diff options
Diffstat (limited to 'Documentation/mainboard/msi/ms7707/ms7707.md')
| -rw-r--r-- | Documentation/mainboard/msi/ms7707/ms7707.md | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/Documentation/mainboard/msi/ms7707/ms7707.md b/Documentation/mainboard/msi/ms7707/ms7707.md index 83b860c532..9309596b64 100644 --- a/Documentation/mainboard/msi/ms7707/ms7707.md +++ b/Documentation/mainboard/msi/ms7707/ms7707.md @@ -74,7 +74,7 @@ seconds. Setting the jumper alone is not enough (the Fintek is VBAT backed). Put all back in place and restart the board. It might need 1-2 AC power cycles to reinitialize (running at full fan speed - don't panic). * External flashing has been tested with RPi2 without main power connected. -3.3V provided by RPi2. Read more about flashing methods [here](https://doc.coreboot.org/flash_tutorial/index.html). +3.3V provided by RPi2. Read more about [flashing methods]. * In case of going back to proprietary BIOS create/save CMOS settings as early as possible (do not leave BIOS on first start without saving settings). The BIOS might corrupt nvram (not cmos!) and leave the system in a dead state @@ -110,3 +110,4 @@ needed (internally re-routed already). [Winbond 25Q32BV datasheet]: https://www.winbond.com/resource-files/w25q32bv_revi_100413_wo_automotive.pdf [Fintek F71808A datasheet]: https://www.alldatasheet.com/datasheet-pdf/pdf/459069/FINTEK/F71808A.html [flashlayout]: flashlayout.svg +[flashing methods]: ../../../flash_tutorial/index.md |