first round name simplification. drop the <component>_ prefix.

the prefix was introduced in the early v2 tree many years ago
because our old build system "newconfig" could not handle two files with
the same name in different paths like /path/to/usb.c and
/another/path/to/usb.c correctly. Only one of the files would end up
being compiled into the final image.

Since Kconfig (actually since shortly before we switched to Kconfig) we
don't suffer from that problem anymore. So we could drop the sb700_
prefix from all those filenames (or, the <componentname>_ prefix in general)

- makes it easier to fork off a new chipset
- makes it easier to diff against other chipsets
- storing redundant information in filenames seems wrong

Signed-off-by: <stepan@coresystems.de>

Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 130 insertions, 0 deletions

diff --git a/src/southbridge/intel/i82801ex/early_smbus.c b/src/southbridge/intel/i82801ex/early_smbus.c
new file mode 100644
index 0000000000..cdf1f62c57
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/early_smbus.c
@@ -0,0 +1,130 @@
+#include "smbus.h"
+
+#define SMBUS_IO_BASE 0x0f00
+
+static void enable_smbus(void)
+{
+	device_t dev = PCI_DEV(0x0, 0x1f, 0x3);
+
+	print_spew("SMBus controller enabled\n");
+
+	pci_write_config32(dev, 0x20, SMBUS_IO_BASE | 1);
+	print_debug_hex32(pci_read_config32(dev, 0x20));
+	/* Set smbus enable */
+	pci_write_config8(dev, 0x40, 1);
+	/* Set smbus iospace enable */
+	pci_write_config8(dev, 0x4, 1);
+	/* SMBALERT_DIS */
+	pci_write_config8(dev, 0x11, 4);
+
+	/* Disable interrupt generation */
+	outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+
+	/* clear any lingering errors, so the transaction will run */
+	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+}
+
+static int smbus_read_byte(unsigned device, unsigned address)
+{
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
+}
+
+#ifdef UNUSED_CODE
+static void smbus_write_byte(unsigned device, unsigned address, unsigned char val)
+{
+	if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) {
+		return;
+	}
+
+	print_debug("Unimplemented smbus_write_byte() called.\n");
+
+#if 0
+	/* setup transaction */
+	/* disable interrupts */
+	outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)),
+			SMBUS_IO_BASE + SMBGCTL);
+	/* set the device I'm talking too */
+	outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR);
+	outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+	/* set up for a byte data write */ /* FIXME */
+	outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x1), SMBUS_IO_BASE + SMBGCTL);
+	/* clear any lingering errors, so the transaction will run */
+	/* Do I need to write the bits to a 1 to clear an error? */
+	outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS);
+
+	/* clear the data word...*/
+	outw(val, SMBUS_IO_BASE + SMBHSTDAT);
+
+	/* start the command */
+	outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL);
+
+	/* poll for transaction completion */
+	smbus_wait_until_done(SMBUS_IO_BASE);
+#endif
+	return;
+}
+
+static int smbus_write_block(unsigned device, unsigned length, unsigned cmd,
+		 unsigned data1, unsigned data2)
+{
+	unsigned char byte;
+	unsigned char stat;
+	int i;
+
+	/* chear the PM timeout flags, SECOND_TO_STS */
+	outw(inw(0x0400 + 0x66), 0x0400 + 0x66);
+
+	if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) {
+		return -2;
+	}
+
+	/* setup transaction */
+	/* Obtain ownership */
+	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+	for(stat=0;(stat&0x40)==0;) {
+	stat = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+	}
+	/* clear the done bit */
+	outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT);
+	/* disable interrupts */
+	outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD);
+
+	/* set the command address */
+	outb(cmd & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
+
+	/* set the block length */
+	outb(length & 0xFF, SMBUS_IO_BASE + SMBHSTDAT0);
+
+	/* try sending out the first byte of data here */
+	byte=(data1>>(0))&0x0ff;
+	outb(byte,SMBUS_IO_BASE + SMBBLKDAT);
+	/* issue a block write command */
+	outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x5 << 2) | 0x40,
+			SMBUS_IO_BASE + SMBHSTCTL);
+
+	for(i=0;i<length;i++) {
+
+		/* poll for transaction completion */
+		if (smbus_wait_until_blk_done(SMBUS_IO_BASE) < 0) {
+			return -3;
+		}
+
+		/* load the next byte */
+		if(i>3)
+			byte=(data2>>(i%4))&0x0ff;
+		else
+			byte=(data1>>(i))&0x0ff;
+		outb(byte,SMBUS_IO_BASE + SMBBLKDAT);
+
+		/* clear the done bit */
+		outb(inb(SMBUS_IO_BASE + SMBHSTSTAT),
+				SMBUS_IO_BASE + SMBHSTSTAT);
+	}
+
+	print_debug("SMBUS Block complete\n");
+	return 0;
+}
+#endif