diff options
-rw-r--r-- | src/southbridge/amd/sb600/early_setup.c | 20 | ||||
-rw-r--r-- | src/southbridge/amd/sb600/lpc.c | 16 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/early_setup.c | 20 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/lpc.c | 16 |
4 files changed, 28 insertions, 44 deletions
diff --git a/src/southbridge/amd/sb600/early_setup.c b/src/southbridge/amd/sb600/early_setup.c index 45b29c1d58..838ea319f6 100644 --- a/src/southbridge/amd/sb600/early_setup.c +++ b/src/southbridge/amd/sb600/early_setup.c @@ -364,26 +364,8 @@ static void sb600_devices_por_init(void) dev = pci_locate_device(PCI_ID(0x1002, 0x438D), 0); /* DMA enable */ pci_write_config8(dev, 0x40, 0x04); - - /* IO Port Decode Enable */ - pci_write_config8(dev, 0x44, 0xFF); - pci_write_config8(dev, 0x45, 0xFF); - pci_write_config8(dev, 0x46, 0xC3); - pci_write_config8(dev, 0x47, 0xFF); - - // TODO: This has already been done(?) - /* IO/Mem Port Decode Enable, I don't know why CIM disable some ports. - * Disable LPC TimeOut counter, enable SuperIO Configuration Port (2e/2f), - * Alternate SuperIO Configuration Port (4e/4f), Wide Generic IO Port (64/65). */ - byte = pci_read_config8(dev, 0x48); - byte |= (1 << 1) | (1 << 0); /* enable Super IO config port 2e-2h, 4e-4f */ - byte |= 1 << 6; /* enable for RTC I/O range */ - pci_write_config8(dev, 0x48, byte); + /* LPC Sync Timeout */ pci_write_config8(dev, 0x49, 0xFF); - /* Enable 0x480-0x4bf, 0x4700-0x470B */ - byte = pci_read_config8(dev, 0x4A); - byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */ - pci_write_config8(dev, 0x4A, byte); /* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */ pci_write_config8(dev, 0x7C, 0x05); diff --git a/src/southbridge/amd/sb600/lpc.c b/src/southbridge/amd/sb600/lpc.c index 6a17f72318..6f16ea81c7 100644 --- a/src/southbridge/amd/sb600/lpc.c +++ b/src/southbridge/amd/sb600/lpc.c @@ -103,7 +103,8 @@ static void sb600_lpc_enable_childrens_resources(device_t dev) struct bus *link; u32 reg, reg_x; int var_num = 0; - u16 reg_var[3]; + u16 reg_var[3] = {0x0, 0x0, 0x0}; + u8 wiosize = pci_read_config8(dev, 0x74); reg = pci_read_config32(dev, 0x44); reg_x = pci_read_config32(dev, 0x48); @@ -134,13 +135,14 @@ static void sb600_lpc_enable_childrens_resources(device_t dev) case 0x2f8: /* COM2 */ reg |= (1 << 7); break; - case 0x378: /* Parallal 1 */ + case 0x378: /* Parallel 1 */ reg |= (1 << 0); + reg |= (1 << 1); /* + 0x778 for ECP */ break; case 0x3f0: /* FD0 */ reg |= (1 << 26); break; - case 0x220: /* Aduio 0 */ + case 0x220: /* Audio 0 */ reg |= (1 << 8); break; case 0x300: /* Midi 0 */ @@ -170,12 +172,19 @@ static void sb600_lpc_enable_childrens_resources(device_t dev) switch (var_num) { case 0: reg_x |= (1 << 2); + if ((end - base) < 16) + wiosize |= (1 << 0); break; case 1: reg_x |= (1 << 24); + if ((end - base) < 16) + wiosize |= (1 << 2); break; case 2: reg_x |= (1 << 25); + reg_x |= (1 << 24); + if ((end - base) < 16) + wiosize |= (1 << 3); break; } reg_var[var_num++] = @@ -197,6 +206,7 @@ static void sb600_lpc_enable_childrens_resources(device_t dev) pci_write_config16(dev, 0x64, reg_var[0]); break; } + pci_write_config8(dev, 0x74, wiosize); } static void sb600_lpc_enable_resources(device_t dev) diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c index 6a7ea6c9eb..50f4ff70cd 100644 --- a/src/southbridge/amd/sb800/early_setup.c +++ b/src/southbridge/amd/sb800/early_setup.c @@ -450,26 +450,8 @@ static void sb800_devices_por_init(void) /* DMA enable */ pci_write_config8(dev, 0x40, 0x04); - /* IO Port Decode Enable */ - pci_write_config8(dev, 0x44, 0xFF); - pci_write_config8(dev, 0x45, 0xFF); - pci_write_config8(dev, 0x46, 0xC3); - pci_write_config8(dev, 0x47, 0xFF); - - /* IO/Mem Port Decode Enable, I don't know why CIM disable some ports. - * Disable LPC TimeOut counter, enable SuperIO Configuration Port (2e/2f), - * Alternate SuperIO Configuration Port (4e/4f), Wide Generic IO Port (64/65). - * Enable bits for LPC ROM memory address range 1&2 for 1M ROM setting.*/ - byte = pci_read_config8(dev, 0x48); - byte |= (1 << 1) | (1 << 0); /* enable Super IO config port 2e-2h, 4e-4f */ - byte |= (1 << 3) | (1 << 4); /* enable for LPC ROM address range1&2, Enable 512KB rom access at 0xFFF80000 - 0xFFFFFFFF */ - byte |= 1 << 6; /* enable for RTC I/O range */ - pci_write_config8(dev, 0x48, byte); + /* LPC Sync Timeout */ pci_write_config8(dev, 0x49, 0xFF); - /* Enable 0x480-0x4bf, 0x4700-0x470B */ - byte = pci_read_config8(dev, 0x4A); - byte |= ((1 << 1) + (1 << 6)); /*0x42, save the configuraion for port 0x80. */ - pci_write_config8(dev, 0x4A, byte); /* Set LPC ROM size, it has been done in sb800_lpc_init(). * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB; diff --git a/src/southbridge/amd/sb800/lpc.c b/src/southbridge/amd/sb800/lpc.c index 50ff4d4cec..6b72a62327 100644 --- a/src/southbridge/amd/sb800/lpc.c +++ b/src/southbridge/amd/sb800/lpc.c @@ -122,7 +122,8 @@ static void sb800_lpc_enable_childrens_resources(device_t dev) struct bus *link; u32 reg, reg_x; int var_num = 0; - u16 reg_var[3]; + u16 reg_var[3] = {0x0, 0x0, 0x0}; + u8 wiosize = pci_read_config8(dev, 0x74); reg = pci_read_config32(dev, 0x44); reg_x = pci_read_config32(dev, 0x48); @@ -153,13 +154,14 @@ static void sb800_lpc_enable_childrens_resources(device_t dev) case 0x2f8: /* COM2 */ reg |= (1 << 7); break; - case 0x378: /* Parallal 1 */ + case 0x378: /* Parallel 1 */ reg |= (1 << 0); + reg |= (1 << 1); /* + 0x778 for ECP */ break; case 0x3f0: /* FD0 */ reg |= (1 << 26); break; - case 0x220: /* Aduio 0 */ + case 0x220: /* Audio 0 */ reg |= (1 << 8); break; case 0x300: /* Midi 0 */ @@ -189,12 +191,19 @@ static void sb800_lpc_enable_childrens_resources(device_t dev) switch (var_num) { case 0: reg_x |= (1 << 2); + if ((end - base) < 16) + wiosize |= (1 << 0); break; case 1: reg_x |= (1 << 24); + if ((end - base) < 16) + wiosize |= (1 << 2); break; case 2: reg_x |= (1 << 25); + reg_x |= (1 << 24); + if ((end - base) < 16) + wiosize |= (1 << 3); break; } reg_var[var_num++] = @@ -216,6 +225,7 @@ static void sb800_lpc_enable_childrens_resources(device_t dev) pci_write_config16(dev, 0x64, reg_var[0]); break; } + pci_write_config8(dev, 0x74, wiosize); } static void sb800_lpc_enable_resources(device_t dev) |