Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-54

Creator:  Ronald G. Minnich <rminnich@lanl.gov>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1970 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

7 files changed, 280 insertions, 31 deletions

diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c
index 08f972e612..00bc559771 100644
--- a/src/boot/hardwaremain.c
+++ b/src/boot/hardwaremain.c
@@ -56,6 +56,7 @@ void hardwaremain(int boot_complete)
 	console_init();
 	
 	post_code(0x39);
+
 	printk_notice("LinuxBIOS-%s%s %s %s...\n", 
 		      linuxbios_version, linuxbios_extra_version, linuxbios_build,
 		      (boot_complete)?"rebooting":"booting");
diff --git a/src/cpu/amd/sc520/Config.lb b/src/cpu/amd/sc520/Config.lb
index b61acbc1ab..10bb9965a7 100644
--- a/src/cpu/amd/sc520/Config.lb
+++ b/src/cpu/amd/sc520/Config.lb
@@ -1,7 +1,3 @@
-uses CONFIG_CHIP_NAME
-
-if CONFIG_CHIP_NAME
-	config chip.h
-end
+config chip.h
 object sc520.o
 
diff --git a/src/cpu/amd/sc520/raminit.c b/src/cpu/amd/sc520/raminit.c
index aecf2b7723..273e0a47fc 100644
--- a/src/cpu/amd/sc520/raminit.c
+++ b/src/cpu/amd/sc520/raminit.c
@@ -214,13 +214,13 @@ setupsc520(void){
 
 	/* the 0x80 led should now be working*/
 	outb(0xaa, 0x80);
-
+#if 0
 	/* wtf are 680 leds ... */
 	par = (unsigned long *) 0xfffef0c4;
 	*par = 0x28000680;
 	/* well? */
 	outb(0x55, 0x80);
-
+#endif
 
 /*; set the uart baud rate clocks to the normal 1.8432 MHz.*/
 	cp = (unsigned char *)0xfffefcc0;
@@ -232,7 +232,7 @@ setupsc520(void){
 	cp = (unsigned char *)0x0fffefd20;
 	*cp = 0x01;
 	
-	cp = (unsigned char *)0x0fffefd28;
+x	cp = (unsigned char *)0x0fffefd28;
 	*cp = 0x0c;
 	
 	cp = (unsigned char *)0x0fffefd29;
@@ -258,12 +258,12 @@ setupsc520(void){
 	outl(0xcfc, 0x2);			/*set the memory access enable bit*/
 	OUTC(0x0fffef072, 1);		/* enable req bits in SYSARBMENB */
 #endif
+	/* set up the PAR registers as they are on the MSM586SEG */
+	par = (unsigned long *) 0xfffef088;
 
 #if 0
 
 
-	/* set up the PAR registers as they are on the MSM586SEG */
-	par = (unsigned long *) 0xfffef088;
 	*par++ = 0x607c00a0; /*PAR0: PCI:Base 0xa0000; size 0x1f000:*/
 	*par++ = 0x480400d8; /*PAR1: GP BUS MEM:CS2:Base 0xd8, size 0x4:*/
 	*par++ = 0x340100ea; /*PAR2: GP BUS IO:CS5:Base 0xea, size 0x1:*/
@@ -279,9 +279,12 @@ setupsc520(void){
 	*par++ = 0x341f03e0; /*PAR12: GP BUS IO:CS5:Base 0x3e0, size 0x1f:*/
 	*par++ = 0xe41c00c0; /*PAR13: SDRAM:code:cache:nowrite:Base 0xc0000, size 0x7000:*/
 	*par++ = 0x545c00c8; /*PAR14: GP BUS MEM:CS5:Base 0xc8, size 0x5c:*/
-//	*par++ = 0x8a020200; /*PAR15: BOOTCS:code:nocache:write:Base 0x2000000, size 0x80000:*/
-
+#else
+	par += 15;
 #endif
+	*par++ = 0x8a020200; /*PAR15: BOOTCS:code:nocache:write:Base 0x2000000, size 0x80000:*/
+
+
 }
 	
 
diff --git a/src/cpu/amd/sc520/sc520.c b/src/cpu/amd/sc520/sc520.c
index a8e5b0baa2..7776e82cc8 100644
--- a/src/cpu/amd/sc520/sc520.c
+++ b/src/cpu/amd/sc520/sc520.c
@@ -1,7 +1,198 @@
+#include <console/console.h>
+#include <arch/io.h>
+#include <stdint.h>
 #include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/hypertransport.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bitops.h>
 #include "chip.h"
 
+/*
+ * set up basic things ... PAR should NOT go here, as it might change with the mainboard. 
+ */
+static void cpu_init(device_t dev) 
+{
+  unsigned long *l = (unsigned long *) 0xfffef088;
+  int i;
+  for(i = 0; i < 16; i++, l++)
+    printk_err("Par%d: 0x%lx\n", i, *l);
+
+  printk_spew("SC520 random fixup ...\n");
+}
+
+
+
+static struct device_operations cpu_operations = {
+	.read_resources   = pci_dev_read_resources,
+	.set_resources    = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.init             = cpu_init,
+	.enable           = 0,
+	.ops_pci          = 0,
+};
+
+static struct pci_driver cpu_driver __pci_driver = {
+	.ops = &cpu_operations,
+	.vendor = PCI_VENDOR_ID_AMD,
+	.device = 0x3000
+};
+
+
+
+#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
+
+static void pci_domain_read_resources(device_t dev)
+{
+        struct resource *resource;
+  printk_spew("%s\n", __FUNCTION__);
+        /* Initialize the system wide io space constraints */
+        resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0));
+        resource->limit = 0xffffUL;
+        resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+        /* Initialize the system wide memory resources constraints */
+        resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0));
+        resource->limit = 0xffffffffULL;
+        resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+}
+
+static void ram_resource(device_t dev, unsigned long index,
+        unsigned long basek, unsigned long sizek)
+{
+        struct resource *resource;
+  printk_spew("%s sizek 0x%x\n", __FUNCTION__, sizek);
+        if (!sizek) {
+                return;
+        }
+        resource = new_resource(dev, index);
+        resource->base  = ((resource_t)basek) << 10;
+        resource->size  = ((resource_t)sizek) << 10;
+        resource->flags =  IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
+                IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+}
+
+static void tolm_test(void *gp, struct device *dev, struct resource *new)
+{
+	struct resource **best_p = gp;
+	struct resource *best;
+	best = *best_p;
+	if (!best || (best->base > new->base)) {
+		best = new;
+	}
+	*best_p = best;
+}
+
+static uint32_t find_pci_tolm(struct bus *bus)
+{
+	struct resource *min;
+	uint32_t tolm;
+  printk_spew("%s\n", __FUNCTION__);
+	min = 0;
+	search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min);
+	tolm = 0xffffffffUL;
+	if (min && tolm > min->base) {
+		tolm = min->base;
+	}
+  printk_spew("%s returns 0x%x\n", __FUNCTION__, tolm);
+	return tolm;
+}
+
+static void pci_domain_set_resources(device_t dev)
+{
+	device_t mc_dev;
+        uint32_t pci_tolm;
+  printk_spew("%s\n", __FUNCTION__);
+        pci_tolm = find_pci_tolm(&dev->link[0]);
+	mc_dev = dev->link[0].children;
+	if (mc_dev) {
+		unsigned long tomk, tolmk;
+		//		unsigned char rambits;
+		// int i;
+		int idx;
+#if 0
+		for(rambits = 0, i = 0; i < sizeof(ramregs)/sizeof(ramregs[0]); i++) {
+			unsigned char reg;
+			reg = pci_read_config8(mc_dev, ramregs[i]);
+			/* these are ENDING addresses, not sizes. 
+			 * if there is memory in this slot, then reg will be > rambits.
+			 * So we just take the max, that gives us total. 
+			 * We take the highest one to cover for once and future linuxbios
+			 * bugs. We warn about bugs.
+			 */
+			if (reg > rambits)
+				rambits = reg;
+			if (reg < rambits)
+				printk_err("ERROR! register 0x%x is not set!\n", 
+					ramregs[i]);
+		}
+		printk_debug("I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024);
+		tomk = rambits*8*1024;
+#endif
+		tomk = 32 * 1024;
+		/* Compute the top of Low memory */
+		tolmk = pci_tolm >> 10;
+		if (tolmk >= tomk) {
+			/* The PCI hole does does not overlap the memory.
+			 */
+			tolmk = tomk;
+		}
+		/* Report the memory regions */
+		idx = 10;
+		ram_resource(dev, idx++, 0, tolmk);
+	}
+	assign_resources(&dev->link[0]);
+}
+
+static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
+{
+  printk_spew("%s\n", __FUNCTION__);
+        max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
+        return max;
+}
+
+static struct device_operations pci_domain_ops = {
+        .read_resources   = pci_domain_read_resources,
+        .set_resources    = pci_domain_set_resources,
+        .enable_resources = enable_childrens_resources,
+        .init             = 0,
+        .scan_bus         = pci_domain_scan_bus,
+};  
+
+static void cpu_bus_init(device_t dev)
+{
+  printk_spew("cpu_bus_init\n");
+}
+
+static void cpu_bus_noop(device_t dev)
+{
+}
+
+static struct device_operations cpu_bus_ops = {
+        .read_resources   = cpu_bus_noop,
+        .set_resources    = cpu_bus_noop,
+        .enable_resources = cpu_bus_noop,
+        .init             = cpu_bus_init,
+        .scan_bus         = 0,
+};
+
+static void enable_dev(struct device *dev)
+{
+  printk_spew("%s\n", __FUNCTION__);
+        /* Set the operations if it is a special bus type */
+        if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
+                dev->ops = &pci_domain_ops;
+		pci_set_method(dev);
+        }
+        else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) {
+                dev->ops = &cpu_bus_ops;
+        }
+}
+
 
 struct chip_operations cpu_amd_sc520_ops = {
 	CHIP_NAME("AMD SC520")
+	.enable_dev = enable_dev, 
 };
diff --git a/src/mainboard/digitallogic/msm586seg/Config.lb b/src/mainboard/digitallogic/msm586seg/Config.lb
index 9f5bb16f1f..04cc7f2d7b 100644
--- a/src/mainboard/digitallogic/msm586seg/Config.lb
+++ b/src/mainboard/digitallogic/msm586seg/Config.lb
@@ -4,7 +4,6 @@
 ##
 default ROM_SIZE = 512 * 1024 
 default FALLBACK_SIZE = 0x10000
-
 if USE_FALLBACK_IMAGE
 	default ROM_SECTION_SIZE   = 64 * 1024 # FALLBACK_SIZE
 	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
diff --git a/src/mainboard/digitallogic/msm586seg/Options.lb b/src/mainboard/digitallogic/msm586seg/Options.lb
index 91e8ef0a13..610ef9a791 100644
--- a/src/mainboard/digitallogic/msm586seg/Options.lb
+++ b/src/mainboard/digitallogic/msm586seg/Options.lb
@@ -5,6 +5,7 @@ uses HAVE_FALLBACK_BOOT
 uses HAVE_HARD_RESET
 uses HAVE_OPTION_TABLE
 uses USE_OPTION_TABLE
+uses CONFIG_COMPRESS
 uses CONFIG_ROM_STREAM
 uses IRQ_SLOT_COUNT
 uses MAINBOARD
@@ -32,8 +33,13 @@ uses CC
 uses HOSTCC
 uses OBJCOPY
 
+uses CONFIG_CONSOLE_SERIAL8250
+
+
 uses DEFAULT_CONSOLE_LOGLEVEL
 uses MAXIMUM_CONSOLE_LOGLEVEL
+
+default CONFIG_CONSOLE_SERIAL8250=1
 default DEFAULT_CONSOLE_LOGLEVEL=9
 default MAXIMUM_CONSOLE_LOGLEVEL=9
 ## ROM_SIZE is the size of boot ROM that this board will use.
diff --git a/src/mainboard/digitallogic/msm586seg/auto.c b/src/mainboard/digitallogic/msm586seg/auto.c
index 7aba46e797..b9f490a4f8 100644
--- a/src/mainboard/digitallogic/msm586seg/auto.c
+++ b/src/mainboard/digitallogic/msm586seg/auto.c
@@ -10,11 +10,14 @@
 #include "pc80/serial.c"
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 //#include "lib/delay.c"
 #include "cpu/amd/sc520/raminit.c"
 
+typedef void (*lj)(void);
+
+
+
 struct mem_controller {
 	int i;
 };
@@ -45,6 +48,23 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 //#include "sdram/generic_sdram.c"
 
+static inline void dumpmem(void){
+  int i, j;
+  unsigned char *l;
+  unsigned char c;
+
+  for(i = 0x4000; i < 0x5000; i += 16) {
+    print_err_hex32(i); print_err(":");
+    for(j = 0; j < 16; j++) {
+      l = (unsigned char *)i + j;
+      c = *l;
+      print_err_hex8(c);
+      print_err(" ");
+    }
+    print_err("\r\n");
+  }
+}
+
 static void main(unsigned long bist)
 {
     volatile int i;
@@ -61,6 +81,8 @@ static void main(unsigned long bist)
 		print_err("HI THERE!\r\n");
 		//			sizemem();
 	staticmem();
+	print_err("c60 is "); print_err_hex16(*(unsigned short *)0xfffefc60); 
+	print_err("\n");
 			
 	//			while(1)
 	print_err("STATIC MEM DONE\r\n");
@@ -69,36 +91,67 @@ static void main(unsigned long bist)
 
 
 #if 0
-	else {
-		        /* clear memory 1meg */
+
+	/* clear memory 1meg */
         __asm__ volatile(
-                "1: \n\t"
-                "movl %0, %%fs:(%1)\n\t"
-                "addl $4,%1\n\t"
-                "subl $4,%2\n\t"
-                "jnz 1b\n\t"
-                :
-                : "a" (0), "D" (0), "c" (1024*1024)
-                ); 
+			 "1: \n\t"
+			 "movl %0, %%fs:(%1)\n\t"
+			 "addl $4,%1\n\t"
+			 "subl $4,%2\n\t"
+			 "jnz 1b\n\t"
+			 :
+			 : "a" (0), "D" (0), "c" (1024*1024)
+			 ); 
+	
 	
-	}
 #endif
-
+	
 #if 0
 	dump_pci_devices();
 #endif
 #if 0
 	dump_pci_device(PCI_DEV(0, 0, 0));
 #endif
-
+	
 #if 0
 	print_err("RAM CHECK!\r\n");
 	// Check 16MB of memory @ 0
 	ram_check(0x00000000, 0x01000000);
 #endif
-#if 1
-	print_err("RAM CHECK!\r\n");
-	// Check 1MB of memory @ 0
-	ram_check(0x00000000, 0x0100000);
+#if 0
+	print_err("RAM CHECK for 32 MB!\r\n");
+	// Check 32MB of memory @ 0
+	ram_check(0x00000000, 0x02000000);
+#endif
+#if 0
+	{
+	  volatile unsigned char *src = (unsigned char *) 0x2000000 + 0x70000;
+	  volatile unsigned char *dst = (unsigned char *) 0x4000; 
+	  for(i = 0; i < 0x10000; i++) {
+	    /*
+	      print_err("Set dst "); print_err_hex32((unsigned long) dst); 
+	      print_err(" to "); print_err_hex32(*src); print_err("\r\n");
+	    */
+	    *dst = *src;
+	    //print_err(" dst is now "); print_err_hex32(*dst); print_err("\r\n");
+	    dst++, src++;
+	    outb((unsigned char)i, 0x80);
+	  }
+	}
+	dumpmem();
+	outb(0, 0x80);
+	print_err("loop forever\r\n");
+	outb(0xdd, 0x80);
+        __asm__ volatile(
+			 "movl %0, %%edi\n\t"
+			 "jmp *%%edi\n\t"
+			 :
+			 : "a" (0x4000)
+			 ); 
+	
+	print_err("FUCK\r\n");
+	
+	while(1);
 #endif
 }
+