diff options
| -rw-r--r-- | src/southbridge/intel/lynxpoint/pch.h | 42 | ||||
| -rw-r--r-- | src/southbridge/intel/lynxpoint/sata.c | 20 |
2 files changed, 5 insertions, 57 deletions
diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h index 429dcc032b..283335605d 100644 --- a/src/southbridge/intel/lynxpoint/pch.h +++ b/src/southbridge/intel/lynxpoint/pch.h @@ -215,51 +215,11 @@ void mainboard_config_rcba(void); /* PCI Configuration Space (D31:F2): SATA */ #define PCH_SATA_DEV PCI_DEV(0, 0x1f, 2) #define PCH_SATA2_DEV PCI_DEV(0, 0x1f, 5) -#define INTR_LN 0x3c + #define IDE_TIM_PRI 0x40 /* IDE timings, primary */ #define IDE_DECODE_ENABLE (1 << 15) -#define IDE_SITRE (1 << 14) -#define IDE_ISP_5_CLOCKS (0 << 12) -#define IDE_ISP_4_CLOCKS (1 << 12) -#define IDE_ISP_3_CLOCKS (2 << 12) -#define IDE_RCT_4_CLOCKS (0 << 8) -#define IDE_RCT_3_CLOCKS (1 << 8) -#define IDE_RCT_2_CLOCKS (2 << 8) -#define IDE_RCT_1_CLOCKS (3 << 8) -#define IDE_DTE1 (1 << 7) -#define IDE_PPE1 (1 << 6) -#define IDE_IE1 (1 << 5) -#define IDE_TIME1 (1 << 4) -#define IDE_DTE0 (1 << 3) -#define IDE_PPE0 (1 << 2) -#define IDE_IE0 (1 << 1) -#define IDE_TIME0 (1 << 0) #define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ -#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */ -#define IDE_SSDE1 (1 << 3) -#define IDE_SSDE0 (1 << 2) -#define IDE_PSDE1 (1 << 1) -#define IDE_PSDE0 (1 << 0) - -#define IDE_SDMA_TIM 0x4a - -#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */ -#define SIG_MODE_SEC_NORMAL (0 << 18) -#define SIG_MODE_SEC_TRISTATE (1 << 18) -#define SIG_MODE_SEC_DRIVELOW (2 << 18) -#define SIG_MODE_PRI_NORMAL (0 << 16) -#define SIG_MODE_PRI_TRISTATE (1 << 16) -#define SIG_MODE_PRI_DRIVELOW (2 << 16) -#define FAST_SCB1 (1 << 15) -#define FAST_SCB0 (1 << 14) -#define FAST_PCB1 (1 << 13) -#define FAST_PCB0 (1 << 12) -#define SCB1 (1 << 3) -#define SCB0 (1 << 2) -#define PCB1 (1 << 1) -#define PCB0 (1 << 0) - #define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ #define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ #define SATA_SP 0xd0 /* Scratchpad */ diff --git a/src/southbridge/intel/lynxpoint/sata.c b/src/southbridge/intel/lynxpoint/sata.c index d8eb2a814b..6899e81351 100644 --- a/src/southbridge/intel/lynxpoint/sata.c +++ b/src/southbridge/intel/lynxpoint/sata.c @@ -58,22 +58,10 @@ static void sata_init(struct device *dev) /* Set Interrupt Line */ /* Interrupt Pin is set by D31IP.PIP */ - pci_write_config8(dev, INTR_LN, 0x0a); - - /* Set timings */ - pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | - IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | - IDE_PPE0 | IDE_IE0 | IDE_TIME0); - pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | - IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS); - - /* Sync DMA */ - pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0); - pci_write_config16(dev, IDE_SDMA_TIM, 0x0001); - - /* Set IDE I/O Configuration */ - reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0; - pci_write_config32(dev, IDE_CONFIG, reg32); + pci_write_config8(dev, PCI_INTERRUPT_LINE, 0x0a); + + pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE); + pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE); /* for AHCI, Port Enable is managed in memory mapped space */ pci_update_config16(dev, 0x92, ~0x3f, 0x8000 | config->sata_port_map); |