1 files changed, 98 insertions, 0 deletions
diff --git a/src/cpu/allwinner/a10/uart.c b/src/cpu/allwinner/a10/uart.c
new file mode 100644
index 0000000000..dc98bffbdf
--- /dev/null
+++ b/src/cpu/allwinner/a10/uart.c
@@ -0,0 +1,98 @@
+/*
+ * Uart setup helpers for Allwinner SoCs
+ *
+ * Copyright (C) 2013  Alexandru Gagniuc <mr.nuke.me@gmail.com>
+ * Subject to the GNU GPL v2, or (at your option) any later version.
+ */
+
+#include "uart.h"
+#include <arch/io.h>
+
+/* Give me my 8250 UART definitions!!!! */
+/* TODO: Clean this up when uart8250mem works on ARM */
+#undef CONFIG_CONSOLE_SERIAL8250MEM
+#define CONFIG_CONSOLE_SERIAL8250MEM 1
+#include <uart8250.h>
+
+/**
+ * \brief Configure line control settings for UART
+ */
+void a10_uart_configure(void *uart_base, u32 baud_rate, u8 data_bits,
+			enum uart_parity parity, u8 stop_bits)
+{
+	u32 reg32;
+	u16 div;
+	struct a10_uart *uart = uart_base;
+
+	/* Enable access to Divisor Latch register */
+	write32(UART_LCR_DLAB, &uart->lcr);
+	/* Set baudrate */
+	/* FIXME: We assume clock is 24MHz, which may not be the case */
+	div = 24000000 / 16 / baud_rate;
+	write32((div >> 8) & 0xff, &uart->dlh);
+	write32(div & 0xff, &uart->dll);
+	/* Set line control */
+	reg32 = (data_bits - 5) & UART_LCR_WLS_MSK;
+	switch (parity) {
+	case UART_PARITY_ODD:
+		reg32 |= UART_LCR_PEN;
+		break;
+	case UART_PARITY_EVEN:
+		reg32 |= UART_LCR_PEN;
+		reg32 |= UART_LCR_EPS;
+		break;
+	case UART_PARITY_NONE:	/* Fall through */
+	default:
+		break;
+	}
+	write32(reg32, &uart->lcr);
+}
+
+void a10_uart_enable_fifos(void *uart_base)
+{
+	struct a10_uart *uart = uart_base;
+
+	write32(UART_FCR_FIFO_EN, &uart->fcr);
+}
+
+static int tx_fifo_full(struct a10_uart *uart)
+{
+	/* This may be a misnomer, or a typo in the datasheet. THRE indicates
+	 * that the TX register is empty, not that the FIFO is not full, but
+	 * this may be due to a datasheet typo. Keep the current name to signal
+	 * intent. */
+	return !(read32(&uart->lsr) & UART_LSR_THRE);
+}
+
+static int rx_fifo_empty(struct a10_uart *uart)
+{
+	return !(read32(&uart->lsr) & UART_LSR_DR);
+}
+
+/**
+ * \brief Read a single byte from the UART.
+ *
+ * Blocks until at least a byte is available.
+ */
+u8 a10_uart_rx_blocking(void *uart_base)
+{
+	struct a10_uart *uart = uart_base;
+
+	while (rx_fifo_empty(uart)) ;
+
+	return read32(&uart->rbr);
+}
+
+/**
+ * \brief Write a single byte to the UART.
+ *
+ * Blocks until there is space in the FIFO.
+ */
+void a10_uart_tx_blocking(void *uart_base, u8 data)
+{
+	struct a10_uart *uart = uart_base;
+
+	while (tx_fifo_full(uart)) ;
+
+	return write32(data, &uart->thr);
+}