sb/intel/i82801jx: Move early sb init to a common place

Setting southbridge GPIO is now done after console init,
which should be fine. This code is partially copied from
i82801ix.

Change-Id: I51dd30de4a82898b0f1d8c4308e8de4a00d1b7aa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36756
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 61 insertions, 0 deletions

diff --git a/src/southbridge/intel/i82801jx/early_init.c b/src/southbridge/intel/i82801jx/early_init.c
index 9d40cf2d27..469073240e 100644
--- a/src/southbridge/intel/i82801jx/early_init.c
+++ b/src/southbridge/intel/i82801jx/early_init.c
@@ -12,7 +12,10 @@
  * GNU General Public License for more details.
  */
 
+#include <console/console.h>
 #include <device/pci_ops.h>
+#include <southbridge/intel/common/gpio.h>
+#include <southbridge/intel/common/pmbase.h>
 #include "i82801jx.h"
 #include "chip.h"
 
@@ -52,3 +55,61 @@ void i82801jx_lpc_setup(void)
 	pci_write_config32(d31f0, D31F0_GEN3_DEC, config->gen3_dec);
 	pci_write_config32(d31f0, D31F0_GEN4_DEC, config->gen4_dec);
 }
+
+static void i82801jx_setup_bars(void)
+{
+	const pci_devfn_t d31f0 = PCI_DEV(0, 0x1f, 0);
+
+	/* Set up RCBA. */
+	pci_write_config32(d31f0, RCBA, (uintptr_t)DEFAULT_RCBA | 1);
+
+	/* Set up PMBASE. */
+	pci_write_config32(d31f0, D31F0_PMBASE, DEFAULT_PMBASE | 1);
+	/* Enable PMBASE. */
+	pci_write_config8(d31f0, D31F0_ACPI_CNTL, 0x80);
+
+	/* Set up GPIOBASE. */
+	pci_write_config32(d31f0, D31F0_GPIO_BASE, DEFAULT_GPIOBASE);
+		/* Enable GPIO. */
+	pci_write_config8(d31f0, D31F0_GPIO_CNTL,
+			  pci_read_config8(d31f0, D31F0_GPIO_CNTL) | 0x10);
+}
+
+#define TCO_BASE 0x60
+
+void i82801jx_early_init(void)
+{
+	const pci_devfn_t d31f0 = PCI_DEV(0, 0x1f, 0);
+
+	printk(BIOS_DEBUG, "Setting up static southbridge registers...");
+	i82801jx_setup_bars();
+	printk(BIOS_DEBUG, " done.\n");
+
+	setup_pch_gpios(&mainboard_gpio_map);
+
+	printk(BIOS_DEBUG, "Disabling Watchdog reboot...");
+	RCBA32(GCS) = RCBA32(GCS) | (1 << 5);	/* No reset */
+	write_pmbase16(TCO_BASE + 0x8, (1 << 11));	/* halt timer */
+	write_pmbase16(TCO_BASE + 0x4, (1 << 3));	/* clear timeout */
+	write_pmbase16(TCO_BASE + 0x6, (1 << 1));	/* clear 2nd timeout */
+	printk(BIOS_DEBUG, " done.\n");
+
+	/* Enable IOAPIC */
+	RCBA8(OIC) = 0x3;
+	RCBA8(OIC);
+
+	/* Initialize power management initialization
+	   register early as it affects reboot behavior. */
+	/* Bit 20 activates global reset of host and ME on cf9 writes of 0x6
+	   and 0xe (required if ME is disabled but present), bit 31 locks it.
+	   The other bits are 'must write'. */
+	u8 reg8 = pci_read_config8(d31f0, 0xac);
+	reg8 |= (1 << 31) | (1 << 30) | (1 << 20) | (3 << 8);
+	pci_write_config8(d31f0, 0xac, reg8);
+
+	/* TODO: If RTC power failed, reset RTC state machine
+		(set, then reset RTC 0x0b bit7) */
+
+	/* TODO: Check power state bits in GEN_PMCON_2 (D31F0 0xa2)
+		before they get cleared. */
+}