC000 }, /* [29:22] LfcMax = 10h,
+ [21:14] LfcMin = 08h */
+
+ { 0xC0, AMD_FAM10_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_ALL,
+ 0x40040000, 0xe01F0000 }, /* [31:29] RttCtl = 02h,
+ [20:16] RttIndex = 04h */
+
+/* FIXME
+ * Causes lockups for some reason when more than one package is installed
+ * Debug and reactivate!
+ */
+// #if 0
+ { 0xCF, AMD_FAM15_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
0x00000000, 0x000000FF }, /* Provide clear setting for logical
completeness */
- { 0xDF, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
+ { 0xDF, AMD_FAM15_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
0x00000000, 0x000000FF }, /* Provide clear setting for logical
completeness */
- { 0xCF, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
+ { 0xCF, AMD_FAM15_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
0x0000006D, 0x000000FF }, /* HT_PHY_HT1_FIFO_PTR_OPT_VALUE */
- { 0xDF, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
+ { 0xDF, AMD_FAM15_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
0x0000006D, 0x000000FF }, /* HT_PHY_HT1_FIFO_PTR_OPT_VALUE */
/* Link Phy Receiver Loop Filter Registers */
- { 0xD1, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
+ { 0xD1, AMD_FAM15_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
0x08040000, 0x3FFFC000 }, /* [29:22] LfcMax = 20h,
[21:14] LfcMin = 10h */
- { 0xC1, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
+ { 0xC1, AMD_FAM15_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT3,
0x08040000, 0x3FFFC000 }, /* [29:22] LfcMax = 20h,
[21:14] LfcMin = 10h */
- { 0xD1, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
+ { 0xD1, AMD_FAM15_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
0x04020000, 0x3FFFC000 }, /* [29:22] LfcMax = 10h,
[21:14] LfcMin = 08h */
- { 0xC1, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
+ { 0xC1, AMD_FAM15_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_HT1,
0x04020000, 0x3FFFC000 }, /* [29:22] LfcMax = 10h,
[21:14] LfcMin = 08h */
- { 0xC0, (AMD_FAM10_ALL | AMD_FAM15_ALL), AMD_PTYPE_ALL, HTPHY_LINKTYPE_ALL,
+ { 0xC0, AMD_FAM15_ALL, AMD_PTYPE_ALL, HTPHY_LINKTYPE_ALL,
0x40040000, 0xe01F0000 }, /* [31:29] RttCtl = 02h,
- [20:16] RttIndex = 04h */
+ [20:16] RttIndex = 04h */
+// #endif
};
diff --git a/src/cpu/amd/family_10h-family_15h/fidvid.c b/src/cpu/amd/family_10h-family_15h/fidvid.c
index 3af18bd06b..8a006cbbb3 100644
--- a/src/cpu/amd/family_10h-family_15h/fidvid.c
+++ b/src/cpu/amd/family_10h-family_15h/fidvid.c
@@ -629,44 +629,45 @@ static void prep_fid_change(void)
}
static void waitCurrentPstate(u32 target_pstate) {
- msr_t initial_msr = rdmsr(TSC_MSR);
- msr_t pstate_msr = rdmsr(CUR_PSTATE_MSR);
- msr_t tsc_msr;
- u8 timedout ;
-
- /* paranoia ? I fear when we run fixPsNbVidBeforeWR we can enter a
- * P1 that is a copy of P0, therefore has the same NB DID but the
- * TSC will count twice per tick, so we have to wait for twice the
- * count to achieve the desired timeout. But I'm likely to
- * misunderstand this...
- */
- u32 corrected_timeout = ( (pstate_msr.lo==1)
- && (!(rdmsr(0xC0010065).lo & NB_DID_M_ON)) ) ?
- WAIT_PSTATE_TIMEOUT*2 : WAIT_PSTATE_TIMEOUT ;
- msr_t timeout;
-
- timeout.lo = initial_msr.lo + corrected_timeout ;
- timeout.hi = initial_msr.hi;
- if ( (((u32)0xffffffff) - initial_msr.lo) < corrected_timeout ) {
- timeout.hi++;
- }
-
- // assuming TSC ticks at 1.25 ns per tick (800 MHz)
- do {
- pstate_msr = rdmsr(CUR_PSTATE_MSR);
- tsc_msr = rdmsr(TSC_MSR);
- timedout = (tsc_msr.hi > timeout.hi)
- || ((tsc_msr.hi == timeout.hi) && (tsc_msr.lo > timeout.lo ));
- } while ( (pstate_msr.lo != target_pstate) && (! timedout) ) ;
-
- if (pstate_msr.lo != target_pstate) {
- msr_t limit_msr = rdmsr(0xc0010061);
- printk(BIOS_ERR, "*** Time out waiting for P-state %01x. Current P-state %01x P-state current limit MSRC001_0061=%08x %08x\n", target_pstate, pstate_msr.lo, limit_msr.hi, limit_msr.lo);
-
- do { // should we just go on instead ?
- pstate_msr = rdmsr(CUR_PSTATE_MSR);
- } while ( pstate_msr.lo != target_pstate ) ;
- }
+ msr_t initial_msr = rdmsr(TSC_MSR);
+ msr_t pstate_msr = rdmsr(CUR_PSTATE_MSR);
+ msr_t tsc_msr;
+ u8 timedout ;
+
+ /* paranoia ? I fear when we run fixPsNbVidBeforeWR we can enter a
+ * P1 that is a copy of P0, therefore has the same NB DID but the
+ * TSC will count twice per tick, so we have to wait for twice the
+ * count to achieve the desired timeout. But I'm likely to
+ * misunderstand this...
+ */
+ u32 corrected_timeout = ((pstate_msr.lo==1)
+ && (!(rdmsr(0xC0010065).lo & NB_DID_M_ON)) ) ?
+ WAIT_PSTATE_TIMEOUT*2 : WAIT_PSTATE_TIMEOUT;
+ msr_t timeout;
+
+ timeout.lo = initial_msr.lo + corrected_timeout ;
+ timeout.hi = initial_msr.hi;
+ if ( (((u32)0xffffffff) - initial_msr.lo) < corrected_timeout ) {
+ timeout.hi++;
+ }
+
+ // assuming TSC ticks at 1.25 ns per tick (800 MHz)
+ do {
+ pstate_msr = rdmsr(CUR_PSTATE_MSR);
+ tsc_msr = rdmsr(TSC_MSR);
+ timedout = (tsc_msr.hi > timeout.hi)
+ || ((tsc_msr.hi == timeout.hi) && (tsc_msr.lo > timeout.lo ));
+ } while ( (pstate_msr.lo != target_pstate) && (! timedout) ) ;
+
+ if (pstate_msr.lo != target_pstate) {
+ msr_t limit_msr = rdmsr(0xc0010061);
+ printk(BIOS_ERR, "*** APIC ID %02x: timed out waiting for P-state %01x. Current P-state %01x P-state current limit MSRC001_0061=%08x %08x\n",
+ cpuid_ebx(0x00000001) >> 24, target_pstate, pstate_msr.lo, limit_msr.hi, limit_msr.lo);
+
+ do { // should we just go on instead ?
+ pstate_msr = rdmsr(CUR_PSTATE_MSR);
+ } while ( pstate_msr.lo != target_pstate ) ;
+ }
}
static void set_pstate(u32 nonBoostedPState) {
@@ -1060,13 +1061,13 @@ static int init_fidvid_bsp(u32 bsp_apicid, u32 nodes)
APs and BSP */
ap_apicidx.num = 0;
- for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE_RANGE, store_ap_apicid, &ap_apicidx);
+ for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE_RANGE, -1, store_ap_apicid, &ap_apicidx);
for (i = 0; i < ap_apicidx.num; i++) {
init_fidvid_bsp_stage1(ap_apicidx.apicid[i], &fv);
}
#else
- for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage1, &fv);
+ for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE0_ONLY, -1, init_fidvid_bsp_stage1, &fv);
#endif
print_debug_fv("common_fid = ", fv.common_fid);
diff --git a/src/cpu/amd/family_10h-family_15h/init_cpus.c b/src/cpu/amd/family_10h-family_15h/init_cpus.c
index e4721a43f3..a421bfcc03 100644
--- a/src/cpu/amd/family_10h-family_15h/init_cpus.c
+++ b/src/cpu/amd/family_10h-family_15h/init_cpus.c
@@ -55,6 +55,8 @@ static void set_EnableCf8ExtCfg(void)
static void set_EnableCf8ExtCfg(void) { }
#endif
+// #define DEBUG_HT_SETUP 1
+// #define FAM10_AP_NODE_SEQUENTIAL_START 1
typedef void (*process_ap_t) (u32 apicid, void *gp);
@@ -139,8 +141,8 @@ uint32_t get_boot_apic_id(uint8_t node, uint32_t core) {
//core range = 1 : core 0 only
//core range = 2 : cores other than core0
-static void for_each_ap(u32 bsp_apicid, u32 core_range, process_ap_t process_ap,
- void *gp)
+static void for_each_ap(uint32_t bsp_apicid, uint32_t core_range, int8_t node,
+ process_ap_t process_ap, void *gp)
{
// here assume the OS don't change our apicid
u32 ap_apicid;
@@ -161,6 +163,9 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range, process_ap_t process_ap,
}
for (i = 0; i < nodes; i++) {
+ if ((node >= 0) && (i != node))
+ continue;
+
cores_found = get_core_num_in_bsp(i);
u32 jstart, jend;
@@ -276,7 +281,7 @@ void wait_all_other_cores_started(u32 bsp_apicid)
{
// all aps other than core0
printk(BIOS_DEBUG, "started ap apicid: ");
- for_each_ap(bsp_apicid, 2, wait_ap_started, (void *)0);
+ for_each_ap(bsp_apicid, 2, -1, wait_ap_started, (void *)0);
printk(BIOS_DEBUG, "\n");
}
@@ -369,8 +374,10 @@ static u32 init_cpus(u32 cpu_init_detectedx, struct sys_info *sysinfo)
/* NB_CFG MSR is shared between cores, so we need make sure
core0 is done at first --- use wait_all_core0_started */
if (id.coreid == 0) {
- set_apicid_cpuid_lo(); /* only set it on core0 */
- set_EnableCf8ExtCfg(); /* only set it on core0 */
+ /* Set InitApicIdCpuIdLo / EnableCf8ExtCfg on core0 only */
+ if (!is_fam15h())
+ set_apicid_cpuid_lo();
+ set_EnableCf8ExtCfg();
#if CONFIG_ENABLE_APIC_EXT_ID
enable_apic_ext_id(id.nodeid);
#endif
@@ -423,6 +430,7 @@ static u32 init_cpus(u32 cpu_init_detectedx, struct sys_info *sysinfo)
}
// Mark the core as started.
lapic_write(LAPIC_MSG_REG, (apicid << 24) | F10_APSTATE_STARTED);
+ printk(BIOS_DEBUG, "CPU APICID %02x start flag set\n", apicid);
if (apicid != bsp_apicid) {
/* Setup each AP's cores MSRs.
@@ -584,6 +592,34 @@ static void setup_remote_node(u8 node)
}
#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */
+//it is running on core0 of node0
+static void start_other_cores(uint32_t bsp_apicid)
+{
+ u32 nodes;
+ u32 nodeid;
+
+ // disable multi_core
+ if (read_option(multi_core, 0) != 0) {
+ printk(BIOS_DEBUG, "Skip additional core init\n");
+ return;
+ }
+
+ nodes = get_nodes();
+
+ for (nodeid = 0; nodeid < nodes; nodeid++) {
+ u32 cores = get_core_num_in_bsp(nodeid);
+ printk(BIOS_DEBUG, "init node: %02x cores: %02x pass 1\n", nodeid, cores);
+ if (cores > 0) {
+ real_start_other_core(nodeid, cores);
+#ifdef FAM10_AP_NODE_SEQUENTIAL_START
+ printk(BIOS_DEBUG, "waiting for core start on node %d...\n", nodeid);
+ for_each_ap(bsp_apicid, 2, nodeid, wait_ap_started, (void *)0);
+ printk(BIOS_DEBUG, "...started\n");
+#endif
+ }
+ }
+}
+
static void AMD_Errata281(u8 node, uint64_t revision, u32 platform)
{
/* Workaround for Transaction Scheduling Conflict in
@@ -843,6 +879,10 @@ static void AMD_SetHtPhyRegister(u8 node, u8 link, u8 entry)
phyBase = ((u32) link << 3) | 0x180;
+ /* Determine if link is connected and abort if not */
+ if (!(pci_read_config32(NODE_PCI(node, 0), 0x98 + (link * 0x20)) & 0x1))
+ return;
+
/* Get the portal control register's initial value
* and update it to access the desired phy register
*/
@@ -1005,10 +1045,11 @@ static void cpuSetAMDPCI(u8 node)
* Hypertransport initialization has taken place. Also note
* that it is run for the first core on each node
*/
- u8 i, j;
+ uint8_t i;
+ uint8_t j;
u32 platform;
u32 val;
- u8 offset;
+ uint8_t offset;
uint32_t dword;
uint64_t revision;
@@ -1035,6 +1076,17 @@ static void cpuSetAMDPCI(u8 node)
}
}
+#ifdef DEBUG_HT_SETUP
+ /* Dump link settings */
+ for (i = 0; i < 4; i++) {
+ for (j = 0; j < 4; j++) {
+ printk(BIOS_DEBUG, "Node %d link %d: type register: %08x control register: %08x extended control sublink 0: %08x 1: %08x\n", i, j,
+ pci_read_config32(NODE_PCI(i, 0), 0x98 + (j * 0x20)), pci_read_config32(NODE_PCI(i, 0), 0x84 + (j * 0x20)),
+ pci_read_config32(NODE_PCI(i, 0), 0x170 + (j * 0x4)), pci_read_config32(NODE_PCI(i, 0), 0x180 + (j * 0x4)));
+ }
+ }
+#endif
+
for (i = 0; i < ARRAY_SIZE(fam10_htphy_default); i++) {
if ((fam10_htphy_default[i].revision & revision) &&
(fam10_htphy_default[i].platform & platform)) {
diff --git a/src/cpu/amd/quadcore/quadcore.c b/src/cpu/amd/quadcore/quadcore.c
index 0f7c728105..3ca7f3e0e7 100644
--- a/src/cpu/amd/quadcore/quadcore.c
+++ b/src/cpu/amd/quadcore/quadcore.c
@@ -27,21 +27,6 @@
uint32_t get_boot_apic_id(uint8_t node, uint32_t core);
uint32_t wait_cpu_state(uint32_t apicid, uint32_t state, uint32_t state2);
-static inline uint8_t is_fam15h(void)
-{
- uint8_t fam15h = 0;
- uint32_t family;
-
- family = cpuid_eax(0x80000001);
- family = ((family & 0xf00000) >> 16) | ((family & 0xf00) >> 8);
-
- if (family >= 0x6f)
- /* Family 15h or later */
- fam15h = 1;
-
- return fam15h;
-}
-
static u32 get_core_num_in_bsp(u32 nodeid)
{
u32 dword;
@@ -137,6 +122,7 @@ static void real_start_other_core(uint32_t nodeid, uint32_t cores)
}
}
+#if (!IS_ENABLED(CONFIG_CPU_AMD_MODEL_10XXX))
//it is running on core0 of node0
static void start_other_cores(void)
{
@@ -153,9 +139,10 @@ static void start_other_cores(void)
for (nodeid = 0; nodeid < nodes; nodeid++) {
u32 cores = get_core_num_in_bsp(nodeid);
- printk(BIOS_DEBUG, "init node: %02x cores: %02x pass 1 \n", nodeid, cores);
+ printk(BIOS_DEBUG, "init node: %02x cores: %02x pass 1\n", nodeid, cores);
if (cores > 0) {
real_start_other_core(nodeid, cores);
}
}
}
+#endif
diff --git a/src/cpu/amd/quadcore/quadcore_id.c b/src/cpu/amd/quadcore/quadcore_id.c
index acfdb4967a..99e6d68be4 100644
--- a/src/cpu/amd/quadcore/quadcore_id.c
+++ b/src/cpu/amd/quadcore/quadcore_id.c
@@ -104,7 +104,6 @@ struct node_core_id get_node_core_id(u32 nb_cfg_54)
id.nodeid = apicid & 0x7;
}
}
-
if (fam15h && dual_node) {
/* Coreboot expects each separate processor die to be on a different nodeid.
* Since the code above returns nodeid 0 even on internal node 1 some fixup is needed...
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-08 20:39:56 +0000