This does the following:

cd coreboot/src/southbridge
svn mv i82801ca i82801cx
svn mv i82801dbm i82801dx
svn mv i82801er i82801ex
svn copy i82801xx i82801bx
svn mv i82801xx i82801ax

Plus, fixing up the filenames in these directories and the romstage.c and
Kconfig files of the mainboards using those drivers.
Plus, switching the thomson ip1000 and rca rm4100 to the i82801dx driver.

There's a lot more to be done, like 
- adding device IDs for the ICH3 and newer drivers that have been kept in
  i82801xx so far
- drop the additional parts support from the ax and bx drivers.


Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Joseph Smith <joe@settoplinux.org>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5167 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 19 insertions, 0 deletions

diff --git a/src/southbridge/intel/i82801cx/cmos_failover.c b/src/southbridge/intel/i82801cx/cmos_failover.c
new file mode 100644
index 0000000000..ab1816fbd8
--- /dev/null
+++ b/src/southbridge/intel/i82801cx/cmos_failover.c
@@ -0,0 +1,19 @@
+//kind of cmos_err for ich3
+
+#include "i82801cx.h"
+
+static void check_cmos_failed(void) 
+{
+#if CONFIG_HAVE_OPTION_TABLE
+	uint8_t byte = pci_read_config8(PCI_DEV(0,0x1f,0),GEN_PMCON_3);
+
+	if( byte & RTC_BATTERY_DEAD) {
+		// Set boot_option and last_boot to 'Fallback',
+		// clear reboot_bits
+        byte = cmos_read(RTC_BOOT_BYTE);
+        byte &= 0x0c;
+        byte |= CONFIG_MAX_REBOOT_CNT << 4;
+        cmos_write(byte, RTC_BOOT_BYTE);
+    }
+#endif
+}