fixes for tyan

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 41 insertions, 25 deletions

diff --git a/targets/tyan/s2880/Config.lb b/targets/tyan/s2880/Config.lb
index da6858e582..2ca6d643fe 100644
--- a/targets/tyan/s2880/Config.lb
+++ b/targets/tyan/s2880/Config.lb
@@ -65,6 +65,7 @@ uses HAVE_HARD_RESET
 #
 #uses CONFIG_LSI_SCSI_FW_FIXUP
 
+
 option HAVE_HARD_RESET=1
 
 option HAVE_OPTION_TABLE=1
@@ -170,7 +171,7 @@ option TTYS0_BAUD=115200
 ## Request this level of debugging output
 option DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=9
+option MAXIMUM_CONSOLE_LOGLEVEL=8
 
 option DEBUG=1
 
@@ -180,14 +181,14 @@ option DEBUG=1
 option _RAMBASE=0x004000
 
 ##
-## Use a 128K stack
+## Use a 128K stack 
 ##
 option STACK_SIZE=0x4000
 
 ##
-## Use a 256K heap
+## Use a 256K heap + 64
 ##
-option HEAP_SIZE=0x8000
+option HEAP_SIZE=0xa000
 
 #
 ###
@@ -233,7 +234,7 @@ romimage "fallback"
 	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
 
 	mainboard tyan/s2880
-	payload ../../tg3.zelf
+	payload ../../tg3--ide_disk.zelf
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2881/Config.lb b/targets/tyan/s2881/Config.lb
index 8d68d066f1..be6e6d85d0 100644
--- a/targets/tyan/s2881/Config.lb
+++ b/targets/tyan/s2881/Config.lb
@@ -170,7 +170,7 @@ option TTYS0_BAUD=115200
 ## Request this level of debugging output
 option DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=9
+option MAXIMUM_CONSOLE_LOGLEVEL=8
 
 option DEBUG=1
 
@@ -180,14 +180,14 @@ option DEBUG=1
 option _RAMBASE=0x004000
 
 ##
-## Use a 128K stack
+## Use a 128K stack 
 ##
 option STACK_SIZE=0x4000
 
 ##
-## Use a 256K heap
+## Use a 256K heap + 64
 ##
-option HEAP_SIZE=0x8000
+option HEAP_SIZE=0xa000
 
 #
 ###
@@ -233,7 +233,7 @@ romimage "fallback"
 	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
 
 	mainboard tyan/s2881
-	payload ../../tg3.zelf
+	payload ../../tg3--ide_disk.zelf
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2882/Config.lb b/targets/tyan/s2882/Config.lb
index 73976be4fe..258e7f1158 100644
--- a/targets/tyan/s2882/Config.lb
+++ b/targets/tyan/s2882/Config.lb
@@ -44,6 +44,9 @@ uses CONFIG_CHIP_CONFIGURE
  
 uses CONFIG_CONSOLE_SERIAL8250
 uses TTYS0_BAUD
+#SMDC Support
+#uses CONFIG_CONSOLE_SERIAL8250_2
+#uses TTYS1_BAUD
 uses DEFAULT_CONSOLE_LOGLEVEL
 uses MAXIMUM_CONSOLE_LOGLEVEL
 uses DEBUG
@@ -76,7 +79,7 @@ option k7=1
 option k8=1
 option ROM_SIZE=524288
 
-option HAVE_HARD_RESET=0
+option HAVE_HARD_RESET=1
 
 #option CONFIG_VGABIOS=1
 #option CONFIG_REALMODE_IDT=1
@@ -84,7 +87,6 @@ option HAVE_HARD_RESET=0
 #option VGABIOS_START=0xfff8c000
 #option SCSIFW_START=0xfff80000
 
-
 option HAVE_FALLBACK_BOOT=1
   
 # use the new chip configure code.
@@ -153,6 +155,11 @@ option CONFIG_COMPRESS=1
 option CONFIG_CONSOLE_SERIAL8250=1
 option TTYS0_BAUD=115200
 
+#SMDC support
+#option CONFIG_CONSOLE_SERIAL8250_2=1
+#option TTYS1_BAUD=19200
+
+
 ##
 ### Select the linuxBIOS loglevel
 ##
@@ -169,7 +176,7 @@ option TTYS0_BAUD=115200
 ## Request this level of debugging output
 option DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=9
+option MAXIMUM_CONSOLE_LOGLEVEL=8
 
 option DEBUG=1
 
@@ -179,14 +186,14 @@ option DEBUG=1
 option _RAMBASE=0x004000
 
 ##
-## Use a 128K stack
+## Use a 128K stack  
 ##
 option STACK_SIZE=0x4000
 
 ##
-## Use a 256K heap
+## Use a 256K heap + 128
 ##
-option HEAP_SIZE=0x8000
+option HEAP_SIZE=0xa000
 
 #
 ###
@@ -215,7 +222,9 @@ romimage "normal"
 	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
 
 	mainboard tyan/s2882
-	payload ../../tg3--ide_disk.zelf 
+	payload ../../tg3--ide_disk.zelf
+#	SMDC support
+#	payload ../../tg3--ide_disk_com1_2.zelf 
 end
 
 romimage "fallback" 
@@ -232,7 +241,9 @@ romimage "fallback"
 	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
 
 	mainboard tyan/s2882
-	payload ../../tg3.zelf
+	payload ../../tg3--ide_disk.zelf
+#SMDC support
+#	payload ../../tg3--ide_disk_com1_2.zelf
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2885/Config.lb b/targets/tyan/s2885/Config.lb
index 67828b9126..8cb8f70bee 100644
--- a/targets/tyan/s2885/Config.lb
+++ b/targets/tyan/s2885/Config.lb
@@ -90,7 +90,7 @@ option CONFIG_CHIP_CONFIGURE=1
 #option CONFIG_LSI_SCSI_FW_FIXUP=1
 
 
-option HAVE_HARD_RESET=0
+option HAVE_HARD_RESET=1
 
 ###
 ### Build code to export a programmable irq routing table
@@ -134,7 +134,8 @@ option MAINBOARD_VENDOR="Tyan"
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
 ###
 #option FALLBACK_SIZE=524288
-option FALLBACK_SIZE=98304
+#option FALLBACK_SIZE=98304
+option FALLBACK_SIZE=131072
 
 ## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
 option ROM_IMAGE_SIZE=65536
@@ -168,7 +169,7 @@ option TTYS0_BAUD=115200
 ## Request this level of debugging output
 option DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=9
+option MAXIMUM_CONSOLE_LOGLEVEL=8
 
 option DEBUG=1
 
@@ -183,9 +184,9 @@ option _RAMBASE=0x004000
 option STACK_SIZE=0x4000
 
 ##
-## Use a 256K heap
+## Use a 256K heap + 64
 ##
-option HEAP_SIZE=0x8000
+option HEAP_SIZE=0xa000
 
 #
 ###
@@ -232,6 +233,7 @@ romimage "fallback"
 
 	mainboard tyan/s2885
 	payload ../../tg3--ide_disk.zelf
+#	payload ../../filo.elf.d
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s4880/Config.lb b/targets/tyan/s4880/Config.lb
index 5f61a362d4..6cca9e6fa6 100644
--- a/targets/tyan/s4880/Config.lb
+++ b/targets/tyan/s4880/Config.lb
@@ -136,7 +136,8 @@ option MAINBOARD_VENDOR="Tyan"
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
 ###
 #option FALLBACK_SIZE=524288
-option FALLBACK_SIZE=98304
+#option FALLBACK_SIZE=98304
+option FALLBACK_SIZE=131072
 
 ## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
 option ROM_IMAGE_SIZE=65536
@@ -233,7 +234,8 @@ romimage "fallback"
 	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
 
 	mainboard tyan/s4880
-	payload ../../tg3.zelf
+#	payload ../../tg3--ide_disk.zelf
+	payload ../../filo.elf.d
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"