New mechanism to define SRAM/memory map with automatic bounds checking

This patch creates a new mechanism to define the static memory layout
(primarily in SRAM) for a given board, superseding the brittle mass of
Kconfigs that we were using before. The core part is a memlayout.ld file
in the mainboard directory (although boards are expected to just include
the SoC default in most cases), which is the primary linker script for
all stages (though not rmodules for now). It uses preprocessor macros
from <memlayout.h> to form a different valid linker script for all
stages while looking like a declarative, boilerplate-free map of memory
addresses to the programmer. Linker asserts will automatically guarantee
that the defined regions cannot overlap. Stages are defined with a
maximum size that will be enforced by the linker. The file serves to
both define and document the memory layout, so that the documentation
cannot go missing or out of date.

The mechanism is implemented for all boards in the ARM, ARM64 and MIPS
architectures, and should be extended onto all systems using SRAM in the
future. The CAR/XIP environment on x86 has very different requirements
and the layout is generally not as static, so it will stay like it is
and be unaffected by this patch (save for aligning some symbol names for
consistency and sharing the new common ramstage linker script include).

BUG=None
TEST=Booted normally and in recovery mode, checked suspend/resume and
the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and
Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies
with ToT and looked for red flags.

Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614
Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213370
Reviewed-on: http://review.coreboot.org/9283
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: Aaron Durbin <adurbin@google.com>

1 files changed, 0 insertions, 87 deletions

diff --git a/src/soc/nvidia/tegra124/Kconfig b/src/soc/nvidia/tegra124/Kconfig
index acc6e7e960..1680f4554c 100644
--- a/src/soc/nvidia/tegra124/Kconfig
+++ b/src/soc/nvidia/tegra124/Kconfig
@@ -22,34 +22,6 @@ config BOOTBLOCK_CPU_INIT
 	  bootblock must load microcode or copy data from ROM before
 	  searching for the bootblock.
 
-# ROM image layout.
-#
-# 0x00000 Combined bootblock and BCT blob
-# 0x18000 Master CBFS header.
-# 0x18080 Free for CBFS data.
-#
-# iRAM (256k) layout.
-# (Note: The BootROM uses the address range [0x4000_0000:0x4000_E000) itself,
-#  so the bootblock loading address must be placed after that. After the
-#  handoff that area may be reclaimed for other uses, e.g. CBFS cache.)
-#
-# 0x4000_0000 TTB (16K+32B). 32B is for L1 table of LPAE.
-# 0x4000_4020 CBFS mapping cache (96K-32B)
-# 0x4001_C000 Stack (16KB... don't reduce without comparing LZMA scratchpad!).
-# 0x4002_0000 Bootblock (max 48KB).
-# 0x4002_C000 ROM stage (max 80KB).
-# 0x4003_FFFF End of iRAM.
-#
-# if VBOOT2_VERIFY_FIRMWARE,
-# 0x4000_0000 TTB (16K+32B). 32B is for L1 table of LPAE.
-# 0x4000_4020 CBMEM console area (8K-32B)
-# 0x4000_6000 CBFS mapping cache (72K)
-# 0x4001_8000 vboot work buffer (16K)
-# 0x4001_C000 Stack (16KB... don't reduce without comparing LZMA scratchpad!).
-# 0x4002_0000 bootblock and romstage (max 70KB).
-# 0x4003_1000 verstage (max 60KB).
-# 0x4003_FFFF End of iRAM.
-
 config BOOTBLOCK_ROM_OFFSET
 	hex
 	default 0x0
@@ -62,65 +34,6 @@ config CBFS_ROM_OFFSET
 	hex "offset of CBFS data in ROM"
 	default 0x18080
 
-config SYS_SDRAM_BASE
-	hex
-	default 0x80000000
-
-config BOOTBLOCK_BASE
-	hex
-	default 0x40020000
-
-# this has to be big enough to leave room big enough for the larger of the
-# bootblock and the romstage.
-config VERSTAGE_BASE
-	hex
-	default 0x40031000
-
-# with vboot2, romstage is loaded over to the bootblock space
-config ROMSTAGE_BASE
-	hex
-	default 0x40020000 if VBOOT2_VERIFY_FIRMWARE
-	default 0x4002c000
-
-config RAMSTAGE_BASE
-	hex
-	default 0x80200000
-
-config STACK_TOP
-	hex
-	default 0x40020000
-
-config STACK_BOTTOM
-	hex
-	default 0x4001c000
-
-# This is the ramstage thread stack, *not* the same as above! Currently unused.
-config STACK_SIZE
-	hex
-	default 0x800
-
-# TTB needs to be aligned to 16KB. Stick it in iRAM.
-config TTB_BUFFER
-	hex "memory address of the TTB buffer"
-	default 0x40000000
-
-config CBFS_CACHE_ADDRESS
-	hex "memory address to put CBFS cache data"
-	default 0x40004020
-
-config CBFS_CACHE_SIZE
-	hex "size of CBFS cache data"
-	default 0x00012000 if VBOOT2_VERIFY_FIRMWARE
-	default 0x00016000
-
-config VBOOT_WORK_BUFFER_ADDRESS
-	hex "memory address of vboot work buffer"
-	default 0x40018000
-
-config VBOOT_WORK_BUFFER_SIZE
-	hex "size of vboot work buffer"
-	default 0x00004000
-
 config TEGRA124_MODEL_TD570D
 	bool "TD570D"