diff options
| -rw-r--r-- | src/mainboard/google/auron/Kconfig | 4 | ||||
| -rw-r--r-- | src/mainboard/google/auron/devicetree.cb (renamed from src/mainboard/google/auron/variants/auron_paine/devicetree.cb) | 38 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/auron_paine/overridetree.cb | 16 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/auron_yuna/devicetree.cb | 103 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/auron_yuna/overridetree.cb | 16 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/buddy/devicetree.cb | 110 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/buddy/overridetree.cb | 39 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/gandof/devicetree.cb | 103 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/gandof/overridetree.cb | 16 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/lulu/devicetree.cb | 104 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/lulu/overridetree.cb | 16 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/samus/devicetree.cb | 107 | ||||
| -rw-r--r-- | src/mainboard/google/auron/variants/samus/overridetree.cb | 40 |
13 files changed, 158 insertions, 554 deletions
diff --git a/src/mainboard/google/auron/Kconfig b/src/mainboard/google/auron/Kconfig index 644104a37e..20d2e440c2 100644 --- a/src/mainboard/google/auron/Kconfig +++ b/src/mainboard/google/auron/Kconfig @@ -48,9 +48,9 @@ config MAINBOARD_PART_NUMBER default "Lulu" if BOARD_GOOGLE_LULU default "Samus" if BOARD_GOOGLE_SAMUS -config DEVICETREE +config OVERRIDE_DEVICETREE string - default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb" + default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" config EC_GOOGLE_CHROMEEC_BOARDNAME string diff --git a/src/mainboard/google/auron/variants/auron_paine/devicetree.cb b/src/mainboard/google/auron/devicetree.cb index f6ec15a617..cabcdf0c4b 100644 --- a/src/mainboard/google/auron/variants/auron_paine/devicetree.cb +++ b/src/mainboard/google/auron/devicetree.cb @@ -12,14 +12,6 @@ chip soc/intel/broadwell # Set backlight PWM value for eDP register "gpu_pch_backlight_pwm_hz" = "200" - # Enable Panel and configure power delays - register "gpu_panel_port_select" = "1" # eDP - register "gpu_panel_power_cycle_delay" = "5" # 400ms - register "gpu_panel_power_up_delay" = "400" # 40ms - register "gpu_panel_power_down_delay" = "150" # 15ms - register "gpu_panel_power_backlight_on_delay" = "70" # 7ms - register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms - register "pirqa_routing" = "0x8b" register "pirqb_routing" = "0x8a" register "pirqc_routing" = "0x8b" @@ -44,10 +36,6 @@ chip soc/intel/broadwell register "sata_port_map" = "0x1" register "sio_acpi_mode" = "1" - # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x5" - register "sata_port1_gen3_dtle" = "0x5" - # Force enable ASPM for PCIe Port1 register "pcie_port_force_aspm" = "0x01" @@ -61,32 +49,32 @@ chip soc/intel/broadwell end device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - device pci 03.0 on end # mini-hd audio + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + device pci 03.0 on end # mini-hd audio device pci 13.0 off end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 on end # Serial I/O DMA - device pci 15.1 on end # I2C0 - device pci 15.2 on end # I2C1 + device pci 14.0 on end # USB3 XHCI + device pci 15.0 on end # Serial I/O DMA + device pci 15.1 on end # I2C0 + device pci 15.2 on end # I2C1 device pci 15.3 off end # GSPI0 device pci 15.4 off end # GSPI1 device pci 15.5 off end # UART0 device pci 15.6 off end # UART1 - device pci 16.0 on end # Management Engine Interface 1 + device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT device pci 17.0 off end # SDIO device pci 19.0 off end # GbE - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 device pci 1c.1 off end # PCIe Port #2 device pci 1c.2 off end # PCIe Port #3 device pci 1c.3 off end # PCIe Port #4 device pci 1c.4 off end # PCIe Port #5 device pci 1c.5 off end # PCIe Port #6 - device pci 1d.0 on end # USB2 EHCI + device pci 1d.0 on end # USB2 EHCI device pci 1e.0 off end # PCI bridge device pci 1f.0 on chip drivers/pc80/tpm @@ -96,8 +84,8 @@ chip soc/intel/broadwell device pnp 0c09.0 on end end end # LPC bridge - device pci 1f.2 on end # SATA Controller + device pci 1f.2 on end # SATA Controller device pci 1f.3 off end # SMBus - device pci 1f.6 on end # Thermal + device pci 1f.6 on end # Thermal end end diff --git a/src/mainboard/google/auron/variants/auron_paine/overridetree.cb b/src/mainboard/google/auron/variants/auron_paine/overridetree.cb new file mode 100644 index 0000000000..70b1ebd552 --- /dev/null +++ b/src/mainboard/google/auron/variants/auron_paine/overridetree.cb @@ -0,0 +1,16 @@ +chip soc/intel/broadwell + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "5" # 400ms + register "gpu_panel_power_up_delay" = "400" # 40ms + register "gpu_panel_power_down_delay" = "150" # 15ms + register "gpu_panel_power_backlight_on_delay" = "70" # 7ms + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" + + device domain 0 on end +end diff --git a/src/mainboard/google/auron/variants/auron_yuna/devicetree.cb b/src/mainboard/google/auron/variants/auron_yuna/devicetree.cb deleted file mode 100644 index db02565b27..0000000000 --- a/src/mainboard/google/auron/variants/auron_yuna/devicetree.cb +++ /dev/null @@ -1,103 +0,0 @@ -chip soc/intel/broadwell - - # Enable eDP Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Disable DisplayPort C Hotplug - register "gpu_dp_c_hotplug" = "0x00" - - # Enable HDMI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - # Set backlight PWM value for eDP - register "gpu_pch_backlight_pwm_hz" = "200" - - # Enable Panel and configure power delays - register "gpu_panel_port_select" = "1" # eDP - register "gpu_panel_power_cycle_delay" = "5" # 400ms - register "gpu_panel_power_up_delay" = "400" # 40ms - register "gpu_panel_power_down_delay" = "150" # 15ms - register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms - register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms - - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # EC range is 0x800-0x9ff - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x00fc0901" - - # EC_SMI is GPIO34 - register "alt_gp_smi_en" = "0x0004" - register "gpe0_en_1" = "0x00000000" - # EC_SCI is GPIO36 - register "gpe0_en_2" = "0x00000010" - register "gpe0_en_3" = "0x00000000" - register "gpe0_en_4" = "0x00000000" - - register "sata_port_map" = "0x1" - register "sio_acpi_mode" = "1" - - # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x7" - register "sata_port1_gen3_dtle" = "0x5" - - # Force enable ASPM for PCIe Port1 - register "pcie_port_force_aspm" = "0x01" - - # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP - register "icc_clock_disable" = "0x013c0000" - - register "s0ix_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - device pci 03.0 on end # mini-hd audio - device pci 13.0 off end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 on end # Serial I/O DMA - device pci 15.1 on end # I2C0 - device pci 15.2 on end # I2C1 - device pci 15.3 off end # GSPI0 - device pci 15.4 off end # GSPI1 - device pci 15.5 off end # UART0 - device pci 15.6 off end # UART1 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 17.0 off end # SDIO - device pci 19.0 off end # GbE - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 off end # PCIe Port #3 - device pci 1c.3 off end # PCIe Port #4 - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1d.0 on end # USB2 EHCI - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller - device pci 1f.3 off end # SMBus - device pci 1f.6 on end # Thermal - end -end diff --git a/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb b/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb new file mode 100644 index 0000000000..67b9131c65 --- /dev/null +++ b/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb @@ -0,0 +1,16 @@ +chip soc/intel/broadwell + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "5" # 400ms + register "gpu_panel_power_up_delay" = "400" # 40ms + register "gpu_panel_power_down_delay" = "150" # 15ms + register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x7" + register "sata_port1_gen3_dtle" = "0x5" + + device domain 0 on end +end diff --git a/src/mainboard/google/auron/variants/buddy/devicetree.cb b/src/mainboard/google/auron/variants/buddy/devicetree.cb deleted file mode 100644 index e12882f413..0000000000 --- a/src/mainboard/google/auron/variants/buddy/devicetree.cb +++ /dev/null @@ -1,110 +0,0 @@ -chip soc/intel/broadwell - - # Enable eDP Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Disable DisplayPort C Hotplug - register "gpu_dp_c_hotplug" = "0x00" - - # Enable HDMI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - # Set backlight PWM value for eDP - register "gpu_pch_backlight_pwm_hz" = "200" - - # Enable Panel and configure power delays - register "gpu_panel_port_select" = "1" # eDP - register "gpu_panel_power_cycle_delay" = "5" # 400ms - register "gpu_panel_power_up_delay" = "400" # 40ms - register "gpu_panel_power_down_delay" = "150" # 15ms - register "gpu_panel_power_backlight_on_delay" = "70" # 7ms - register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms - - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # EC range is 0x800-0x9ff - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x00fc0901" - - # EC_SMI is GPIO34 - register "alt_gp_smi_en" = "0x0004" - register "gpe0_en_1" = "0x00000000" - # EC_SCI is GPIO36 - register "gpe0_en_2" = "0x00000010" - register "gpe0_en_3" = "0x00000000" - register "gpe0_en_4" = "0x00000000" - - register "sata_port_map" = "0x1" - register "sata_devslp_disable" = "0x1" - - register "sio_acpi_mode" = "1" - register "sio_i2c0_voltage" = "1" # 1.8V - register "sio_i2c1_voltage" = "0" # 3.3V - - # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x5" - register "sata_port1_gen3_dtle" = "0x5" - - # Force enable ASPM for PCIe Port 5 - register "pcie_port_force_aspm" = "0x10" - - # Enable port coalescing - register "pcie_port_coalesce" = "1" - - # Disable PCIe CLKOUT 1,5 and CLKOUT_XDP - register "icc_clock_disable" = "0x01220000" - - register "s0ix_enable" = "0" - - device cpu_cluster 0 on - device lapic 0 on end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - device pci 03.0 on end # mini-hd audio - device pci 13.0 on end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 on end # Serial I/O DMA - device pci 15.1 on end # I2C0 - device pci 15.2 on end # I2C1 - device pci 15.3 off end # GSPI0 - device pci 15.4 off end # GSPI1 - device pci 15.5 off end # UART0 - device pci 15.6 off end # UART1 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 17.0 off end # SDIO - device pci 19.0 off end # GbE - device pci 1b.0 off end # High Definition Audio - device pci 1c.0 off end # PCIe Port #1 - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 - LAN (becomes RP1) - device pci 1c.3 on end # PCIe Port #4 - WLAN (becomes RP2) - device pci 1c.4 on end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1d.0 on end # USB2 EHCI - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller - device pci 1f.3 on end # SMBus - device pci 1f.6 on end # Thermal - end -end diff --git a/src/mainboard/google/auron/variants/buddy/overridetree.cb b/src/mainboard/google/auron/variants/buddy/overridetree.cb new file mode 100644 index 0000000000..f814280b15 --- /dev/null +++ b/src/mainboard/google/auron/variants/buddy/overridetree.cb @@ -0,0 +1,39 @@ +chip soc/intel/broadwell + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "5" # 400ms + register "gpu_panel_power_up_delay" = "400" # 40ms + register "gpu_panel_power_down_delay" = "150" # 15ms + register "gpu_panel_power_backlight_on_delay" = "70" # 7ms + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms + + register "sata_devslp_disable" = "0x1" + + register "sio_i2c0_voltage" = "1" # 1.8V + register "sio_i2c1_voltage" = "0" # 3.3V + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" + + # Force enable ASPM for PCIe Port 5 + register "pcie_port_force_aspm" = "0x10" + + # Enable port coalescing + register "pcie_port_coalesce" = "1" + + # Disable PCIe CLKOUT 1,5 and CLKOUT_XDP + register "icc_clock_disable" = "0x01220000" + + register "s0ix_enable" = "0" + + device domain 0 on + device pci 13.0 on end # Smart Sound Audio DSP + device pci 1b.0 off end # High Definition Audio + device pci 1c.0 off end # PCIe Port #1 + device pci 1c.2 on end # PCIe Port #3 - LAN (becomes RP1) + device pci 1c.3 on end # PCIe Port #4 - WLAN (becomes RP2) + device pci 1f.3 on end # SMBus + end +end diff --git a/src/mainboard/google/auron/variants/gandof/devicetree.cb b/src/mainboard/google/auron/variants/gandof/devicetree.cb deleted file mode 100644 index 230f5bd009..0000000000 --- a/src/mainboard/google/auron/variants/gandof/devicetree.cb +++ /dev/null @@ -1,103 +0,0 @@ -chip soc/intel/broadwell - - # Enable eDP Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Disable DisplayPort C Hotplug - register "gpu_dp_c_hotplug" = "0x00" - - # Enable HDMI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - # Set backlight PWM value for eDP - register "gpu_pch_backlight_pwm_hz" = "200" - - # Enable Panel and configure power delays - register "gpu_panel_port_select" = "1" # eDP - register "gpu_panel_power_cycle_delay" = "5" # 400ms - register "gpu_panel_power_up_delay" = "400" # 40ms - register "gpu_panel_power_down_delay" = "150" # 15ms - register "gpu_panel_power_backlight_on_delay" = "500" # 50ms - register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms - - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # EC range is 0x800-0x9ff - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x00fc0901" - - # EC_SMI is GPIO34 - register "alt_gp_smi_en" = "0x0004" - register "gpe0_en_1" = "0x00000000" - # EC_SCI is GPIO36 - register "gpe0_en_2" = "0x00000010" - register "gpe0_en_3" = "0x00000000" - register "gpe0_en_4" = "0x00000000" - - register "sata_port_map" = "0x1" - register "sio_acpi_mode" = "1" - - # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x5" - register "sata_port1_gen3_dtle" = "0x5" - - # Force enable ASPM for PCIe Port1 - register "pcie_port_force_aspm" = "0x01" - - # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP - register "icc_clock_disable" = "0x013c0000" - - register "s0ix_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - device pci 03.0 on end # mini-hd audio - device pci 13.0 off end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 on end # Serial I/O DMA - device pci 15.1 on end # I2C0 - device pci 15.2 on end # I2C1 - device pci 15.3 off end # GSPI0 - device pci 15.4 off end # GSPI1 - device pci 15.5 off end # UART0 - device pci 15.6 off end # UART1 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 17.0 off end # SDIO - device pci 19.0 off end # GbE - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 off end # PCIe Port #3 - device pci 1c.3 off end # PCIe Port #4 - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1d.0 on end # USB2 EHCI - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller - device pci 1f.3 off end # SMBus - device pci 1f.6 on end # Thermal - end -end diff --git a/src/mainboard/google/auron/variants/gandof/overridetree.cb b/src/mainboard/google/auron/variants/gandof/overridetree.cb new file mode 100644 index 0000000000..e35d3a5529 --- /dev/null +++ b/src/mainboard/google/auron/variants/gandof/overridetree.cb @@ -0,0 +1,16 @@ +chip soc/intel/broadwell + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "5" # 400ms + register "gpu_panel_power_up_delay" = "400" # 40ms + register "gpu_panel_power_down_delay" = "150" # 15ms + register "gpu_panel_power_backlight_on_delay" = "500" # 50ms + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" + + device domain 0 on end +end diff --git a/src/mainboard/google/auron/variants/lulu/devicetree.cb b/src/mainboard/google/auron/variants/lulu/devicetree.cb deleted file mode 100644 index 1983045983..0000000000 --- a/src/mainboard/google/auron/variants/lulu/devicetree.cb +++ /dev/null @@ -1,104 +0,0 @@ -chip soc/intel/broadwell - - # Enable eDP Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Disable DisplayPort C Hotplug - register "gpu_dp_c_hotplug" = "0x00" - - # Enable HDMI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - # Set backlight PWM value for eDP - register "gpu_pch_backlight_pwm_hz" = "200" - - # Enable Panel and configure power delays - register "gpu_panel_port_select" = "1" # eDP - register "gpu_panel_power_cycle_delay" = "5" # 400ms - register "gpu_panel_power_up_delay" = "400" # 40ms - register "gpu_panel_power_down_delay" = "150" # 15ms - register "gpu_panel_power_backlight_on_delay" = "70" # 7ms - register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms - - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # EC range is 0x800-0x9ff - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x00fc0901" - - # EC_SMI is GPIO34 - register "alt_gp_smi_en" = "0x0004" - register "gpe0_en_1" = "0x00000000" - # EC_SCI is GPIO36 - register "gpe0_en_2" = "0x00000010" - register "gpe0_en_3" = "0x00000000" - register "gpe0_en_4" = "0x00000000" - - register "sata_port_map" = "0x1" - - register "sio_acpi_mode" = "1" - - # DTLE DATA / EDGE values - register "sata_port0_gen3_dtle" = "0x5" - register "sata_port1_gen3_dtle" = "0x5" - - # Force enable ASPM for PCIe Port1 - register "pcie_port_force_aspm" = "0x01" - - # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP - register "icc_clock_disable" = "0x013c0000" - - register "s0ix_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - device pci 03.0 on end # mini-hd audio - device pci 13.0 off end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 on end # Serial I/O DMA - device pci 15.1 on end # I2C0 - device pci 15.2 on end # I2C1 - device pci 15.3 off end # GSPI0 - device pci 15.4 off end # GSPI1 - device pci 15.5 off end # UART0 - device pci 15.6 off end # UART1 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 17.0 off end # SDIO - device pci 19.0 off end # GbE - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 off end # PCIe Port #3 - device pci 1c.3 off end # PCIe Port #4 - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1d.0 on end # USB2 EHCI - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller - device pci 1f.3 off end # SMBus - device pci 1f.6 on end # Thermal - end -end diff --git a/src/mainboard/google/auron/variants/lulu/overridetree.cb b/src/mainboard/google/auron/variants/lulu/overridetree.cb new file mode 100644 index 0000000000..70b1ebd552 --- /dev/null +++ b/src/mainboard/google/auron/variants/lulu/overridetree.cb @@ -0,0 +1,16 @@ +chip soc/intel/broadwell + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "5" # 400ms + register "gpu_panel_power_up_delay" = "400" # 40ms + register "gpu_panel_power_down_delay" = "150" # 15ms + register "gpu_panel_power_backlight_on_delay" = "70" # 7ms + register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms + + # DTLE DATA / EDGE values + register "sata_port0_gen3_dtle" = "0x5" + register "sata_port1_gen3_dtle" = "0x5" + + device domain 0 on end +end diff --git a/src/mainboard/google/auron/variants/samus/devicetree.cb b/src/mainboard/google/auron/variants/samus/devicetree.cb deleted file mode 100644 index 434ecc80b9..0000000000 --- a/src/mainboard/google/auron/variants/samus/devicetree.cb +++ /dev/null @@ -1,107 +0,0 @@ -chip soc/intel/broadwell - - # Enable eDP Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable DDI1 Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - # Enable DDI2 Hotplug with 6ms pulse - register "gpu_dp_c_hotplug" = "0x06" - - # Set backlight PWM value for eDP - register "gpu_pch_backlight_pwm_hz" = "200" - - # Enable Panel and configure power delays - register "gpu_panel_port_select" = "1" # eDP - register "gpu_panel_power_cycle_delay" = "6" # 500ms - register "gpu_panel_power_up_delay" = "2000" # 200ms - register "gpu_panel_power_down_delay" = "500" # 50ms - register "gpu_panel_power_backlight_on_delay" = "2000" # 200ms - register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms - - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # EC range is 0x800-0x9ff - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x00fc0901" - - # EC_SMI is GPIO34 - register "alt_gp_smi_en" = "0x0004" - register "gpe0_en_1" = "0x00000000" - # EC_SCI is GPIO36 - register "gpe0_en_2" = "0x00000010" - register "gpe0_en_3" = "0x00000000" - register "gpe0_en_4" = "0x00000000" - - register "sata_port_map" = "0x1" - register "sata_port0_gen3_tx" = "0x72" - register "sio_acpi_mode" = "1" - - # Set I2C0 to 1.8V - register "sio_i2c0_voltage" = "1" - - # Force enable ASPM for PCIe Port 3 - register "pcie_port_force_aspm" = "0x04" - register "pcie_port_coalesce" = "1" - - # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP - register "icc_clock_disable" = "0x013b0000" - - # Disable S0ix for now - register "s0ix_enable" = "0" - - register "vr_slow_ramp_rate_set" = "3" - register "vr_slow_ramp_rate_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - device pci 03.0 on end # mini-hd audio - device pci 13.0 on end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 on end # Serial I/O DMA - device pci 15.1 on end # I2C0 - device pci 15.2 on end # I2C1 - device pci 15.3 on end # GSPI0 - device pci 15.4 off end # GSPI1 - device pci 15.5 off end # UART0 - device pci 15.6 off end # UART1 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 17.0 off end # SDIO - device pci 19.0 off end # GbE - device pci 1b.0 off end # High Definition Audio - device pci 1c.0 off end # PCIe Port #1 - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 - device pci 1c.3 off end # PCIe Port #4 - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1d.0 off end # USB2 EHCI - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller - device pci 1f.3 off end # SMBus - device pci 1f.6 on end # Thermal - end -end diff --git a/src/mainboard/google/auron/variants/samus/overridetree.cb b/src/mainboard/google/auron/variants/samus/overridetree.cb new file mode 100644 index 0000000000..93e96cac3f --- /dev/null +++ b/src/mainboard/google/auron/variants/samus/overridetree.cb @@ -0,0 +1,40 @@ +chip soc/intel/broadwell + + # Enable DDI2 Hotplug with 6ms pulse + register "gpu_dp_c_hotplug" = "0x06" + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "6" # 500ms + register "gpu_panel_power_up_delay" = "2000" # 200ms + register "gpu_panel_power_down_delay" = "500" # 50ms + register "gpu_panel_power_backlight_on_delay" = "2000" # 200ms + register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms + + register "sata_port0_gen3_tx" = "0x72" + + # Set I2C0 to 1.8V + register "sio_i2c0_voltage" = "1" + + # Force enable ASPM for PCIe Port 3 + register "pcie_port_force_aspm" = "0x04" + register "pcie_port_coalesce" = "1" + + # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013b0000" + + # Disable S0ix for now + register "s0ix_enable" = "0" + + register "vr_slow_ramp_rate_set" = "3" + register "vr_slow_ramp_rate_enable" = "1" + + device domain 0 on + device pci 13.0 on end # Smart Sound Audio DSP + device pci 15.3 on end # GSPI0 + device pci 1b.0 off end # High Definition Audio + device pci 1c.0 off end # PCIe Port #1 + device pci 1c.2 on end # PCIe Port #3 + device pci 1d.0 off end # USB2 EHCI + end +end |