Since some people disapprove of white space cleanups mixed in regular commits

while others dislike them being extra commits, let's clean them up once and
for all for the existing code. If it's ugly, let it only be ugly once :-)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 16 insertions, 16 deletions

diff --git a/src/southbridge/via/vt8231/vt8231_lpc.c b/src/southbridge/via/vt8231/vt8231_lpc.c
index 6c517ff492..c874528dec 100644
--- a/src/southbridge/via/vt8231/vt8231_lpc.c
+++ b/src/southbridge/via/vt8231/vt8231_lpc.c
@@ -25,7 +25,7 @@ static void pci_routing_fixup(struct device *dev)
 	printk(BIOS_INFO, "%s: dev is %p\n", __func__, dev);
 	if (dev) {
 		/* initialize PCI interupts - these assignments depend
-		   on the PCB routing of PINTA-D 
+		   on the PCB routing of PINTA-D
 
 		   PINTA = IRQ11
 		   PINTB = IRQ5
@@ -61,60 +61,60 @@ static void vt8231_init(struct device *dev)
 	enables = pci_read_config8(dev, 0x6C);
 	enables |= 0x80;
 	pci_write_config8(dev, 0x6C, enables);
-	
+
 	// Map 4MB of FLASH into the address space
 	pci_write_config8(dev, 0x41, 0x7f);
-	
+
 	// Set bit 6 of 0x40, because Award does it (IO recovery time)
-	// IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI 
+	// IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
 	// interrupts can be properly marked as level triggered.
 	enables = pci_read_config8(dev, 0x40);
 	pci_write_config8(dev, 0x40, enables);
-	
+
 	// Set 0x42 to 0xf0 to match Award bios
 	enables = pci_read_config8(dev, 0x42);
 	enables |= 0xf0;
 	pci_write_config8(dev, 0x42, enables);
-	
+
 	// Set bit 3 of 0x4a, to match award (dummy pci request)
 	enables = pci_read_config8(dev, 0x4a);
 	enables |= 0x08;
 	pci_write_config8(dev, 0x4a, enables);
-	
+
 	// Set bit 3 of 0x4f to match award (use INIT# as cpu reset)
 	enables = pci_read_config8(dev, 0x4f);
 	enables |= 0x08;
 	pci_write_config8(dev, 0x4f, enables);
-	
+
 	// Set 0x58 to 0x03 to match Award
 	pci_write_config8(dev, 0x58, 0x03);
-	
+
 	// enable the ethernet/RTC
 	if (dev) {
 		enables = pci_read_config8(dev, 0x51);
-		enables |= 0x18; 
+		enables |= 0x18;
 		pci_write_config8(dev, 0x51, enables);
 	}
 
 	// enable IDE, since Linux won't do it.
 	// First do some more things to devfn (17,0)
-	// note: this should already be cleared, according to the book. 
+	// note: this should already be cleared, according to the book.
 	enables = pci_read_config8(dev, 0x50);
 	printk(BIOS_DEBUG, "IDE enable in reg. 50 is 0x%x\n", enables);
 	enables &= ~8; // need manifest constant here!
 	printk(BIOS_DEBUG, "set IDE reg. 50 to 0x%x\n", enables);
 	pci_write_config8(dev, 0x50, enables);
-	
+
 	// set default interrupt values (IDE)
 	enables = pci_read_config8(dev, 0x4c);
 	printk(BIOS_DEBUG, "IRQs in reg. 4c are 0x%x\n", enables & 0xf);
-	// clear out whatever was there. 
+	// clear out whatever was there.
 	enables &= ~0xf;
 	enables |= 4;
 	printk(BIOS_DEBUG, "setting reg. 4c to 0x%x\n", enables);
 	pci_write_config8(dev, 0x4c, enables);
-	
-	// set up the serial port interrupts. 
+
+	// set up the serial port interrupts.
 	// com2 to 3, com1 to 4
 	pci_write_config8(dev, 0x46, 0x04);
 	pci_write_config8(dev, 0x47, 0x03);
@@ -123,7 +123,7 @@ static void vt8231_init(struct device *dev)
 	/* set up isa bus -- i/o recovery time, rom write enable, extend-ale */
 	pci_write_config8(dev, 0x40, 0x54);
 	//ethernet_fixup();
-	
+
 	// Start the rtc
 	rtc_init(0);
 }