coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)

This patch is a raw application of

 find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'

Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

7 files changed, 23 insertions, 23 deletions

diff --git a/src/superio/ite/common/env_ctrl.c b/src/superio/ite/common/env_ctrl.c
index f69273e984..57896e0c01 100644
--- a/src/superio/ite/common/env_ctrl.c
+++ b/src/superio/ite/common/env_ctrl.c
@@ -156,7 +156,7 @@ static void fan_smartconfig(const u16 base, const u8 fan,
 
 		/* 50% duty cycle by default */
 		const u8 duty = conf->pwm_start ? conf->pwm_start : 50;
-		if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_8BIT_PWM))
+		if (CONFIG(SUPERIO_ITE_ENV_CTRL_8BIT_PWM))
 			pwm_start = ITE_EC_FAN_CTL_PWM_DUTY(duty);
 		else
 			pwm_ctrl |= ITE_EC_FAN_CTL_PWM_DUTY(duty);
@@ -193,12 +193,12 @@ static void enable_fan(const u16 base, const u8 fan,
 	u8 reg;
 
 	if (conf->mode == FAN_IGNORE ||
-	    (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_NO_ONOFF) &&
+	    (CONFIG(SUPERIO_ITE_ENV_CTRL_NO_ONOFF) &&
 	     conf->mode <= FAN_MODE_OFF))
 		return;
 
 	/* FAN_CTL2 might have its own frequency setting */
-	if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_PWM_FREQ2) && fan == 2) {
+	if (CONFIG(SUPERIO_ITE_ENV_CTRL_PWM_FREQ2) && fan == 2) {
 		reg = ite_ec_read(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE);
 		reg &= ~ITE_EC_FAN_PWM_CLOCK_MASK;
 		reg |= ITE_EC_FAN_PWM_DEFAULT_CLOCK;
@@ -216,14 +216,14 @@ static void enable_fan(const u16 base, const u8 fan,
 		ite_ec_write(base, ITE_EC_FAN_CTL_MODE, reg);
 	}
 
-	if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG)
+	if (CONFIG(SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG)
 	    && conf->mode >= FAN_MODE_ON) {
 		reg = ite_ec_read(base, ITE_EC_FAN_TAC_COUNTER_ENABLE);
 		reg |= ITE_EC_FAN_TAC_16BIT_ENABLE(fan);
 		ite_ec_write(base, ITE_EC_FAN_TAC_COUNTER_ENABLE, reg);
 	}
 
-	if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS) && fan > 3) {
+	if (CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS) && fan > 3) {
 		reg = ite_ec_read(base, ITE_EC_FAN_SEC_CTL);
 		if (conf->mode >= FAN_MODE_ON)
 			reg |= ITE_EC_FAN_SEC_CTL_TAC_EN(fan);
@@ -238,7 +238,7 @@ static void enable_fan(const u16 base, const u8 fan,
 			reg &= ~ITE_EC_FAN_MAIN_CTL_TAC_EN(fan);
 
 		/* Some ITEs have SmartGuardian always enabled */
-		if (!IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_NO_ONOFF)) {
+		if (!CONFIG(SUPERIO_ITE_ENV_CTRL_NO_ONOFF)) {
 			if (conf->mode >= FAN_SMART_SOFTWARE)
 				reg |= ITE_EC_FAN_MAIN_CTL_SMART(fan);
 			else
diff --git a/src/superio/ite/common/env_ctrl.h b/src/superio/ite/common/env_ctrl.h
index e67af3445e..e29e33f54a 100644
--- a/src/superio/ite/common/env_ctrl.h
+++ b/src/superio/ite/common/env_ctrl.h
@@ -21,7 +21,7 @@
 
 #include "env_ctrl_chip.h"
 
-#if IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_8BIT_PWM)
+#if CONFIG(SUPERIO_ITE_ENV_CTRL_8BIT_PWM)
 #define ITE_EC_FAN_MAX_PWM			0xff
 #define ITE_EC_FAN_PWM_DEFAULT_CLOCK		ITE_EC_FAN_PWM_CLOCK_6MHZ
 #else
@@ -58,12 +58,12 @@
 #define   ITE_EC_FAN_SEC_CTL_TAC_EN(x)		(1 << (x))
 
 #define ITE_EC_FAN_TAC_LIMIT(x)						\
-	(((x) > 3 && IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS))	\
+	(((x) > 3 && CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS))	\
 						? (0x84 + ((x)-4) * 2)	\
 						: (0x10 + ((x)-1))	\
 	)
 #define ITE_EC_FAN_TAC_EXT_LIMIT(x)					\
-	(((x) > 3 && IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS))	\
+	(((x) > 3 && CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS))	\
 						? (0x85 + ((x)-4) * 2)	\
 						: (0x1b + ((x)-1))	\
 	)
@@ -87,12 +87,12 @@
 #define   ITE_EC_FAN_CTL_ON(x)			(1 << ((x)-1))
 
 #define ITE_EC_FAN_CTL_PWM_CONTROL(x)					\
-	(((x) > 3 && IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS))	\
+	(((x) > 3 && CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS))	\
 						? (0x1e + ((x)-4))	\
 						: (0x15 + ((x)-1))	\
 	)
 
-#if IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS)
+#if CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS)
 #define   ITE_EC_FAN_CTL_TEMPIN_MASK		(7 << 3)
 #define   ITE_EC_FAN_CTL_TEMPIN(x)		((((x)-1) & 7) << 3)
 #else
@@ -145,32 +145,32 @@ static const u8 ITE_EC_TEMP_ADJUST[] = { 0x56, 0x57, 0x59 };
 #define   ITE_EC_BEEP_FREQ_DIVISOR(x)		(((x) & 0x0f) << 0)
 
 #define ITE_EC_FAN_CTL_TEMP_LIMIT_OFF(x)				\
-	(((x) == 5 && IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS))	\
+	(((x) == 5 && CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS))	\
 						? (0xa0)		\
 						: (0x60 + ((x)-1) * 8)	\
 	)
 #define ITE_EC_FAN_CTL_TEMP_LIMIT_START(x)				\
-	(((x) == 5 && IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS))	\
+	(((x) == 5 && CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS))	\
 						? (0xa1)		\
 						: (0x61 + ((x)-1) * 8)	\
 	)
 #define ITE_EC_FAN_CTL_TEMP_LIMIT_FULL(x)				\
-	(((x) == 5 && IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS))	\
+	(((x) == 5 && CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS))	\
 						? (0xa2)		\
 						: (0x62 + ((x)-1) * 8)	\
 	)
 #define ITE_EC_FAN_CTL_PWM_START(x)					\
-	(((x) == 5 && IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS))	\
+	(((x) == 5 && CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS))	\
 						? (0xa3)		\
 						: (0x63 + ((x)-1) * 8)	\
 	)
 #define ITE_EC_FAN_CTL_PWM_AUTO(x)					\
-	(((x) == 5 && IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS))	\
+	(((x) == 5 && CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS))	\
 						? (0xa4)		\
 						: (0x64 + ((x)-1) * 8)	\
 	)
 #define ITE_EC_FAN_CTL_DELTA_TEMP(x)					\
-	(((x) == 5 && IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS))	\
+	(((x) == 5 && CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS))	\
 						? (0xa5)		\
 						: (0x65 + ((x)-1) * 8)	\
 	)
diff --git a/src/superio/ite/common/env_ctrl_chip.h b/src/superio/ite/common/env_ctrl_chip.h
index 68bf5a035f..923bfa3aea 100644
--- a/src/superio/ite/common/env_ctrl_chip.h
+++ b/src/superio/ite/common/env_ctrl_chip.h
@@ -21,7 +21,7 @@
 
 #define ITE_EC_TMPIN_CNT	3
 
-#if IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_5FANS)
+#if CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS)
 #define ITE_EC_FAN_CNT		5
 #else
 #define ITE_EC_FAN_CNT		3
diff --git a/src/superio/ite/it8716f/superio.c b/src/superio/ite/it8716f/superio.c
index c9330e70eb..de1ef0d73e 100644
--- a/src/superio/ite/it8716f/superio.c
+++ b/src/superio/ite/it8716f/superio.c
@@ -26,7 +26,7 @@
 
 #include "it8716f.h"
 
-#if !IS_ENABLED(CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL)
+#if !CONFIG(SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL)
 
 void init_ec(u16 base)
 {
diff --git a/src/superio/nuvoton/common/early_serial.c b/src/superio/nuvoton/common/early_serial.c
index 9b5c2d3759..b35ec9d8b9 100644
--- a/src/superio/nuvoton/common/early_serial.c
+++ b/src/superio/nuvoton/common/early_serial.c
@@ -64,7 +64,7 @@ void nuvoton_pnp_exit_conf_state(pnp_devfn_t dev)
 void nuvoton_enable_serial(pnp_devfn_t dev, u16 iobase)
 {
 	nuvoton_pnp_enter_conf_state(dev);
-	if (IS_ENABLED(CONFIG_SUPERIO_NUVOTON_NCT6776_COM_A))
+	if (CONFIG(SUPERIO_NUVOTON_NCT6776_COM_A))
 		/* Route GPIO8 pin group to COM A */
 		pnp_write_config(dev, 0x2a, 0x40);
 	pnp_set_logical_device(dev);
diff --git a/src/superio/nuvoton/npcd378/superio.c b/src/superio/nuvoton/npcd378/superio.c
index 1802193033..c1f557ebed 100644
--- a/src/superio/nuvoton/npcd378/superio.c
+++ b/src/superio/nuvoton/npcd378/superio.c
@@ -103,7 +103,7 @@ static void npcd378_init(struct device *dev)
 	}
 }
 
-#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
+#if CONFIG(HAVE_ACPI_TABLES)
 static void npcd378_ssdt(struct device *dev)
 {
 	struct resource *res;
@@ -157,7 +157,7 @@ static struct device_operations ops = {
 	.enable           = pnp_alt_enable,
 	.init             = npcd378_init,
 	.ops_pnp_mode     = &pnp_conf_mode_8787_aa,
-#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
+#if CONFIG(HAVE_ACPI_TABLES)
 	.acpi_fill_ssdt_generator = npcd378_ssdt,
 	.acpi_name = npcd378_acpi_name,
 #endif
diff --git a/src/superio/via/vt1211/superio.c b/src/superio/via/vt1211/superio.c
index 3468b6398b..4d7c8dedfc 100644
--- a/src/superio/via/vt1211/superio.c
+++ b/src/superio/via/vt1211/superio.c
@@ -112,7 +112,7 @@ static void vt1211_pnp_set_resources(struct device *dev)
 {
 	struct resource *res;
 
-#if IS_ENABLED(CONFIG_CONSOLE_SERIAL) && IS_ENABLED(CONFIG_DRIVERS_UART_8250IO)
+#if CONFIG(CONSOLE_SERIAL) && CONFIG(DRIVERS_UART_8250IO)
 	/* TODO: Do the same for SP2? */
 	if (dev->path.pnp.device == VT1211_SP1) {
 		for (res = dev->resource_list; res; res = res->next) {