diff options
| author | Subrata Banik <subrata.banik@intel.com> | 2017-08-10 14:22:43 +0530 |
|---|---|---|
| committer | Aaron Durbin <adurbin@chromium.org> | 2017-08-16 23:30:12 +0000 |
| commit | 3e550446452a8dad886e02d708aa325266b65663 (patch) | |
| tree | ba652cb68ad54c762cb0b4723ab755dc0b880a93 /src | |
| parent | b27aa82a50cde46d43ea0dd6ad797eb9c248e6c8 (diff) | |
soc/intel/cannonlake: Add proper support to enable UART2 in 16550 mode
Need to perform a dummy read in order to activate LPSS UART's
16550 8-bit compatibility mode.
TEST=Able to get serial log in both 32 bit and 8 bit mode through
LPSS UART2 based on CONFIG_DRIVERS_UART_8250MEM_32 and
CONFIG_DRIVERS_UART_8250MEM selection.
Change-Id: Ief58fdcb8a91f9951a48c3bd7490b1c7fee17e48
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/intel/cannonlake/uart.c | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/src/soc/intel/cannonlake/uart.c b/src/soc/intel/cannonlake/uart.c index cb1273d399..af224eb9ce 100644 --- a/src/soc/intel/cannonlake/uart.c +++ b/src/soc/intel/cannonlake/uart.c @@ -27,6 +27,10 @@ #include <soc/pcr_ids.h> #include <soc/iomap.h> +/* Serial IO UART controller legacy mode */ +#define PCR_SERIAL_IO_GPPRVRW7 0x618 +#define PCR_SIO_PCH_LEGACY_UART(idx) (1 << (idx)) + static const struct port { struct pad_config pads[2]; /* just TX and RX */ device_t dev; @@ -55,6 +59,19 @@ void pch_uart_init(void) base = uart_platform_base(CONFIG_UART_FOR_CONSOLE); uart_common_init(p->dev, base); + + /* Put UART2 in byte access mode for 16550 compatibility */ + if (!IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM_32)) { + pcr_write32(PID_SERIALIO, PCR_SERIAL_IO_GPPRVRW7, + PCR_SIO_PCH_LEGACY_UART(CONFIG_UART_FOR_CONSOLE)); + + /* + * Dummy read after setting any of GPPRVRW7. + * Required for UART 16550 8-bit Legacy mode to become active + */ + lpss_clk_read(base); + } + gpio_configure_pads(p->pads, ARRAY_SIZE(p->pads)); } |