diff options
| -rw-r--r-- | src/superio/fintek/f71869ad/f71869ad_hwm.c | 4 | ||||
| -rw-r--r-- | src/superio/fintek/f71869ad/f71869ad_multifunc.c | 8 | ||||
| -rw-r--r-- | src/superio/smsc/lpc47n207/early_serial.c | 6 | ||||
| -rw-r--r-- | src/superio/smsc/smscsuperio/superio.c | 4 |
4 files changed, 11 insertions, 11 deletions
diff --git a/src/superio/fintek/f71869ad/f71869ad_hwm.c b/src/superio/fintek/f71869ad/f71869ad_hwm.c index e22bb5fde9..d253e5f6e6 100644 --- a/src/superio/fintek/f71869ad/f71869ad_hwm.c +++ b/src/superio/fintek/f71869ad/f71869ad_hwm.c @@ -82,11 +82,11 @@ void f71869ad_hwm_init(struct device *dev) pnp_write_index(port, HWM_FAN1_TEMP_MAP_SEL, conf->hwm_fan1_temp_map_sel); /* set FAN_PROG_SEL = 1 */ pnp_write_index(port, HWM_FAN_FAULT_TIME_REG, 0x8a); - /* FAN1_BASE_TEMP (Tb) set when FAN_PROG_SEL=1, p.64-65 */ + /* FAN1_BASE_TEMP (Tb) set when FAN_PROG_SEL = 1, p.64-65 */ pnp_write_index(port, HWM_FAN_TYPE_SEL_REG, conf->hwm_fan_type_sel_reg); /* set TFAN1_ADJ_SEL (Ta) p.67 to use CR7Ah p.61 */ pnp_write_index(port, HWM_FAN_MODE_SEL_REG, conf->hwm_fan_mode_sel_reg); - /* TFAN1_ADJ_{UP,DOWN}_RATE (Ct=1/4 up & down) in 0x95 when FAN_PROG_SEL = + /* TFAN1_ADJ_{UP,DOWN}_RATE (Ct = 1/4 up & down) in 0x95 when FAN_PROG_SEL = 1, p.88 */ pnp_write_index(port, HWM_FAN1_TEMP_ADJ_RATE_REG, conf->hwm_fan1_temp_adj_rate_reg); /* set FAN_PROG_SEL = 0 */ diff --git a/src/superio/fintek/f71869ad/f71869ad_multifunc.c b/src/superio/fintek/f71869ad/f71869ad_multifunc.c index bb850ad9ec..1d0b98a546 100644 --- a/src/superio/fintek/f71869ad/f71869ad_multifunc.c +++ b/src/superio/fintek/f71869ad/f71869ad_multifunc.c @@ -36,19 +36,19 @@ void f71869ad_multifunc_init(struct device *dev) pnp_write_config(dev, MULTI_FUNC_SEL_REG1, conf->multi_function_register_1); - /* multi-func select reg2 (CLK_TUNE_EN=0) */ + /* multi-func select reg2 (CLK_TUNE_EN = 0) */ pnp_write_config(dev, MULTI_FUNC_SEL_REG2, conf->multi_function_register_2); - /* multi-func select reg3 (CLK_TUNE_EN=0) */ + /* multi-func select reg3 (CLK_TUNE_EN = 0) */ pnp_write_config(dev, MULTI_FUNC_SEL_REG3, conf->multi_function_register_3); - /* multi-func select reg4 (CLK_TUNE_EN=0) */ + /* multi-func select reg4 (CLK_TUNE_EN = 0) */ pnp_write_config(dev, MULTI_FUNC_SEL_REG4, conf->multi_function_register_4); - /* multi-func select reg5 (CLK_TUNE_EN=0) */ + /* multi-func select reg5 (CLK_TUNE_EN = 0) */ pnp_write_config(dev, MULTI_FUNC_SEL_REG5, conf->multi_function_register_5); diff --git a/src/superio/smsc/lpc47n207/early_serial.c b/src/superio/smsc/lpc47n207/early_serial.c index 175ea83d21..b8d3960654 100644 --- a/src/superio/smsc/lpc47n207/early_serial.c +++ b/src/superio/smsc/lpc47n207/early_serial.c @@ -57,7 +57,7 @@ void try_enabling_LPC47N207_uart(void) /* enable CONFIG mode */ outb(CONFIG_ENABLE, lpc_port); - reg_value=inb(lpc_port); + reg_value = inb(lpc_port); if (reg_value != CONFIG_ENABLE) { continue; /* There is no LPC device at this address */ } @@ -68,12 +68,12 @@ void try_enabling_LPC47N207_uart(void) * match. */ outb(0x12, lpc_port); - reg_value=inb(lpc_port + 1); + reg_value = inb(lpc_port + 1); if (reg_value != (lpc_port & 0xff)) break; outb(0x13, lpc_port); - reg_value=inb(lpc_port + 1); + reg_value = inb(lpc_port + 1); if (reg_value != (lpc_port >> 8)) break; diff --git a/src/superio/smsc/smscsuperio/superio.c b/src/superio/smsc/smscsuperio/superio.c index 69eceb1b18..6cd3382648 100644 --- a/src/superio/smsc/smscsuperio/superio.c +++ b/src/superio/smsc/smscsuperio/superio.c @@ -236,8 +236,8 @@ static void enable_dev(struct device *dev) /* TODO: Error handling? */ - printk(BIOS_INFO, "Found SMSC Super I/O (ID=0x%02x, " - "rev=0x%02x)\n", superio_id, superio_rev); + printk(BIOS_INFO, "Found SMSC Super I/O (ID = 0x%02x, " + "rev = 0x%02x)\n", superio_id, superio_rev); first_time = 0; if (superio_id == LPC47M172) { |