summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/soc/amd/common/block/lpc/espi_util.c146
1 files changed, 75 insertions, 71 deletions
diff --git a/src/soc/amd/common/block/lpc/espi_util.c b/src/soc/amd/common/block/lpc/espi_util.c
index d495a0e7c4..70bd351966 100644
--- a/src/soc/amd/common/block/lpc/espi_util.c
+++ b/src/soc/amd/common/block/lpc/espi_util.c
@@ -426,7 +426,7 @@ struct espi_cmd {
} __packed;
/* Wait up to ESPI_CMD_TIMEOUT_US for hardware to clear DNCMD_STATUS bit. */
-static int espi_wait_ready(void)
+static enum cb_err espi_wait_ready(void)
{
struct stopwatch sw;
union espi_txhdr0 hdr0;
@@ -435,10 +435,10 @@ static int espi_wait_ready(void)
do {
hdr0.val = espi_read32(ESPI_DN_TX_HDR0);
if (!hdr0.cmd_sts)
- return 0;
+ return CB_SUCCESS;
} while (!stopwatch_expired(&sw));
- return -1;
+ return CB_ERR;
}
/* Clear interrupt status register */
@@ -453,7 +453,7 @@ static void espi_clear_status(void)
* Wait up to ESPI_CMD_TIMEOUT_US for interrupt status register to update after sending a
* command.
*/
-static int espi_poll_status(uint32_t *status)
+static enum cb_err espi_poll_status(uint32_t *status)
{
struct stopwatch sw;
@@ -461,12 +461,12 @@ static int espi_poll_status(uint32_t *status)
do {
*status = espi_read32(ESPI_SLAVE0_INT_STS);
if (*status)
- return 0;
+ return CB_SUCCESS;
} while (!stopwatch_expired(&sw));
printk(BIOS_ERR, "Error: eSPI timed out waiting for status update.\n");
- return -1;
+ return CB_ERR;
}
static void espi_show_failure(const struct espi_cmd *cmd, const char *str, uint32_t status)
@@ -476,7 +476,7 @@ static void espi_show_failure(const struct espi_cmd *cmd, const char *str, uint3
printk(BIOS_ERR, "%s (Status = 0x%x)\n", str, status);
}
-static int espi_send_command(const struct espi_cmd *cmd)
+static enum cb_err espi_send_command(const struct espi_cmd *cmd)
{
uint32_t status;
@@ -484,9 +484,9 @@ static int espi_send_command(const struct espi_cmd *cmd)
printk(BIOS_DEBUG, "eSPI cmd0-cmd2: %08x %08x %08x data: %08x.\n",
cmd->hdr0.val, cmd->hdr1.val, cmd->hdr2.val, cmd->data.val);
- if (espi_wait_ready() == -1) {
+ if (espi_wait_ready() != CB_SUCCESS) {
espi_show_failure(cmd, "Error: eSPI was not ready to accept a command", 0);
- return -1;
+ return CB_ERR;
}
espi_clear_status();
@@ -498,36 +498,36 @@ static int espi_send_command(const struct espi_cmd *cmd)
/* Dword 0 must be last as this write triggers the transaction */
espi_write32(ESPI_DN_TX_HDR0, cmd->hdr0.val);
- if (espi_wait_ready() == -1) {
+ if (espi_wait_ready() != CB_SUCCESS) {
espi_show_failure(cmd,
"Error: eSPI timed out waiting for command to complete", 0);
- return -1;
+ return CB_ERR;
}
- if (espi_poll_status(&status) == -1) {
+ if (espi_poll_status(&status) != CB_SUCCESS) {
espi_show_failure(cmd, "Error: eSPI poll status failed", 0);
- return -1;
+ return CB_ERR;
}
/* If command did not complete downstream, return error. */
if (!(status & ESPI_STATUS_DNCMD_COMPLETE)) {
espi_show_failure(cmd, "Error: eSPI downstream command completion failure",
status);
- return -1;
+ return CB_ERR;
}
if (status & ~(ESPI_STATUS_DNCMD_COMPLETE | cmd->expected_status_codes)) {
espi_show_failure(cmd, "Error: unexpected eSPI status register bits set",
status);
- return -1;
+ return CB_ERR;
}
espi_write32(ESPI_SLAVE0_INT_STS, status);
- return 0;
+ return CB_SUCCESS;
}
-static int espi_send_reset(void)
+static enum cb_err espi_send_reset(void)
{
struct espi_cmd cmd = {
.hdr0 = {
@@ -566,7 +566,7 @@ static int espi_send_reset(void)
return espi_send_command(&cmd);
}
-static int espi_send_pltrst(const struct espi_config *mb_cfg, bool assert)
+static enum cb_err espi_send_pltrst(const struct espi_config *mb_cfg, bool assert)
{
struct espi_cmd cmd = {
.hdr0 = {
@@ -582,7 +582,7 @@ static int espi_send_pltrst(const struct espi_config *mb_cfg, bool assert)
};
if (!mb_cfg->vw_ch_en)
- return 0;
+ return CB_SUCCESS;
return espi_send_command(&cmd);
}
@@ -594,7 +594,7 @@ static int espi_send_pltrst(const struct espi_config *mb_cfg, bool assert)
#define ESPI_CONFIGURATION_HDATA0(a) (((a) >> 8) & 0xff)
#define ESPI_CONFIGURATION_HDATA1(a) ((a) & 0xff)
-static int espi_get_configuration(uint16_t slave_reg_addr, uint32_t *config)
+static enum cb_err espi_get_configuration(uint16_t slave_reg_addr, uint32_t *config)
{
struct espi_cmd cmd = {
.hdr0 = {
@@ -607,8 +607,8 @@ static int espi_get_configuration(uint16_t slave_reg_addr, uint32_t *config)
*config = 0;
- if (espi_send_command(&cmd))
- return -1;
+ if (espi_send_command(&cmd) != CB_SUCCESS)
+ return CB_ERR;
*config = espi_read32(ESPI_DN_TX_HDR1);
@@ -616,10 +616,10 @@ static int espi_get_configuration(uint16_t slave_reg_addr, uint32_t *config)
printk(BIOS_DEBUG, "Get configuration for slave register(0x%x): 0x%x\n",
slave_reg_addr, *config);
- return 0;
+ return CB_SUCCESS;
}
-static int espi_set_configuration(uint16_t slave_reg_addr, uint32_t config)
+static enum cb_err espi_set_configuration(uint16_t slave_reg_addr, uint32_t config)
{
struct espi_cmd cmd = {
.hdr0 = {
@@ -636,13 +636,13 @@ static int espi_set_configuration(uint16_t slave_reg_addr, uint32_t config)
return espi_send_command(&cmd);
}
-static int espi_get_general_configuration(uint32_t *config)
+static enum cb_err espi_get_general_configuration(uint32_t *config)
{
- if (espi_get_configuration(ESPI_SLAVE_GENERAL_CFG, config) == -1)
- return -1;
+ if (espi_get_configuration(ESPI_SLAVE_GENERAL_CFG, config) != CB_SUCCESS)
+ return CB_ERR;
espi_show_slave_general_configuration(*config);
- return 0;
+ return CB_SUCCESS;
}
static void espi_set_io_mode_config(enum espi_io_mode mb_io_mode, uint32_t slave_caps,
@@ -737,7 +737,8 @@ static void espi_set_alert_pin_config(enum espi_alert_pin alert_pin, uint32_t sl
}
}
-static int espi_set_general_configuration(const struct espi_config *mb_cfg, uint32_t slave_caps)
+static enum cb_err espi_set_general_configuration(const struct espi_config *mb_cfg,
+ uint32_t slave_caps)
{
uint32_t slave_config = 0;
uint32_t ctrlr_config = 0;
@@ -757,14 +758,14 @@ static int espi_set_general_configuration(const struct espi_config *mb_cfg, uint
espi_show_slave_general_configuration(slave_config);
- if (espi_set_configuration(ESPI_SLAVE_GENERAL_CFG, slave_config) == -1)
- return -1;
+ if (espi_set_configuration(ESPI_SLAVE_GENERAL_CFG, slave_config) != CB_SUCCESS)
+ return CB_ERR;
espi_write32(ESPI_SLAVE0_CONFIG, ctrlr_config);
- return 0;
+ return CB_SUCCESS;
}
-static int espi_wait_channel_ready(uint16_t slave_reg_addr)
+static enum cb_err espi_wait_channel_ready(uint16_t slave_reg_addr)
{
struct stopwatch sw;
uint32_t config;
@@ -773,12 +774,12 @@ static int espi_wait_channel_ready(uint16_t slave_reg_addr)
do {
espi_get_configuration(slave_reg_addr, &config);
if (espi_slave_is_channel_ready(config))
- return 0;
+ return CB_SUCCESS;
} while (!stopwatch_expired(&sw));
printk(BIOS_ERR, "Error: Channel is not ready after %d usec (slave addr: 0x%x)\n",
ESPI_CH_READY_TIMEOUT_US, slave_reg_addr);
- return -1;
+ return CB_ERR;
}
@@ -791,23 +792,24 @@ static void espi_enable_ctrlr_channel(uint32_t channel_en)
espi_write32(ESPI_SLAVE0_CONFIG, reg);
}
-static int espi_set_channel_configuration(uint32_t slave_config, uint32_t slave_reg_addr,
- uint32_t ctrlr_enable)
+static enum cb_err espi_set_channel_configuration(uint32_t slave_config,
+ uint32_t slave_reg_addr,
+ uint32_t ctrlr_enable)
{
- if (espi_set_configuration(slave_reg_addr, slave_config) == -1)
- return -1;
+ if (espi_set_configuration(slave_reg_addr, slave_config) != CB_SUCCESS)
+ return CB_ERR;
if (!(slave_config & ESPI_SLAVE_CHANNEL_ENABLE))
- return 0;
+ return CB_SUCCESS;
- if (espi_wait_channel_ready(slave_reg_addr) == -1)
- return -1;
+ if (espi_wait_channel_ready(slave_reg_addr) != CB_SUCCESS)
+ return CB_ERR;
espi_enable_ctrlr_channel(ctrlr_enable);
- return 0;
+ return CB_SUCCESS;
}
-static int espi_setup_vw_channel(const struct espi_config *mb_cfg, uint32_t slave_caps)
+static enum cb_err espi_setup_vw_channel(const struct espi_config *mb_cfg, uint32_t slave_caps)
{
uint32_t slave_vw_caps;
uint32_t ctrlr_vw_caps;
@@ -817,15 +819,15 @@ static int espi_setup_vw_channel(const struct espi_config *mb_cfg, uint32_t slav
uint32_t slave_config;
if (!mb_cfg->vw_ch_en)
- return 0;
+ return CB_SUCCESS;
if (!espi_slave_supports_vw_channel(slave_caps)) {
printk(BIOS_ERR, "Error: eSPI slave doesn't support VW channel!\n");
- return -1;
+ return CB_ERR;
}
- if (espi_get_configuration(ESPI_SLAVE_VW_CFG, &slave_vw_caps) == -1)
- return -1;
+ if (espi_get_configuration(ESPI_SLAVE_VW_CFG, &slave_vw_caps) != CB_SUCCESS)
+ return CB_ERR;
ctrlr_vw_caps = espi_read32(ESPI_MASTER_CAP);
ctrlr_vw_count_supp = (ctrlr_vw_caps & ESPI_VW_MAX_SIZE_MASK) >> ESPI_VW_MAX_SIZE_SHIFT;
@@ -837,15 +839,16 @@ static int espi_setup_vw_channel(const struct espi_config *mb_cfg, uint32_t slav
return espi_set_channel_configuration(slave_config, ESPI_SLAVE_VW_CFG, ESPI_VW_CH_EN);
}
-static int espi_setup_periph_channel(const struct espi_config *mb_cfg, uint32_t slave_caps)
+static enum cb_err espi_setup_periph_channel(const struct espi_config *mb_cfg,
+ uint32_t slave_caps)
{
uint32_t slave_config;
/* Peripheral channel requires BME bit to be set when enabling the channel. */
const uint32_t slave_en_mask =
ESPI_SLAVE_CHANNEL_ENABLE | ESPI_SLAVE_PERIPH_BUS_MASTER_ENABLE;
- if (espi_get_configuration(ESPI_SLAVE_PERIPH_CFG, &slave_config) == -1)
- return -1;
+ if (espi_get_configuration(ESPI_SLAVE_PERIPH_CFG, &slave_config) != CB_SUCCESS)
+ return CB_ERR;
/*
* Peripheral channel is the only one which is enabled on reset. So, if the mainboard
@@ -855,7 +858,7 @@ static int espi_setup_periph_channel(const struct espi_config *mb_cfg, uint32_t
if (mb_cfg->periph_ch_en) {
if (!espi_slave_supports_periph_channel(slave_caps)) {
printk(BIOS_ERR, "Error: eSPI slave doesn't support periph channel!\n");
- return -1;
+ return CB_ERR;
}
slave_config |= slave_en_mask;
} else {
@@ -868,20 +871,20 @@ static int espi_setup_periph_channel(const struct espi_config *mb_cfg, uint32_t
ESPI_PERIPH_CH_EN);
}
-static int espi_setup_oob_channel(const struct espi_config *mb_cfg, uint32_t slave_caps)
+static enum cb_err espi_setup_oob_channel(const struct espi_config *mb_cfg, uint32_t slave_caps)
{
uint32_t slave_config;
if (!mb_cfg->oob_ch_en)
- return 0;
+ return CB_SUCCESS;
if (!espi_slave_supports_oob_channel(slave_caps)) {
printk(BIOS_ERR, "Error: eSPI slave doesn't support OOB channel!\n");
- return -1;
+ return CB_ERR;
}
- if (espi_get_configuration(ESPI_SLAVE_OOB_CFG, &slave_config) == -1)
- return -1;
+ if (espi_get_configuration(ESPI_SLAVE_OOB_CFG, &slave_config) != CB_SUCCESS)
+ return CB_ERR;
slave_config |= ESPI_SLAVE_CHANNEL_ENABLE;
@@ -889,20 +892,21 @@ static int espi_setup_oob_channel(const struct espi_config *mb_cfg, uint32_t sla
ESPI_OOB_CH_EN);
}
-static int espi_setup_flash_channel(const struct espi_config *mb_cfg, uint32_t slave_caps)
+static enum cb_err espi_setup_flash_channel(const struct espi_config *mb_cfg,
+ uint32_t slave_caps)
{
uint32_t slave_config;
if (!mb_cfg->flash_ch_en)
- return 0;
+ return CB_SUCCESS;
if (!espi_slave_supports_flash_channel(slave_caps)) {
printk(BIOS_ERR, "Error: eSPI slave doesn't support flash channel!\n");
- return -1;
+ return CB_ERR;
}
- if (espi_get_configuration(ESPI_SLAVE_FLASH_CFG, &slave_config) == -1)
- return -1;
+ if (espi_get_configuration(ESPI_SLAVE_FLASH_CFG, &slave_config) != CB_SUCCESS)
+ return CB_ERR;
slave_config |= ESPI_SLAVE_CHANNEL_ENABLE;
@@ -968,7 +972,7 @@ int espi_setup(void)
* Send in-band reset
* The resets affects both host and slave devices, so set initial config again.
*/
- if (espi_send_reset() == -1) {
+ if (espi_send_reset() != CB_SUCCESS) {
printk(BIOS_ERR, "Error: In-band reset failed!\n");
return -1;
}
@@ -978,7 +982,7 @@ int espi_setup(void)
* Boot sequence: Step 3
* Get configuration of slave device.
*/
- if (espi_get_general_configuration(&slave_caps) == -1) {
+ if (espi_get_general_configuration(&slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Slave GET_CONFIGURATION failed!\n");
return -1;
}
@@ -988,7 +992,7 @@ int espi_setup(void)
* Step 4: Write slave device general config
* Step 5: Set host slave config
*/
- if (espi_set_general_configuration(cfg, slave_caps) == -1) {
+ if (espi_set_general_configuration(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Slave SET_CONFIGURATION failed!\n");
return -1;
}
@@ -1004,34 +1008,34 @@ int espi_setup(void)
* Channel setup
*/
/* Set up VW first so we can deassert PLTRST#. */
- if (espi_setup_vw_channel(cfg, slave_caps) == -1) {
+ if (espi_setup_vw_channel(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Setup VW channel failed!\n");
return -1;
}
/* Assert PLTRST# if VW channel is enabled by mainboard. */
- if (espi_send_pltrst(cfg, true) == -1) {
+ if (espi_send_pltrst(cfg, true) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: PLTRST# assertion failed!\n");
return -1;
}
/* De-assert PLTRST# if VW channel is enabled by mainboard. */
- if (espi_send_pltrst(cfg, false) == -1) {
+ if (espi_send_pltrst(cfg, false) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: PLTRST# deassertion failed!\n");
return -1;
}
- if (espi_setup_periph_channel(cfg, slave_caps) == -1) {
+ if (espi_setup_periph_channel(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Setup Periph channel failed!\n");
return -1;
}
- if (espi_setup_oob_channel(cfg, slave_caps) == -1) {
+ if (espi_setup_oob_channel(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Setup OOB channel failed!\n");
return -1;
}
- if (espi_setup_flash_channel(cfg, slave_caps) == -1) {
+ if (espi_setup_flash_channel(cfg, slave_caps) != CB_SUCCESS) {
printk(BIOS_ERR, "Error: Setup Flash channel failed!\n");
return -1;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 05:11:07 +0000