summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
diff options
context:
space:
mode:
authorMichael Xie <Michael.Xie@amd.com>2008-09-22 13:07:20 +0000
committerStefan Reinauer <stepan@openbios.org>2008-09-22 13:07:20 +0000
commit06755e404eb4b97dab5bc5ff90443f7d7d74d3cf (patch)
tree5558c824b995599f02caad278c646587bdc7e8b5 /src/southbridge/amd
parent0b0771d180d5b18a3d698ccac54449112a9fca91 (diff)
Patch for AMD RS690 chipset.
All the PCIe slots are enabled in this patch except power management. Signed-off-by: Michael Xie <Michael.Xie@amd.com> Reviewed-by: Marc Jones <marc.jones@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3588 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/amd')
-rw-r--r--src/southbridge/amd/rs690/Config.lb27
-rw-r--r--src/southbridge/amd/rs690/chip.h40
-rw-r--r--src/southbridge/amd/rs690/rs690.c228
-rw-r--r--src/southbridge/amd/rs690/rs690.h152
-rw-r--r--src/southbridge/amd/rs690/rs690_cmn.c314
-rw-r--r--src/southbridge/amd/rs690/rs690_early_setup.c469
-rw-r--r--src/southbridge/amd/rs690/rs690_gfx.c582
-rw-r--r--src/southbridge/amd/rs690/rs690_ht.c90
-rw-r--r--src/southbridge/amd/rs690/rs690_pcie.c422
9 files changed, 2324 insertions, 0 deletions
diff --git a/src/southbridge/amd/rs690/Config.lb b/src/southbridge/amd/rs690/Config.lb
new file mode 100644
index 0000000000..dbb7d1efbf
--- /dev/null
+++ b/src/southbridge/amd/rs690/Config.lb
@@ -0,0 +1,27 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+##
+##
+
+config chip.h
+driver rs690_cmn.o
+driver rs690.o
+driver rs690_pcie.o
+driver rs690_ht.o
+driver rs690_gfx.o
diff --git a/src/southbridge/amd/rs690/chip.h b/src/southbridge/amd/rs690/chip.h
new file mode 100644
index 0000000000..9eb71aa0b3
--- /dev/null
+++ b/src/southbridge/amd/rs690/chip.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef RS690_CHIP_H
+#define RS690_CHIP_H
+
+/* Member variables are defined in Config.lb. */
+struct southbridge_amd_rs690_config
+{
+ unsigned long vga_rom_address; /* The location that the VGA rom has been appened. */
+ u8 gpp_configuration; /* The configuration of General Purpose Port, A/B/C/D/E. */
+ u8 port_enable; /* Which port is enabled? GFX(2,3), GPP(4,5,6,7) */
+ u8 gfx_dev2_dev3; /* for GFX Core initialization REFCLK_SEL */
+ u8 gfx_dual_slot; /* Is it dual graphics slots */
+ u8 gfx_lane_reversal; /* Single/Dual slot lan reversal */
+ u8 gfx_tmds; /* whether support TMDS? */
+ u8 gfx_compliance; /* whether support compliance? */
+ u8 gfx_reconfiguration; /* Dynamic Lind Width Control */
+ u8 gfx_link_width; /* Desired width of lane 2 */
+};
+struct chip_operations;
+extern struct chip_operations southbridge_amd_rs690_ops;
+
+#endif /* RS690_CHIP_H */
diff --git a/src/southbridge/amd/rs690/rs690.c b/src/southbridge/amd/rs690/rs690.c
new file mode 100644
index 0000000000..dab5167d94
--- /dev/null
+++ b/src/southbridge/amd/rs690/rs690.c
@@ -0,0 +1,228 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+
+#include <arch/io.h>
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include "rs690.h"
+
+static device_t find_nb_dev(device_t dev, u32 devfn)
+{
+ device_t nb_dev;
+
+ nb_dev = dev_find_slot(dev->bus->secondary, devfn);
+
+ if (!nb_dev)
+ return nb_dev;
+
+ if ((nb_dev->vendor != PCI_VENDOR_ID_ATI)
+ || (nb_dev->device != PCI_DEVICE_ID_ATI_RS690_HT)) {
+ u32 id;
+ id = pci_read_config32(nb_dev, PCI_VENDOR_ID);
+ if (id != (PCI_VENDOR_ID_ATI | (PCI_DEVICE_ID_ATI_RS690_HT << 16))) {
+ nb_dev = 0;
+ }
+ }
+ return nb_dev;
+}
+
+/*****************************************
+* Compliant with CIM_33's ATINB_MiscClockCtrl
+*****************************************/
+void static rs690_config_misc_clk(device_t nb_dev)
+{
+ u32 reg;
+ u16 word;
+ /* u8 byte; */
+ struct bus pbus; /* fake bus for dev0 fun1 */
+
+ reg = pci_read_config32(nb_dev, 0x4c);
+ reg |= 1 << 0;
+ pci_write_config32(nb_dev, 0x4c, reg);
+
+ word = pci_cf8_conf1.read16(&pbus, 0, 1, 0xf8);
+ word &= 0xf00;
+ pci_cf8_conf1.write16(&pbus, 0, 1, 0xf8, word);
+
+ word = pci_cf8_conf1.read16(&pbus, 0, 1, 0xe8);
+ word &= ~((1 << 12) | (1 << 13) | (1 << 14));
+ word |= 1 << 13;
+ pci_cf8_conf1.write16(&pbus, 0, 1, 0xe8, word);
+
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94);
+ reg &= ~((1 << 16) | (1 << 24) | (1 << 28));
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg);
+
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x8c);
+ reg &= ~((1 << 13) | (1 << 14) | (1 << 24) | (1 << 25));
+ reg |= 1 << 13;
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0x8c, reg);
+
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0xcc);
+ reg |= 1 << 24;
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0xcc, reg);
+
+ reg = nbmc_read_index(nb_dev, 0x7a);
+ reg &= ~0x3f;
+ reg |= 1 << 2;
+ reg &= ~(1 << 6);
+ set_htiu_enable_bits(nb_dev, 0x05, 1 << 11, 1 << 11);
+ nbmc_write_index(nb_dev, 0x7a, reg);
+ /* Powering Down efuse and strap block clocks after boot-up. GFX Mode. */
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0xcc);
+ reg &= ~(1 << 23);
+ reg |= 1 << 24;
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0xcc, reg);
+#if 0
+ /* Powerdown reference clock to graphics core PLL in northbridge only mode */
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x8c);
+ reg |= 1 << 21;
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0x8c, reg);
+
+ /* Powering Down efuse and strap block clocks after boot-up. NB Only Mode. */
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0xcc);
+ reg |= (1 << 23) | (1 << 24);
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0xcc, reg);
+
+ /* Powerdown clock to memory controller in northbridge only mode */
+ byte = pci_cf8_conf1.read8(&pbus, 0, 1, 0xe4);
+ byte |= 1 << 0;
+ pci_cf8_conf1.write8(&pbus, 0, 1, 0xe4, reg);
+
+ /* CLKCFG:0xE8 Bit[17] = 0x1 Powerdown clock to IOC GFX block in no external graphics mode */
+ /* TODO: */
+#endif
+
+ reg = pci_read_config32(nb_dev, 0x4c);
+ reg &= ~(1 << 0);
+ pci_write_config32(nb_dev, 0x4c, reg);
+
+ set_htiu_enable_bits(nb_dev, 0x05, 7 << 8, 7 << 8);
+}
+
+/***********************************************
+* 0:00.0 NBCFG :
+* 0:00.1 CLK : bit 0 of nb_cfg 0x4c : 0 - disable, default
+* 0:01.0 P2P Internal:
+* 0:02.0 P2P : bit 2 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:03.0 P2P : bit 3 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:04.0 P2P : bit 4 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:05.0 P2P : bit 5 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:06.0 P2P : bit 6 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:07.0 P2P : bit 7 of nbmiscind 0x0c : 0 - enable, default + 32 * 2
+* 0:08.0 NB2SB : bit 6 of nbmiscind 0x00 : 0 - disable, default + 32 * 1
+* case 0 will be called twice, one is by cpu in hypertransport.c line458,
+* the other is by rs690.
+***********************************************/
+void rs690_enable(device_t dev)
+{
+ device_t nb_dev = 0, sb_dev = 0;
+ int index = -1;
+ u32 i;
+ u32 devfn;
+ u32 deviceid, vendorid;
+
+ vendorid = pci_read_config32(dev, PCI_VENDOR_ID);
+ deviceid = (vendorid >> 16) & 0xffff;
+ vendorid &= 0xffff;
+ printk_info("rs690_enable VID=0x%x, DID=0x%x\n", vendorid, deviceid);
+
+ /**********************************************************
+ * Work for bus0, internal GFX located on bus1 and will return after find_nb_dev.
+ **********************************************************/
+ i = (dev->path.u.pci.devfn) & ~7;
+ for (devfn = 0; devfn <= i; devfn += (1 << 3)) {
+ nb_dev = find_nb_dev(dev, devfn);
+ if (nb_dev)
+ break;
+ }
+ if (!nb_dev) {
+ printk_info("CAN NOT FIND RS690 DEVICE!\n");
+ return; /* nb_dev is not dev */
+ }
+
+ /* sb_dev (dev 8) is a bridge that links to southbridge. */
+ sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0));
+ if (!sb_dev) {
+ printk_info("rs690_enable CAN NOT FIND SB bridge, HALT!\n");
+ for (;;) ;
+ }
+
+ printk_info("rs690_enable bus0, dev=0x%x\n", (dev->path.u.pci.devfn - devfn) >> 3);
+ switch (dev->path.u.pci.devfn - devfn) {
+ case 0: /* bus0, dev0, fun0; */
+ printk_info("Bus-0, Dev-0, Fun-0.\n");
+ enable_pcie_bar3(nb_dev); /* PCIEMiscInit */
+ config_gpp_core(nb_dev, sb_dev);
+ rs690_gpp_sb_init(nb_dev, sb_dev, 8);
+ /* set SB payload size: 64byte */
+ set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPPSB, 3 << 11, 2 << 11);
+
+ /* Bus0Dev0Fun1Clock control init, we have to do it here, for dev0 Fun1 doesn't have a vendor or device ID */
+ rs690_config_misc_clk(nb_dev);
+ break;
+
+ case 1 << 3: /* bus0, dev1 */
+ printk_info("Bus-0, Dev-1, Fun-0.\n");
+ break;
+ case 2 << 3: /* bus0, dev2,3, two GFX */
+ case 3 << 3:
+ printk_info("Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled);
+ index = (dev->path.u.pci.devfn - devfn) >> 3;
+ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << index,
+ (dev->enabled ? 0 : 1) << index);
+ if (dev->enabled)
+ rs690_gfx_init(nb_dev, dev, index);
+ break;
+ case 4 << 3: /* bus0, dev4-7, four GPP */
+ case 5 << 3:
+ case 6 << 3:
+ case 7 << 3:
+ printk_info("Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n",
+ dev->enabled);
+ index = (dev->path.u.pci.devfn - devfn) >> 3;
+ set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << index,
+ (dev->enabled ? 0 : 1) << index);
+ if (dev->enabled)
+ rs690_gpp_sb_init(nb_dev, dev, index);
+ break;
+ case 8 << 3: /* bus0, dev8, SB */
+ printk_info("Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled);
+ set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6,
+ (dev->enabled ? 1 : 0) << 6);
+ if (dev->enabled)
+ rs690_gpp_sb_init(nb_dev, dev, index);
+ disable_pcie_bar3(nb_dev);
+ break;
+ default:
+ printk_debug("unknown dev: %s\n", dev_path(dev));
+ }
+}
+
+struct chip_operations southbridge_amd_rs690_ops = {
+ CHIP_NAME("ATI RS690")
+ .enable_dev = rs690_enable,
+};
diff --git a/src/southbridge/amd/rs690/rs690.h b/src/southbridge/amd/rs690/rs690.h
new file mode 100644
index 0000000000..e617d600db
--- /dev/null
+++ b/src/southbridge/amd/rs690/rs690.h
@@ -0,0 +1,152 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __RS690_H__
+#define __RS690_H__
+
+#include <stdint.h>
+#include "chip.h"
+
+#define PCI_DEVICE_ID_ATI_RS690_HT 0x7910
+#define PCI_DEVICE_ID_ATI_RS690_PCIE 0x7912
+#define PCI_DEVICE_ID_ATI_RS690_PCIE_DEV2 0x7913
+#define PCI_DEVICE_ID_ATI_RS690_PCIE_DEV3 0x791B
+#define PCI_DEVICE_ID_ATI_RS690_PCIE_DEV4 0x7914
+#define PCI_DEVICE_ID_ATI_RS690_PCIE_DEV5 0x7915
+#define PCI_DEVICE_ID_ATI_RS690_PCIE_DEV6 0x7916
+#define PCI_DEVICE_ID_ATI_RS690_PCIE_DEV7 0x7917
+#define PCI_DEVICE_ID_ATI_RS690_PCIE_DEV8 0x7918
+#define PCI_DEVICE_ID_ATI_RS690_INT_GFX 0x791e
+#define PCI_DEVICE_ID_ATI_RS690MT_INT_GFX 0x791f
+
+#define NBMISC_INDEX 0x60
+#define NBHTIU_INDEX 0xA8
+#define NBMC_INDEX 0xE8
+#define NBPCIE_INDEX 0xE0
+#define EXT_CONF_BASE_ADDRESS 0xE0000000
+#define TEMP_MMIO_BASE_ADDRESS 0xC0000000
+
+typedef struct __PCIE_CFG__ {
+ u16 Config;
+ u8 ResetReleaseDelay;
+ u8 Gfx0Width;
+ u8 Gfx1Width;
+ u8 GfxPayload;
+ u8 GppPayload;
+ u8 PortDetect;
+ u8 PortHp; /* hot plug */
+ u16 DbgConfig;
+ u32 DbgConfig2;
+ u8 GfxLx;
+ u8 GppLx;
+ u8 NBSBLx;
+ u8 PortSlotInit;
+ u8 Gfx0Pwr;
+ u8 Gfx1Pwr;
+ u8 GppPwr;
+} PCIE_CFG;
+
+/* PCIE config flags */
+#define PCIE_DUALSLOT_CONFIG (1 << 0)
+#define PCIE_OVERCLOCK_ENABLE (1 << 1)
+#define PCIE_GPP_CLK_GATING (1 << 2)
+#define PCIE_ENABLE_STATIC_DEV_REMAP (1 << 3)
+#define PCIE_OFF_UNUSED_GFX_LANES (1 << 4)
+#define PCIE_OFF_UNUSED_GPP_LANES (1 << 5)
+#define PCIE_DISABLE_HIDE_UNUSED_PORTS (1 << 7)
+#define PCIE_GFX_CLK_GATING (1 << 11)
+#define PCIE_GFX_COMPLIANCE (1 << 14)
+#define PCIE_GPP_COMPLIANCE (1 << 15)
+
+typedef enum _NB_REVISION_ {
+ REV_RS690_A11 = 5,
+ REV_RS690_A12 = 6,
+ REV_RS690_A21 = 7,
+} NB_REVISION;
+
+/* -------------------- ----------------------
+* NBMISCIND
+ ------------------- -----------------------*/
+#define PCIE_LINK_CFG 0x8
+#define PCIE_NBCFG_REG7 0x37
+#define STRAPS_OUTPUT_MUX_7 0x67
+#define STRAPS_OUTPUT_MUX_A 0x6a
+
+/* -------------------- ----------------------
+* PCIEIND
+ ------------------- -----------------------*/
+#define PCIE_CI_CNTL 0x20
+#define PCIE_LC_LINK_WIDTH 0xa2
+#define PCIE_LC_STATE0 0xa5
+#define PCIE_VC0_RESOURCE_STATUS 0x11a /* 16bit read only */
+
+#define PCIE_CORE_INDEX_GFX (0 << 16) /* see 5.2.2 */
+#define PCIE_CORE_INDEX_GPPSB (1 << 16)
+
+/* contents of PCIE_NBCFG_REG7 */
+#define RECONFIG_GPPSB_EN (1 << 12)
+#define RECONFIG_GPPSB_GPPSB (1 << 14)
+#define RECONFIG_GPPSB_LINK_CONFIG (1 << 15)
+#define RECONFIG_GPPSB_ATOMIC_RESET (1 << 17)
+
+/* contents of PCIE_VC0_RESOURCE_STATUS */
+#define VC_NEGOTIATION_PENDING (1 << 1)
+
+#define LC_STATE_RECONFIG_GPPSB 0x10
+
+/* ------------------------------------------------
+* Global variable
+* ------------------------------------------------- */
+extern PCIE_CFG AtiPcieCfg;
+
+/* ----------------- export funtions ----------------- */
+u32 nbmisc_read_index(device_t nb_dev, u32 index);
+void nbmisc_write_index(device_t nb_dev, u32 index, u32 data);
+u32 nbpcie_p_read_index(device_t dev, u32 index);
+void nbpcie_p_write_index(device_t dev, u32 index, u32 data);
+u32 nbpcie_ind_read_index(device_t nb_dev, u32 index);
+void nbpcie_ind_write_index(device_t nb_dev, u32 index, u32 data);
+u32 htiu_read_index(device_t nb_dev, u32 index);
+void htiu_write_index(device_t nb_dev, u32 index, u32 data);
+u32 nbmc_read_index(device_t nb_dev, u32 index);
+void nbmc_write_index(device_t nb_dev, u32 index, u32 data);
+
+u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg);
+void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg, u32 mask, u32 val);
+
+void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val);
+void set_nbcfg_enable_bits_8(device_t nb_dev, u32 reg_pos, u8 mask, u8 val);
+void set_nbmc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val);
+void set_htiu_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val);
+void set_nbmisc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val);
+void set_pcie_enable_bits(device_t dev, u32 reg_pos, u32 mask, u32 val);
+void rs690_set_tom(device_t nb_dev);
+
+void ProgK8TempMmioBase(u8 in_out, u32 pcie_base_add, u32 mmio_base_add);
+void enable_pcie_bar3(device_t nb_dev);
+void disable_pcie_bar3(device_t nb_dev);
+
+void rs690_enable(device_t dev);
+void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port);
+void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port);
+void avoid_lpc_dma_deadlock(device_t nb_dev, device_t sb_dev);
+void config_gpp_core(device_t nb_dev, device_t sb_dev);
+void PcieReleasePortTraining(device_t nb_dev, device_t dev, u32 port);
+u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port);
+#endif /* RS690_H */
diff --git a/src/southbridge/amd/rs690/rs690_cmn.c b/src/southbridge/amd/rs690/rs690_cmn.c
new file mode 100644
index 0000000000..0ed377695e
--- /dev/null
+++ b/src/southbridge/amd/rs690/rs690_cmn.c
@@ -0,0 +1,314 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+
+#include <arch/io.h>
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <boot/coreboot_tables.h>
+#include <delay.h>
+#include "rs690.h"
+
+static u32 nb_read_index(device_t dev, u32 index_reg, u32 index)
+{
+ pci_write_config32(dev, index_reg, index);
+ return pci_read_config32(dev, index_reg + 0x4);
+}
+
+static void nb_write_index(device_t dev, u32 index_reg, u32 index, u32 data)
+{
+
+ pci_write_config32(dev, index_reg, index);
+ pci_write_config32(dev, index_reg + 0x4, data);
+
+}
+
+/* extension registers */
+u32 pci_ext_read_config32(device_t nb_dev, device_t dev, u32 reg)
+{
+ /*get BAR3 base address for nbcfg0x1c */
+ u32 addr = pci_read_config32(nb_dev, 0x1c);
+ printk_debug("addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary,
+ dev->path.u.pci.devfn);
+ addr |= dev->bus->secondary << 20 | /* bus num */
+ dev->path.u.pci.devfn << 12 | reg;
+ return *((u32 *) addr);
+}
+
+void pci_ext_write_config32(device_t nb_dev, device_t dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+
+ /*get BAR3 base address for nbcfg0x1c */
+ u32 addr = pci_read_config32(nb_dev, 0x1c);
+ printk_debug("write: addr=%x,bus=%x,devfn=%x\n", addr, dev->bus->secondary,
+ dev->path.u.pci.devfn);
+ addr |= dev->bus->secondary << 20 | /* bus num */
+ dev->path.u.pci.devfn << 12 | reg_pos;
+
+ reg = reg_old = *((u32 *) addr);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ *((u32 *) addr) = val;
+ }
+}
+
+u32 nbmisc_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBMISC_INDEX, (index));
+}
+
+void nbmisc_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBMISC_INDEX, ((index) | 0x80), (data));
+}
+
+u32 nbpcie_p_read_index(device_t dev, u32 index)
+{
+ return nb_read_index((dev), NBPCIE_INDEX, (index));
+}
+
+void nbpcie_p_write_index(device_t dev, u32 index, u32 data)
+{
+ nb_write_index((dev), NBPCIE_INDEX, (index), (data));
+}
+
+u32 nbpcie_ind_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBPCIE_INDEX, (index));
+}
+
+void nbpcie_ind_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBPCIE_INDEX, (index), (data));
+}
+
+u32 htiu_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBHTIU_INDEX, (index));
+}
+
+void htiu_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBHTIU_INDEX, ((index) | 0x100), (data));
+}
+
+u32 nbmc_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBMC_INDEX, (index));
+}
+
+void nbmc_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBMC_INDEX, ((index) | 1 << 9), (data));
+}
+
+void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = pci_read_config32(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pci_write_config32(nb_dev, reg_pos, reg);
+ }
+}
+
+void set_nbcfg_enable_bits_8(device_t nb_dev, u32 reg_pos, u8 mask, u8 val)
+{
+ u8 reg_old, reg;
+ reg = reg_old = pci_read_config8(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pci_write_config8(nb_dev, reg_pos, reg);
+ }
+}
+
+void set_nbmc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = nbmc_read_index(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ nbmc_write_index(nb_dev, reg_pos, reg);
+ }
+}
+
+void set_htiu_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = htiu_read_index(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ htiu_write_index(nb_dev, reg_pos, reg);
+ }
+}
+
+void set_nbmisc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = nbmisc_read_index(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ nbmisc_write_index(nb_dev, reg_pos, reg);
+ }
+}
+
+void set_pcie_enable_bits(device_t dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = nb_read_index(dev, NBPCIE_INDEX, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ nb_write_index(dev, NBPCIE_INDEX, reg_pos, reg);
+ }
+}
+
+/***********************************************************
+* To access bar3 we need to program PCI MMIO 7 in K8.
+* in_out:
+* 1: enable/enter k8 temp mmio base
+* 0: disable/restore
+***********************************************************/
+void ProgK8TempMmioBase(u8 in_out, u32 pcie_base_add, u32 mmio_base_add)
+{
+ /* K8 Function1 is address map */
+ device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18, 1));
+
+ if (in_out) {
+ pci_write_config32(k8_f1, 0xbc,
+ (((pcie_base_add + 0x10000000 -
+ 1) >> 8) & 0xffffff00) | 0x8);
+ pci_write_config32(k8_f1, 0xb8, (pcie_base_add >> 8) | 0x3);
+ pci_write_config32(k8_f1, 0xb4,
+ ((mmio_base_add + 0x10000000 -
+ 1) >> 8) & 0xffffff00);
+ pci_write_config32(k8_f1, 0xb0, (mmio_base_add >> 8) | 0x3);
+ } else {
+ pci_write_config32(k8_f1, 0xb8, 0);
+ pci_write_config32(k8_f1, 0xbc, 0);
+ pci_write_config32(k8_f1, 0xb0, 0);
+ pci_write_config32(k8_f1, 0xb4, 0);
+ }
+}
+
+void PcieReleasePortTraining(device_t nb_dev, device_t dev, u32 port)
+{
+ switch (port) {
+ case 2: /* GFX, bit4-5 */
+ case 3:
+ set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG,
+ 1 << (port + 2), 0 << (port + 2));
+ break;
+ case 4: /* GPP, bit20-24 */
+ case 5:
+ case 6:
+ case 7:
+ set_nbmisc_enable_bits(nb_dev, PCIE_LINK_CFG,
+ 1 << (port + 17), 0 << (port + 17));
+ break;
+ }
+}
+
+/********************************************************************************************************
+* Output:
+* 0: no device is present.
+* 1: device is present and is trained.
+********************************************************************************************************/
+u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port)
+{
+ u16 count = 5000;
+ u32 lc_state, reg;
+ int8_t current, res = 0;
+
+ while (count--) {
+ mdelay(40);
+ udelay(200);
+ lc_state = nbpcie_p_read_index(dev, 0xa5); /* lc_state */
+ printk_debug("PcieLinkTraining port=%x:lc current state=%x\n",
+ port, lc_state);
+ current = lc_state & 0x3f; /* get LC_CURRENT_STATE, bit0-5 */
+
+ switch (current) {
+ case 0x00: /* 0x00-0x04 means no device is present */
+ case 0x01:
+ case 0x02:
+ case 0x03:
+ case 0x04:
+ res = 0;
+ count = 0;
+ break;
+ case 0x07: /* device is in compliance state (training sequence is doen). Move to train the next device */
+ res = 1; /* TODO: CIM sets it to 0 */
+ count = 0;
+ break;
+ case 0x10:
+ reg =
+ pci_ext_read_config32(nb_dev, dev,
+ PCIE_VC0_RESOURCE_STATUS);
+ printk_debug("PcieTrainPort reg=0x%x\n", reg);
+ /* check bit1 */
+ if (reg & VC_NEGOTIATION_PENDING) { /* bit1=1 means the link needs to be re-trained. */
+ /* set bit8=1, bit0-2=bit4-6 */
+ u32 tmp;
+ reg =
+ nbpcie_p_read_index(dev,
+ PCIE_LC_LINK_WIDTH);
+ tmp = (reg >> 4) && 0x3; /* get bit4-6 */
+ reg &= 0xfff8; /* clear bit0-2 */
+ reg += tmp; /* merge */
+ reg |= 1 << 8;
+ count++; /* CIM said "keep in loop"? */
+ } else {
+ res = 1;
+ count = 0;
+ }
+ break;
+ default: /* reset pcie */
+ res = 0;
+ count = 0; /* break loop */
+ break;
+ }
+ }
+ return res;
+}
+
+/*
+* Compliant with CIM_33's ATINB_SetToms.
+* Set Top Of Memory below and above 4G.
+*/
+void rs690_set_tom(device_t nb_dev)
+{
+ /* set TOM */
+ pci_write_config32(nb_dev, 0x90, uma_memory_start);
+ nbmc_write_index(nb_dev, 0x1e, uma_memory_start);
+}
+
diff --git a/src/southbridge/amd/rs690/rs690_early_setup.c b/src/southbridge/amd/rs690/rs690_early_setup.c
new file mode 100644
index 0000000000..7e11fde5eb
--- /dev/null
+++ b/src/southbridge/amd/rs690/rs690_early_setup.c
@@ -0,0 +1,469 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+
+#define NBHTIU_INDEX 0xA8
+#define NBMISC_INDEX 0x60
+#define NBMC_INDEX 0xE8
+
+static u32 nb_read_index(device_t dev, u32 index_reg, u32 index)
+{
+ pci_write_config32(dev, index_reg, index);
+ return pci_read_config32(dev, index_reg + 0x4);
+}
+
+static void nb_write_index(device_t dev, u32 index_reg, u32 index, u32 data)
+{
+ pci_write_config32(dev, index_reg, index /* | 0x80 */ );
+ pci_write_config32(dev, index_reg + 0x4, data);
+}
+
+static u32 nbmisc_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBMISC_INDEX, (index));
+}
+
+static void nbmisc_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBMISC_INDEX, ((index) | 0x80), (data));
+}
+
+static u32 htiu_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBHTIU_INDEX, (index));
+}
+
+static void htiu_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBHTIU_INDEX, ((index) | 0x100), (data));
+}
+
+static u32 nbmc_read_index(device_t nb_dev, u32 index)
+{
+ return nb_read_index((nb_dev), NBMC_INDEX, (index));
+}
+
+static void nbmc_write_index(device_t nb_dev, u32 index, u32 data)
+{
+ nb_write_index((nb_dev), NBMC_INDEX, ((index) | 1 << 9), (data));
+}
+
+static void set_htiu_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask,
+ u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = htiu_read_index(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ htiu_write_index(nb_dev, reg_pos, reg);
+ }
+}
+
+static void set_nbmisc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask,
+ u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = nbmisc_read_index(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ nbmisc_write_index(nb_dev, reg_pos, reg);
+ }
+}
+
+static void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask,
+ u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = pci_read_config32(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pci_write_config32(nb_dev, reg_pos, reg);
+ }
+}
+
+static void set_nbcfg_enable_bits_8(device_t nb_dev, u32 reg_pos, u8 mask,
+ u8 val)
+{
+ u8 reg_old, reg;
+ reg = reg_old = pci_read_config8(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pci_write_config8(nb_dev, reg_pos, reg);
+ }
+}
+
+static void set_nbmc_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask,
+ u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = nbmc_read_index(nb_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ nbmc_write_index(nb_dev, reg_pos, reg);
+ }
+}
+
+/*
+* Compliant with CIM_33's ATINB_PrepareInit
+*/
+static void get_cpu_rev()
+{
+ u32 eax, ebx, ecx, edx;
+ __asm__ volatile ("cpuid":"=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx)
+ :"0"(1));
+ printk_info("get_cpu_rev EAX=0x%x.\n", eax);
+ if (eax <= 0xfff)
+ printk_info("CPU Rev is K8_Cx.\n");
+ else if (eax <= 0x10fff)
+ printk_info("CPU Rev is K8_Dx.\n");
+ else if (eax <= 0x20fff)
+ printk_info("CPU Rev is K8_Ex.\n");
+ else if (eax <= 0x40fff)
+ printk_info("CPU Rev is K8_Fx.\n");
+ else if (eax == 0x60fb1 || eax == 0x60f81) /*These two IDS are exception, they are G1. */
+ printk_info("CPU Rev is K8_G1.\n");
+ else if (eax <= 0X60FF0)
+ printk_info("CPU Rev is K8_G0.\n");
+ else if (eax <= 0x100000)
+ printk_info("CPU Rev is K8_G1.\n");
+ else
+ printk_info("CPU Rev is K8_10.\n");
+}
+
+static u8 get_nb_rev(device_t nb_dev)
+{
+ u32 reg;
+ reg = pci_read_config32(nb_dev, 0x00);
+ if (0x7911 == (reg >> 16))
+ return 7;
+ reg = pci_read_config8(nb_dev, 0x89); /* copy from CIM, can't find in doc */
+ if (reg & 0x2) /* check bit1 */
+ return 7;
+ if (reg & 0x1) /* check bit0 */
+ return 6;
+ else
+ return 5;
+}
+
+/*****************************************
+* Compliant with CIM_33's ATINB_HTInit
+* Init HT link speed/width for rs690 -- k8 link
+*****************************************/
+static void rs690_htinit()
+{
+ /*
+ * About HT, it has been done in enumerate_ht_chain().
+ */
+ device_t k8_f0;
+ u32 reg;
+ u8 k8_ht_freq;
+
+ k8_f0 = PCI_DEV(0, 0x18, 0);
+ /************************
+ * get k8's ht freq, in k8's function 0, offset 0x88
+ * bit11-8, specifics the maximum operation frequency of the link's transmitter clock.
+ * The link frequency field (Frq) is cleared by cold reset. SW can write a nonzero
+ * value to this reg, and that value takes effect on the next warm reset or
+ * LDTSTOP_L disconnect sequence.
+ * 0000b = 200Mhz
+ * 0010b = 400Mhz
+ * 0100b = 600Mhz
+ * 0101b = 800Mhz
+ * 0110b = 1Ghz
+ * 1111b = 1Ghz
+ ************************/
+ reg = pci_read_config32(k8_f0, 0x88);
+ k8_ht_freq = (reg & 0xf00) >> 8;
+ printk_info("rs690_ht_init k8_ht_freq=%x.\n", k8_ht_freq);
+}
+
+/*******************************************************
+* Optimize k8 with UMA.
+* See BKDG_NPT_0F guide for details.
+* The processor node is addressed by its Node ID on the HT link and can be
+* accessed with a device number in the PCI configuration space on Bus0.
+* The Node ID 0 is mapped to Device 24 (0x18), the Node ID 1 is mapped
+* to Device 25, and so on.
+* The processor implements configuration registers in PCI configuration
+* space using the following four headers
+* Function0: HT technology configuration
+* Function1: Address map configuration
+* Function2: DRAM and HT technology Trace mode configuration
+* Function3: Miscellaneous configuration
+*******************************************************/
+static void k8_optimization()
+{
+ device_t k8_f0, k8_f2, k8_f3;
+ msr_t msr;
+
+ printk_info("k8_optimization()\n");
+ k8_f0 = PCI_DEV(0, 0x18, 0);
+ k8_f2 = PCI_DEV(0, 0x18, 2);
+ k8_f3 = PCI_DEV(0, 0x18, 3);
+
+ pci_write_config32(k8_f0, 0x90, 0x01700178); /* CIM NPT_Optimization */
+ set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 28, 0 << 28);
+ set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 26 | 1 << 27,
+ 1 << 26 | 1 << 27);
+ set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 11, 1 << 11);
+ set_nbcfg_enable_bits(k8_f0, 0x84, 1 << 11 | 1 << 13 | 1 << 15, 1 << 11 | 1 << 13 | 1 << 15); /* TODO */
+
+ pci_write_config32(k8_f3, 0x70, 0x51320111); /* CIM NPT_Optimization */
+ pci_write_config32(k8_f3, 0x74, 0x50304021);
+ pci_write_config32(k8_f3, 0x78, 0x08002A00);
+ if (pci_read_config32(k8_f3, 0xE8) & 0x3<<12)
+ pci_write_config32(k8_f3, 0x7C, 0x0000211B); /* dual core */
+ else
+ pci_write_config32(k8_f3, 0x7C, 0x0000211C); /* single core */
+ set_nbcfg_enable_bits_8(k8_f3, 0xDC, 0xFF, 0x25);
+
+ set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5);
+ set_nbcfg_enable_bits(k8_f2, 0x94, 0xF << 24, 7 << 24);
+ set_nbcfg_enable_bits(k8_f2, 0x90, 1 << 10, 1 << 10);
+ set_nbcfg_enable_bits(k8_f2, 0xA0, 3 << 2, 3 << 2);
+ set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5);
+
+ msr = rdmsr(0xC001001F);
+ msr.lo &= ~(1 << 9);
+ msr.hi &= ~(1 << 4);
+ wrmsr(0xC001001F, msr);
+}
+
+/*****************************************
+* Compliant with CIM_33's ATINB_PCICFG_POR_TABLE
+*****************************************/
+static void rs690_por_pcicfg_init(device_t nb_dev)
+{
+ /* enable PCI Memory Access */
+ set_nbcfg_enable_bits_8(nb_dev, 0x04, (u8)(~0xFD), 0x02);
+ /* Set RCRB Enable */
+ set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x1);
+ /* allow decode of 640k-1MB */
+ set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xEF), 0x10);
+ /* Enable PM2_CNTL(BAR2) IO mapped cfg write access to be broadcast to both NB and SB */
+ set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x4);
+ /* Power Management Register Enable */
+ set_nbcfg_enable_bits_8(nb_dev, 0x84, (u8)(~0xFF), 0x80);
+
+ /* Reg4Ch[1]=1 (APIC_ENABLE) force cpu request with address 0xFECx_xxxx to south-bridge
+ * Reg4Ch[6]=1 (BMMsgEn) enable BM_Set message generation
+ * BMMsgEn */
+ set_nbcfg_enable_bits_8(nb_dev, 0x4C, (u8)(~0x00), 0x42 | 1);
+
+ /* Reg4Ch[16]=1 (WakeC2En) enable Wake_from_C2 message generation.
+ * Reg4Ch[18]=1 (P4IntEnable) Enable north-bridge to accept MSI with address 0xFEEx_xxxx from south-bridge */
+ set_nbcfg_enable_bits_8(nb_dev, 0x4E, (u8)(~0xFF), 0x05);
+ /* Reg94h[4:0] = 0x0 P drive strength offset 0
+ * Reg94h[6:5] = 0x2 P drive strength additive adjust */
+ set_nbcfg_enable_bits_8(nb_dev, 0x94, (u8)(~0x80), 0x40);
+
+ /* Reg94h[20:16] = 0x0 N drive strength offset 0
+ * Reg94h[22:21] = 0x2 N drive strength additive adjust */
+ set_nbcfg_enable_bits_8(nb_dev, 0x96, (u8)(~0x80), 0x40);
+
+ /* Reg80h[4:0] = 0x0 Termination offset
+ * Reg80h[6:5] = 0x2 Termination additive adjust */
+ set_nbcfg_enable_bits_8(nb_dev, 0x80, (u8)(~0x80), 0x40);
+
+ /* Reg80h[14] = 0x1 Enable receiver termination control */
+ set_nbcfg_enable_bits_8(nb_dev, 0x81, (u8)(~0xFF), 0x40);
+
+ /* Reg94h[15] = 0x1 Enables HT transmitter advanced features to be turned on
+ * Reg94h[14] = 0x1 Enable drive strength control */
+ set_nbcfg_enable_bits_8(nb_dev, 0x95, (u8)(~0x3F), 0xC4);
+
+ /* Reg94h[31:29] = 0x7 Enables HT transmitter de-emphasis */
+ set_nbcfg_enable_bits_8(nb_dev, 0x97, (u8)(~0x1F), 0xE0);
+
+ /*Reg8Ch[10:9] = 0x3 Enables Gfx Debug BAR,
+ * force this BAR as mem type in rs690_gfx.c */
+ set_nbcfg_enable_bits_8(nb_dev, 0x8D, (u8)(~0xFF), 0x03);
+
+}
+
+/*****************************************
+* Compliant with CIM_33's ATINB_MCIndex_POR_TABLE
+*****************************************/
+static void rs690_por_mc_index_init(device_t nb_dev)
+{
+ set_nbmc_enable_bits(nb_dev, 0x7A, ~0xFFFFFF80, 0x0000005F);
+ set_nbmc_enable_bits(nb_dev, 0xD8, ~0x00000000, 0x00600060);
+ set_nbmc_enable_bits(nb_dev, 0xD9, ~0x00000000, 0x00600060);
+ set_nbmc_enable_bits(nb_dev, 0xE0, ~0x00000000, 0x00000000);
+ set_nbmc_enable_bits(nb_dev, 0xE1, ~0x00000000, 0x00000000);
+ set_nbmc_enable_bits(nb_dev, 0xE8, ~0x00000000, 0x003E003E);
+ set_nbmc_enable_bits(nb_dev, 0xE9, ~0x00000000, 0x003E003E);
+}
+
+/*****************************************
+* Compliant with CIM_33's ATINB_MISCIND_POR_TABLE
+* Compliant with CIM_33's MISC_INIT_TBL
+*****************************************/
+static void rs690_por_misc_index_init(device_t nb_dev)
+{
+ /* NB_MISC_IND_WR_EN + IOC_PCIE_CNTL
+ * Block non-snoop DMA request if PMArbDis is set.
+ * Set BMSetDis */
+ set_nbmisc_enable_bits(nb_dev, 0x0B, ~0xFFFF0000, 0x00000180);
+ set_nbmisc_enable_bits(nb_dev, 0x01, ~0xFFFFFFFF, 0x00000040);
+
+ /* NBCFG (NBMISCIND 0x0): NB_CNTL -
+ * HIDE_NB_AGP_CAP ([0], default=1)HIDE
+ * HIDE_P2P_AGP_CAP ([1], default=1)HIDE
+ * HIDE_NB_GART_BAR ([2], default=1)HIDE
+ * AGPMODE30 ([4], default=0)DISABLE
+ * AGP30ENCHANCED ([5], default=0)DISABLE
+ * HIDE_AGP_CAP ([8], default=1)ENABLE */
+ set_nbmisc_enable_bits(nb_dev, 0x00, ~0xFFFF0000, 0x00000506); /* set bit 10 for MSI */
+
+ /* NBMISCIND:0x6A[16]= 1 SB link can get a full swing
+ * set_nbmisc_enable_bits(nb_dev, 0x6A, 0ffffffffh, 000010000);
+ * NBMISCIND:0x6A[17]=1 Set CMGOOD_OVERRIDE. */
+ set_nbmisc_enable_bits(nb_dev, 0x6A, ~0xffffffff, 0x00020000);
+
+ /* NBMISIND:0x40 Bit[8]=1 and Bit[10]=1 following bits are required to set in order to allow LVDS or PWM features to work. */
+ set_nbmisc_enable_bits(nb_dev, 0x40, ~0xffffffff, 0x00000500);
+
+ /* NBMISIND:0xC Bit[13]=1 Enable GSM mode for C1e or C3 with pop-up. */
+ set_nbmisc_enable_bits(nb_dev, 0x0C, ~0xffffffff, 0x00002000);
+
+ /* Set NBMISIND:0x1F[3] to map NB F2 interrupt pin to INTB# */
+ set_nbmisc_enable_bits(nb_dev, 0x1F, ~0xffffffff, 0x00000008);
+
+ /* Compliant with CIM_33's MISC_INIT_TBL, except Hide NB_BAR3_PCIE
+ * Enable access to DEV8
+ * Enable setPower message for all ports
+ */
+ set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, 1 << 6);
+ set_nbmisc_enable_bits(nb_dev, 0x0b, 1 << 20, 1 << 20);
+ set_nbmisc_enable_bits(nb_dev, 0x51, 1 << 20, 1 << 20);
+ set_nbmisc_enable_bits(nb_dev, 0x53, 1 << 20, 1 << 20);
+ set_nbmisc_enable_bits(nb_dev, 0x55, 1 << 20, 1 << 20);
+ set_nbmisc_enable_bits(nb_dev, 0x57, 1 << 20, 1 << 20);
+ set_nbmisc_enable_bits(nb_dev, 0x59, 1 << 20, 1 << 20);
+ set_nbmisc_enable_bits(nb_dev, 0x5B, 1 << 20, 1 << 20);
+
+ set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 7, 1 << 7);
+ set_nbmisc_enable_bits(nb_dev, 0x07, 0x000000f0, 0x30);
+ /* Disable bus-master trigger event from SB and Enable set_slot_power message to SB */
+ set_nbmisc_enable_bits(nb_dev, 0x0B, 0xffffffff, 0x500180);
+}
+
+/*****************************************
+* Compliant with CIM_33's ATINB_HTIUNBIND_POR_TABLE
+*****************************************/
+static void rs690_por_htiu_index_init(device_t nb_dev)
+{
+ /* 0xBC:
+ * Enables GSM mode for C1e or C3 with pop-up
+ * Prevents AllowLdtStop from being asserted during HT link recovery
+ * Allows FID cycles to be serviced faster. Needed for RS690 A12. No harm in RS690 A11 */
+ set_htiu_enable_bits(nb_dev, 0x05, ~0xffffffff, 0x0BC);
+ /* 0x4203A202:
+ * Enables writes to pass in-progress reads
+ * Enables streaming of CPU writes
+ * Enables extended write buffer for CPU writes
+ * Enables additional response buffers
+ * Enables special reads to pass writes
+ * Enables decoding of C1e/C3 and FID cycles
+ * Enables HTIU-display handshake bypass.
+ * Enables tagging fix */
+ set_htiu_enable_bits(nb_dev, 0x06, ~0xFFFFFFFE, 0x4203A202);
+
+ /* Enables byte-write optimization for IOC requests
+ * Disables delaying STPCLK de-assert during FID sequence. Needed when enhanced UMA arbitration is used.
+ * Disables upstream system-management delay */
+ set_htiu_enable_bits(nb_dev, 0x07, ~0xFFFFFFF9, 0x001);
+
+ /* HTIUNBIND 0x16 [1] = 0x1 Enable crc decoding fix */
+ set_htiu_enable_bits(nb_dev, 0x16, ~0xFFFFFFFF, 0x2);
+}
+
+/*****************************************
+* Compliant with CIM_33's ATINB_POR_INIT_JMPDI
+* Configure RS690 registers to power-on default RPR.
+* POR: Power On Reset
+* RPR: Register Programming Requirements
+*****************************************/
+static void rs690_por_init(device_t nb_dev)
+{
+ printk_info("rs690_por_init\n");
+ /* ATINB_PCICFG_POR_TABLE, initialize the values for rs690 PCI Config registers */
+ rs690_por_pcicfg_init(nb_dev);
+
+ /* ATINB_MCIND_POR_TABLE */
+ rs690_por_mc_index_init(nb_dev);
+
+ /* ATINB_MISCIND_POR_TABLE */
+ rs690_por_misc_index_init(nb_dev);
+
+ /* ATINB_HTIUNBIND_POR_TABLE */
+ rs690_por_htiu_index_init(nb_dev);
+
+ /* ATINB_CLKCFG_PORT_TABLE */
+ /* rs690 A11 SB Link full swing? */
+}
+
+/* enable CFG access to Dev8, which is the SB P2P Bridge */
+static void enable_rs690_dev8()
+{
+ set_nbmisc_enable_bits(PCI_DEV(0, 0, 0), 0x00, 1 << 6, 1 << 6);
+}
+
+
+
+/*
+* Compliant with CIM_33's AtiNBInitEarlyPost (AtiInitNBBeforePCIInit).
+*/
+static void rs690_before_pci_init()
+{
+}
+
+/*
+* The calling sequence is same as CIM.
+*/
+static void rs690_early_setup()
+{
+ device_t nb_dev = PCI_DEV(0, 0, 0);
+ printk_info("rs690_early_setup()\n");
+
+ /*ATINB_PrepareInit */
+ get_cpu_rev();
+ switch (get_nb_rev(nb_dev)) { /* PCIEMiscInit */
+ case 5:
+ printk_info("NB Revision is A11.\n");
+ break;
+ case 6:
+ printk_info("NB Revision is A12.\n");
+ break;
+ case 7:
+ printk_info("NB Revision is A21.\n");
+ break;
+ }
+
+ rs690_htinit();
+ k8_optimization();
+ rs690_por_init(nb_dev);
+}
diff --git a/src/southbridge/amd/rs690/rs690_gfx.c b/src/southbridge/amd/rs690/rs690_gfx.c
new file mode 100644
index 0000000000..9b5929611b
--- /dev/null
+++ b/src/southbridge/amd/rs690/rs690_gfx.c
@@ -0,0 +1,582 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * for rs690 internal graphics device
+ * device id of internal grphics:
+ * RS690M/T: 0x791f
+ * RS690: 0x791e
+ */
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <delay.h>
+#include "rs690.h"
+
+#define CLK_CNTL_INDEX 0x8
+#define CLK_CNTL_DATA 0xC
+
+static u32 clkind_read(device_t dev, u32 index)
+{
+ u32 gfx_bar2 = pci_read_config32(dev, 0x18) & ~0xF;
+
+ *(u32*)(gfx_bar2+CLK_CNTL_INDEX) = index & 0x7F;
+ return *(u32*)(gfx_bar2+CLK_CNTL_DATA);
+}
+
+static void clkind_write(device_t dev, u32 index, u32 data)
+{
+ u32 gfx_bar2 = pci_read_config32(dev, 0x18) & ~0xF;
+ /* printk_info("gfx bar 2 %02x\n", gfx_bar2); */
+
+ *(u32*)(gfx_bar2+CLK_CNTL_INDEX) = index | 1<<7;
+ *(u32*)(gfx_bar2+CLK_CNTL_DATA) = data;
+}
+
+/*
+* pci_dev_read_resources thinks it is a IO type.
+* We have to force it to mem type.
+*/
+static void rs690_gfx_read_resources(device_t dev)
+{
+ printk_info("rs690_gfx_read_resources.\n");
+
+ /* The initial value of 0x24 is 0xFFFFFFFF, which is confusing.
+ Even if we write 0xFFFFFFFF into it, it will be 0xFFF00000,
+ which tells us it is a memory address base.
+ */
+ pci_write_config32(dev, 0x24, 0x00000000);
+
+ /* Get the normal pci resources of this device */
+ pci_dev_read_resources(dev);
+ compact_resources(dev);
+}
+
+static void internal_gfx_pci_dev_init(struct device *dev)
+{
+ unsigned short deviceid, vendorid;
+ struct southbridge_amd_rs690_config *cfg =
+ (struct southbridge_amd_rs690_config *)dev->chip_info;
+ deviceid = pci_read_config16(dev, PCI_DEVICE_ID);
+ vendorid = pci_read_config16(dev, PCI_VENDOR_ID);
+ printk_info("internal_gfx_pci_dev_init device=%x, vendor=%x, vga_rom_address=0x%x.\n",
+ deviceid, vendorid, cfg->vga_rom_address);
+
+#if 0 /* I think these should be done in Config.lb. Please check it. */
+ dev->on_mainboard = 1;
+ dev->rom_address = cfg->vga_rom_address; /* 0xfff00000; */
+#endif
+ pci_dev_init(dev);
+
+ /* clk ind */
+ clkind_write(dev, 0x08, 0x01);
+ clkind_write(dev, 0x0C, 0x22);
+ clkind_write(dev, 0x0F, 0x0);
+ clkind_write(dev, 0x11, 0x0);
+ clkind_write(dev, 0x12, 0x0);
+ clkind_write(dev, 0x14, 0x0);
+ clkind_write(dev, 0x15, 0x0);
+ clkind_write(dev, 0x16, 0x0);
+ clkind_write(dev, 0x17, 0x0);
+ clkind_write(dev, 0x18, 0x0);
+ clkind_write(dev, 0x19, 0x0);
+ clkind_write(dev, 0x1A, 0x0);
+ clkind_write(dev, 0x1B, 0x0);
+ clkind_write(dev, 0x1C, 0x0);
+ clkind_write(dev, 0x1D, 0x0);
+ clkind_write(dev, 0x1E, 0x0);
+ clkind_write(dev, 0x26, 0x0);
+ clkind_write(dev, 0x27, 0x0);
+ clkind_write(dev, 0x28, 0x0);
+ clkind_write(dev, 0x5C, 0x0);
+}
+
+static void rs690_gfx_set_resources(struct device *dev)
+{
+ printk_info("rs690_gfx_set_resources.\n");
+ pci_dev_set_resources(dev);
+}
+
+/*
+* Set registers in RS690 and CPU to enable the internal GFX.
+* Please refer to CIM source code and BKDG.
+*/
+static void rs690_internal_gfx_enable(device_t dev)
+{
+ u32 l_dword;
+ int i;
+ device_t k8_f0 = 0, k8_f2 = 0;
+ device_t nb_dev = dev_find_slot(0, 0);
+
+ printk_info("rs690_internal_gfx_enable dev=0x%x, nb_dev=0x%x.\n", dev,
+ nb_dev);
+
+ /* set APERTURE_SIZE, 128M. */
+ l_dword = pci_read_config32(nb_dev, 0x8c);
+ printk_info("nb_dev, 0x8c=0x%x\n", l_dword);
+ l_dword &= 0xffffff8f;
+ pci_write_config32(nb_dev, 0x8c, l_dword);
+
+ /* set TOM */
+ rs690_set_tom(nb_dev);
+
+ /* LPC DMA Deadlock workaround? */
+ k8_f0 = dev_find_slot(0, PCI_DEVFN(0x18, 0));
+ l_dword = pci_read_config32(k8_f0, 0x68);
+ l_dword &= ~(1 << 22);
+ l_dword |= (1 << 21);
+ pci_write_config32(k8_f0, 0x68, l_dword);
+
+ /* Enable 64bit mode. */
+ set_nbmc_enable_bits(nb_dev, 0x5f, 0, 1 << 9);
+ set_nbmc_enable_bits(nb_dev, 0xb0, 0, 1 << 8);
+
+ /* 64bit Latency. */
+ set_nbmc_enable_bits(nb_dev, 0x5f, 0x7c00, 0x800);
+
+ /* UMA dual channel control register. */
+ nbmc_write_index(nb_dev, 0x86, 0x3d);
+
+ /* check the setting later!! */
+ set_htiu_enable_bits(nb_dev, 0x07, 1 << 7, 0);
+
+ /* UMA mode, powerdown memory PLL. */
+ set_nbmc_enable_bits(nb_dev, 0x74, 0, 1 << 31);
+
+ /* Copy CPU DDR Controller to NB MC. */
+ /* Why K8_MC_REG80 is special? */
+ k8_f2 = dev_find_slot(0, PCI_DEVFN(0x18, 2));
+ for (i = 0; i <= (0x80 - 0x40) / 4; i++) {
+ l_dword = pci_read_config32(k8_f2, 0x40 + i * 4);
+ nbmc_write_index(nb_dev, 0x63 + i, l_dword);
+ }
+
+ /* Set K8 MC for UMA, Family F. */
+ l_dword = pci_read_config32(k8_f2, 0xa0);
+ l_dword |= 0x2c;
+ pci_write_config32(k8_f2, 0xa0, l_dword);
+ l_dword = pci_read_config32(k8_f2, 0x94);
+ l_dword &= 0xf0ffffff;
+ l_dword |= 0x07000000;
+ pci_write_config32(k8_f2, 0x94, l_dword);
+
+ /* set FB size and location. */
+ nbmc_write_index(nb_dev, 0x1b, 0x00);
+ l_dword = nbmc_read_index(nb_dev, 0x1c);
+ l_dword &= 0xffff0;
+ l_dword |= 0x400 << 20;
+ l_dword |= 0x4;
+ nbmc_write_index(nb_dev, 0x1c, l_dword);
+ l_dword = nbmc_read_index(nb_dev, 0x1d);
+ l_dword &= 0xfffff000;
+ l_dword |= 0x0400;
+ nbmc_write_index(nb_dev, 0x1d, l_dword);
+ nbmc_write_index(nb_dev, 0x100, 0x3fff3800);
+
+ /* Program MC table. */
+ set_nbmc_enable_bits(nb_dev, 0x00, 0, 1 << 31);
+ l_dword = nbmc_read_index(nb_dev, 0x91);
+ l_dword |= 0x5;
+ nbmc_write_index(nb_dev, 0x91, l_dword);
+ set_nbmc_enable_bits(nb_dev, 0xb1, 0, 1 << 6);
+ set_nbmc_enable_bits(nb_dev, 0xc3, 0, 1);
+
+ /* TODO: the optimization of voltage and frequency */
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations ht_ops = {
+ .read_resources = rs690_gfx_read_resources,
+ .set_resources = rs690_gfx_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = internal_gfx_pci_dev_init, /* The option ROM initializes the device. rs690_gfx_init, */
+ .scan_bus = 0,
+ .enable = rs690_internal_gfx_enable,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver internal_gfx_driver __pci_driver = {
+ .ops = &ht_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_RS690MT_INT_GFX,
+};
+
+/* step 12 ~ step 14 from rpr */
+static void single_port_configuration(device_t nb_dev, device_t dev)
+{
+ u8 result, width;
+ u32 reg32;
+ struct southbridge_amd_rs690_config *cfg =
+ (struct southbridge_amd_rs690_config *)nb_dev->chip_info;
+
+ printk_info("rs690_gfx_init single_port_configuration.\n");
+
+ /* step 12 training, releases hold training for GFX port 0 (device 2) */
+ set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0<<4);
+ PcieReleasePortTraining(nb_dev, dev, 2);
+ result = PcieTrainPort(nb_dev, dev, 2);
+ printk_info("rs690_gfx_init single_port_configuration step12.\n");
+
+ /* step 13 Power Down Control */
+ /* step 13.1 Enables powering down transmitter and receiver pads along with PLL macros. */
+ set_pcie_enable_bits(nb_dev, 0x40, 1 << 0, 1 << 0);
+
+ /* step 13.a Link Training was NOT successful */
+ if (!result) {
+ set_nbmisc_enable_bits(nb_dev, 0x8, 0, 0x3 << 4); /* prevent from training. */
+ set_nbmisc_enable_bits(nb_dev, 0xc, 0, 0x3 << 2); /* hide the GFX bridge. */
+ if (cfg->gfx_tmds)
+ nbpcie_ind_write_index(nb_dev, 0x65, 0xccf0f0);
+ else {
+ nbpcie_ind_write_index(nb_dev, 0x65, 0xffffffff);
+ set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 3, 1 << 3);
+ }
+ } else { /* step 13.b Link Training was successful */
+
+ reg32 = nbpcie_p_read_index(dev, 0xa2);
+ width = (reg32 >> 4) & 0x7;
+ printk_debug("GFX LC_LINK_WIDTH = 0x%x.\n", width);
+ switch (width) {
+ case 1:
+ case 2:
+ nbpcie_ind_write_index(nb_dev, 0x65,
+ cfg->gfx_lane_reversal ? 0x7f7f : 0xccfefe);
+ break;
+ case 4:
+ nbpcie_ind_write_index(nb_dev, 0x65,
+ cfg->gfx_lane_reversal ? 0x3f3f : 0xccfcfc);
+ break;
+ case 8:
+ nbpcie_ind_write_index(nb_dev, 0x65,
+ cfg->gfx_lane_reversal ? 0x0f0f : 0xccf0f0);
+ break;
+ }
+ }
+ printk_info("rs690_gfx_init single_port_configuration step13.\n");
+
+ /* step 14 Reset Enumeration Timer, disables the shortening of the enumeration timer */
+ set_pcie_enable_bits(dev, 0x70, 1 << 19, 0 << 19);
+ printk_info("rs690_gfx_init single_port_configuration step14.\n");
+}
+
+/* step 15 ~ step 18 from rpr */
+static void dual_port_configuration(device_t nb_dev, device_t dev)
+{
+ u8 result, width;
+ u32 reg32;
+ struct southbridge_amd_rs690_config *cfg =
+ (struct southbridge_amd_rs690_config *)nb_dev->chip_info;
+
+ /* step 15: Training for Device 2 */
+ set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0 << 4);
+ /* Releases hold training for GFX port 0 (device 2) */
+ PcieReleasePortTraining(nb_dev, dev, 2);
+ /* PCIE Link Training Sequence */
+ result = PcieTrainPort(nb_dev, dev, 2);
+
+ /* step 16: Power Down Control for Device 2 */
+ /* step 16.a Link Training was NOT successful */
+ if (!result) {
+ /* Powers down all lanes for port A */
+ nbpcie_ind_write_index(nb_dev, 0x65, 0x0f0f);
+ } else { /* step 16.b Link Training was successful */
+
+ reg32 = nbpcie_p_read_index(dev, 0xa2);
+ width = (reg32 >> 4) & 0x7;
+ printk_debug("GFX LC_LINK_WIDTH = 0x%x.\n", width);
+ switch (width) {
+ case 1:
+ case 2:
+ nbpcie_ind_write_index(nb_dev, 0x65,
+ cfg->gfx_lane_reversal ? 0x0707 : 0x0e0e);
+ break;
+ case 4:
+ nbpcie_ind_write_index(nb_dev, 0x65,
+ cfg->gfx_lane_reversal ? 0x0303 : 0x0c0c);
+ break;
+ }
+ }
+
+ /* step 17: Training for Device 3 */
+ set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 5, 0 << 5);
+ /* Releases hold training for GFX port 0 (device 3) */
+ PcieReleasePortTraining(nb_dev, dev, 3);
+ /* PCIE Link Training Sequence */
+ result = PcieTrainPort(nb_dev, dev, 3);
+
+ /*step 18: Power Down Control for Device 3 */
+ /* step 18.a Link Training was NOT successful */
+ if (!result) {
+ /* Powers down all lanes for port B and PLL1 */
+ nbpcie_ind_write_index(nb_dev, 0x65, 0xccf0f0);
+ } else { /* step 18.b Link Training was successful */
+
+ reg32 = nbpcie_p_read_index(dev, 0xa2);
+ width = (reg32 >> 4) & 0x7;
+ printk_debug("GFX LC_LINK_WIDTH = 0x%x.\n", width);
+ switch (width) {
+ case 1:
+ case 2:
+ nbpcie_ind_write_index(nb_dev, 0x65,
+ cfg->gfx_lane_reversal ? 0x7070 : 0xe0e0);
+ break;
+ case 4:
+ nbpcie_ind_write_index(nb_dev, 0x65,
+ cfg->gfx_lane_reversal ? 0x3030 : 0xc0c0);
+ break;
+ }
+ }
+}
+
+
+/* For single port GFX configuration Only
+* width:
+* 000 = x16
+* 001 = x1
+* 010 = x2
+* 011 = x4
+* 100 = x8
+* 101 = x12 (not supported)
+* 110 = x16
+*/
+static void dynamic_link_width_control(device_t nb_dev, device_t dev, u8 width)
+{
+ u32 reg32;
+ device_t sb_dev;
+ struct southbridge_amd_rs690_config *cfg =
+ (struct southbridge_amd_rs690_config *)nb_dev->chip_info;
+
+ /* step 5.9.1.1 */
+ reg32 = nbpcie_p_read_index(dev, 0xa2);
+
+ /* step 5.9.1.2 */
+ set_pcie_enable_bits(nb_dev, 0x40, 1 << 0, 1 << 0);
+ /* step 5.9.1.3 */
+ set_pcie_enable_bits(dev, 0xa2, 3 << 0, width << 0);
+ /* step 5.9.1.4 */
+ set_pcie_enable_bits(dev, 0xa2, 1 << 8, 1 << 8);
+ /* step 5.9.2.4 */
+ if (0 == cfg->gfx_reconfiguration)
+ set_pcie_enable_bits(dev, 0xa2, 1 << 11, 1 << 11);
+
+ /* step 5.9.1.5 */
+ do {
+ reg32 = nbpcie_p_read_index(dev, 0xa2);
+ }
+ while (reg32 & 0x100);
+
+ /* step 5.9.1.6 */
+ sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0));
+ do {
+ reg32 = pci_ext_read_config32(nb_dev, sb_dev,
+ PCIE_VC0_RESOURCE_STATUS);
+ } while (reg32 & VC_NEGOTIATION_PENDING);
+
+ /* step 5.9.1.7 */
+ reg32 = nbpcie_p_read_index(dev, 0xa2);
+ if (((reg32 & 0x70) >> 4) != 0x6) {
+ /* the unused lanes should be powered off. */
+ }
+
+ /* step 5.9.1.8 */
+ set_pcie_enable_bits(nb_dev, 0x40, 1 << 0, 0 << 0);
+}
+
+/*
+* GFX Core initialization, dev2, dev3
+*/
+void rs690_gfx_init(device_t nb_dev, device_t dev, u32 port)
+{
+ u16 reg16;
+ struct southbridge_amd_rs690_config *cfg =
+ (struct southbridge_amd_rs690_config *)nb_dev->chip_info;
+
+ printk_info("rs690_gfx_init, nb_dev=0x%x, dev=0x%x, port=0x%x.\n",
+ nb_dev, dev, port);
+
+ /* step 0, REFCLK_SEL, skip A11 revision */
+ set_nbmisc_enable_bits(nb_dev, 0x6a, 1 << 9,
+ cfg->gfx_dev2_dev3 ? 1 << 9 : 0 << 9);
+ printk_info("rs690_gfx_init step0.\n");
+
+ /* step 1, lane reversal (only need if CMOS option is enabled) */
+ if (cfg->gfx_lane_reversal) {
+ set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 2, 1 << 2);
+ if (cfg->gfx_dual_slot)
+ set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 3, 1 << 3);
+ }
+ printk_info("rs690_gfx_init step1.\n");
+
+ /* step 1.1, dual-slot gfx configuration (only need if CMOS option is enabled) */
+ /* AMD calls the configuration CrossFire */
+ if (cfg->gfx_dual_slot)
+ set_nbmisc_enable_bits(nb_dev, 0x0, 0xf << 8, 5 << 8);
+ printk_info("rs690_gfx_init step2.\n");
+
+ /* step 2, TMDS, (only need if CMOS option is enabled) */
+ if (cfg->gfx_tmds) {
+ }
+
+ /* step 3, GFX overclocking, (only need if CMOS option is enabled) */
+ /* skip */
+
+ /* step 4, reset the GFX link */
+ /* step 4.1 asserts both calibration reset and global reset */
+ set_nbmisc_enable_bits(nb_dev, 0x8, 0x3 << 14, 0x3 << 14);
+
+ /* step 4.2 de-asserts calibration reset */
+ set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 14, 0 << 14);
+
+ /* step 4.3 wait for at least 200us */
+ udelay(200);
+
+ /* step 4.4 de-asserts global reset */
+ set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 15, 0 << 15);
+
+ /* step 4.5 asserts both calibration reset and global reset */
+ /* a weird step in RPR, don't do that */
+ /* set_nbmisc_enable_bits(nb_dev, 0x8, 0x3 << 14, 0x3 << 14); */
+
+ /* step 4.6 bring external GFX device out of reset, wait for 1ms */
+ mdelay(1);
+ printk_info("rs690_gfx_init step4.\n");
+
+ /* step 5 program PCIE memory mapped configuration space */
+ /* done by enable_pci_bar3() before */
+
+ /* step 6 SBIOS compile flags */
+
+ /* step 7 compliance state, (only need if CMOS option is enabled) */
+ /* the compliance stete is just for test. refer to 4.2.5.2 of PCIe specification */
+ if (cfg->gfx_compliance) {
+ /* force compliance */
+ set_nbmisc_enable_bits(nb_dev, 0x32, 1 << 6, 1 << 6);
+ /* release hold training for device 2. GFX initialization is done. */
+ set_nbmisc_enable_bits(nb_dev, 0x8, 1 << 4, 0 << 4);
+ dynamic_link_width_control(nb_dev, dev, cfg->gfx_link_width);
+ printk_info("rs690_gfx_init step7.\n");
+ return;
+ }
+
+ /* step 8 common initialization */
+ /* step 8.1 sets RCB timeout to be 25ms */
+ set_pcie_enable_bits(dev, 0x70, 7 << 16, 3 << 16);
+ printk_info("rs690_gfx_init step8.1.\n");
+
+ /* step 8.2 disables slave ordering logic */
+ set_pcie_enable_bits(nb_dev, 0x20, 1 << 8, 1 << 8);
+ printk_info("rs690_gfx_init step8.2.\n");
+
+ /* step 8.3 sets DMA payload size to 64 bytes */
+ set_pcie_enable_bits(nb_dev, 0x10, 7 << 10, 4 << 10);
+ printk_info("rs690_gfx_init step8.3.\n");
+
+ /* step 8.4 if the LTSSM could not see all 8 TS1 during Polling Active, it can still
+ * time out and go back to Detect Idle.*/
+ set_pcie_enable_bits(dev, 0x02, 1 << 14, 1 << 14);
+ printk_info("rs690_gfx_init step8.4.\n");
+
+ /* step 8.5 shortens the enumeration timer */
+ set_pcie_enable_bits(dev, 0x70, 1 << 19, 1 << 19);
+ printk_info("rs690_gfx_init step8.5.\n");
+
+ /* step 8.6 blocks DMA traffic during C3 state */
+ set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0);
+ printk_info("rs690_gfx_init step8.6.\n");
+
+ /* step 8.7 Do not gate the electrical idle form the PHY
+ * step 8.8 Enables the escape from L1L23 */
+ set_pcie_enable_bits(dev, 0xa0, 3 << 30, 3 << 30);
+ printk_info("rs690_gfx_init step8.8.\n");
+
+ /* step 8.9 Setting this register to 0x1 will workaround a PCI Compliance failure reported by Vista DTM.
+ * SLOT_IMPLEMENTED@PCIE_CAP */
+ reg16 = pci_read_config16(dev, 0x5a);
+ reg16 |= 0x100;
+ pci_write_config16(dev, 0x5a, reg16);
+ printk_info("rs690_gfx_init step8.9.\n");
+
+ /* step 8.10 Setting this register to 0x1 will hide the Advanced Error Rporting Capabilities in the PCIE Brider.
+ * This will workaround several failures reported by the PCI Compliance test under Vista DTM. */
+ set_nbmisc_enable_bits(nb_dev, 0x33, 1 << 31, 0 << 31);
+ printk_info("rs690_gfx_init step8.10.\n");
+
+ /* step 8.11 Sets REGS_DLP_IGNORE_IN_L1_EN to ignore DLLPs during L1 so that txclk can be turned off. */
+ set_pcie_enable_bits(nb_dev, 0x02, 1 << 0, 1 << 0);
+ printk_info("rs690_gfx_init step8.11.\n");
+
+ /* step 8.12 Sets REGS_LC_DONT_GO_TO_L0S_IF_L1_ARMED to prevent lc to go to from L0 to Rcv_L0s if L1 is armed. */
+ set_pcie_enable_bits(nb_dev, 0x02, 1 << 6, 1 << 6);
+ printk_info("rs690_gfx_init step8.12.\n");
+
+ /* step 8.13 Sets CMGOOD_OVERRIDE. */
+ set_nbmisc_enable_bits(nb_dev, 0x6a, 1 << 17, 1 << 17);
+ printk_info("rs690_gfx_init step8.13.\n");
+
+ /* step 9 Enable TLP Flushing, for non-AMD GFX devices and Hot-Plug devices only. */
+ /* skip */
+
+ /* step 10 Optional Features, only needed if CMOS option is enabled. */
+ /* step 10.a: L0s */
+ /* enabling L0s in the RS690 GFX port(s) */
+ set_pcie_enable_bits(nb_dev, 0xF9, 3 << 13, 2 << 13);
+ set_pcie_enable_bits(dev, 0xA0, 0xf << 8, 8 << 8);
+ reg16 = pci_read_config16(dev, 0x68);
+ reg16 |= 1 << 0;
+ /* L0s is intended as a power saving state */
+ /* pci_write_config16(dev, 0x68, reg16); */
+
+ /* enabling L0s in the External GFX Device(s) */
+
+ /* step 10.b: active state power management (ASPM L1) */
+ /* TO DO */
+
+ /* step 10.c: turning off PLL During L1/L23 */
+ set_pcie_enable_bits(nb_dev, 0x40, 1 << 3, 1 << 3);
+ set_pcie_enable_bits(nb_dev, 0x40, 1 << 9, 1 << 9);
+
+ /* step 10.d: TXCLK clock gating */
+ set_nbmisc_enable_bits(nb_dev, 0x7, 3, 3);
+ set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 22, 1 << 22);
+ set_pcie_enable_bits(nb_dev, 0x11, 0xf << 4, 0xc << 4);
+
+ /* step 10.e: LCLK clock gating, done in rs690_config_misc_clk() */
+
+ /* step 11 Poll GPIO to determine whether it is single-port or dual-port configuration.
+ * While details will be added later in the document, for now assue the single-port configuration. */
+ /* skip */
+
+ /* Single-port/Dual-port configureation. */
+ switch (cfg->gfx_dual_slot) {
+ case 0:
+ single_port_configuration(nb_dev, dev);
+ break;
+ case 1:
+ dual_port_configuration(nb_dev, dev);
+ break;
+ default:
+ printk_info("Incorrect configuration of external gfx slot.\n");
+ break;
+ }
+}
diff --git a/src/southbridge/amd/rs690/rs690_ht.c b/src/southbridge/amd/rs690/rs690_ht.c
new file mode 100644
index 0000000000..808a7225a5
--- /dev/null
+++ b/src/southbridge/amd/rs690/rs690_ht.c
@@ -0,0 +1,90 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "rs690.h"
+
+/* for UMA internal graphics */
+void avoid_lpc_dma_deadlock(device_t nb_dev, device_t sb_dev)
+{
+ device_t k8_f0;
+ u8 reg;
+
+ k8_f0 = dev_find_slot(0, PCI_DEVFN(0x18, 0));
+ set_nbcfg_enable_bits(k8_f0, 0x68, 3 << 21, 1 << 21);
+
+ reg = nbpcie_p_read_index(sb_dev, 0x10);
+ reg |= 0x100; /* bit9=1 */
+ nbpcie_p_write_index(sb_dev, 0x10, reg);
+
+ reg = nbpcie_p_read_index(nb_dev, 0x10);
+ reg |= 0x100; /* bit9=1 */
+ nbpcie_p_write_index(nb_dev, 0x10, reg);
+
+ /* Enable NP protocol over PCIE for memory-mapped writes targeting LPC
+ * Set this bit to avoid a deadlock condition. */
+ reg = htiu_read_index(nb_dev, 0x6);
+ reg |= 0x1000000; /* bit26 */
+ htiu_write_index(nb_dev, 0x6, reg);
+}
+
+static void pcie_init(struct device *dev)
+{
+ /* Enable pci error detecting */
+ u32 dword;
+
+ printk_info("pcie_init in rs690_ht.c\n");
+
+ /* System error enable */
+ dword = pci_read_config32(dev, 0x04);
+ dword |= (1 << 8); /* System error enable */
+ dword |= (1 << 30); /* Clear possible errors */
+ pci_write_config32(dev, 0x04, dword);
+
+ /*
+ * 1 is APIC enable
+ * 18 is enable nb to accept A4 interrupt request from SB.
+ */
+ dword = pci_read_config32(dev, 0x4C);
+ dword |= 1 << 1 | 1 << 18; /* Clear possible errors */
+ pci_write_config32(dev, 0x4C, dword);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = pci_dev_set_subsystem,
+};
+
+static struct device_operations ht_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = pcie_init,
+ .scan_bus = 0,
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver ht_driver __pci_driver = {
+ .ops = &ht_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_RS690_HT,
+};
diff --git a/src/southbridge/amd/rs690/rs690_pcie.c b/src/southbridge/amd/rs690/rs690_pcie.c
new file mode 100644
index 0000000000..7b09a935d9
--- /dev/null
+++ b/src/southbridge/amd/rs690/rs690_pcie.c
@@ -0,0 +1,422 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <delay.h>
+#include "rs690.h"
+
+/*------------------------------------------------
+* Global variable
+------------------------------------------------*/
+PCIE_CFG AtiPcieCfg = {
+ PCIE_ENABLE_STATIC_DEV_REMAP, /* Config */
+ 0, /* ResetReleaseDelay */
+ 0, /* Gfx0Width */
+ 0, /* Gfx1Width */
+ 0, /* GfxPayload */
+ 0, /* GppPayload */
+ 0, /* PortDetect, filled by GppSbInit */
+ 0, /* PortHp */
+ 0, /* DbgConfig */
+ 0, /* DbgConfig2 */
+ 0, /* GfxLx */
+ 0, /* GppLx */
+ 0, /* NBSBLx */
+ 0, /* PortSlotInit */
+ 0, /* Gfx0Pwr */
+ 0, /* Gfx1Pwr */
+ 0 /* GppPwr */
+};
+
+static void PciePowerOffGppPorts(device_t nb_dev, device_t dev, u32 port);
+static void ValidatePortEn(device_t nb_dev);
+
+static void ValidatePortEn(device_t nb_dev)
+{
+}
+
+
+/*****************************************************************
+* Compliant with CIM_33's PCIEPowerOffGppPorts
+* Power off unused GPP lines
+*****************************************************************/
+static void PciePowerOffGppPorts(device_t nb_dev, device_t dev, u32 port)
+{
+ u32 reg;
+ u16 state_save;
+ struct southbridge_amd_rs690_config *cfg =
+ (struct southbridge_amd_rs690_config *)nb_dev->chip_info;
+ u8 state = cfg->port_enable;
+
+ if (!(AtiPcieCfg.Config & PCIE_DISABLE_HIDE_UNUSED_PORTS))
+ state &= AtiPcieCfg.PortDetect;
+ state = ~state;
+ state &= (1 << 4) + (1 << 5) + (1 << 6) + (1 << 7);
+ state_save = state << 17;
+ state &= !(AtiPcieCfg.PortHp);
+ reg = nbmisc_read_index(nb_dev, 0x0c);
+ reg |= state;
+ nbmisc_write_index(nb_dev, 0x0c, reg);
+
+ reg = nbmisc_read_index(nb_dev, 0x08);
+ reg |= state_save;
+ nbmisc_write_index(nb_dev, 0x08, reg);
+
+ if ((AtiPcieCfg.Config & PCIE_OFF_UNUSED_GPP_LANES)
+ && !(AtiPcieCfg.
+ Config & (PCIE_DISABLE_HIDE_UNUSED_PORTS +
+ PCIE_GFX_COMPLIANCE))) {
+ }
+ /* step 3 Power Down Control for Southbridge */
+ reg = nbpcie_p_read_index(dev, 0xa2);
+
+ switch ((reg >> 4) & 0x7) { /* get bit 4-6, LC_LINK_WIDTH_RD */
+ case 1:
+ nbpcie_ind_write_index(nb_dev, 0x65, 0x0e0e);
+ break;
+ case 2:
+ nbpcie_ind_write_index(nb_dev, 0x65, 0x0c0c);
+ break;
+ default:
+ break;
+ }
+}
+
+static void pcie_init(struct device *dev)
+{
+ /* Enable pci error detecting */
+ u32 dword;
+
+ printk_debug("pcie_init in rs690_pcie.c\n");
+
+ /* System error enable */
+ dword = pci_read_config32(dev, 0x04);
+ dword |= (1 << 8); /* System error enable */
+ dword |= (1 << 30); /* Clear possible errors */
+ pci_write_config32(dev, 0x04, dword);
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = 0,
+};
+
+static struct device_operations pcie_ops = {
+ .read_resources = pci_bus_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_bus_enable_resources,
+ .init = pcie_init,
+ .scan_bus = pci_scan_bridge,
+ /*.enable = rs690_enable, */
+ .ops_pci = &lops_pci,
+};
+
+static struct pci_driver pcie_driver __pci_driver = {
+ .ops = &pcie_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_RS690_PCIE,
+};
+
+static struct pci_driver pcie_driver_dev7 __pci_driver = {
+ .ops = &pcie_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_RS690_PCIE_DEV7,
+};
+static struct pci_driver pcie_driver_dev8 __pci_driver = {
+ .ops = &pcie_ops,
+ .vendor = PCI_VENDOR_ID_ATI,
+ .device = PCI_DEVICE_ID_ATI_RS690_PCIE_DEV8,
+};
+
+/**********************************************************************
+**********************************************************************/
+static void switching_gpp_configurations(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_rs690_config *cfg =
+ (struct southbridge_amd_rs690_config *)nb_dev->chip_info;
+
+ /* enables GPP reconfiguration */
+ reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7);
+ reg |=
+ (RECONFIG_GPPSB_EN + RECONFIG_GPPSB_LINK_CONFIG +
+ RECONFIG_GPPSB_ATOMIC_RESET);
+ nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg);
+
+ /* sets desired GPPSB configurations, bit4-7 */
+ reg = nbmisc_read_index(nb_dev, 0x67);
+ reg &= 0xff0f; /* clean */
+ reg |= cfg->gpp_configuration;
+ nbmisc_write_index(nb_dev, 0x67, reg);
+
+ /* read bit14 and write back its inverst value */
+ reg = nbmisc_read_index(nb_dev, PCIE_NBCFG_REG7);
+ reg ^= RECONFIG_GPPSB_GPPSB;
+ nbmisc_write_index(nb_dev, PCIE_NBCFG_REG7, reg);
+
+ /* delay 1ms */
+ mdelay(1);
+
+ /* waits until SB has trained to L0, poll for bit0-5 = 0x10 */
+ do {
+ reg = nbpcie_p_read_index(sb_dev, PCIE_LC_STATE0);
+ reg &= 0x1f; /* remain LSB 5 bits */
+ } while (LC_STATE_RECONFIG_GPPSB != reg);
+
+ /* ensures that virtual channel negotiation is completed. poll for bit1 = 0 */
+ do {
+ reg =
+ pci_ext_read_config32(nb_dev, sb_dev,
+ PCIE_VC0_RESOURCE_STATUS);
+ } while (reg & VC_NEGOTIATION_PENDING);
+}
+
+/*****************************************************************
+* The rs690 uses NBCONFIG:0x1c (BAR3) to map the PCIE Extended Configuration
+* Space to a 256MB range within the first 4GB of addressable memory.
+*****************************************************************/
+void enable_pcie_bar3(device_t nb_dev)
+{
+ printk_debug("enable_pcie_bar3()\n");
+ set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 1 << 30); /* Enables writes to the BAR3 register. */
+ set_nbcfg_enable_bits(nb_dev, 0x84, 7 << 16, 0 << 16);
+
+ pci_write_config32(nb_dev, 0x1C, EXT_CONF_BASE_ADDRESS); /* PCIEMiscInit */
+ pci_write_config32(nb_dev, 0x20, 0x00000000);
+ set_htiu_enable_bits(nb_dev, 0x32, 1 << 28, 1 << 28); /* PCIEMiscInit */
+ ProgK8TempMmioBase(1, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS);
+}
+
+/*****************************************************************
+* We should disable bar3 when we want to exit rs690_enable, because bar3 will be
+* remapped in set_resource later.
+*****************************************************************/
+void disable_pcie_bar3(device_t nb_dev)
+{
+ printk_debug("disable_pcie_bar3()\n");
+ set_nbcfg_enable_bits(nb_dev, 0x7C, 1 << 30, 0 << 30); /* Disable writes to the BAR3. */
+ pci_write_config32(nb_dev, 0x1C, 0); /* clear BAR3 address */
+ ProgK8TempMmioBase(0, EXT_CONF_BASE_ADDRESS, TEMP_MMIO_BASE_ADDRESS);
+}
+
+/*****************************************
+* Compliant with CIM_33's PCIEGPPInit
+* nb_dev:
+* root bridge struct
+* dev:
+* p2p bridge struct
+* port:
+* p2p bridge number, 4-8
+*****************************************/
+void rs690_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
+{
+ u8 reg8;
+ u16 reg16;
+ device_t sb_dev;
+ struct southbridge_amd_rs690_config *cfg =
+ (struct southbridge_amd_rs690_config *)nb_dev->chip_info;
+ printk_debug("gpp_sb_init nb_dev=0x%x, dev=0x%x, port=0x%x\n", nb_dev, dev, port);
+
+ /* init GPP core */
+ set_pcie_enable_bits(nb_dev, 0x20 | PCIE_CORE_INDEX_GPPSB, 1 << 8,
+ 1 << 8);
+ /* PCIE initialization 5.10.2: rpr 2.12*/
+ set_pcie_enable_bits(nb_dev, 0x02 | PCIE_CORE_INDEX_GPPSB, 1 << 0, 1 << 0); /* no description in datasheet. */
+
+ /* init GPPSB port */
+ /* Sets RCB timeout to be 100ms by setting bits[18:16] to 3 b101 and shortens the enumeration timer by setting bit[19] to 0*/
+ set_pcie_enable_bits(dev, 0x70, 7 << 16, 0xd << 16);
+ /* PCIE initialization 5.10.2: rpr 2.4 */
+ set_pcie_enable_bits(dev, 0x02, ~0xffffffff, 1 << 14);
+ /* Do not gate the electrical idle from the PHY and enables the escape from L1L23 */
+ set_pcie_enable_bits(dev, 0xA0, ~0xffffffbf, (3 << 30) | (3 << 12) | (3 << 4));
+ /* PCIE initialization 5.10.2: rpr 2.13 */
+ set_pcie_enable_bits(dev, 0x02, ~0xffffffff, 1 << 6);
+
+ /* SLOT_IMPLEMENTED in pcieConfig space */
+ reg8 = pci_read_config8(dev, 0x5b);
+ reg8 |= 1 << 0;
+ pci_write_config8(dev, 0x5b, reg8);
+
+ reg16 = pci_read_config16(dev, 0x5a);
+ reg16 |= 0x100;
+ pci_write_config16(dev, 0x5a, reg16);
+ nbmisc_write_index(nb_dev, 0x34, 0);
+
+ /* check compliance rpr step 2.1*/
+ if (AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE) {
+ u32 tmp;
+ tmp = nbmisc_read_index(nb_dev, 0x67);
+ tmp |= 1 << 3;
+ nbmisc_write_index(nb_dev, 0x67, tmp);
+ }
+
+ /* step 5: dynamic slave CPL buffer allocation */
+ set_pcie_enable_bits(dev, 0x20, 1 << 11, 1 << 11);
+
+ /* step 5a: Training for GPP devices */
+ /* init GPP */
+ switch (port) {
+ case 4: /* GPP */
+ case 5:
+ case 6:
+ case 7:
+ /* Blocks DMA traffic during C3 state */
+ set_pcie_enable_bits(dev, 0x10, 1 << 0, 0 << 0);
+ /* Enabels TLP flushing */
+ set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
+
+ /* check port enable */
+ if (cfg->port_enable & (1 << port)) {
+ PcieReleasePortTraining(nb_dev, dev, port);
+ if (!(AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE)) {
+ u8 res = PcieTrainPort(nb_dev, dev, port);
+ printk_debug("PcieTrainPort port=0x%x result=%d\n", port, res);
+ if (res) {
+ AtiPcieCfg.PortDetect |= 1 << port;
+ }
+ }
+ }
+ break;
+ case 8: /* SB */
+ break;
+ }
+ PciePowerOffGppPorts(nb_dev, dev, port);
+
+ /* step 5b: GFX devices in a GPP slot */
+
+ /* step 6a: VCI */
+ sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0));
+ if (port == 8) {
+ /* Clear bits 7:1 */
+ pci_ext_write_config32(nb_dev, sb_dev, 0x114, 0x3f << 1, 0 << 1);
+ /* Maps Traffic Class 1-7 to VC1 */
+ pci_ext_write_config32(nb_dev, sb_dev, 0x120, 0x7f << 1, 0x7f << 1);
+ /* Assigns VC ID to 1 */
+ pci_ext_write_config32(nb_dev, sb_dev, 0x120, 7 << 24, 1 << 24);
+ /* Enables VC1 */
+ pci_ext_write_config32(nb_dev, sb_dev, 0x120, 1 << 31, 1 << 31);
+#if 0
+ do {
+ reg16 = pci_ext_read_config32(nb_dev, sb_dev, 0x124);
+ reg16 &= 0x2;
+ } while (reg16); /*bit[1] = 0 means VC1 flow control initialization is successful */
+#endif
+ }
+
+ /* step 6b: L0s for the southbridge link */
+ /* To enalbe L0s in the southbridage*/
+
+ /* step 6c: L0s for the GPP link(s) */
+ /* To eable L0s in the RS690 for the GPP port(s) */
+ set_pcie_enable_bits(nb_dev, 0xf9, 3 << 13, 2 << 13);
+ set_pcie_enable_bits(dev, 0xa0, 0xf << 8, 0x9 << 8);
+ reg16 = pci_read_config16(dev, 0x68);
+ reg16 |= 1 << 0;
+ pci_write_config16(dev, 0x68, reg16);
+
+ /* step 6d: ASPM L1 for the southbridge link */
+ /* To enalbe L1s in the southbridage*/
+
+ /* step 6e: ASPM L1 for GPP link(s) */;
+ set_pcie_enable_bits(nb_dev, 0xf9, 3 << 13, 2 << 13);
+ set_pcie_enable_bits(dev, 0xa0, 3 << 12, 3 << 12);
+ set_pcie_enable_bits(dev, 0xa0, 0xf << 4, 3 << 4);
+ reg16 = pci_read_config16(dev, 0x68);
+ reg16 &= ~0xff;
+ reg16 |= 1 << 1;
+ pci_write_config16(dev, 0x68, reg16);
+
+ /* step 6f: Turning off PLL during L1/L23 */
+ set_pcie_enable_bits(nb_dev, 0x40, 1 << 3, 1 << 3);
+ set_pcie_enable_bits(nb_dev, 0x40, 1 << 9, 1 << 9);
+
+ /* step 6g: TXCLK clock gating */
+ set_nbmisc_enable_bits(nb_dev, 0x7, 3 << 4, 3 << 4);
+ set_nbmisc_enable_bits(nb_dev, 0x7, 1 << 22, 1 << 22);
+ set_pcie_enable_bits(nb_dev, 0x11, 0xf << 4, 0xc << 4);
+
+ /* step 6h: LCLK clock gating, done in rs690_config_misc_clk() */
+}
+
+/*****************************************
+* Compliant with CIM_33's PCIEConfigureGPPCore
+*****************************************/
+void config_gpp_core(device_t nb_dev, device_t sb_dev)
+{
+ u32 reg;
+ struct southbridge_amd_rs690_config *cfg =
+ (struct southbridge_amd_rs690_config *)nb_dev->chip_info;
+
+ reg = nbmisc_read_index(nb_dev, 0x20);
+ if (AtiPcieCfg.Config & PCIE_ENABLE_STATIC_DEV_REMAP)
+ reg &= 0xfffffffd; /* set bit1 = 0 */
+ else
+ reg |= 0x2; /* set bit1 = 1 */
+ nbmisc_write_index(nb_dev, 0x20, reg);
+
+ reg = nbmisc_read_index(nb_dev, 0x67); /* get STRAP_BIF_LINK_CONFIG_GPPSB at bit 4-7 */
+ if (cfg->gpp_configuration != ((reg >> 4) & 0xf))
+ switching_gpp_configurations(nb_dev, sb_dev);
+ ValidatePortEn(nb_dev);
+}
+
+/*****************************************
+* Compliant with CIM_33's PCIEMiscClkProg
+*****************************************/
+void pcie_config_misc_clk(device_t nb_dev)
+{
+ u32 reg;
+ struct bus pbus; /* fake bus for dev0 fun1 */
+
+ reg = pci_read_config32(nb_dev, 0x4c);
+ reg |= 1 << 0;
+ pci_write_config32(nb_dev, 0x4c, reg);
+
+ if (AtiPcieCfg.Config & PCIE_GFX_CLK_GATING) {
+ /* TXCLK Clock Gating */
+ set_nbmisc_enable_bits(nb_dev, 0x07, 3 << 0, 3 << 0);
+ set_nbmisc_enable_bits(nb_dev, 0x07, 1 << 22, 1 << 22);
+ set_pcie_enable_bits(nb_dev, 0x11 | PCIE_CORE_INDEX_GFX, (3 << 6) | (~0xf), 3 << 6);
+
+ /* LCLK Clock Gating */
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94);
+ reg &= ~(1 << 16);
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg);
+ }
+
+ if (AtiPcieCfg.Config & PCIE_GPP_CLK_GATING) {
+ /* TXCLK Clock Gating */
+ set_nbmisc_enable_bits(nb_dev, 0x07, 3 << 4, 3 << 4);
+ set_nbmisc_enable_bits(nb_dev, 0x07, 1 << 22, 1 << 22);
+ set_pcie_enable_bits(nb_dev, 0x11 | PCIE_CORE_INDEX_GPPSB, (3 << 6) | (~0xf), 3 << 6);
+
+ /* LCLK Clock Gating */
+ reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94);
+ reg &= ~(1 << 24);
+ pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg);
+ }
+
+ reg = pci_read_config32(nb_dev, 0x4c);
+ reg &= ~(1 << 0);
+ pci_write_config32(nb_dev, 0x4c, reg);
+}