diff options
| -rw-r--r-- | src/mainboard/google/rush/Kconfig | 5 | ||||
| -rw-r--r-- | src/mainboard/google/rush/Makefile.inc | 5 | ||||
| -rw-r--r-- | src/mainboard/google/rush/memlayout.ld | 4 | ||||
| -rw-r--r-- | src/mainboard/google/rush/verstage.c | 51 |
4 files changed, 64 insertions, 1 deletions
diff --git a/src/mainboard/google/rush/Kconfig b/src/mainboard/google/rush/Kconfig index 94cbed1ea7..95597b00f9 100644 --- a/src/mainboard/google/rush/Kconfig +++ b/src/mainboard/google/rush/Kconfig @@ -78,9 +78,12 @@ config BOOT_MEDIA_SPI_CHIP_SELECT help Which chip select to use for boot media. +# For rush, we are using vboot2. Thus, index for stages: +# VBOOT_ROMSTAGE_INDEX -> Use default value of 0x2 +# VBOOT_RAMSTAGE_INDEX -> Use 0x3 config VBOOT_RAMSTAGE_INDEX hex - default 0x2 + default 0x3 config DRIVER_TPM_I2C_BUS hex diff --git a/src/mainboard/google/rush/Makefile.inc b/src/mainboard/google/rush/Makefile.inc index e41745f1a1..a4d0135f41 100644 --- a/src/mainboard/google/rush/Makefile.inc +++ b/src/mainboard/google/rush/Makefile.inc @@ -31,6 +31,10 @@ bootblock-y += bootblock.c bootblock-y += pmic.c bootblock-y += reset.c +verstage-y += verstage.c +verstage-y += chromeos.c +verstage-y += reset.c + romstage-y += romstage.c romstage-y += sdram_configs.c romstage-$(CONFIG_CHROMEOS) += chromeos.c @@ -44,3 +48,4 @@ ramstage-$(CONFIG_CHROMEOS) += chromeos.c bootblock-y += memlayout.ld romstage-y += memlayout.ld ramstage-y += memlayout.ld +verstage-y += memlayout.ld diff --git a/src/mainboard/google/rush/memlayout.ld b/src/mainboard/google/rush/memlayout.ld index 85f4a97855..5bd72e5126 100644 --- a/src/mainboard/google/rush/memlayout.ld +++ b/src/mainboard/google/rush/memlayout.ld @@ -1 +1,5 @@ +#if IS_ENABLED(CONFIG_VBOOT2_VERIFY_FIRMWARE) +#include <soc/memlayout_vboot2.ld> +#else #include <soc/memlayout_vboot.ld> +#endif diff --git a/src/mainboard/google/rush/verstage.c b/src/mainboard/google/rush/verstage.c new file mode 100644 index 0000000000..0150e465a7 --- /dev/null +++ b/src/mainboard/google/rush/verstage.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2014 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <soc/addressmap.h> +#include <soc/funitcfg.h> +#include <soc/padconfig.h> +#include <soc/verstage.h> +#include <soc/nvidia/tegra/i2c.h> + +static const struct pad_config i2cpad[] = { + /* TPM I2C */ + PAD_CFG_SFIO(CAM_I2C_SCL, PINMUX_INPUT_ENABLE, I2C3), + PAD_CFG_SFIO(CAM_I2C_SDA, PINMUX_INPUT_ENABLE, I2C3), +}; + +static const struct pad_config spipad[] = { + /* EC on SPI1: mosi, miso, clk, cs */ + PAD_CFG_SFIO(ULPI_CLK, PINMUX_INPUT_ENABLE, SPI1), + PAD_CFG_SFIO(ULPI_DIR, PINMUX_INPUT_ENABLE, SPI1), + PAD_CFG_SFIO(ULPI_NXT, PINMUX_INPUT_ENABLE, SPI1), + PAD_CFG_SFIO(ULPI_STP, PINMUX_INPUT_ENABLE, SPI1), +}; + +static const struct funit_cfg funitcfgs[] = { + FUNIT_CFG(SBC1, CLK_M, 3000, spipad, ARRAY_SIZE(spipad)), + FUNIT_CFG(I2C3, PLLP, 400, i2cpad, ARRAY_SIZE(i2cpad)), +}; + +void verstage_mainboard_init(void) +{ + soc_configure_funits(funitcfgs, ARRAY_SIZE(funitcfgs)); + + /* TPM I2C bus */ + i2c_init(2); +} |