diff options
Diffstat (limited to 'src/cpu/amd/model_10xxx')
-rw-r--r-- | src/cpu/amd/model_10xxx/defaults.h | 2 | ||||
-rw-r--r-- | src/cpu/amd/model_10xxx/fidvid.c | 6 | ||||
-rw-r--r-- | src/cpu/amd/model_10xxx/init_cpus.c | 2 |
3 files changed, 5 insertions, 5 deletions
diff --git a/src/cpu/amd/model_10xxx/defaults.h b/src/cpu/amd/model_10xxx/defaults.h index f7b8b2f9e1..3d33dda029 100644 --- a/src/cpu/amd/model_10xxx/defaults.h +++ b/src/cpu/amd/model_10xxx/defaults.h @@ -54,7 +54,7 @@ static const struct { { DC_CFG, AMD_DR_Bx, AMD_PTYPE_SVR, 0x00000000, 0x00000000, - 0x00000000, 0x00000C00 }, /* Errata 326 */ + 0x00000000, 0x00000C00 }, /* Erratum 326 */ { NB_CFG, AMD_FAM10_ALL, AMD_PTYPE_DC | AMD_PTYPE_MC, 0x00000000, 1 << 22, diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index ebe44dd76a..4297c90460 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -68,7 +68,7 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010 9.- TODO Requires information on current delivery capability (depends on mainboard and maybe power supply ?). One might use a config - option with the maximum number of Ampers that the board can deliver to CPU. + option with the maximum number of Amperes that the board can deliver to CPU. 10.- [Multiprocessor] TODO 2.4.2.12 [Uniprocessor] FIXME ? We call setPStateMaxVal() in init_fidvid_stage2, @@ -79,7 +79,7 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010 11.- finalPstateChange() from init_fidvid_Stage2 (BKDG says just "may", anyway) 12.- generate ACPI for p-states. FIXME - Needs more assesment. There's some kind of fixed support that + Needs more assessment. There's some kind of fixed support that does not seem to depend on CPU revision or actual MSRC001_00[68:64] as BKDG apparently requires. http://www.coreboot.org/ACPI#CPU_Power_Management @@ -935,7 +935,7 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode) static void finalPstateChange(void) { - /* Enble P0 on all cores for best performance. + /* Enable P0 on all cores for best performance. * Linux can slow them down later if need be. * It is safe since they will be in C1 halt * most of the time anyway. diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c index 3d5ddcfb35..eb047b8db2 100644 --- a/src/cpu/amd/model_10xxx/init_cpus.c +++ b/src/cpu/amd/model_10xxx/init_cpus.c @@ -424,7 +424,7 @@ static void start_node(u8 node) /** * static void setup_remote_node(u32 node) * - * Copy the BSP Adress Map to each AP. + * Copy the BSP Address Map to each AP. */ static void setup_remote_node(u8 node) { |