diff options
-rw-r--r-- | src/ec/google/chromeec/acpi/ec.asl | 20 | ||||
-rw-r--r-- | src/ec/google/chromeec/ec_commands.h | 67 |
2 files changed, 86 insertions, 1 deletions
diff --git a/src/ec/google/chromeec/acpi/ec.asl b/src/ec/google/chromeec/acpi/ec.asl index 1d698a1f1e..5218c88c40 100644 --- a/src/ec/google/chromeec/acpi/ec.asl +++ b/src/ec/google/chromeec/acpi/ec.asl @@ -52,6 +52,7 @@ Device (EC0) PATI, 8, // Programmable Auxiliary Trip Sensor ID PATT, 8, // Programmable Auxiliary Trip Threshold PATC, 8, // Programmable Auxiliary Trip Commit + CHGL, 8, // Charger Current Limit } OperationRegion (EMEM, SystemIO, EC_LPC_ADDR_MEMMAP, EC_MEMMAP_SIZE) @@ -380,7 +381,7 @@ Device (EC0) /* * Thermal Threshold Event - */ + */ Method (_Q09, 0, NotSerialized) { If (Acquire (^PATM, 1000)) { @@ -404,6 +405,23 @@ Device (EC0) Release (^PATM) } + /* + * Set Charger Current Limit + * Arg0 = Current Limit in 64mA steps + */ + Method (CHGS, 1, Serialized) + { + Store (ToInteger (Arg0), ^CHGL) + } + + /* + * Disable Charger Current Limit + */ + Method (CHGD, 0, Serialized) + { + Store (0xFF, ^CHGL) + } + #include "ac.asl" #include "battery.asl" } diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h index afb8925b2e..bf7aa6b3b1 100644 --- a/src/ec/google/chromeec/ec_commands.h +++ b/src/ec/google/chromeec/ec_commands.h @@ -249,6 +249,11 @@ enum host_event_code { /* Suggest that the AP resume normal speed */ EC_HOST_EVENT_THROTTLE_STOP = 19, + /* Hang detect logic detected a hang and host event timeout expired */ + EC_HOST_EVENT_HANG_DETECT = 20, + /* Hang detect logic detected a hang and warm rebooted the AP */ + EC_HOST_EVENT_HANG_REBOOT = 21, + /* * The high bit of the event mask is not used as a host event code. If * it reads back as set, then the entire event mask should be @@ -1707,6 +1712,60 @@ struct ec_response_i2c_passthru { uint8_t data[]; /* Data read by messages concatenated here */ } __packed; +/*****************************************************************************/ +/* Power button hang detect */ + +#define EC_CMD_HANG_DETECT 0x9f + +/* Reasons to start hang detection timer */ +/* Power button pressed */ +#define EC_HANG_START_ON_POWER_PRESS (1 << 0) + +/* Lid closed */ +#define EC_HANG_START_ON_LID_CLOSE (1 << 1) + + /* Lid opened */ +#define EC_HANG_START_ON_LID_OPEN (1 << 2) + +/* Start of AP S3->S0 transition (booting or resuming from suspend) */ +#define EC_HANG_START_ON_RESUME (1 << 3) + +/* Reasons to cancel hang detection */ + +/* Power button released */ +#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8) + +/* Any host command from AP received */ +#define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9) + +/* Stop on end of AP S0->S3 transition (suspending or shutting down) */ +#define EC_HANG_STOP_ON_SUSPEND (1 << 10) + +/* + * If this flag is set, all the other fields are ignored, and the hang detect + * timer is started. This provides the AP a way to start the hang timer + * without reconfiguring any of the other hang detect settings. Note that + * you must previously have configured the timeouts. + */ +#define EC_HANG_START_NOW (1 << 30) + +/* + * If this flag is set, all the other fields are ignored (including + * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer + * without reconfiguring any of the other hang detect settings. + */ +#define EC_HANG_STOP_NOW (1 << 31) + +struct ec_params_hang_detect { + /* Flags; see EC_HANG_* */ + uint32_t flags; + + /* Timeout in msec before generating host event, if enabled */ + uint16_t host_event_timeout_msec; + + /* Timeout in msec before generating warm reboot, if enabled */ + uint16_t warm_reboot_timeout_msec; +} __packed; /*****************************************************************************/ /* Debug commands for battery charging */ @@ -1912,6 +1971,14 @@ struct ec_params_reboot_ec { * write 0x1 to [0x07] -- disable threshold 1 */ +/* DPTF battery charging current limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT 0x08 + +/* Charging limit is specified in 64 mA steps */ +#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64 +/* Value to disable DPTF battery charging limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff + /* Current version of ACPI memory address space */ #define EC_ACPI_MEM_VERSION_CURRENT 1 |