soc/cavium: Integrate BDK files into coreboot

* Make it compile.
* Fix whitespace errors.
* Fix printf formats.
* Add missing headers includes
* Guard headers with ifdefs

Compile DRAM init code in romstage.
Compile QLM, PCIe, RNG, PHY, GPIO, MDIO init code in ramstage.

Change-Id: I0a93219a14bfb6ebe41103a825d5032b11e7f2c6
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/25089
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 0 insertions, 105 deletions

diff --git a/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-mpi.h b/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-mpi.h
deleted file mode 100644
index 46da75b019..0000000000
--- a/src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-mpi.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/***********************license start***********************************
-* Copyright (c) 2003-2017  Cavium Inc. (support@cavium.com). All rights
-* reserved.
-*
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions are
-* met:
-*
-*   * Redistributions of source code must retain the above copyright
-*     notice, this list of conditions and the following disclaimer.
-*
-*   * Redistributions in binary form must reproduce the above
-*     copyright notice, this list of conditions and the following
-*     disclaimer in the documentation and/or other materials provided
-*     with the distribution.
-*
-*   * Neither the name of Cavium Inc. nor the names of
-*     its contributors may be used to endorse or promote products
-*     derived from this software without specific prior written
-*     permission.
-*
-* This Software, including technical data, may be subject to U.S. export
-* control laws, including the U.S. Export Administration Act and its
-* associated regulations, and may be subject to export or import
-* regulations in other countries.
-*
-* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
-* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
-* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT
-* TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
-* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
-* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
-* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
-* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT,
-* QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK
-* ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
-***********************license end**************************************/
-
-/**
- * @file
- *
- * Interface to the SPI / MPI bus
- *
- * <hr>$Revision: 49448 $<hr>
- *
- * @addtogroup hal
- * @{
- */
-
-typedef enum
-{
-    BDK_MPI_FLAGS_ENABLE_CS0    = 1<<0, /**< Chip select 0 will be needed */
-    BDK_MPI_FLAGS_ENABLE_CS1    = 1<<1, /**< Chip select 1 will be needed */
-    BDK_MPI_FLAGS_ENABLE_CS2    = 1<<2, /**< Chip select 2 will be needed */
-    BDK_MPI_FLAGS_ENABLE_CS3    = 1<<3, /**< Chip select 3 will be needed */
-    BDK_MPI_FLAGS_CS_ACTIVE_HI  = 1<<4, /**< Chip select is active high, else active low */
-    BDK_MPI_FLAGS_ONE_WIRE      = 1<<5, /**< Input and output are multiplexed over SPI_DO */
-    BDK_MPI_FLAGS_IDLE_CLOCKS   = 1<<7, /**< Continue to clock between commands */
-    BDK_MPI_FLAGS_IDLE_LOW      = 1<<8, /**< Clear the clock is idle high, Set the clock is idle low */
-    BDK_MPI_FLAGS_LSB_FIRST     = 1<<9, /**< Set to shift the LSB first, otherwise MSB will shift first */
-} bdk_mpi_flags_t;
-
-/**
- * Initialize MPI/SPI for use. The different configuration
- * options are encoded as bitmask inside the flags parameter.
- *
- * @param node   Numa node to use
- * @param clock_rate_hz
- *               Clock rate in Hz (1-16M)
- * @param flags  Setup flags ORed together
- *
- * @return Zero on success, negative on failure
- */
-extern int bdk_mpi_initialize(bdk_node_t node, int clock_rate_hz, bdk_mpi_flags_t flags);
-
-/**
- * Perform a SPI/MPI transfer. The transfer can contain tx_count
- * bytes that are transferred out, followed by rx_count bytes
- * that are read in. Both tx_count and rx_count may be zero if
- * no transfer is needed. Transmit data is sent most significant
- * byte first, unless BDK_MPI_FLAGS_LSB_FIRST is set. Receive data
- * is in the return value with the last byte in the least
- * signnificant byte.
- *
- * @param node     Numa node to use
- * @param chip_select
- *                 Which chip select to enable during the transfer
- * @param leave_cs_enabled
- *                 Leave the chip select assert after the transaction. Normally can
- *                 be zero. Set to non zero if you want to perform repeated
- *                 transactions.
- * @param tx_count Number of bytes to transfer before startng the rx/shift data.
- *                 Can be zero.
- * @param tx_data  Data to transmit. The low order bytes are used for the data. Order
- *                 of shift out is controlled by BDK_MPI_FLAGS_LSB_FIRST
- * @param rx_count Number of bytes to read. These bytes will be in the return value
- *                 least significant bytes
- *
- * @return Read data
- */
-extern uint64_t bdk_mpi_transfer(bdk_node_t node, int chip_select,
-    int leave_cs_enabled, int tx_count, uint64_t tx_data, int rx_count);
-
-/** @} */