summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/cs5530
diff options
context:
space:
mode:
authorJuergen Beisert <juergen127@kreuzholzen.de>2007-10-07 21:00:02 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2007-10-07 21:00:02 +0000
commit37f166982efed9613142522e5a475d5dcc3aaeab (patch)
treeb02d0ed3ec19dc7543d9c7e02ed5435f4dff3359 /src/southbridge/amd/cs5530
parente9d4616a9566e29e69d3c967d35126abddd99cee (diff)
Fix some issues with spaces in the code and Doxygen style documentation.
Painting the splash graphic is now ifdef'ed. Signed-off-by: Juergen Beisert <juergen127@kreuzholzen.de> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2836 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/amd/cs5530')
-rw-r--r--src/southbridge/amd/cs5530/cs5530_vga.c225
1 files changed, 130 insertions, 95 deletions
diff --git a/src/southbridge/amd/cs5530/cs5530_vga.c b/src/southbridge/amd/cs5530/cs5530_vga.c
index cfeca824ef..c61a20f563 100644
--- a/src/southbridge/amd/cs5530/cs5530_vga.c
+++ b/src/southbridge/amd/cs5530/cs5530_vga.c
@@ -13,11 +13,22 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
+/**
+ * @brief Activate the VGA feature in a Geode GX1 based system with one
+ * of five possible VESA modes: VGA, SVGA, XGA, 4:3 SXGA and 5:4 SXGA.
+ * Also it is prepared to display a splash screen.
*
- * Purpose:
- * Activate the VGA feature in a Geode GX1 based system with one of five
- * possible VESA modes: VGA, SVGA, XGA, 4:3 SXGA and 5:4 SXGA. Also it is
- * prepared to display a splash screen.
+ * In a Geode GX1 environment the companion CS5530 is the VGA
+ * interface only. It contains a PLL for pixel clock generation,
+ * DACs to generate the analogue RGB signals, drivers for HSYNC
+ * and VSYNC and drivers for a digital flatpanel.
+ * The graphic feature itself (framebuffer, acceleration unit)
+ * is not part of this device. It is part of the CPU device.
+ * But both depend on each other, we cannot divide them into
+ * different drivers. So this driver is not only a CS5530 driver,
+ * it is also a Geode GX1 chipset graphic driver.
*/
#include <arch/io.h>
#include <device/device.h>
@@ -52,13 +63,13 @@
#define DC_TIMING_CFG 0x8308
#define DC_OUTPUT_CFG 0x830C
-/*
+/**
* what colour depth should be used as default (in bpp)
* Note: Currently no other value than 16 is supported
*/
#define COLOUR_DEPTH 16
-/*
+/**
* Support for a few basic video modes
* Note: all modes only for CRT. The flatpanel feature is
* not supported here (due to the lack of hardware to test)
@@ -67,33 +78,34 @@ struct video_mode {
int pixel_clock; /*<< pixel clock in Hz */
unsigned long pll_value; /*<< pll register value for this clock */
- int visible_pixel;
- int hsync_start;
- int hsync_end;
- int line_length;
+ int visible_pixel; /*<< visible pixels in one line */
+ int hsync_start; /*<< start of hsync behind visible pixels */
+ int hsync_end; /*<< end of hsync behind its start */
+ int line_length; /*<< whole line length */
- int visible_lines;
- int vsync_start;
- int vsync_end;
- int picture_length;
+ int visible_lines; /*<< visible lines on screen */
+ int vsync_start; /*<< vsync start behind last visible line */
+ int vsync_end; /*<< end of vsync behind its start */
+ int picture_length; /*<< whole screen length */
int sync_pol; /*<< 0: low, 1: high, bit 0 hsync, bit 1 vsync */
};
/*
- * values for .sync_pol
+ * values for .sync_pol in struct video_mode
*/
#define HSYNC_HIGH_POL 0
#define HSYNC_LOW_POL 1
#define VSYNC_HIGH_POL 0
#define VSYNC_LOW_POL 2
-/* ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync */
+/**
+ * 640x480 @ 72Hz hsync: 37.9kHz
+ * VESA standard mode for classic 4:3 monitors
+ * Copied from X11:
+ * ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
+ */
static const struct video_mode mode_640x480 = {
- /*
- * 640x480 @ 72Hz hsync: 37.9kHz
- * VESA standard mode for classic 4:3 monitors
- */
.pixel_clock = 31500000,
.pll_value = 0x33915801,
@@ -107,15 +119,16 @@ static const struct video_mode mode_640x480 = {
.vsync_end = 491,
.picture_length = 520, /* 13.89ms */
- .sync_pol = HSYNC_LOW_POL | VSYNC_LOW_POL
+ .sync_pol = HSYNC_LOW_POL | VSYNC_LOW_POL,
};
-/* ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync */
+/**
+ * 800x600 @ 72Hz hsync: 48.1kHz
+ * VESA standard mode for classic 4:3 monitors
+ * Copied from X11:
+ * ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
+ */
static const struct video_mode mode_800x600 = {
- /*
- * 800x600 @ 72Hz hsync: 48.1kHz
- * VESA standard mode for classic 4:3 monitors
- */
.pixel_clock = 50000000,
.pll_value = 0x23088801,
@@ -129,15 +142,16 @@ static const struct video_mode mode_800x600 = {
.vsync_end = 643,
.picture_length = 666, /* 13.89ms */
- .sync_pol = HSYNC_HIGH_POL | VSYNC_HIGH_POL
+ .sync_pol = HSYNC_HIGH_POL | VSYNC_HIGH_POL,
};
-/* ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync */
+/**
+ * 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
+ * Standard mode for classic 4:3 monitors
+ * Copied from X11:
+ * ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
+ */
static const struct video_mode mode_1024x768 = {
- /*
- * 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
- * Standard mode for classic 4:3 monitors
- */
.pixel_clock = 75000000,
.pll_value = 0x37E22801,
@@ -151,15 +165,16 @@ static const struct video_mode mode_1024x768 = {
.vsync_end = 777,
.picture_length = 806, /* 14.3us */
- .sync_pol = HSYNC_LOW_POL | VSYNC_LOW_POL
+ .sync_pol = HSYNC_LOW_POL | VSYNC_LOW_POL,
};
-/* ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync */
+/**
+ * 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
+ * Mode for classic 4:3 monitors
+ * Copied from X11:
+ * ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
+ */
static const struct video_mode mode_1280x960 = {
- /*
- * 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
- * Mode for classic 4:3 monitors
- */
.pixel_clock = 108000000,
.pll_value = 0x2710C805,
@@ -173,15 +188,16 @@ static const struct video_mode mode_1280x960 = {
.vsync_end = 964,
.picture_length = 1000, /* 16.67ms */
- .sync_pol = HSYNC_HIGH_POL | VSYNC_HIGH_POL
+ .sync_pol = HSYNC_HIGH_POL | VSYNC_HIGH_POL,
};
-/* ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync */
+/**
+ * 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
+ * Mode for modern 5:4 flat screens
+ * Copied from X11:
+ * ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
+ */
static const struct video_mode mode_1280x1024 = {
- /*
- * 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
- * Mode for modern 5:4 flat screens
- */
.pixel_clock = 108000000,
.pll_value = 0x2710C805,
@@ -195,11 +211,11 @@ static const struct video_mode mode_1280x1024 = {
.vsync_end = 1028,
.picture_length = 1066,
- .sync_pol = HSYNC_HIGH_POL | VSYNC_HIGH_POL
+ .sync_pol = HSYNC_HIGH_POL | VSYNC_HIGH_POL,
};
-/*
- * a few supported common modes
+/**
+ * List of supported common modes
*/
static const struct video_mode *modes[] = {
&mode_640x480, /* CONFIG_GX1_VIDEOMODE = 0 */
@@ -214,12 +230,14 @@ static const struct video_mode *modes[] = {
# error Requested video mode is unknown!
#endif
-/*
+/**
* Setup the pixel PLL in the companion chip
- * base: register's base address
- * pll_val: pll register value to be set
+ * @param[in] base register's base address
+ * @param[in] pll_val pll register value to be set
+ *
+ * The PLL to program here is located in the CS5530
*/
-static void cs5530_set_clock_frequency(void *io_base,unsigned long pll_val)
+static void cs5530_set_clock_frequency(void *io_base, unsigned long pll_val)
{
unsigned long reg;
@@ -247,17 +265,26 @@ static void cs5530_set_clock_frequency(void *io_base,unsigned long pll_val)
writel(reg, io_base+CS5530_DOT_CLK_CONFIG);
}
-/*
+/**
* Setup memory layout
- * gx_base: GX register area
- * mode: Data about the video mode to setup
+ * @param[in] gx_base GX register area
+ * @param[in] mode Data about the video mode to setup
*
- * This routine assumes unlocked DC registers. Using compressed buffer
- * is not supported! (makes more sense later, but not while booting)
+ * Memory layout must be setup in Geode GX1's chipset.
+ * Note: This routine assumes unlocked DC registers.
+ * Note: Using compressed buffer is not supported yet!
+ * (makes more sense later, but not while booting)
+ *
+ * At this point a check is missed if the requested video
+ * mode is possible with the provided video memory.
+ * Check if symbol CONFIG_VIDEO_MB is at least:
+ * - 1 (=1MiB) for VGA and SVGA
+ * - 2 (=2MiB) for XGA
+ * - 4 (=4MiB) for SXGA
*/
-static void dc_setup_layout(void *gx_base,const struct video_mode *mode)
+static void dc_setup_layout(void *gx_base, const struct video_mode *mode)
{
- unsigned long base = 0x00000000;
+ u32 base = 0x00000000;
writel(base, gx_base + DC_FB_ST_OFFSET);
@@ -270,12 +297,13 @@ static void dc_setup_layout(void *gx_base,const struct video_mode *mode)
writel(((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 3, gx_base + DC_BUF_SIZE);
}
-/*
+/**
* Setup the HSYNC/VSYNC, active video timing
- * gx_base: GX register area
- * mode: Data about the video mode to setup
+ * @param[in] gx_base GX register area
+ * @param[in] mode Data about the video mode to setup
*
- * This routine assumes unlocked DC registers
+ * Sync signal generation is done in Geode GX1's chipset.
+ * Note: This routine assumes unlocked DC registers
*
* |<------------------------- htotal ----------------------------->|
* |<------------ hactive -------------->| |
@@ -295,10 +323,10 @@ static void dc_setup_layout(void *gx_base,const struct video_mode *mode)
* |#####################################___________________________| line data
* |______________________________________________---------_________| YSYNC
*/
-static void dc_setup_timing(void *gx_base,const struct video_mode *mode)
+static void dc_setup_timing(void *gx_base, const struct video_mode *mode)
{
- unsigned long hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
- unsigned long vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+ u32 hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
+ u32 vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
hactive = mode->visible_pixel & 0x7FF;
hblankstart = hactive;
@@ -331,10 +359,13 @@ static void dc_setup_timing(void *gx_base,const struct video_mode *mode)
writel((vsyncstart - 2) | ((vsyncend - 2) << 16), gx_base + DC_FP_V_TIMING);
}
-/*
+/**
* Setup required internals to bring the mode up and running
- * gx_base: GX register area
- * mode: Data about the video mode to setup
+ * @param[in] gx_base GX register area
+ * @param[in] mode Data about the video mode to setup
+ *
+ * Must be setup in Geode GX1's chipset.
+ * Note: This routine assumes unlocked DC registers.
*/
static void cs5530_activate_mode(void *gx_base, const struct video_mode *mode)
{
@@ -348,21 +379,24 @@ static void cs5530_activate_mode(void *gx_base, const struct video_mode *mode)
writel(0x00003004, gx_base + DC_OUTPUT_CFG);
}
-/*
+/**
* Activate the current mode to be "visible" outside
- * gx_base: GX register area
- * mode: Data about the video mode to setup
+ * @param[in] gx_base GX register area
+ * @param[in] mode Data about the video mode to setup
+ *
+ * As we now activate the interface this must be done
+ * in the CS5530
*/
static void cs5530_activate_video(void *io_base, const struct video_mode *mode)
{
u32 val;
- val = mode->sync_pol;
- val <<= 8;
-
+ val = (u32)mode->sync_pol << 8;
writel(val | 0x0020002F, io_base + CS5530_DISPLAY_CONFIG);
}
+#if CONFIG_SPLASH_GRAPHIC == 1
+
/*
* This bitmap file must provide:
* int width: pixel count in one line
@@ -382,7 +416,7 @@ static void cs5530_activate_video(void *io_base, const struct video_mode *mode)
*
* This routine assumes we are using a 16 bit colour depth!
*/
-static void show_boot_splash_16(u32 swidth,u32 sheight,u32 pitch,void *base)
+static void show_boot_splash_16(u32 swidth, u32 sheight, u32 pitch,void *base)
{
int word_count,i;
unsigned short *adr;
@@ -391,51 +425,52 @@ static void show_boot_splash_16(u32 swidth,u32 sheight,u32 pitch,void *base)
* fill the screen with the colour of the
* left top pixel in the graphic
*/
- word_count = pitch*sheight;
- printk_debug("Clear Screen at %p, %d words\n",base,word_count);
- adr = (unsigned short *) base;
- for (i=0; i < word_count; i++, adr++)
+ word_count = pitch * sheight;
+ adr = (unsigned short*)base;
+ for (i = 0; i < word_count; i++, adr++)
*adr = colour_map[bitmap[0]];
- printk_debug("Ready\n");
/*
* paint the splash
*/
- xstart=swidth-width;
- ystart=sheight-height;
- printk_debug("Start at %u,%u\n",xstart,ystart);
- for (y=0;y<height;y++) {
- adr=(unsigned short*)(base + pitch*(y+ystart)+2*xstart);
- for (x=0;x<width;x++) {
- *adr=(unsigned short)colour_map[(int)bitmap[x+y*width]];
+ xstart = swidth-width;
+ ystart = sheight-height;
+ for (y = 0; y < height; y++) {
+ adr=(unsigned short*)(base + pitch*(y+ystart) + 2 * xstart);
+ for (x = 0; x < width; x++) {
+ *adr=(unsigned short)colour_map[(int)bitmap[x + y * width]];
adr++;
}
}
}
+#else
+# define show_boot_splash_16(w, x, y , z)
+#endif
-/*
- * management part
+/**
+ * LinuxBIOS management part
+ * @param[in] dev Info about the PCI device to initialise
*/
static void cs5530_vga_init(device_t dev)
{
const struct video_mode *mode;
void *io_base, *gx_base;
- io_base = (void*)pci_read_config32(dev,0x10);
+ io_base = (void*)pci_read_config32(dev, 0x10);
gx_base = (void*)GX_BASE;
mode = modes[CONFIG_GX1_VIDEOMODE];
printk_debug("Setting up video mode %dx%d with %d Hz clock\n",
mode->visible_pixel, mode->visible_lines, mode->pixel_clock);
- cs5530_set_clock_frequency(io_base,mode->pll_value);
+ cs5530_set_clock_frequency(io_base, mode->pll_value);
writel(DC_UNLOCK_MAGIC, gx_base + DC_UNLOCK);
show_boot_splash_16(mode->visible_pixel, mode->visible_lines,
- mode->visible_pixel*(COLOUR_DEPTH>>3),(void*)(GX_BASE+0x800000));
+ mode->visible_pixel * (COLOUR_DEPTH>>3), (void*)(GX_BASE + 0x800000));
- cs5530_activate_mode(gx_base,mode);
+ cs5530_activate_mode(gx_base, mode);
cs5530_activate_video(io_base, mode);
writel(0x00000000, gx_base + DC_UNLOCK);
@@ -446,13 +481,13 @@ static struct device_operations vga_ops = {
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = cs5530_vga_init,
- .enable = NULL /* not required */
+ .enable = NULL, /* not required */
};
static struct pci_driver vga_pci_driver __pci_driver = {
.ops = &vga_ops,
.vendor = PCI_VENDOR_ID_CYRIX,
- .device = PCI_DEVICE_ID_CYRIX_5530_VIDEO
+ .device = PCI_DEVICE_ID_CYRIX_5530_VIDEO,
};
#endif /* #if CONFIG_GX1_VIDEO == 1 */