Patch for AMD SB600 chipset.

Most of the functions in SB600 are enabled except power management.

Signed-off-by:  Michael Xie <Michael.Xie@amd.com>
Reviewed-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3589 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 207 insertions, 0 deletions

diff --git a/src/southbridge/amd/sb600/sb600_smbus.c b/src/southbridge/amd/sb600/sb600_smbus.c
new file mode 100644
index 0000000000..d5a8a18742
--- /dev/null
+++ b/src/southbridge/amd/sb600/sb600_smbus.c
@@ -0,0 +1,207 @@
+//#include <arch/io.h>
+//#include <device/device.h>
+//#include <device/pci.h>
+//#include <device/pci_ids.h>
+//#include <device/pci_ops.h>
+//#include <device/smbus_def.h>
+#include "sb600_smbus.h"
+
+static inline void smbus_delay(void)
+{
+	outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(u32 smbus_io_base)
+{
+	unsigned long loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		u8 val;
+		val = inb(smbus_io_base + SMBHSTSTAT);
+		val &= 0x1f;
+		if (val == 0) {	/* ready now */
+			return 0;
+		}
+		outb(val, smbus_io_base + SMBHSTSTAT);
+	} while (--loops);
+	return -2;		/* time out */
+}
+
+static int smbus_wait_until_done(u32 smbus_io_base)
+{
+	unsigned long loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		u8 val;
+
+		val = inb(smbus_io_base + SMBHSTSTAT);
+		val &= 0x1f;	/* mask off reserved bits */
+		if (val & 0x1c) {
+			return -5;	/* error */
+		}
+		if (val == 0x02) {
+			outb(val, smbus_io_base + SMBHSTSTAT);	/* clear status */
+			return 0;
+		}
+	} while (--loops);
+	return -3;		/* timeout */
+}
+
+static int do_smbus_recv_byte(u32 smbus_io_base, u32 device)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 2) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	/* read results of transaction */
+	byte = inb(smbus_io_base + SMBHSTCMD);
+
+	return byte;
+}
+
+static int do_smbus_send_byte(u32 smbus_io_base, u32 device,
+			      u8 val)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the command... */
+	outb(val, smbus_io_base + SMBHSTCMD);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 2) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	return 0;
+}
+
+static int do_smbus_read_byte(u32 smbus_io_base, u32 device,
+			      u32 address)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the command/address... */
+	outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 3) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	/* read results of transaction */
+	byte = inb(smbus_io_base + SMBHSTDAT0);
+
+	return byte;
+}
+
+static int do_smbus_write_byte(u32 smbus_io_base, u32 device,
+			       u32 address, u8 val)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the command/address... */
+	outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+	/* output value */
+	outb(val, smbus_io_base + SMBHSTDAT0);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 3) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	return 0;
+}
+
+static void alink_ab_indx(unsigned int reg_space, unsigned int reg_addr,
+			  unsigned int mask, unsigned int val)
+{
+	unsigned int tmp;
+	outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);
+	tmp = inl(AB_DATA);
+
+	tmp &= ~mask;
+	tmp |= val;
+
+	/* printk_debug("about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */
+	outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);	/* probably we dont have to do it again. */
+	outl(tmp, AB_DATA);
+}
+
+/* space = 0: AX_INDXC, AX_DATAC
+*   space = 1: AX_INDXP, AX_DATAP
+ */
+static void alink_ax_indx(unsigned int space /*c or p? */ , unsigned int axindc,
+			  unsigned int mask, unsigned int val)
+{
+	unsigned int tmp;
+
+	/* read axindc to tmp */
+	outl(space << 30 | space << 3 | 0x30, AB_INDX);
+	outl(axindc, AB_DATA);
+	outl(space << 30 | space << 3 | 0x34, AB_INDX);
+	tmp = inl(AB_DATA);
+
+	tmp &= ~mask;
+	tmp |= val;
+
+	/* write tmp */
+	outl(space << 30 | space << 3 | 0x30, AB_INDX);
+	outl(axindc, AB_DATA);
+	outl(space << 30 | space << 3 | 0x34, AB_INDX);
+	outl(tmp, AB_DATA);
+}
+
+
+