diff options
author | David Hendricks <dhendricks@fb.com> | 2018-03-09 14:30:38 -0800 |
---|---|---|
committer | Philipp Deppenwiese <zaolin.daisuki@gmail.com> | 2018-07-03 15:53:32 +0000 |
commit | 7d48ac5c7dfb52fc470bbad1013b4d460bc6a1e0 (patch) | |
tree | 42002ba1e86627339ff4a6cf38efb4b3f00033bb /src/vendorcode/cavium/bdk/libbdk-hal/bdk-usb.c | |
parent | d837e660074e0621d63f59515f933c209441b653 (diff) |
soc/cavium: Integrate BDK files into coreboot
* Make it compile.
* Fix whitespace errors.
* Fix printf formats.
* Add missing headers includes
* Guard headers with ifdefs
Compile DRAM init code in romstage.
Compile QLM, PCIe, RNG, PHY, GPIO, MDIO init code in ramstage.
Change-Id: I0a93219a14bfb6ebe41103a825d5032b11e7f2c6
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/25089
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/vendorcode/cavium/bdk/libbdk-hal/bdk-usb.c')
-rw-r--r-- | src/vendorcode/cavium/bdk/libbdk-hal/bdk-usb.c | 683 |
1 files changed, 683 insertions, 0 deletions
diff --git a/src/vendorcode/cavium/bdk/libbdk-hal/bdk-usb.c b/src/vendorcode/cavium/bdk/libbdk-hal/bdk-usb.c new file mode 100644 index 0000000000..eb2a85fa0d --- /dev/null +++ b/src/vendorcode/cavium/bdk/libbdk-hal/bdk-usb.c @@ -0,0 +1,683 @@ +/***********************license start*********************************** +* Copyright (c) 2003-2017 Cavium Inc. (support@cavium.com). All rights +* reserved. +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are +* met: +* +* * Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* * Redistributions in binary form must reproduce the above +* copyright notice, this list of conditions and the following +* disclaimer in the documentation and/or other materials provided +* with the distribution. +* +* * Neither the name of Cavium Inc. nor the names of +* its contributors may be used to endorse or promote products +* derived from this software without specific prior written +* permission. +* +* This Software, including technical data, may be subject to U.S. export +* control laws, including the U.S. Export Administration Act and its +* associated regulations, and may be subject to export or import +* regulations in other countries. +* +* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" +* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR +* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT +* TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY +* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT +* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES +* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR +* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, +* QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK +* ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU. +***********************license end**************************************/ +#include <bdk.h> +#include <libbdk-arch/bdk-csrs-gpio.h> +#include <libbdk-arch/bdk-csrs-usbdrd.h> +#include <libbdk-arch/bdk-csrs-usbh.h> +#include <libbdk-hal/bdk-usb.h> +#include <libbdk-hal/bdk-config.h> + +/* This code is an optional part of the BDK. It is only linked in + if BDK_REQUIRE() needs it */ +BDK_REQUIRE_DEFINE(USB); + +/** + * Write to DWC3 indirect debug control register + * + * @param node Node to write to + * @param usb_port USB port to write to + * @param val 32bit value to write + */ +static void write_cr_dbg_cfg(bdk_node_t node, int usb_port, uint64_t val) +{ + if (!CAVIUM_IS_MODEL(CAVIUM_CN88XX)) + BDK_CSR_WRITE(node, BDK_USBDRDX_UCTL_PORTX_CR_DBG_CFG(usb_port, 0), val); + else + BDK_CSR_WRITE(node, BDK_USBHX_UCTL_PORTX_CR_DBG_CFG(usb_port, 0), val); +} + +/** + * Poll the DWC3 internal status until the ACK bit matches a desired value. Return + * the final status. + * + * @param node Node to query + * @param usb_port USB port to query + * @param desired_ack + * Desired ACK bit state + * + * @return Final status with ACK at correct state + */ +static bdk_usbdrdx_uctl_portx_cr_dbg_status_t get_cr_dbg_status(bdk_node_t node, int usb_port, int desired_ack) +{ + const int TIMEOUT = 1000000; /* 1 sec */ + bdk_usbdrdx_uctl_portx_cr_dbg_status_t status; + if (!CAVIUM_IS_MODEL(CAVIUM_CN88XX)) + { + if (BDK_CSR_WAIT_FOR_FIELD(node, BDK_USBDRDX_UCTL_PORTX_CR_DBG_STATUS(usb_port, 0), ack, ==, desired_ack, TIMEOUT)) + { + BDK_TRACE(USB_XHCI, "N%d.USB%d: Timeout waiting for indirect ACK\n", node, usb_port); + status.u = -1; + } + else + status.u = BDK_CSR_READ(node, BDK_USBDRDX_UCTL_PORTX_CR_DBG_STATUS(usb_port, 0)); + } + else + { + if (BDK_CSR_WAIT_FOR_FIELD(node, BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(usb_port, 0), ack, ==, desired_ack, TIMEOUT)) + { + BDK_TRACE(USB_XHCI, "N%d.USB%d: Timeout waiting for indirect ACK\n", node, usb_port); + status.u = -1; + } + else + status.u = BDK_CSR_READ(node, BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(usb_port, 0)); + } + return status; +} + +/** + * Perform an indirect read of an internal register inside the DWC3 usb block + * + * @param node Node to read + * @param usb_port USB port to read + * @param addr Indirect register address + * + * @return Value of the indirect register + */ +static uint32_t dwc3_uphy_indirect_read(bdk_node_t node, int usb_port, uint32_t addr) +{ + bdk_usbdrdx_uctl_portx_cr_dbg_cfg_t dbg_cfg; + bdk_usbdrdx_uctl_portx_cr_dbg_status_t status; + + /* See the CSR description for USBHX_UCTL_PORTX_CR_DBG_CFG, which describes + the steps implemented by this function */ + + dbg_cfg.u = 0; + dbg_cfg.s.data_in = addr; + write_cr_dbg_cfg(node, usb_port, dbg_cfg.u); + + dbg_cfg.s.cap_addr = 1; + write_cr_dbg_cfg(node, usb_port, dbg_cfg.u); + + status = get_cr_dbg_status(node, usb_port, 1); + if (status.u == (uint64_t)-1) + return 0xffffffff; + + write_cr_dbg_cfg(node, usb_port, 0); + get_cr_dbg_status(node, usb_port, 0); + + dbg_cfg.u = 0; + dbg_cfg.s.read = 1; + write_cr_dbg_cfg(node, usb_port, dbg_cfg.u); + + status = get_cr_dbg_status(node, usb_port, 1); + + write_cr_dbg_cfg(node, usb_port, 0); + get_cr_dbg_status(node, usb_port, 0); + + return status.s.data_out; +} + +/** + * Perform an indirect write of an internal register inside the DWC3 usb block + * + * @param node Node to write + * @param usb_port USB port to write + * @param addr Indirect register address + * @param value Value for write + */ +static void dwc3_uphy_indirect_write(bdk_node_t node, int usb_port, uint32_t addr, uint16_t value) +{ + bdk_usbdrdx_uctl_portx_cr_dbg_cfg_t dbg_cfg; + + /* See the CSR description for USBHX_UCTL_PORTX_CR_DBG_CFG, which describes + the steps implemented by this function */ + + dbg_cfg.u = 0; + dbg_cfg.s.data_in = addr; + write_cr_dbg_cfg(node, usb_port, dbg_cfg.u); + + dbg_cfg.s.cap_addr = 1; + write_cr_dbg_cfg(node, usb_port, dbg_cfg.u); + + get_cr_dbg_status(node, usb_port, 1); + + write_cr_dbg_cfg(node, usb_port, 0); + get_cr_dbg_status(node, usb_port, 0); + + dbg_cfg.u = 0; + dbg_cfg.s.data_in = value; + write_cr_dbg_cfg(node, usb_port, dbg_cfg.u); + + dbg_cfg.s.cap_data = 1; + write_cr_dbg_cfg(node, usb_port, dbg_cfg.u); + + get_cr_dbg_status(node, usb_port, 1); + + write_cr_dbg_cfg(node, usb_port, 0); + get_cr_dbg_status(node, usb_port, 0); + + dbg_cfg.u = 0; + dbg_cfg.s.write = 1; + write_cr_dbg_cfg(node, usb_port, dbg_cfg.u); + + get_cr_dbg_status(node, usb_port, 1); + + write_cr_dbg_cfg(node, usb_port, 0); + get_cr_dbg_status(node, usb_port, 0); +} + +/** + * Errata USB-29206 - The USB HS PLL in all 28nm devices has a + * design issue that may cause the VCO to lock up on + * initialization. The Synopsys VCO is designed with an even + * number of stages and no kick-start circuit, which makes us + * believe that there is no question a latched up + * (non-oscillating) state is possible. The workaround is to + * check the PLL lock bit, which is just based on a counter and + * will not set if the VCO is not oscillating, and if it's not + * set do a power down/power up cycle on the PLL, which tests + * have proven is much more likely to guarantee the VCO will + * start oscillating. Part of the problem appears to be that + * the normal init sequence holds the VCO in reset during the + * power up sequence, whereas the plain power up/down sequence + * does not, so the voltage changing may be helping the circuit + * to oscillate. + * + * @param node Node to check + * @param usb_port USB port to check + * + * @return Zero on success, negative on failure + */ +static int dwc3_uphy_check_pll(bdk_node_t node, int usb_port) +{ + /* Internal indirect register that reports if the phy PLL has lock. This will + be 1 if lock, 0 if no lock */ + const int DWC3_INT_IND_PLL_LOCK_REG = 0x200b; + /* Internal indirect UPHY register that controls the power to the UPHY PLL */ + const int DWC3_INT_IND_UPHY_PLL_PU = 0x2012; + /* Write enable bit for DWC3_INT_IND_PLL_POWER_CTL */ + const int DWC3_INT_IND_UPHY_PLL_PU_WE = 0x20; + /* Power enable bit for DWC3_INT_IND_PLL_POWER_CTL */ + const int DWC3_INT_IND_UPHY_PLL_PU_POWER_EN = 0x02; + + uint32_t pll_locked = dwc3_uphy_indirect_read(node, usb_port, DWC3_INT_IND_PLL_LOCK_REG); + int retry_count = 0; + while (!pll_locked) + { + if (retry_count >= 3) + { + bdk_error("N%d.USB%d: USB2 PLL failed to lock\n", node, usb_port); + return -1; + } + + retry_count++; + BDK_TRACE(USB_XHCI, "N%d.USB%d: USB2 PLL didn't lock, retry %d\n", node, usb_port, retry_count); + + /* Turn on write enable for PLL power control */ + uint32_t pwr_val = dwc3_uphy_indirect_read(node, usb_port, DWC3_INT_IND_UPHY_PLL_PU); + pwr_val |= DWC3_INT_IND_UPHY_PLL_PU_WE; + dwc3_uphy_indirect_write(node, usb_port, DWC3_INT_IND_UPHY_PLL_PU, pwr_val); + + /* Power down the PLL */ + pwr_val &= ~DWC3_INT_IND_UPHY_PLL_PU_POWER_EN; + dwc3_uphy_indirect_write(node, usb_port, DWC3_INT_IND_UPHY_PLL_PU, pwr_val); + bdk_wait_usec(1000); + + /* Power on the PLL */ + pwr_val |= DWC3_INT_IND_UPHY_PLL_PU_POWER_EN; + dwc3_uphy_indirect_write(node, usb_port, DWC3_INT_IND_UPHY_PLL_PU, pwr_val); + bdk_wait_usec(1000); + + /* Check for PLL Lock again */ + pll_locked = dwc3_uphy_indirect_read(node, usb_port, DWC3_INT_IND_PLL_LOCK_REG); + } + return 0; +} + +/** + * Initialize the clocks for USB such that it is ready for a generic XHCI driver + * + * @param node Node to init + * @param usb_port Port to intialize + * @param clock_type Type of clock connected to the usb port + * + * @return Zero on success, negative on failure + */ + +int bdk_usb_initialize(bdk_node_t node, int usb_port, bdk_usb_clock_t clock_type) +{ + int is_usbdrd = !CAVIUM_IS_MODEL(CAVIUM_CN88XX); + + /* Perform the following steps to initiate a cold reset. */ + + /* 1. Wait for all voltages to reach a stable state. Ensure the + reference clock is up and stable. + a. If 3.3V is up first, 0.85V must be soon after (within tens of ms). */ + + /* 2. Wait for IOI reset to deassert. */ + + /* 3. If Over Current indication and/or Port Power Control features + are desired, program the GPIO CSRs appropriately. + a. For Over Current Indication, select a GPIO for the input and + program GPIO_USBH_CTL[SEL]. + b. For Port Power Control, set one of + GPIO_BIT_CFG(0..19)[OUTPUT_SEL] = USBH_VBUS_CTRL. */ + + /* 4. Assert all resets: + a. UPHY reset: USBDRD(0..1)_UCTL_CTL[UPHY_RST] = 1 + b. UAHC reset: USBDRD(0..1)_UCTL_CTL[UAHC_RST] = 1 + c. UCTL reset: USBDRD(0..1)_UCTL_CTL[UCTL_RST] = 1 */ + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.uphy_rst = 1; + c.s.uahc_rst = 1; + c.s.uctl_rst = 1); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.uphy_rst = 1; + c.s.uahc_rst = 1; + c.s.uctl_rst = 1); + } + + /* 5. Configure the controller clock: + a. Reset the clock dividers: USBDRD(0..1)_UCTL_CTL[H_CLKDIV_RST] = 1. + b. Select the controller clock frequency + USBDRD(0..1)_UCTL_CTL[H_CLKDIV] = desired value. + USBDRD(0..1)_UCTL_CTL[H_CLKDIV_EN] = 1 to enable the controller + clock. + Read USBDRD(0..1)_UCTL_CTL to ensure the values take effect. + c. Deassert the controller clock divider reset: USB- + DRD(0..1)_UCTL_CTL[H_CLKDIV_RST] = 0. */ + uint64_t sclk_rate = bdk_clock_get_rate(node, BDK_CLOCK_SCLK); + uint64_t divider = (sclk_rate + 300000000-1) / 300000000; + /* + ** According to HRM Rules are: + ** - clock must be below 300MHz + ** USB3 full-rate requires 150 MHz or better + ** USB3 requires 125 MHz + ** USB2 full rate requires 90 MHz + ** USB2 requires 62.5 MHz + */ + if (divider <= 1) + divider = 0; + else if (divider <= 2) + divider = 1; + else if (divider <= 4) + divider = 2; + else if (divider <= 6) + divider = 3; + else if (divider <= 8) + divider = 4; + else if (divider <= 16) + divider = 5; + else if (divider <= 24) + divider = 6; + else + divider = 7; + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.h_clkdiv_rst = 1); + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.h_clkdiv_sel = divider; + c.s.h_clk_en = 1); + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.h_clkdiv_rst = 0); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.h_clkdiv_rst = 1); + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.h_clkdiv_sel = divider; + c.s.h_clk_en = 1); + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.h_clkdiv_rst = 0); + } + { + static bool printit[2] = {true,true}; + if (printit[usb_port]) { + uint64_t fr_div; + if (divider < 5) fr_div = divider * 2; + else fr_div = 8 * (divider - 3); + uint64_t freq = (typeof(freq)) (sclk_rate / fr_div); + const char *token; + if (freq < 62500000ULL) token = "???Low"; + else if (freq < 90000000ULL) token = "USB2"; + else if (freq < 125000000ULL) token = "USB2 Full"; + else if (freq < 150000000ULL) token = "USB3"; + else token = "USB3 Full"; + BDK_TRACE(USB_XHCI, "Freq %lld - %s\n", + (unsigned long long)freq, token); + printit[usb_port] = false; + } + } + + /* 6. Configure the strap signals in USBDRD(0..1)_UCTL_CTL. + a. Reference clock configuration (see Table 31.2): USB- + DRD(0..1)_UCTL_CTL[REF_CLK_FSEL, MPLL_MULTIPLIER, + REF_CLK_SEL, REF_CLK_DIV2]. + b. Configure and enable spread-spectrum for SuperSpeed: + USBDRD(0..1)_UCTL_CTL[SSC_RANGE, SSC_EN, SSC_REF_CLK_SEL]. + c. Enable USBDRD(0..1)_UCTL_CTL[REF_SSP_EN]. + d. Configure PHY ports: + USBDRD(0..1)_UCTL_CTL[USB*_PORT_PERM_ATTACH, USB*_PORT_DISABLE]. */ + if (is_usbdrd) + { + int ref_clk_src = 0; + int ref_clk_fsel = 0x27; + if (CAVIUM_IS_MODEL(CAVIUM_CN83XX)) { + if (BDK_USB_CLOCK_SS_PAD_HS_PAD != clock_type) { + bdk_error("Node %d usb_port %d: usb clock type %d is invalid\n", node, usb_port, clock_type); + return -1; + } + } + else if (CAVIUM_IS_MODEL(CAVIUM_CN81XX)) { + switch (clock_type) + { + default: + bdk_error("Node %d usb_port %d: usb clock type %d is invalid\n", node, usb_port, clock_type); + return -1; + case BDK_USB_CLOCK_SS_PAD_HS_PAD : ref_clk_src = 2; break; + case BDK_USB_CLOCK_SS_REF0_HS_REF0 : ref_clk_src = 0; break; /* Superspeed and high speed use DLM/QLM ref clock 0 */ + case BDK_USB_CLOCK_SS_REF1_HS_REF1 : ref_clk_src = 1; break; /* Superspeed and high speed use DLM/QLM ref clock 1 */ + case BDK_USB_CLOCK_SS_PAD_HS_PLL : ref_clk_src = 6; ref_clk_fsel = 0x7; break; /* Superspeed uses PAD clock, high speed uses PLL ref clock */ + case BDK_USB_CLOCK_SS_REF0_HS_PLL : ref_clk_src = 4; ref_clk_fsel = 0x7; break; /* Superspeed uses DLM/QLM ref clock 0, high speed uses PLL ref clock */ + case BDK_USB_CLOCK_SS_REF1_HS_PLL: ref_clk_src = 5; ref_clk_fsel =0x7; break; /* Superspeed uses DLM/QLM ref clock 1, high speed uses PLL ref clock */ + } + } + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.ref_clk_fsel = ref_clk_fsel; + c.s.mpll_multiplier = 0x19; + c.s.ref_clk_sel = ref_clk_src; + c.s.ref_clk_div2 = 0); + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.ssc_en = 1; + c.s.ssc_ref_clk_sel = 0); + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.ref_ssp_en = 1); + } + else + { + if (BDK_USB_CLOCK_SS_PAD_HS_PAD != clock_type) { + bdk_error("Node %d usb_port %d: usb clock type %d is invalid\n", node, usb_port, clock_type); + return -1; + } + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.ref_clk_fsel = 0x27; + c.s.mpll_multiplier = 0; + c.s.ref_clk_sel = 0; + c.s.ref_clk_div2 = 0); + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.ssc_en = 1; + c.s.ssc_ref_clk_sel = 0); + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.ref_ssp_en = 1); + } + /* Hardware default is for ports to be enabled and not perm attach. Don't + change it */ + + /* 7. The PHY resets in lowest-power mode. Power up the per-port PHY + logic by enabling the following: + a. USBDRD(0..1)_UCTL_CTL [HS_POWER_EN] if high-speed/full-speed/low- + speed functionality needed. + b. USBDRD(0..1)_UCTL_CTL [SS_POWER_EN] if SuperSpeed functionality + needed. */ + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.hs_power_en = 1; + c.s.ss_power_en = 1); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.hs_power_en = 1; + c.s.ss_power_en = 1); + } + + /* 8. Wait 10 controller-clock cycles from step 5. for controller clock + to start and async FIFO to properly reset. */ + bdk_wait_usec(1); + + /* 9. Deassert UCTL and UAHC resets: + a. USBDRD(0..1)_UCTL_CTL[UCTL_RST] = 0 + b. USBDRD(0..1)_UCTL_CTL[UAHC_RST] = 0 + c. [optional] For port-power control: + - Set one of GPIO_BIT_CFG(0..47)[PIN_SEL] = USB0_VBUS_CTRLor USB1_VBUS_CTRL. + - Set USBDRD(0..1)_UCTL_HOST_CFG[PPC_EN] = 1 and USBDRD(0..1)_UCTL_HOST_CFG[PPC_ACTIVE_HIGH_EN] = 1. + - Wait for the external power management chip to power the VBUS.ional port-power control. + ] + d. You will have to wait 10 controller-clock cycles before accessing + any controller-clock-only registers. */ + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.uctl_rst = 0); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.uctl_rst = 0); + } + bdk_wait_usec(1); + + int usb_gpio = bdk_config_get_int(BDK_CONFIG_USB_PWR_GPIO, node, usb_port); + int usb_polarity = bdk_config_get_int(BDK_CONFIG_USB_PWR_GPIO_POLARITY, node, usb_port); + if (-1 != usb_gpio) { + int gsrc = BDK_GPIO_PIN_SEL_E_USBX_VBUS_CTRL_CN88XX(usb_port); + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX)) { + gsrc = BDK_GPIO_PIN_SEL_E_USBX_VBUS_CTRL_CN88XX(usb_port); + } + else if (CAVIUM_IS_MODEL(CAVIUM_CN81XX)) { + gsrc = BDK_GPIO_PIN_SEL_E_USBX_VBUS_CTRL_CN81XX(usb_port); + } + else if (CAVIUM_IS_MODEL(CAVIUM_CN83XX)) { + gsrc = BDK_GPIO_PIN_SEL_E_USBX_VBUS_CTRL_CN83XX(usb_port);} + else { + bdk_error("USB_VBUS_CTRL GPIO: unknown chip model\n"); + } + + BDK_CSR_MODIFY(c,node,BDK_GPIO_BIT_CFGX(usb_gpio), + c.s.pin_sel = gsrc; + c.s.pin_xor = (usb_polarity) ? 0 : 1; + ); + + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_HOST_CFG(usb_port), + c.s.ppc_en = 1; + c.s.ppc_active_high_en = 1); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_HOST_CFG(usb_port), + c.s.ppc_en = 1; + c.s.ppc_active_high_en = 1); + } + bdk_wait_usec(100000); + } + + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.uahc_rst = 0); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.uahc_rst = 0); + } + + bdk_wait_usec(100000); + bdk_wait_usec(1); + + /* 10. Enable conditional coprocessor clock of UCTL by writing USB- + DRD(0..1)_UCTL_CTL[CSCLK_EN] = 1. */ + if (is_usbdrd) + { + if (CAVIUM_IS_MODEL(CAVIUM_CN8XXX)) + { + /* CN9XXX make coprocessor clock automatic */ + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.cn83xx.csclk_en = 1); + } + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.csclk_en = 1); + } + + /* 11. Set USBDRD(0..1)_UCTL_CTL[DRD_MODE] to 1 for device mode, 0 for + host mode. */ + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.drd_mode = 0); + } + + /* 12. Soft reset the UPHY and UAHC logic via the UAHC controls: + a. USBDRD(0..1)_UAHC_GUSB2PHYCFG(0)[PHYSOFTRST] = 1 + b. USBDRD(0..1)_UAHC_GUSB3PIPECTL(0)[PHYSOFTRST] = 1 + c. USBDRD(0..1)_UAHC_GCTL[CORESOFTRESET] = 1 */ + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UAHC_GUSB2PHYCFGX(usb_port, 0), + c.s.physoftrst = 1); + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UAHC_GUSB3PIPECTLX(usb_port, 0), + c.s.physoftrst = 1); + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UAHC_GCTL(usb_port), + c.s.coresoftreset = 1); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UAHC_GUSB2PHYCFGX(usb_port, 0), + c.s.physoftrst = 1); + BDK_CSR_MODIFY(c, node, BDK_USBHX_UAHC_GUSB3PIPECTLX(usb_port, 0), + c.s.physoftrst = 1); + BDK_CSR_MODIFY(c, node, BDK_USBHX_UAHC_GCTL(usb_port), + c.s.coresoftreset = 1); + } + + /* 13. Program USBDRD(0..1)_UAHC_GCTL[PRTCAPDIR] to 0x2 for device mode + or 0x1 for host mode. */ + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UAHC_GCTL(usb_port), + c.s.prtcapdir = 1); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UAHC_GCTL(usb_port), + c.s.prtcapdir = 1); + } + + /* 14. Wait 10us after step 13. for the PHY to complete its reset. */ + bdk_wait_usec(10); + + /* 15. Deassert UPHY reset: USBDRD(0..1)_UCTL_CTL[UPHY_RST] = 0. */ + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UCTL_CTL(usb_port), + c.s.uphy_rst = 0); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UCTL_CTL(usb_port), + c.s.uphy_rst = 0); + } + + /* 16. Wait for at least 45us after step 15. for UPHY to output + stable PHYCLOCK. */ + bdk_wait_usec(45); + + /* Workround Errata USB-29206 */ + if (dwc3_uphy_check_pll(node, usb_port)) + return -1; + + /* 17. Initialize any other strap signals necessary and make sure they + propagate by reading back the last register written. + a. UCTL + USBDRD(0..1)_UCTL_PORT0_CFG_*[*_TUNE] + USBDRD(0..1)_UCTL_PORT0_CFG_*[PCS_*] + USBDRD(0..1)_UCTL_PORT0_CFG_*[LANE0_TX_TERM_OFFSET] + USBDRD(0..1)_UCTL_PORT0_CFG_*[TX_VBOOST_LVL] + USBDRD(0..1)_UCTL__PORT0_CFG_*[LOS_BIAS] + USBDRD(0..1)_UCTL_HOST_CFG + USBDRD(0..1)_UCTL_SHIM_CFG + b. UAHC: only the following UAHC registers are accessible during + CoreSoftReset. + USBDRD(0..1)_UAHC_GCTL + USBDRD(0..1)_UAHC_GUCTL + USBDRD(0..1)_UAHC_GSTS + USBDRD(0..1)_UAHC_GUID + USBDRD(0..1)_UAHC_GUSB2PHYCFG(0) + USBDRD(0..1)_UAHC_GUSB3PIPECTL(0) */ + + /* 18. Release soft reset the UPHY and UAHC logic via the UAHC controls: + a. USBDRD(0..1)_UAHC_GUSB2PHYCFG(0)[PHYSOFTRST] = 0 + b. USBDRD(0..1)_UAHC_GUSB3PIPECTL(0)[PHYSOFTRST] = 0 + c. USBDRD(0..1)_UAHC_GCTL[CORESOFTRESET] = 0 */ + if (is_usbdrd) + { + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UAHC_GUSB2PHYCFGX(usb_port, 0), + c.s.physoftrst = 0); + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UAHC_GUSB3PIPECTLX(usb_port, 0), + c.s.physoftrst = 0); + BDK_CSR_MODIFY(c, node, BDK_USBDRDX_UAHC_GCTL(usb_port), + c.s.coresoftreset = 0); + } + else + { + BDK_CSR_MODIFY(c, node, BDK_USBHX_UAHC_GUSB2PHYCFGX(usb_port, 0), + c.s.physoftrst = 0); + BDK_CSR_MODIFY(c, node, BDK_USBHX_UAHC_GUSB3PIPECTLX(usb_port, 0), + c.s.physoftrst = 0); + BDK_CSR_MODIFY(c, node, BDK_USBHX_UAHC_GCTL(usb_port), + c.s.coresoftreset = 0); + } + + /* 19. Configure the remaining UAHC_G* registers as needed, including + any that were not configured in step 17.-b. */ + + /* 20. Initialize the USB controller: + a. To initialize the UAHC as a USB host controller, the application + should perform the steps described in the xHCI specification + (UAHC_X* registers). The xHCI sequence starts with poll for a 0 in + USBDRD(0..1)_UAHC_USBSTS[CNR]. + b. To initialize the UAHC as a device, the application should TBD. The + device initiation sequence starts with a device soft reset by + setting USBDRD(0..1)_UAHC_DCTL[CSFTRST] = 1 and wait for a read + operation to return 0. */ + return 0; +} |