diff options
| -rw-r--r-- | src/mainboard/google/rex/Kconfig | 2 | ||||
| -rw-r--r-- | src/mainboard/google/rex/variants/screebo/overridetree.cb | 344 |
2 files changed, 343 insertions, 3 deletions
diff --git a/src/mainboard/google/rex/Kconfig b/src/mainboard/google/rex/Kconfig index 528a2dc2c4..6aca9e3557 100644 --- a/src/mainboard/google/rex/Kconfig +++ b/src/mainboard/google/rex/Kconfig @@ -109,7 +109,7 @@ config OVERRIDE_DEVICETREE config DRIVER_TPM_I2C_BUS hex - default 0x4 if BOARD_GOOGLE_REX0 + default 0x4 if BOARD_GOOGLE_REX0 || BOARD_GOOGLE_SCREEBO config DRIVER_TPM_I2C_ADDR hex diff --git a/src/mainboard/google/rex/variants/screebo/overridetree.cb b/src/mainboard/google/rex/variants/screebo/overridetree.cb index 6c284b305b..9e3f9f6511 100644 --- a/src/mainboard/google/rex/variants/screebo/overridetree.cb +++ b/src/mainboard/google/rex/variants/screebo/overridetree.cb @@ -1,6 +1,346 @@ chip soc/intel/meteorlake - device domain 0 on - end + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC1)" # USB2_C1 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C0 + register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A Port A1 + register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # Type-A Port A0 + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port A0 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # USB3/2 Type A port A1 + + register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC0)" + register "tcss_ports[3]" = "TCSS_PORT_DEFAULT(OC1)" + + # Enable eDP in Port A + register "ddi_port_A_config" = "1" + # Enable HDMI in Port B + register "ddi_port_B_config" = "0" + + # Enable Display Port Configuration + register "ddi_ports_config" = "{ + [DDI_PORT_A] = DDI_ENABLE_HPD, + [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, + [DDI_PORT_1] = DDI_ENABLE_HPD, + [DDI_PORT_2] = DDI_ENABLE_HPD, + [DDI_PORT_3] = DDI_ENABLE_HPD, + [DDI_PORT_4] = DDI_ENABLE_HPD, + }" + + register "serial_io_gspi_mode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI1] = PchSerialIoPci, + [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, + }" + + register "serial_io_i2c_mode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Audio | + #| I2C1 | Touchscreen | + #| I2C3 | Touchpad | + #| I2C4 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C5 | UFC | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[4] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 600, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 900, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + }" + + device domain 0 on + device ref dtt on + chip drivers/intel/dptf + ## sensor information + register "options.tsr[0].desc" = ""DDR_SOC"" + register "options.tsr[1].desc" = ""Ambient"" + register "options.tsr[2].desc" = ""Charger"" + + ## Active Policy + # FIXME: below values are initial reference values only + register "policies.active" = "{ + [0] = { + .target = DPTF_TEMP_SENSOR_0, + .thresholds = { + TEMP_PCT(75, 90), + TEMP_PCT(70, 80), + TEMP_PCT(65, 70), + TEMP_PCT(60, 60), + TEMP_PCT(55, 50), + TEMP_PCT(50, 40), + TEMP_PCT(45, 30), + } + }, + [1] = { + .target = DPTF_TEMP_SENSOR_1, + .thresholds = { + TEMP_PCT(75, 90), + TEMP_PCT(70, 80), + TEMP_PCT(65, 70), + TEMP_PCT(60, 60), + TEMP_PCT(55, 50), + TEMP_PCT(50, 40), + TEMP_PCT(45, 30), + } + }, + [2] = { + .target = DPTF_TEMP_SENSOR_2, + .thresholds = { + TEMP_PCT(75, 90), + TEMP_PCT(70, 80), + TEMP_PCT(65, 70), + TEMP_PCT(60, 50), + } + } + }" + + ## Passive Policy + # TODO: below values are initial reference values only + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 5000), + [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 80, 5000), + [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000), + }" + + ## Critical Policy + # TODO: below values are initial reference values only + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN), + }" + + ## Power Limits Control + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 15000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 57000, + .max_power = 57000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 3000 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf" = "{ + [0] = { 90, 6700, 220, 2200, }, + [1] = { 80, 5800, 180, 1800, }, + [2] = { 70, 5000, 145, 1450, }, + [3] = { 60, 4900, 115, 1150, }, + [4] = { 50, 3838, 90, 900, }, + [5] = { 40, 2904, 55, 550, }, + [6] = { 30, 2337, 30, 300, }, + [7] = { 20, 1608, 15, 150, }, + [8] = { 10, 800, 10, 100, }, + [9] = { 0, 0, 0, 50, } + }" + + ## Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 alias dptf_policy on end + end + end + device ref pcie_rp9 on + # Enable SSD Card PCIE 9 using clk 4 + register "pcie_rp[PCH_RP(9)]" = "{ + .clk_src = 4, + .clk_req = 4, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end # PCIE4_P9 SSD card + device ref pcie_rp10 on + # Enable SD Card PCIE4 rp10 using clk 7 + register "pcie_rp[PCH_RP(10)]" = "{ + .clk_src = 7, + .clk_req = 7, + .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER, + }" + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D03)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D02)" + register "srcclk_pin" = "7" + device generic 0 on end + end + end + device ref tbt_pcie_rp0 on end + device ref tbt_pcie_rp2 on end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 1))" + device ref tcss_usb3_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C1 (DB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" + device ref tcss_usb3_port4 on end + end + end + end + end + device ref tcss_dma0 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)" + use tcss_usb3_port2 as dfp[0].typec_port + device generic 0 on end + end + end + device ref tcss_dma1 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)" + use tcss_usb3_port4 as dfp[0].typec_port + device generic 0 on end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C1 (DB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 1))" + device ref usb2_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A1 (MLB)"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref usb2_port3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A0 (MLB)"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))" + device ref usb2_port9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A0 (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))" + device ref usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A1 (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref usb3_port2 on end + end + end + end + end + device ref cnvi_wifi on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + register "add_acpi_dma_property" = "true" + register "enable_cnvi_ddr_rfim" = "true" + device generic 0 on end + end + end + device ref i2c4 on + chip drivers/i2c/tpm + register "hid" = ""GOOG0005"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E03_IRQ)" + device i2c 50 on end + end + end + device ref soc_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + use usb2_port2 as usb2_port + use tcss_usb3_port2 as usb3_port + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + use usb2_port1 as usb2_port + use tcss_usb3_port4 as usb3_port + device generic 1 alias conn1 on end + end + end + end + end + end end |