diff options
| -rw-r--r-- | src/mainboard/amd/db800/Config.lb | 4 | ||||
| -rw-r--r-- | src/mainboard/digitallogic/msm800sev/Config.lb | 4 | ||||
| -rw-r--r-- | src/mainboard/iei/pcisa-lx-800-r10/Config.lb | 4 | ||||
| -rw-r--r-- | src/mainboard/pcengines/alix1c/Config.lb | 4 |
4 files changed, 8 insertions, 8 deletions
diff --git a/src/mainboard/amd/db800/Config.lb b/src/mainboard/amd/db800/Config.lb index bdc109369f..2c0cce3e1e 100644 --- a/src/mainboard/amd/db800/Config.lb +++ b/src/mainboard/amd/db800/Config.lb @@ -127,8 +127,8 @@ chip northbridge/amd/lx # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK # SIRQ Mode = Active(Quiet) mode. Save power.... # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000010da" - register "lpc_serirq_polarity" = "0x0000EF25" + register "lpc_serirq_enable" = "0x0000105a" + register "lpc_serirq_polarity" = "0x0000EFA5" register "lpc_serirq_mode" = "1" register "enable_gpio_int_route" = "0x0D0C0700" register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash diff --git a/src/mainboard/digitallogic/msm800sev/Config.lb b/src/mainboard/digitallogic/msm800sev/Config.lb index 84db58bb42..eceee5bf49 100644 --- a/src/mainboard/digitallogic/msm800sev/Config.lb +++ b/src/mainboard/digitallogic/msm800sev/Config.lb @@ -128,9 +128,9 @@ chip northbridge/amd/lx # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK # How to get these? Boot linux and do this: # rdmsr 0x51400025 - register "lpc_serirq_enable" = "0x000010da" + register "lpc_serirq_enable" = "0x0000105a" # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits - register "lpc_serirq_polarity" = "0x0000EF25" + register "lpc_serirq_polarity" = "0x0000EFA5" # mode is high 10 bits (determined from code) register "lpc_serirq_mode" = "1" # Don't yet know how to find this. diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Config.lb b/src/mainboard/iei/pcisa-lx-800-r10/Config.lb index 7c89aaffca..87aa03d741 100644 --- a/src/mainboard/iei/pcisa-lx-800-r10/Config.lb +++ b/src/mainboard/iei/pcisa-lx-800-r10/Config.lb @@ -78,8 +78,8 @@ chip northbridge/amd/lx # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK # SIRQ Mode = Active(Quiet) mode. Save power.... # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000010da" - register "lpc_serirq_polarity" = "0x0000EF25" + register "lpc_serirq_enable" = "0x0000105a" + register "lpc_serirq_polarity" = "0x0000EFA5" register "lpc_serirq_mode" = "1" register "enable_gpio_int_route" = "0x0D0C0700" register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash diff --git a/src/mainboard/pcengines/alix1c/Config.lb b/src/mainboard/pcengines/alix1c/Config.lb index c78587851b..73a1875280 100644 --- a/src/mainboard/pcengines/alix1c/Config.lb +++ b/src/mainboard/pcengines/alix1c/Config.lb @@ -148,9 +148,9 @@ chip northbridge/amd/lx # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK # How to get these? Boot linux and do this: # rdmsr 0x51400025 - register "lpc_serirq_enable" = "0x000010da" + register "lpc_serirq_enable" = "0x0000105a" # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits - register "lpc_serirq_polarity" = "0x0000EF25" + register "lpc_serirq_polarity" = "0x0000EFA5" # mode is high 10 bits (determined from code) register "lpc_serirq_mode" = "1" # Don't yet know how to find this. |