diff options
| -rw-r--r-- | src/mainboard/intel/mtlrvp/Kconfig | 1 | ||||
| -rw-r--r-- | src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb | 118 |
2 files changed, 117 insertions, 2 deletions
diff --git a/src/mainboard/intel/mtlrvp/Kconfig b/src/mainboard/intel/mtlrvp/Kconfig index a095802b63..916edd4b10 100644 --- a/src/mainboard/intel/mtlrvp/Kconfig +++ b/src/mainboard/intel/mtlrvp/Kconfig @@ -4,6 +4,7 @@ config BOARD_INTEL_MTLRVP_COMMON select DRIVERS_I2C_GENERIC select DRIVERS_I2C_HID select DRIVERS_I2C_MAX98373 + select DRIVERS_INTEL_MIPI_CAMERA select DRIVERS_INTEL_SOUNDWIRE select DRIVERS_GENERIC_MAX98357A select DRIVERS_SOUNDWIRE_ALC711 diff --git a/src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb b/src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb index 3202a92963..939a441091 100644 --- a/src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb +++ b/src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb @@ -108,6 +108,20 @@ chip soc/intel/meteorlake device domain 0 on device ref igpu on end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + register "cio2_num_ports" = "2" + register "cio2_lanes_used" = "{4,4}" + register "cio2_lane_endpoint[0]" = ""^I2C1.CAM0"" + register "cio2_lane_endpoint[1]" = ""^I2C0.CAM1"" + register "cio2_prt[0]" = "0" + register "cio2_prt[1]" = "4" + device generic 0 on end + end + end device ref dtt on chip drivers/intel/dptf ## sensor information @@ -387,8 +401,108 @@ chip soc/intel/meteorlake device generic 0 on end end end - device ref i2c0 on end - device ref i2c1 on end + device ref i2c0 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTIDB10"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""Ov 13b10 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "4" + register "num_freq_entries" = "1" + register "link_freq[0]" = "560000000" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "0" + register "clk_panel.clks[0].freq" = "1" #19.2 Mhz + register "gpio_panel.gpio[0].gpio_num" = "GPP_A17" #power_enable + register "gpio_panel.gpio[1].gpio_num" = "GPP_H00" #reset + + #_ON + register "on_seq.ops_cnt" = "4" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)" + + #_OFF + register "off_seq.ops_cnt" = "3" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on end + end + end + device ref i2c1 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTIDB10"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 13b10 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM1"" + + register "ssdb.lanes_used" = "4" + register "num_freq_entries" = "1" + register "link_freq[0]" = "560000000" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "2" + register "clk_panel.clks[0].freq" = "1" #19.2 Mhz + register "gpio_panel.gpio[0].gpio_num" = "GPP_C08" #power_enable + register "gpio_panel.gpio[1].gpio_num" = "GPP_V23" #reset + + #_ON + register "on_seq.ops_cnt" = "4" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)" + + #_OFF + register "off_seq.ops_cnt" = "3" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "3" + register "acpi_name" = ""VCM1"" + register "chip_name" = ""DW AF VCM"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\\_SB.PCI0.I2C1.CAM0.PRIC"" + register "vcm_compat" = ""dongwoon,dw9714"" + + device i2c 0C on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM1"" + register "chip_name" = ""BRCA016GWZ"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "pr0" = ""\\_SB.PCI0.I2C1.CAM0.PRIC"" + register "nvm_compat" = ""atmel,24c16"" + + register "nvm_size" = "0x800" + register "nvm_pagesize" = "0x01" + register "nvm_readonly" = "0x01" + register "nvm_width" = "0x08" + + device i2c 50 on end + end + end device ref i2c2 on end device ref i2c3 on chip drivers/i2c/generic |