diff options
61 files changed, 162 insertions, 162 deletions
diff --git a/src/superio/fintek/common/early_serial.c b/src/superio/fintek/common/early_serial.c index d74b786d50..4433d1101f 100644 --- a/src/superio/fintek/common/early_serial.c +++ b/src/superio/fintek/common/early_serial.c @@ -46,7 +46,7 @@ #define FINTEK_EXIT_KEY 0xAA /* Enable configuration: pass entry key '0x87' into index port dev. */ -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(FINTEK_ENTRY_KEY, port); @@ -54,14 +54,14 @@ static void pnp_enter_conf_state(device_t dev) } /* Disable configuration: pass exit key '0xAA' into index port dev. */ -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(FINTEK_EXIT_KEY, port); } /* Bring up early serial debugging output before the RAM is initialized. */ -void fintek_enable_serial(device_t dev, u16 iobase) +void fintek_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); diff --git a/src/superio/fintek/common/fintek.h b/src/superio/fintek/common/fintek.h index a08cf92264..1bc308b210 100644 --- a/src/superio/fintek/common/fintek.h +++ b/src/superio/fintek/common/fintek.h @@ -24,6 +24,6 @@ #include <arch/io.h> #include <stdint.h> -void fintek_enable_serial(device_t dev, u16 iobase); +void fintek_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_FINTEK_COMMON_ROMSTAGE_H */ diff --git a/src/superio/intel/i3100/early_serial.c b/src/superio/intel/i3100/early_serial.c index f95cf8a533..96bb5501cf 100644 --- a/src/superio/intel/i3100/early_serial.c +++ b/src/superio/intel/i3100/early_serial.c @@ -21,7 +21,7 @@ #include <arch/io.h> #include "i3100.h" -static void pnp_enter_ext_func_mode(device_t dev) +static void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; @@ -29,7 +29,7 @@ static void pnp_enter_ext_func_mode(device_t dev) outb(0x86, port); } -static void pnp_exit_ext_func_mode(device_t dev) +static void pnp_exit_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; @@ -38,14 +38,14 @@ static void pnp_exit_ext_func_mode(device_t dev) } /* Enable device interrupts, set UART_CLK predivide. */ -static void i3100_configure_uart_clk(device_t dev, u8 predivide) +static void i3100_configure_uart_clk(pnp_devfn_t dev, u8 predivide) { pnp_enter_ext_func_mode(dev); pnp_write_config(dev, I3100_SIW_CONFIGURATION, (predivide << 2) | 1); pnp_exit_ext_func_mode(dev); } -static void i3100_enable_serial(device_t dev, u16 iobase) +static void i3100_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_ext_func_mode(dev); pnp_set_logical_device(dev); diff --git a/src/superio/ite/common/early_serial.c b/src/superio/ite/common/early_serial.c index 73354d458c..a57c047c1c 100644 --- a/src/superio/ite/common/early_serial.c +++ b/src/superio/ite/common/early_serial.c @@ -33,14 +33,14 @@ #define ITE_CONFIG_REG_WATCHDOG 0x72 /* watchdog config */ /* Helper procedure */ -static void ite_sio_write(device_t dev, u8 reg, u8 value) +static void ite_sio_write(pnp_devfn_t dev, u8 reg, u8 value) { pnp_set_logical_device(dev); pnp_write_config(dev, reg, value); } /* Enable configuration */ -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; @@ -51,12 +51,12 @@ static void pnp_enter_conf_state(device_t dev) } /* Disable configuration */ -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { ite_sio_write(dev, ITE_CONFIG_REG_CC, 0x02); } -void ite_reg_write(device_t dev, u8 reg, u8 value) +void ite_reg_write(pnp_devfn_t dev, u8 reg, u8 value) { pnp_enter_conf_state(dev); ite_sio_write(dev, reg, value); @@ -71,13 +71,13 @@ void ite_reg_write(device_t dev, u8 reg, u8 value) * ITE_UART_CLK_PREDIVIDE_24 * ITE_UART_CLK_PREDIVIDE_48 (default) */ -void ite_conf_clkin(device_t dev, u8 predivide) +void ite_conf_clkin(pnp_devfn_t dev, u8 predivide) { ite_reg_write(dev, ITE_CONFIG_REG_CLOCKSEL, (0x1 & predivide)); } /* Bring up early serial debugging output before the RAM is initialized. */ -void ite_enable_serial(device_t dev, u16 iobase) +void ite_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); @@ -101,7 +101,7 @@ void ite_enable_serial(device_t dev, u16 iobase) * and pass: GPIO_DEV */ -void ite_enable_3vsbsw(device_t dev) +void ite_enable_3vsbsw(pnp_devfn_t dev) { u8 tmp; pnp_enter_conf_state(dev); @@ -118,7 +118,7 @@ void ite_enable_3vsbsw(device_t dev) * and pass: GPIO_DEV */ -void ite_kill_watchdog(device_t dev) +void ite_kill_watchdog(pnp_devfn_t dev) { pnp_enter_conf_state(dev); ite_sio_write(dev, ITE_CONFIG_REG_WATCHDOG, 0x00); diff --git a/src/superio/ite/common/ite.h b/src/superio/ite/common/ite.h index 5389f1416c..c732664db6 100644 --- a/src/superio/ite/common/ite.h +++ b/src/superio/ite/common/ite.h @@ -27,12 +27,12 @@ #define ITE_UART_CLK_PREDIVIDE_48 0x00 /* default */ #define ITE_UART_CLK_PREDIVIDE_24 0x01 -void ite_conf_clkin(device_t dev, u8 predivide); -void ite_enable_serial(device_t dev, u16 iobase); +void ite_conf_clkin(pnp_devfn_t dev, u8 predivide); +void ite_enable_serial(pnp_devfn_t dev, u16 iobase); /* Some boards need to init wdt+gpio's very early */ -void ite_reg_write(device_t dev, u8 reg, u8 value); -void ite_enable_3vsbsw(device_t dev); -void ite_kill_watchdog(device_t dev); +void ite_reg_write(pnp_devfn_t dev, u8 reg, u8 value); +void ite_enable_3vsbsw(pnp_devfn_t dev); +void ite_kill_watchdog(pnp_devfn_t dev); #endif /* SUPERIO_ITE_COMMON_ROMSTAGE_H */ diff --git a/src/superio/ite/it8661f/early_serial.c b/src/superio/ite/it8661f/early_serial.c index 7373f71975..19d60b1eb8 100644 --- a/src/superio/ite/it8661f/early_serial.c +++ b/src/superio/ite/it8661f/early_serial.c @@ -26,7 +26,7 @@ /* Base address 0x3f0: 0x86 0x80 0x55 0x55. */ /* Base address 0x3bd: 0x86 0x80 0x55 0xaa. */ /* Base address 0x370: 0x86 0x80 0xaa 0x55. */ -static void pnp_enter_ext_func_mode(device_t dev) +static void pnp_enter_ext_func_mode(pnp_devfn_t dev) { int i; u16 port = dev >> 8; @@ -42,7 +42,7 @@ static void pnp_enter_ext_func_mode(device_t dev) outb(init_values[i], port); } -static void pnp_exit_ext_func_mode(device_t dev) +static void pnp_exit_ext_func_mode(pnp_devfn_t dev) { pnp_write_config(dev, IT8661F_REG_CC, (1 << 1)); } @@ -55,21 +55,21 @@ static void pnp_exit_ext_func_mode(device_t dev) * * Bits: FDC (0), Com1 (1), Com2 (2), PP (3), IR (4). Bits 5-7 are reserved. */ -static void it8661f_enable_logical_devices(device_t dev) +static void it8661f_enable_logical_devices(pnp_devfn_t dev) { pnp_enter_ext_func_mode(dev); pnp_write_config(dev, IT8661F_REG_LDE, 0x1f); pnp_exit_ext_func_mode(dev); } -static void it8661f_set_clkin(device_t dev, u8 clkin) +static void it8661f_set_clkin(pnp_devfn_t dev, u8 clkin) { pnp_enter_ext_func_mode(dev); pnp_write_config(dev, IT8661F_REG_SWSUSP, (clkin << 1)); pnp_exit_ext_func_mode(dev); } -void it8661f_enable_serial(device_t dev, u16 iobase) +void it8661f_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_ext_func_mode(dev); pnp_set_logical_device(dev); diff --git a/src/superio/ite/it8661f/it8661f.h b/src/superio/ite/it8661f/it8661f.h index 045a54c46c..297dea3d21 100644 --- a/src/superio/ite/it8661f/it8661f.h +++ b/src/superio/ite/it8661f/it8661f.h @@ -52,6 +52,6 @@ static const u8 init_values[] = { 0xe8, 0x74, 0x3a, 0x9d, /**/ 0xce, 0xe7, 0x73, 0x39, }; -void it8661f_enable_serial(device_t dev, u16 iobase); +void it8661f_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_ITE_IT8661F_H */ diff --git a/src/superio/ite/it8671f/early_serial.c b/src/superio/ite/it8671f/early_serial.c index 9f35b8ad8e..89feb5f6f7 100644 --- a/src/superio/ite/it8671f/early_serial.c +++ b/src/superio/ite/it8671f/early_serial.c @@ -89,7 +89,7 @@ void it8671f_48mhz_clkin(void) } /* Enable the serial port(s). */ -void it8671f_enable_serial(device_t dev, u16 iobase) +void it8671f_enable_serial(pnp_devfn_t dev, u16 iobase) { it8671f_enter_conf(); diff --git a/src/superio/ite/it8671f/it8671f.h b/src/superio/ite/it8671f/it8671f.h index c3865ff74e..90f14814da 100644 --- a/src/superio/ite/it8671f/it8671f.h +++ b/src/superio/ite/it8671f/it8671f.h @@ -34,6 +34,6 @@ #define IT8671F_KBCM 0x06 /* PS/2 mouse */ void it8671f_48mhz_clkin(void); -void it8671f_enable_serial(device_t dev, u16 iobase); +void it8671f_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_ITE_IT8671F__H */ diff --git a/src/superio/ite/it8718f/early_serial.c b/src/superio/ite/it8718f/early_serial.c index 166c8569b6..563132af84 100644 --- a/src/superio/ite/it8718f/early_serial.c +++ b/src/superio/ite/it8718f/early_serial.c @@ -27,7 +27,7 @@ * mechanism. It lives in the GPIO LDN. However, register 0xEF is not * mentioned in the IT8718F datasheet so just hardcode it to 0x7E for now. */ -void it8718f_disable_reboot(device_t dev) +void it8718f_disable_reboot(pnp_devfn_t dev) { ite_reg_write(dev, 0xEF, 0x7E); } diff --git a/src/superio/ite/it8718f/it8718f.h b/src/superio/ite/it8718f/it8718f.h index 61c75cf170..c0a79c2664 100644 --- a/src/superio/ite/it8718f/it8718f.h +++ b/src/superio/ite/it8718f/it8718f.h @@ -35,6 +35,6 @@ #define IT8718F_GPIO 0x07 /* GPIO */ #define IT8718F_IR 0x0a /* Consumer IR */ -void it8718f_disable_reboot(device_t dev); +void it8718f_disable_reboot(pnp_devfn_t dev); #endif /* SUPERIO_ITE_IT8718F_H */ diff --git a/src/superio/ite/it8772f/early_init.c b/src/superio/ite/it8772f/early_init.c index 1ae80c8294..55e06f74b9 100644 --- a/src/superio/ite/it8772f/early_init.c +++ b/src/superio/ite/it8772f/early_init.c @@ -26,8 +26,8 @@ /* NOTICE: This file is deprecated, use ite/common instead */ /* RAMstage equiv */ -/* u8 pnp_read_config(device_t dev, u8 reg) */ -u8 it8772f_sio_read(device_t dev, u8 reg) +/* u8 pnp_read_config(pnp_devfn_t dev, u8 reg) */ +u8 it8772f_sio_read(pnp_devfn_t dev, u8 reg) { u16 port = dev >> 8; @@ -36,8 +36,8 @@ u8 it8772f_sio_read(device_t dev, u8 reg) } /* RAMstage equiv */ -/* void pnp_write_config(device_t dev, u8 reg, u8 value) */ -void it8772f_sio_write(device_t dev, u8 reg, u8 value) +/* void pnp_write_config(pnp_devfn_t dev, u8 reg, u8 value) */ +void it8772f_sio_write(pnp_devfn_t dev, u8 reg, u8 value) { u16 port = dev >> 8; @@ -45,7 +45,7 @@ void it8772f_sio_write(device_t dev, u8 reg, u8 value) outb(value, port + 1); } -void it8772f_enter_conf(device_t dev) +void it8772f_enter_conf(pnp_devfn_t dev) { u16 port = dev >> 8; @@ -55,13 +55,13 @@ void it8772f_enter_conf(device_t dev) outb((port == 0x4e) ? 0xaa : 0x55, port); } -void it8772f_exit_conf(device_t dev) +void it8772f_exit_conf(pnp_devfn_t dev) { it8772f_sio_write(dev, IT8772F_CONFIG_REG_CC, 0x02); } /* Set AC resume to be up to the Southbridge */ -void it8772f_ac_resume_southbridge(device_t dev) +void it8772f_ac_resume_southbridge(pnp_devfn_t dev) { it8772f_enter_conf(dev); it8772f_sio_write(dev, IT8772F_CONFIG_REG_LDN, IT8772F_EC); @@ -70,7 +70,7 @@ void it8772f_ac_resume_southbridge(device_t dev) } /* Configure a set of GPIOs */ -void it8772f_gpio_setup(device_t dev, int set, u8 select, u8 polarity, +void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup, u8 output, u8 enable) { set--; /* Set 1 is offset 0 */ diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h index 09eeb8f381..43e7d4cf43 100644 --- a/src/superio/ite/it8772f/it8772f.h +++ b/src/superio/ite/it8772f/it8772f.h @@ -106,10 +106,10 @@ #include <arch/io.h> #include <stdint.h> -u8 it8772f_sio_read(device_t dev, u8 reg); -void it8772f_sio_write(device_t dev, u8 reg, u8 value); -void it8772f_ac_resume_southbridge(device_t dev); -void it8772f_gpio_setup(device_t dev, int set, u8 select, u8 polarity, +u8 it8772f_sio_read(pnp_devfn_t dev, u8 reg); +void it8772f_sio_write(pnp_devfn_t dev, u8 reg, u8 value); +void it8772f_ac_resume_southbridge(pnp_devfn_t dev); +void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup, u8 output, u8 enable); /* FIXME: should be static so will be removed later.. */ @@ -117,7 +117,7 @@ void it8772f_gpio_setup(device_t dev, int set, u8 select, u8 polarity, #define IT8772F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8772F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -void it8772f_enter_conf(device_t dev); -void it8772f_exit_conf(device_t dev); +void it8772f_enter_conf(pnp_devfn_t dev); +void it8772f_exit_conf(pnp_devfn_t dev); #endif /* SUPERIO_ITE_IT8772F_H */ diff --git a/src/superio/nsc/pc8374/early_init.c b/src/superio/nsc/pc8374/early_init.c index d3f601df12..a5e9b950e3 100644 --- a/src/superio/nsc/pc8374/early_init.c +++ b/src/superio/nsc/pc8374/early_init.c @@ -46,7 +46,7 @@ static void pc8374_enable(u16 iobase, u8 *init) } } -static void pc8374_enable_dev(device_t dev, u16 iobase) +static void pc8374_enable_dev(pnp_devfn_t dev, u16 iobase) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); diff --git a/src/superio/nsc/pc87309/early_serial.c b/src/superio/nsc/pc87309/early_serial.c index 6e48e0c05f..da0d5d7f1b 100644 --- a/src/superio/nsc/pc87309/early_serial.c +++ b/src/superio/nsc/pc87309/early_serial.c @@ -22,7 +22,7 @@ #include <device/pnp_def.h> #include "pc87309.h" -void pc87309_enable_serial(device_t dev, u16 iobase) +void pc87309_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); diff --git a/src/superio/nsc/pc87309/pc87309.h b/src/superio/nsc/pc87309/pc87309.h index 5f39b6e121..513576ed53 100644 --- a/src/superio/nsc/pc87309/pc87309.h +++ b/src/superio/nsc/pc87309/pc87309.h @@ -34,6 +34,6 @@ #include <arch/io.h> #include <stdint.h> -void pc87309_enable_serial(device_t dev, u16 iobase); +void pc87309_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_NSC_PC87309_H */ diff --git a/src/superio/nsc/pc87351/early_serial.c b/src/superio/nsc/pc87351/early_serial.c index c34538fd7c..a31f79cb8c 100644 --- a/src/superio/nsc/pc87351/early_serial.c +++ b/src/superio/nsc/pc87351/early_serial.c @@ -22,7 +22,7 @@ #include <arch/io.h> #include "pc87351.h" -static void pc87351_enable_serial(device_t dev, u16 iobase) +static void pc87351_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); diff --git a/src/superio/nsc/pc87360/early_serial.c b/src/superio/nsc/pc87360/early_serial.c index da4abdb330..3deac3b431 100644 --- a/src/superio/nsc/pc87360/early_serial.c +++ b/src/superio/nsc/pc87360/early_serial.c @@ -22,7 +22,7 @@ #include <arch/io.h> #include "pc87360.h" -static void pc87360_enable_serial(device_t dev, u16 iobase) +static void pc87360_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); diff --git a/src/superio/nsc/pc87366/early_serial.c b/src/superio/nsc/pc87366/early_serial.c index e173afd632..e663df6021 100644 --- a/src/superio/nsc/pc87366/early_serial.c +++ b/src/superio/nsc/pc87366/early_serial.c @@ -22,7 +22,7 @@ #include <arch/io.h> #include "pc87366.h" -static void pc87366_enable_serial(device_t dev, u16 iobase) +static void pc87366_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); diff --git a/src/superio/nsc/pc87392/early_serial.c b/src/superio/nsc/pc87392/early_serial.c index 6e85fb96b8..f1e5716aca 100644 --- a/src/superio/nsc/pc87392/early_serial.c +++ b/src/superio/nsc/pc87392/early_serial.c @@ -21,7 +21,7 @@ #include <arch/io.h> #include "pc87392.h" -static void pc87392_enable_serial(device_t dev, u16 iobase) +static void pc87392_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); diff --git a/src/superio/nsc/pc87417/early_init.c b/src/superio/nsc/pc87417/early_init.c index d1870f9cba..42f8cd15c8 100644 --- a/src/superio/nsc/pc87417/early_init.c +++ b/src/superio/nsc/pc87417/early_init.c @@ -23,13 +23,13 @@ #include <arch/io.h> #include "pc87417.h" -static void pc87417_disable_dev(device_t dev) +static void pc87417_disable_dev(pnp_devfn_t dev) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); } -static void pc87417_enable_dev(device_t dev, u16 iobase) +static void pc87417_enable_dev(pnp_devfn_t dev, u16 iobase) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); @@ -37,7 +37,7 @@ static void pc87417_enable_dev(device_t dev, u16 iobase) pnp_set_enable(dev, 1); } -static void xbus_cfg(device_t dev) +static void xbus_cfg(pnp_devfn_t dev) { u8 i, data; u16 xbus_index; diff --git a/src/superio/nsc/pc87417/early_serial.c b/src/superio/nsc/pc87417/early_serial.c index 33bae7e071..42ba941cb7 100644 --- a/src/superio/nsc/pc87417/early_serial.c +++ b/src/superio/nsc/pc87417/early_serial.c @@ -23,7 +23,7 @@ #include <arch/io.h> #include "pc87417.h" -void pc87417_enable_serial(device_t dev, u16 iobase) +void pc87417_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); @@ -31,7 +31,7 @@ void pc87417_enable_serial(device_t dev, u16 iobase) pnp_set_enable(dev, 1); } -void pc87417_enable_dev(device_t dev) +void pc87417_enable_dev(pnp_devfn_t dev) { pnp_set_logical_device(dev); pnp_set_enable(dev, 1); diff --git a/src/superio/nsc/pc87417/pc87417.h b/src/superio/nsc/pc87417/pc87417.h index 73c1fbcd76..e7d5413cc7 100644 --- a/src/superio/nsc/pc87417/pc87417.h +++ b/src/superio/nsc/pc87417/pc87417.h @@ -115,8 +115,8 @@ #define PC87417_XWBCNF 0x16 #if defined(__PRE_RAM__) -void pc87417_enable_serial(device_t dev, u16 iobase); -void pc87417_enable_dev(device_t dev); +void pc87417_enable_serial(pnp_devfn_t dev, u16 iobase); +void pc87417_enable_dev(pnp_devfn_t dev); #endif #endif diff --git a/src/superio/nsc/pc87427/early_init.c b/src/superio/nsc/pc87427/early_init.c index 6df1b9f88d..adaa868fa8 100644 --- a/src/superio/nsc/pc87427/early_init.c +++ b/src/superio/nsc/pc87427/early_init.c @@ -22,13 +22,13 @@ #include <arch/io.h> #include "pc87427.h" -static void pc87427_disable_dev(device_t dev) +static void pc87427_disable_dev(pnp_devfn_t dev) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); } -static void pc87427_enable_dev(device_t dev, u16 iobase) +static void pc87427_enable_dev(pnp_devfn_t dev, u16 iobase) { pnp_set_logical_device(dev); pnp_set_enable(dev, 0); @@ -36,7 +36,7 @@ static void pc87427_enable_dev(device_t dev, u16 iobase) pnp_set_enable(dev, 1); } -static void xbus_cfg(device_t dev) +static void xbus_cfg(pnp_devfn_t dev) { u8 i, data; u16 xbus_index; diff --git a/src/superio/nsc/pc97317/early_serial.c b/src/superio/nsc/pc97317/early_serial.c index 0c215611bc..ad43010838 100644 --- a/src/superio/nsc/pc97317/early_serial.c +++ b/src/superio/nsc/pc97317/early_serial.c @@ -25,7 +25,7 @@ #define PM_BASE 0xe8 /* The PC97317 needs clocks to be set up before the serial port will operate. */ -static void pc97317_enable_serial(device_t dev, u16 iobase) +static void pc97317_enable_serial(pnp_devfn_t dev, u16 iobase) { /* Set base address of power management unit. */ pnp_set_logical_device(PM_DEV); diff --git a/src/superio/nuvoton/common/early_serial.c b/src/superio/nuvoton/common/early_serial.c index 1cbcee8361..dbb0d1394d 100644 --- a/src/superio/nuvoton/common/early_serial.c +++ b/src/superio/nuvoton/common/early_serial.c @@ -49,7 +49,7 @@ /* Enable configuration: pass entry key '0x87' into index port dev * two times. */ -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(NUVOTON_ENTRY_KEY, port); @@ -57,14 +57,14 @@ static void pnp_enter_conf_state(device_t dev) } /* Disable configuration: pass exit key '0xAA' into index port dev. */ -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(NUVOTON_EXIT_KEY, port); } /* Bring up early serial debugging output before the RAM is initialized. */ -void nuvoton_enable_serial(device_t dev, u16 iobase) +void nuvoton_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); diff --git a/src/superio/nuvoton/common/nuvoton.h b/src/superio/nuvoton/common/nuvoton.h index e9e8d4b2c9..43d80a9cad 100644 --- a/src/superio/nuvoton/common/nuvoton.h +++ b/src/superio/nuvoton/common/nuvoton.h @@ -25,6 +25,6 @@ #include <arch/io.h> #include <stdint.h> -void nuvoton_enable_serial(device_t dev, u16 iobase); +void nuvoton_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_NUVOTON_COMMON_ROMSTAGE_H */ diff --git a/src/superio/nuvoton/nct5104d/early_init.c b/src/superio/nuvoton/nct5104d/early_init.c index c9a408ea64..96fac19529 100644 --- a/src/superio/nuvoton/nct5104d/early_init.c +++ b/src/superio/nuvoton/nct5104d/early_init.c @@ -28,7 +28,7 @@ /* Enable configuration: pass entry key '0x87' into index port dev * two times. */ -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(NUVOTON_ENTRY_KEY, port); @@ -36,14 +36,14 @@ static void pnp_enter_conf_state(device_t dev) } /* Disable configuration: pass exit key '0xAA' into index port dev. */ -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(NUVOTON_EXIT_KEY, port); } /* Route UARTD to pins 41-48 */ -void nct5104d_enable_uartd(device_t dev) +void nct5104d_enable_uartd(pnp_devfn_t dev) { u8 tmp; u16 port = dev >> 8; diff --git a/src/superio/nuvoton/nct5104d/nct5104d.h b/src/superio/nuvoton/nct5104d/nct5104d.h index e4dcf3836b..5b12cc5b02 100644 --- a/src/superio/nuvoton/nct5104d/nct5104d.h +++ b/src/superio/nuvoton/nct5104d/nct5104d.h @@ -48,6 +48,6 @@ #define NCT5104D_GPIO1 ((1 << 8) | NCT5104D_GPIO_V) #define NCT5104D_GPIO6 ((6 << 8) | NCT5104D_GPIO_V) -void nct5104d_enable_uartd(device_t dev); +void nct5104d_enable_uartd(pnp_devfn_t dev); #endif /* SUPERIO_NUVOTON_NCT5104D_H */ diff --git a/src/superio/serverengines/pilot/early_init.c b/src/superio/serverengines/pilot/early_init.c index 002210f97b..66356452e5 100644 --- a/src/superio/serverengines/pilot/early_init.c +++ b/src/superio/serverengines/pilot/early_init.c @@ -32,7 +32,7 @@ * Logical device 4, 5 and 7 are being deactivated. Logical Device 1 seems to * be another serial (?), it is also deactivated on the HP machine. */ -void pilot_early_init(device_t dev) +void pilot_early_init(pnp_devfn_t dev) { u16 port = dev >> 8; diff --git a/src/superio/serverengines/pilot/early_serial.c b/src/superio/serverengines/pilot/early_serial.c index 82e124c98c..3e99ef4cb6 100644 --- a/src/superio/serverengines/pilot/early_serial.c +++ b/src/superio/serverengines/pilot/early_serial.c @@ -26,20 +26,20 @@ #include "pilot.h" /* Pilot uses 0x5A/0xA5 pattern to actiavte deactivate config access. */ -void pnp_enter_ext_func_mode(device_t dev) +void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x5A, port); } -void pnp_exit_ext_func_mode(device_t dev) +void pnp_exit_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xA5, port); } /* Serial config is a fairly standard procedure. */ -void pilot_enable_serial(device_t dev, u16 iobase) +void pilot_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_ext_func_mode(dev); pnp_set_logical_device(dev); @@ -48,7 +48,7 @@ void pilot_enable_serial(device_t dev, u16 iobase) pnp_exit_ext_func_mode(dev); } -void pilot_disable_serial(device_t dev) +void pilot_disable_serial(pnp_devfn_t dev) { pnp_enter_ext_func_mode(dev); pnp_set_logical_device(dev); diff --git a/src/superio/serverengines/pilot/pilot.h b/src/superio/serverengines/pilot/pilot.h index e19cf37539..cffa2588b0 100644 --- a/src/superio/serverengines/pilot/pilot.h +++ b/src/superio/serverengines/pilot/pilot.h @@ -31,12 +31,12 @@ #define PILOT_LD7 0x07 /* Logical device 7 */ /* should not expose these however early_init needs love */ -void pnp_enter_ext_func_mode(device_t dev); -void pnp_exit_ext_func_mode(device_t dev); +void pnp_enter_ext_func_mode(pnp_devfn_t dev); +void pnp_exit_ext_func_mode(pnp_devfn_t dev); -void pilot_early_init(device_t dev); +void pilot_early_init(pnp_devfn_t dev); -void pilot_enable_serial(device_t dev, u16 iobase); -void pilot_disable_serial(device_t dev); +void pilot_enable_serial(pnp_devfn_t dev, u16 iobase); +void pilot_disable_serial(pnp_devfn_t dev); #endif /* SUPERIO_SERVERENGINES_PILOT_PILOT_H */ diff --git a/src/superio/smsc/fdc37m60x/early_serial.c b/src/superio/smsc/fdc37m60x/early_serial.c index 38cb0f8f27..80258a91d1 100644 --- a/src/superio/smsc/fdc37m60x/early_serial.c +++ b/src/superio/smsc/fdc37m60x/early_serial.c @@ -46,7 +46,7 @@ static void fdc37m60x_sio_write(uint8_t ldn, u8 index, u8 value) } /* Enable the peripheral devices on the FDC37M60X Super I/O chip. */ -static void fdc37m60x_enable_serial(device_t dev, u16 iobase) +static void fdc37m60x_enable_serial(pnp_devfn_t dev, u16 iobase) { /* (1) Enter the configuration state. */ outb(0x55, FDC37M60X_CONFIGURATION_PORT); diff --git a/src/superio/smsc/kbc1100/early_init.c b/src/superio/smsc/kbc1100/early_init.c index d075f9c2f7..bd42288184 100644 --- a/src/superio/smsc/kbc1100/early_init.c +++ b/src/superio/smsc/kbc1100/early_init.c @@ -26,19 +26,19 @@ #include "kbc1100.h" -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x55, port); } -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); } -void kbc1100_early_serial(device_t dev, u16 iobase) +void kbc1100_early_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); @@ -50,7 +50,7 @@ void kbc1100_early_serial(device_t dev, u16 iobase) void kbc1100_early_init(u16 port) { - device_t dev; + pnp_devfn_t dev; dev = PNP_DEV (port, KBC1100_KBC); pnp_enter_conf_state(dev); diff --git a/src/superio/smsc/kbc1100/kbc1100.h b/src/superio/smsc/kbc1100/kbc1100.h index 2b588f9c91..ec24dd3f9f 100644 --- a/src/superio/smsc/kbc1100/kbc1100.h +++ b/src/superio/smsc/kbc1100/kbc1100.h @@ -36,7 +36,7 @@ #define KBC1100_EC1 0x0D /* EC Channel 1 */ #define KBC1100_EC2 0x0E /* EC Channel 2 */ -void kbc1100_early_serial(device_t dev, u16 iobase); +void kbc1100_early_serial(pnp_devfn_t dev, u16 iobase); void kbc1100_early_init(u16 port); #endif /* SUPERIO_SMSC_KBC1100_H */ diff --git a/src/superio/smsc/lpc47b272/early_serial.c b/src/superio/smsc/lpc47b272/early_serial.c index b2f0d1b724..3624df272f 100644 --- a/src/superio/smsc/lpc47b272/early_serial.c +++ b/src/superio/smsc/lpc47b272/early_serial.c @@ -23,13 +23,13 @@ #include <arch/io.h> #include "lpc47b272.h" -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x55, port); } -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); @@ -42,7 +42,7 @@ static void pnp_exit_conf_state(device_t dev) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param iobase Processor I/O port address to assign to this serial device. */ -static void lpc47b272_enable_serial(device_t dev, u16 iobase) +static void lpc47b272_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); diff --git a/src/superio/smsc/lpc47b397/early_serial.c b/src/superio/smsc/lpc47b397/early_serial.c index 31d515b5c0..953cd4bbb1 100644 --- a/src/superio/smsc/lpc47b397/early_serial.c +++ b/src/superio/smsc/lpc47b397/early_serial.c @@ -23,19 +23,19 @@ #include <arch/io.h> #include "lpc47b397.h" -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x55, port); } -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); } -static void lpc47b397_enable_serial(device_t dev, u16 iobase) +static void lpc47b397_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); diff --git a/src/superio/smsc/lpc47m10x/early_serial.c b/src/superio/smsc/lpc47m10x/early_serial.c index fc6efb91d8..1174120136 100644 --- a/src/superio/smsc/lpc47m10x/early_serial.c +++ b/src/superio/smsc/lpc47m10x/early_serial.c @@ -21,13 +21,13 @@ #include <arch/io.h> #include "lpc47m10x.h" -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x55, port); } -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); @@ -40,7 +40,7 @@ static void pnp_exit_conf_state(device_t dev) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param iobase Processor I/O port address to assign to this serial device. */ -static void lpc47m10x_enable_serial(device_t dev, u16 iobase) +static void lpc47m10x_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); diff --git a/src/superio/smsc/lpc47m15x/early_serial.c b/src/superio/smsc/lpc47m15x/early_serial.c index 5686f52106..0a42ad3206 100644 --- a/src/superio/smsc/lpc47m15x/early_serial.c +++ b/src/superio/smsc/lpc47m15x/early_serial.c @@ -25,19 +25,19 @@ #include "lpc47m15x.h" -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x55, port); } -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); } -void lpc47m15x_enable_serial(device_t dev, u16 iobase) +void lpc47m15x_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); diff --git a/src/superio/smsc/lpc47m15x/lpc47m15x.h b/src/superio/smsc/lpc47m15x/lpc47m15x.h index 32cff48f01..ee9e9c675a 100644 --- a/src/superio/smsc/lpc47m15x/lpc47m15x.h +++ b/src/superio/smsc/lpc47m15x/lpc47m15x.h @@ -34,6 +34,6 @@ #include <arch/io.h> #include <stdint.h> -void lpc47m15x_enable_serial(device_t dev, u16 iobase); +void lpc47m15x_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_SMSC_LPC47M15X_H */ diff --git a/src/superio/smsc/lpc47n217/early_serial.c b/src/superio/smsc/lpc47n217/early_serial.c index 451628a449..7405f3296c 100644 --- a/src/superio/smsc/lpc47n217/early_serial.c +++ b/src/superio/smsc/lpc47n217/early_serial.c @@ -24,13 +24,13 @@ #include <assert.h> #include "lpc47n217.h" -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x55, port); } -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); @@ -42,7 +42,7 @@ static void pnp_exit_conf_state(device_t dev) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param iobase Base I/O port for the logical device. */ -static void lpc47n217_pnp_set_iobase(device_t dev, u16 iobase) +static void lpc47n217_pnp_set_iobase(pnp_devfn_t dev, u16 iobase) { /* LPC47N217 requires base ports to be a multiple of 4. */ ASSERT(!(iobase & 0x3)); @@ -74,7 +74,7 @@ static void lpc47n217_pnp_set_iobase(device_t dev, u16 iobase) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param enable 0 to disable, anythig else to enable. */ -static void lpc47n217_pnp_set_enable(device_t dev, int enable) +static void lpc47n217_pnp_set_enable(pnp_devfn_t dev, int enable) { u8 power_register = 0, power_mask = 0, current_power, new_power; @@ -109,7 +109,7 @@ static void lpc47n217_pnp_set_enable(device_t dev, int enable) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param iobase Processor I/O port address to assign to this serial device. */ -static void lpc47n217_enable_serial(device_t dev, u16 iobase) +static void lpc47n217_enable_serial(pnp_devfn_t dev, u16 iobase) { /* * NOTE: Cannot use pnp_set_XXX() here because they assume chip diff --git a/src/superio/smsc/lpc47n227/early_serial.c b/src/superio/smsc/lpc47n227/early_serial.c index 4aea7c57fc..64a6d84a2c 100644 --- a/src/superio/smsc/lpc47n227/early_serial.c +++ b/src/superio/smsc/lpc47n227/early_serial.c @@ -23,13 +23,13 @@ #include <arch/io.h> #include "lpc47n227.h" -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x55, port); } -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); @@ -41,7 +41,7 @@ static void pnp_exit_conf_state(device_t dev) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param iobase Base I/O port for the logical device. */ -static void lpc47n227_pnp_set_iobase(device_t dev, u16 iobase) +static void lpc47n227_pnp_set_iobase(pnp_devfn_t dev, u16 iobase) { /* LPC47N227 requires base ports to be a multiple of 4. */ /* it's not very useful to do an ASSERT here: if it trips, @@ -76,7 +76,7 @@ static void lpc47n227_pnp_set_iobase(device_t dev, u16 iobase) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param enable 0 to disable, anythig else to enable. */ -static void lpc47n227_pnp_set_enable(device_t dev, int enable) +static void lpc47n227_pnp_set_enable(pnp_devfn_t dev, int enable) { u8 power_register = 0, power_mask = 0, current_power, new_power; @@ -111,7 +111,7 @@ static void lpc47n227_pnp_set_enable(device_t dev, int enable) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param iobase Processor I/O port address to assign to this serial device. */ -static void lpc47n227_enable_serial(device_t dev, u16 iobase) +static void lpc47n227_enable_serial(pnp_devfn_t dev, u16 iobase) { /* * NOTE: Cannot use pnp_set_XXX() here because they assume chip diff --git a/src/superio/smsc/sch4037/sch4037_early_init.c b/src/superio/smsc/sch4037/sch4037_early_init.c index 099e5f27c6..56af87aafc 100644 --- a/src/superio/smsc/sch4037/sch4037_early_init.c +++ b/src/superio/smsc/sch4037/sch4037_early_init.c @@ -24,13 +24,13 @@ #include "sch4037.h" -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { unsigned port = dev >> 8; outb(0x55, port); } -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { unsigned port = dev >> 8; outb(0xaa, port); @@ -38,7 +38,7 @@ static void pnp_exit_conf_state(device_t dev) void sch4037_early_init(unsigned port) { - device_t dev; + pnp_devfn_t dev; dev = PNP_DEV(port, SMSCSUPERIO_SP1); pnp_enter_conf_state(dev); diff --git a/src/superio/smsc/sio1036/sio1036.h b/src/superio/smsc/sio1036/sio1036.h index fa52a1a5c8..ba7a9327fc 100644 --- a/src/superio/smsc/sio1036/sio1036.h +++ b/src/superio/smsc/sio1036/sio1036.h @@ -29,6 +29,6 @@ #include <arch/io.h> #include <stdint.h> -void sio1036_enable_serial(device_t dev, u16 iobase); +void sio1036_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_SMSC_1306_H */ diff --git a/src/superio/smsc/sio1036/sio1036_early_init.c b/src/superio/smsc/sio1036/sio1036_early_init.c index 5f10230c84..b37e81b974 100644 --- a/src/superio/smsc/sio1036/sio1036_early_init.c +++ b/src/superio/smsc/sio1036/sio1036_early_init.c @@ -24,13 +24,13 @@ #include "sio1036.h" -static inline void sio1036_enter_conf_state(device_t dev) +static inline void sio1036_enter_conf_state(pnp_devfn_t dev) { unsigned port = dev >> 8; outb(0x55, port); } -static inline void sio1036_exit_conf_state(device_t dev) +static inline void sio1036_exit_conf_state(pnp_devfn_t dev) { unsigned port = dev >> 8; outb(0xaa, port); @@ -39,7 +39,7 @@ static inline void sio1036_exit_conf_state(device_t dev) /* Detect SMSC SIO1036 LPC Debug Card status */ static u8 detect_sio1036_chip(unsigned port) { - device_t dev = PNP_DEV(port, SIO1036_SP1); + pnp_devfn_t dev = PNP_DEV(port, SIO1036_SP1); unsigned data; sio1036_enter_conf_state (dev); @@ -56,7 +56,7 @@ static u8 detect_sio1036_chip(unsigned port) }; } -void sio1036_enable_serial(device_t dev, u16 iobase) +void sio1036_enable_serial(pnp_devfn_t dev, u16 iobase) { unsigned port = dev >> 8; diff --git a/src/superio/smsc/smscsuperio/early_serial.c b/src/superio/smsc/smscsuperio/early_serial.c index e2eea6d719..c058ef5089 100644 --- a/src/superio/smsc/smscsuperio/early_serial.c +++ b/src/superio/smsc/smscsuperio/early_serial.c @@ -29,14 +29,14 @@ #define SMSC_EXIT_KEY 0xAA /* Enable configuration: pass entry key '0x87' into index port dev. */ -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(SMSC_ENTRY_KEY, port); } /* Disable configuration: pass exit key '0xAA' into index port dev. */ -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(SMSC_EXIT_KEY, port); @@ -49,7 +49,7 @@ static void pnp_exit_conf_state(device_t dev) * @param dev The device to use. * @param iobase The I/O base of the serial port (usually 0x3f8/0x2f8). */ -void smscsuperio_enable_serial(device_t dev, u16 iobase) +void smscsuperio_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); diff --git a/src/superio/smsc/smscsuperio/smscsuperio.h b/src/superio/smsc/smscsuperio/smscsuperio.h index 60a58e68bc..8a761ba1f1 100644 --- a/src/superio/smsc/smscsuperio/smscsuperio.h +++ b/src/superio/smsc/smscsuperio/smscsuperio.h @@ -30,6 +30,6 @@ #define SMSCSUPERIO_SP1 4 /* Com1 */ #define SMSCSUPERIO_SP2 5 /* Com2 */ -void smscsuperio_enable_serial(device_t dev, u16 iobase); +void smscsuperio_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_SMSC_SMSCSUPERIO_H */ diff --git a/src/superio/winbond/common/early_serial.c b/src/superio/winbond/common/early_serial.c index 747cc458d0..fd51cd583a 100644 --- a/src/superio/winbond/common/early_serial.c +++ b/src/superio/winbond/common/early_serial.c @@ -46,7 +46,7 @@ #define WINBOND_EXIT_KEY 0xAA /* Enable configuration: pass entry key '0x87' into index port dev. */ -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(WINBOND_ENTRY_KEY, port); @@ -54,14 +54,14 @@ static void pnp_enter_conf_state(device_t dev) } /* Disable configuration: pass exit key '0xAA' into index port dev. */ -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(WINBOND_EXIT_KEY, port); } /* Bring up early serial debugging output before the RAM is initialized. */ -void winbond_enable_serial(device_t dev, u16 iobase) +void winbond_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_conf_state(dev); pnp_set_logical_device(dev); diff --git a/src/superio/winbond/common/winbond.h b/src/superio/winbond/common/winbond.h index 20eefc8029..0f937c1d54 100644 --- a/src/superio/winbond/common/winbond.h +++ b/src/superio/winbond/common/winbond.h @@ -24,6 +24,6 @@ #include <arch/io.h> #include <stdint.h> -void winbond_enable_serial(device_t dev, u16 iobase); +void winbond_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_WINBOND_COMMON_ROMSTAGE_H */ diff --git a/src/superio/winbond/w83627dhg/early_serial.c b/src/superio/winbond/w83627dhg/early_serial.c index 67aaa93343..83f8e34278 100644 --- a/src/superio/winbond/w83627dhg/early_serial.c +++ b/src/superio/winbond/w83627dhg/early_serial.c @@ -24,14 +24,14 @@ #include <stdint.h> #include "w83627dhg.h" -void pnp_enter_ext_func_mode(device_t dev) +void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x87, port); outb(0x87, port); } -void pnp_exit_ext_func_mode(device_t dev) +void pnp_exit_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); @@ -42,7 +42,7 @@ void pnp_exit_ext_func_mode(device_t dev) * {Pin 89, Pin 90} function can be selected as {GP33, GP32}, or * {RSTOUT3#, RSTOUT2#} or {SDA, SCL} */ -void w83627dhg_enable_i2c(device_t dev) +void w83627dhg_enable_i2c(pnp_devfn_t dev) { u8 val; @@ -56,7 +56,7 @@ void w83627dhg_enable_i2c(device_t dev) pnp_exit_ext_func_mode(dev); } -void w83627dhg_set_clksel_48(device_t dev) +void w83627dhg_set_clksel_48(pnp_devfn_t dev) { u8 reg8; diff --git a/src/superio/winbond/w83627dhg/w83627dhg.h b/src/superio/winbond/w83627dhg/w83627dhg.h index 08ea04fa2a..c4ead34e33 100644 --- a/src/superio/winbond/w83627dhg/w83627dhg.h +++ b/src/superio/winbond/w83627dhg/w83627dhg.h @@ -52,9 +52,9 @@ /* Note: There is no GPIO1 on the W83627DHG as per datasheet. */ -void pnp_enter_ext_func_mode(device_t dev); -void pnp_exit_ext_func_mode(device_t dev); -void w83627dhg_enable_i2c(device_t dev); -void w83627dhg_set_clksel_48(device_t dev); +void pnp_enter_ext_func_mode(pnp_devfn_t dev); +void pnp_exit_ext_func_mode(pnp_devfn_t dev); +void w83627dhg_enable_i2c(pnp_devfn_t dev); +void w83627dhg_set_clksel_48(pnp_devfn_t dev); #endif /* SUPERIO_WINBOND_W83627DHG_H */ diff --git a/src/superio/winbond/w83627ehg/early_serial.c b/src/superio/winbond/w83627ehg/early_serial.c index 346d6cf094..e052863694 100644 --- a/src/superio/winbond/w83627ehg/early_serial.c +++ b/src/superio/winbond/w83627ehg/early_serial.c @@ -23,14 +23,14 @@ #include <device/pnp.h> #include "w83627ehg.h" -void pnp_enter_ext_func_mode(device_t dev) +void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x87, port); outb(0x87, port); } -void pnp_exit_ext_func_mode(device_t dev) +void pnp_exit_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); diff --git a/src/superio/winbond/w83627ehg/w83627ehg.h b/src/superio/winbond/w83627ehg/w83627ehg.h index 221de7b889..3d6f56f577 100644 --- a/src/superio/winbond/w83627ehg/w83627ehg.h +++ b/src/superio/winbond/w83627ehg/w83627ehg.h @@ -54,7 +54,7 @@ #define W83627EHG_GPIO4 ((2 << 8) | W83627EHG_GPIO_SUSLED_V) #define W83627EHG_GPIO5 ((3 << 8) | W83627EHG_GPIO_SUSLED_V) -void pnp_enter_ext_func_mode(device_t dev); -void pnp_exit_ext_func_mode(device_t dev); +void pnp_enter_ext_func_mode(pnp_devfn_t dev); +void pnp_exit_ext_func_mode(pnp_devfn_t dev); #endif /* SUPERIO_WINBOND_W83627EHG_H */ diff --git a/src/superio/winbond/w83627hf/early_init.c b/src/superio/winbond/w83627hf/early_init.c index db616aee38..2e275e61cc 100644 --- a/src/superio/winbond/w83627hf/early_init.c +++ b/src/superio/winbond/w83627hf/early_init.c @@ -25,14 +25,14 @@ #include <device/pnp.h> #include "w83627hf.h" -static void pnp_enter_ext_func_mode(device_t dev) +static void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x87, port); outb(0x87, port); } -static void pnp_exit_ext_func_mode(device_t dev) +static void pnp_exit_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); @@ -43,7 +43,7 @@ static void pnp_exit_ext_func_mode(device_t dev) * work around a limitation of ROMCC where we can no make early_serial.c into * link-time symbols and #include early_serial.c. */ -void w83627hf_set_clksel_48(device_t dev) +void w83627hf_set_clksel_48(pnp_devfn_t dev) { u8 reg8; diff --git a/src/superio/winbond/w83627hf/early_serial.c b/src/superio/winbond/w83627hf/early_serial.c index bc251a67e3..694a3fe14d 100644 --- a/src/superio/winbond/w83627hf/early_serial.c +++ b/src/superio/winbond/w83627hf/early_serial.c @@ -24,14 +24,14 @@ #include <arch/io.h> #include "w83627hf.h" -static void pnp_enter_ext_func_mode(device_t dev) +static void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x87, port); outb(0x87, port); } -static void pnp_exit_ext_func_mode(device_t dev) +static void pnp_exit_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); @@ -49,7 +49,7 @@ static void pnp_exit_ext_func_mode(device_t dev) * XXX: ROMCC - everything is inlined, no forwarding function prototypes * declarations are accepted. */ -void w83627hf_enable_serial(device_t dev, u16 iobase) +void w83627hf_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_ext_func_mode(dev); pnp_set_logical_device(dev); @@ -59,7 +59,7 @@ void w83627hf_enable_serial(device_t dev, u16 iobase) pnp_exit_ext_func_mode(dev); } -void w83627hf_set_clksel_48(device_t dev) +void w83627hf_set_clksel_48(pnp_devfn_t dev) { u8 reg8; diff --git a/src/superio/winbond/w83627hf/w83627hf.h b/src/superio/winbond/w83627hf/w83627hf.h index bf7186ea4a..6eeb62bdd1 100644 --- a/src/superio/winbond/w83627hf/w83627hf.h +++ b/src/superio/winbond/w83627hf/w83627hf.h @@ -115,7 +115,7 @@ #include <arch/io.h> -void w83627hf_set_clksel_48(device_t dev); -void w83627hf_enable_serial(device_t dev, u16 iobase); +void w83627hf_set_clksel_48(pnp_devfn_t dev); +void w83627hf_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_WINBOND_W83627HF_H */ diff --git a/src/superio/winbond/w83627thg/w83627thg.h b/src/superio/winbond/w83627thg/w83627thg.h index ec857d3910..8d8537941b 100644 --- a/src/superio/winbond/w83627thg/w83627thg.h +++ b/src/superio/winbond/w83627thg/w83627thg.h @@ -34,9 +34,9 @@ #define W83627THG_ACPI 10 #define W83627THG_HWM 11 /* Hardware monitor */ -void pnp_enter_ext_func_mode(device_t dev); -void pnp_exit_ext_func_mode(device_t dev); +void pnp_enter_ext_func_mode(pnp_devfn_t dev); +void pnp_exit_ext_func_mode(pnp_devfn_t dev); -void w83627thg_set_clksel_48(device_t dev); +void w83627thg_set_clksel_48(pnp_devfn_t dev); #endif /* SUPERIO_WINBOND_W83627THG_W83627THG_H */ diff --git a/src/superio/winbond/w83697hf/early_serial.c b/src/superio/winbond/w83697hf/early_serial.c index 6c00b2765a..515fee95bc 100644 --- a/src/superio/winbond/w83697hf/early_serial.c +++ b/src/superio/winbond/w83697hf/early_serial.c @@ -22,20 +22,20 @@ #include <device/pnp_def.h> #include "w83697hf.h" -static void pnp_enter_ext_func_mode(device_t dev) +static void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x87, port); outb(0x87, port); } -static void pnp_exit_ext_func_mode(device_t dev) +static void pnp_exit_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); } -void w83697hf_set_clksel_48(device_t dev) +void w83697hf_set_clksel_48(pnp_devfn_t dev) { u8 reg8; @@ -47,7 +47,7 @@ void w83697hf_set_clksel_48(device_t dev) } /* Depreciated, use winbond_enable_serial() */ -void w83697hf_enable_serial(device_t dev, u16 iobase) +void w83697hf_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_ext_func_mode(dev); pnp_set_logical_device(dev); diff --git a/src/superio/winbond/w83697hf/w83697hf.h b/src/superio/winbond/w83697hf/w83697hf.h index f711786563..3bd1f44b74 100644 --- a/src/superio/winbond/w83697hf/w83697hf.h +++ b/src/superio/winbond/w83697hf/w83697hf.h @@ -34,9 +34,9 @@ #define W83697HF_ACPI 10 /* ACPI */ #define W83697HF_HWM 11 /* Hardware monitor */ -void w83697hf_set_clksel_48(device_t); +void w83697hf_set_clksel_48(pnp_devfn_t); /* Depreciated, use winbond_enable_serial() */ -void w83697hf_enable_serial(device_t dev, u16 iobase); +void w83697hf_enable_serial(pnp_devfn_t dev, u16 iobase); #endif /* SUPERIO_WINBOND_W83697HF_H */ diff --git a/src/superio/winbond/w83977f/early_serial.c b/src/superio/winbond/w83977f/early_serial.c index c572dcb959..9b5785d961 100644 --- a/src/superio/winbond/w83977f/early_serial.c +++ b/src/superio/winbond/w83977f/early_serial.c @@ -21,20 +21,20 @@ #include <arch/io.h> #include "w83977f.h" -static void pnp_enter_ext_func_mode(device_t dev) +static void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x87, port); outb(0x87, port); } -static void pnp_exit_ext_func_mode(device_t dev) +static void pnp_exit_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); } -static void w83977f_enable_serial(device_t dev, u16 iobase) +static void w83977f_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_ext_func_mode(dev); pnp_set_logical_device(dev); diff --git a/src/superio/winbond/w83977tf/early_serial.c b/src/superio/winbond/w83977tf/early_serial.c index c016515531..866d9f2787 100644 --- a/src/superio/winbond/w83977tf/early_serial.c +++ b/src/superio/winbond/w83977tf/early_serial.c @@ -23,20 +23,20 @@ #include <arch/io.h> #include "w83977tf.h" -static void pnp_enter_ext_func_mode(device_t dev) +static void pnp_enter_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x87, port); outb(0x87, port); } -static void pnp_exit_ext_func_mode(device_t dev) +static void pnp_exit_ext_func_mode(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); } -static void w83977tf_enable_serial(device_t dev, u16 iobase) +static void w83977tf_enable_serial(pnp_devfn_t dev, u16 iobase) { pnp_enter_ext_func_mode(dev); pnp_set_logical_device(dev); |