commit initial qemu support (see http://fabrice.bellard.free.fr/qemu/)

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1610 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

7 files changed, 497 insertions, 0 deletions

diff --git a/src/mainboard/emulation/qemu-i386/Config.lb b/src/mainboard/emulation/qemu-i386/Config.lb
new file mode 100644
index 0000000000..5c3100b601
--- /dev/null
+++ b/src/mainboard/emulation/qemu-i386/Config.lb
@@ -0,0 +1,216 @@
+# This is a dummy linuxbios for use in bochs or qemu
+#
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses HAVE_OPTION_TABLE
+uses USE_OPTION_TABLE
+uses CONFIG_ROM_STREAM
+uses MAINBOARD
+uses ARCH
+uses FALLBACK_SIZE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses HAVE_MP_TABLE
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+default ROM_SIZE  = 256*1024
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## no MP table
+##
+default HAVE_MP_TABLE=0
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=0
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=1
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+#default ROM_IMAGE_SIZE = 65536
+default ROM_IMAGE_SIZE = 32768
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+default USE_OPTION_TABLE = 0
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+#if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+#else
+#	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
+#	default ROM_SECTION_OFFSET = 0
+#end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default CONFIG_ROM_STREAM     = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=0x8000
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+cpu p5 "qemu_cpu" end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+	depends "$(MAINBOARD)/failover.c" 
+	action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+end
+
+makerule ./failover.inc
+	depends "./failover.E ./romcc"
+	action "./romcc -O -mcpu=i386 -o failover.inc --label-prefix=failover ./failover.E"
+end
+
+makerule ./auto.E 
+	depends	"$(MAINBOARD)/auto.c" 
+	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+end
+makerule ./auto.inc 
+	depends "./auto.E ./romcc"
+	action	"./romcc   -O -mcpu=i386 ./auto.E "
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/i386/entry16.inc
+mainboardinit cpu/i386/entry32.inc
+ldscript /cpu/i386/entry16.lds
+ldscript /cpu/i386/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE 
+	mainboardinit cpu/i386/reset16.inc 
+	ldscript /cpu/i386/reset16.lds 
+else
+	mainboardinit cpu/i386/reset32.inc 
+	ldscript /cpu/i386/reset32.lds 
+end
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+##
+## Setup our mtrrs
+##
+# mainboardinit cpu/p6/earlymtrr.inc
+
+###
+### This is the early phase of linuxBIOS startup 
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+#if USE_FALLBACK_IMAGE
+ldscript /arch/i386/lib/failover.lds 
+mainboardinit ./failover.inc
+#end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit ./auto.inc
+
+##
+## Include the secondary Configuration files 
+##
+dir /pc80
+dir /drivers/emulation/qemu
+config chip.h
+
+northbridge emulation/qemu-i386 "nb_qemu"
+
+end
+
+##
+## Include the old serial code for those few places that still need it.
+##
+mainboardinit pc80/serial.inc
+mainboardinit arch/i386/lib/console.inc
diff --git a/src/mainboard/emulation/qemu-i386/auto.c b/src/mainboard/emulation/qemu-i386/auto.c
new file mode 100644
index 0000000000..819a120018
--- /dev/null
+++ b/src/mainboard/emulation/qemu-i386/auto.c
@@ -0,0 +1,38 @@
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <cpu/p6/apic.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "cpu/p6/earlymtrr.c"
+
+/*
+ */
+void udelay(int usecs) 
+{
+	int i;
+	for(i = 0; i < usecs; i++)
+		outb(i&0xff, 0x80);
+}
+
+#include "lib/delay.c"
+#include "cpu/p6/boot_cpu.c"
+#include "debug.c"
+
+static void main(void)
+{
+	/*	init_timer();*/
+	outb(5, 0x80);
+	
+	uart_init();
+	console_init();
+	
+	//print_pci_devices();
+	//dump_pci_devices();
+}
diff --git a/src/mainboard/emulation/qemu-i386/chip.h b/src/mainboard/emulation/qemu-i386/chip.h
new file mode 100644
index 0000000000..ab5fa3bfd2
--- /dev/null
+++ b/src/mainboard/emulation/qemu-i386/chip.h
@@ -0,0 +1,5 @@
+extern struct chip_control mainboard_emulation_qemu_i386_control;
+
+struct mainboard_emulation_qemu_i386_config {
+	int nothing;
+};
diff --git a/src/mainboard/emulation/qemu-i386/debug.c b/src/mainboard/emulation/qemu-i386/debug.c
new file mode 100644
index 0000000000..714fcc5783
--- /dev/null
+++ b/src/mainboard/emulation/qemu-i386/debug.c
@@ -0,0 +1,128 @@
+
+static void print_debug_pci_dev(unsigned dev)
+{
+	print_debug("PCI: ");
+	print_debug_hex8((dev >> 16) & 0xff);
+	print_debug_char(':');
+	print_debug_hex8((dev >> 11) & 0x1f);
+	print_debug_char('.');
+	print_debug_hex8((dev >> 8) & 7);
+}
+
+static void print_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		print_debug_pci_dev(dev);
+		print_debug("\r\n");
+	}
+}
+
+static void dump_pci_device(unsigned dev)
+{
+	int i;
+	print_debug_pci_dev(dev);
+	print_debug("\r\n");
+	
+	for(i = 0; i <= 255; i++) {
+		unsigned char val;
+		if ((i & 0x0f) == 0) {
+			print_debug_hex8(i);
+			print_debug_char(':');
+		}
+		val = pci_read_config8(dev, i);
+		print_debug_char(' ');
+		print_debug_hex8(val);
+		if ((i & 0x0f) == 0x0f) {
+			print_debug("\r\n");
+		}
+	}
+}
+
+static void dump_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		dump_pci_device(dev);
+	}
+}
+#if 0
+static void dump_spd_registers(const struct mem_controller *ctrl)
+{
+	int i;
+	print_debug("\r\n");
+	for(i = 0; i < 4; i++) {
+		unsigned device;
+		device = ctrl->channel0[i];
+		if (device) {
+			int j;
+			print_debug("dimm: "); 
+			print_debug_hex8(i); 
+			print_debug(".0: ");
+			print_debug_hex8(device);
+			for(j = 0; j < 256; j++) {
+				int status;
+				unsigned char byte;
+				if ((j & 0xf) == 0) {
+					print_debug("\r\n");
+					print_debug_hex8(j);
+					print_debug(": ");
+				}
+				status = smbus_read_byte(device, j);
+				if (status < 0) {
+					print_debug("bad device\r\n");
+					break;
+				}
+				byte = status & 0xff;
+				print_debug_hex8(byte);
+				print_debug_char(' ');
+			}
+			print_debug("\r\n");
+		}
+		device = ctrl->channel1[i];
+		if (device) {
+			int j;
+			print_debug("dimm: "); 
+			print_debug_hex8(i); 
+			print_debug(".1: ");
+			print_debug_hex8(device);
+			for(j = 0; j < 256; j++) {
+				int status;
+				unsigned char byte;
+				if ((j & 0xf) == 0) {
+					print_debug("\r\n");
+					print_debug_hex8(j);
+					print_debug(": ");
+				}
+				status = smbus_read_byte(device, j);
+				if (status < 0) {
+					print_debug("bad device\r\n");
+					break;
+				}
+				byte = status & 0xff;
+				print_debug_hex8(byte);
+				print_debug_char(' ');
+			}
+			print_debug("\r\n");
+		}
+	}
+}
+#endif
diff --git a/src/mainboard/emulation/qemu-i386/failover.c b/src/mainboard/emulation/qemu-i386/failover.c
new file mode 100644
index 0000000000..bd0df4e89d
--- /dev/null
+++ b/src/mainboard/emulation/qemu-i386/failover.c
@@ -0,0 +1,29 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include "arch/romcc_io.h"
+#include "pc80/mc146818rtc_early.c"
+#include "cpu/p6/boot_cpu.c"
+
+static void main(void)
+{
+  /* for now, just always assume failure */
+
+#if 0
+	/* Is this a cpu reset? */
+	if (cpu_init_detected()) {
+		if (last_boot_normal()) {
+			asm("jmp __normal_image");
+		} else {
+			asm("jmp __cpu_reset");
+		}
+	}
+
+	/* This is the primary cpu how should I boot? */
+	else if (do_normal_boot()) {
+		asm("jmp __normal_image");
+	}
+#endif
+}
diff --git a/src/mainboard/emulation/qemu-i386/irq_tables.c b/src/mainboard/emulation/qemu-i386/irq_tables.c
new file mode 100644
index 0000000000..894c27dec5
--- /dev/null
+++ b/src/mainboard/emulation/qemu-i386/irq_tables.c
@@ -0,0 +1,32 @@
+/* This file was generated by getpir.c, do not modify! 
+   (but if you do, please run checkpir on it to verify)
+   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE, /* u32 signature */
+	PIRQ_VERSION,   /* u16 version   */
+	32+16*5,        /* there can be total 5 devices on the bus */
+	0,              /* Where the interrupt router lies (bus) */
+	0x88,           /* Where the interrupt router lies (dev) */
+	0x1c20,         /* IRQs devoted exclusively to PCI usage */
+	0x1106,         /* Vendor */
+	0x8231,         /* Device */
+	0,              /* Crap (miniport) */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0x5e,         /*  u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+	{
+		/* 8231 ethernet */
+		{0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0},
+		/* 8231 internal */
+		{0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0},
+		/* PCI slot */
+		{0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0},
+		{0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0},
+		{0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0},
+	}
+};
diff --git a/src/mainboard/emulation/qemu-i386/mainboard.c b/src/mainboard/emulation/qemu-i386/mainboard.c
new file mode 100644
index 0000000000..270e5df9eb
--- /dev/null
+++ b/src/mainboard/emulation/qemu-i386/mainboard.c
@@ -0,0 +1,49 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+
+#include <arch/io.h>
+#include <device/chip.h>
+#include "chip.h"
+
+void cpufixup(unsigned long mem)
+{
+	printk_spew("Welcome to LinuxBIOS CPU fixup. done.\n");
+}
+
+static int mainboard_scan_bus(device_t root, int maxbus) 
+{
+	int retval;
+	printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus);
+	retval = pci_scan_bus(root->bus, 0, 0xff, maxbus);
+	printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus);
+	return maxbus;
+}
+
+static struct device_operations mainboard_operations = {
+	.read_resources   = root_dev_read_resources,
+	.set_resources    = root_dev_set_resources,
+	.enable_resources = enable_childrens_resources,
+	.init             = 0,
+	.scan_bus         = mainboard_scan_bus,
+	.enable           = 0,
+};
+
+static void enumerate(struct chip *chip)
+{
+	struct chip *child;
+	dev_root.ops = &mainboard_operations;
+	chip->dev = &dev_root;
+	chip->bus = 0;
+	for(child = chip->children; child; child = child->next) {
+		child->bus = &dev_root.link[0];
+	}
+}
+
+struct chip_control mainboard_emulation_qemu_i386_control = {
+	.enumerate = enumerate, 
+	.name      = "qemu mainboard ",
+};
+