diff options
-rw-r--r-- | src/mainboard/lenovo/t520/devicetree.cb | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/src/mainboard/lenovo/t520/devicetree.cb b/src/mainboard/lenovo/t520/devicetree.cb index 475e49c02c..c911d997fe 100644 --- a/src/mainboard/lenovo/t520/devicetree.cb +++ b/src/mainboard/lenovo/t520/devicetree.cb @@ -34,6 +34,7 @@ chip northbridge/intel/sandybridge device domain 0 on device pci 00.0 on end # host bridge + device pci 01.0 on end # NVIDIA Corporation GF119M [NVS 4200M] device pci 02.0 on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH @@ -54,7 +55,7 @@ chip northbridge/intel/sandybridge register "gpi1_routing" = "2" register "gpi8_routing" = "2" - # Enable SATA ports 0 + # Enable SATA ports 0 (HDD bay) & 1 (ODD bay) & 2 (mSATA) & 3 (eSATA) & 4 (dock) register "sata_port_map" = "0x1f" # Set max SATA speed to 6.0 Gb/s register "sata_interface_speed_support" = "0x3" @@ -73,11 +74,14 @@ chip northbridge/intel/sandybridge device pci 19.0 on end # Intel Gigabit Ethernet device pci 1a.0 on end # USB2 EHCI #2 device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 + device pci 1c.0 off end # PCIe Port #1 device pci 1c.1 on end # PCIe Port #2 Integrated Wireless LAN - device pci 1c.2 off end - device pci 1c.3 on end # PCIe Port #3 Express Card - device pci 1c.4 on end # PCIe Port #4 MMC/SDXC + IEEE1394 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 on end # PCIe Port #4 Express Card + device pci 1c.4 on end # PCIe Port #5 MMC/SDXC + IEEE1394 + device pci 1c.5 off end # PCIe Port #6 Intel Ethernet PHY + device pci 1c.6 off end # PCIe Port #7 USB 3.0 only W520 + device pci 1c.7 off end # PCIe Port #8 device pci 1d.0 on end # USB2 EHCI #1 device pci 1f.0 on #LPC bridge chip ec/lenovo/pmh7 @@ -100,8 +104,6 @@ chip northbridge/intel/sandybridge register "config2" = "0xa0" register "config3" = "0xc2" - register "has_keyboard_backlight" = "1" - register "beepmask0" = "0x00" register "beepmask1" = "0x86" register "has_power_management_beeps" = "0" |