soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLE

Early UART driver is for bootblock and romstage. It is supposed to be used
when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits
in bootblock requiered for serial to be set up.

Change-Id: I15520d566f107797e68d618885d4379e73d0fa45
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13677
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

10 files changed, 248 insertions, 1 deletions

diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig
index e39fc9c25f..dcfbad65a8 100644
--- a/src/soc/intel/apollolake/Kconfig
+++ b/src/soc/intel/apollolake/Kconfig
@@ -32,6 +32,13 @@ config CPU_SPECIFIC_OPTIONS
 	select RELOCATABLE_RAMSTAGE	# Build fails if this is not selected
 	select SOC_INTEL_COMMON
 	select UDELAY_TSC
+	select CONSOLE_SERIAL
+	select BOOTBLOCK_CONSOLE
+	select TSC_CONSTANT_RATE
+	select UDELAY_TSC
+	select TSC_CONSTANT_RATE
+	select NO_UART_ON_SUPERIO
+	select DRIVERS_UART_8250MEM_32
 
 config MMCONF_BASE_ADDRESS
 	hex "PCI MMIO Base Address"
@@ -63,4 +70,9 @@ config CPU_ADDR_BITS
 	int
 	default 36
 
+config CONSOLE_UART_BASE_ADDRESS
+	depends on CONSOLE_SERIAL
+	hex "MMIO base address for UART"
+	default 0xde000000
+
 endif
diff --git a/src/soc/intel/apollolake/Makefile.inc b/src/soc/intel/apollolake/Makefile.inc
index e58be867fc..7f8beb0c62 100644
--- a/src/soc/intel/apollolake/Makefile.inc
+++ b/src/soc/intel/apollolake/Makefile.inc
@@ -9,14 +9,20 @@ subdirs-y += ../../../cpu/x86/tsc
 
 bootblock-y += bootblock/bootblock.c
 bootblock-y += bootblock/cache_as_ram.S
+bootblock-y += bootblock/bootblock.c
 bootblock-y += gpio.c
 bootblock-y += placeholders.c
+bootblock-y += tsc_freq.c
+bootblock-y += uart_early.c
 
 romstage-y += placeholders.c
 romstage-y += gpio.c
+romstage-y += uart_early.c
+
 smm-y += placeholders.c
 ramstage-y += placeholders.c
 ramstage-y += gpio.c
+ramstage-y += uart_early.c
 
 CPPFLAGS_common += -I$(src)/soc/intel/apollolake/include
 
diff --git a/src/soc/intel/apollolake/bootblock/bootblock.c b/src/soc/intel/apollolake/bootblock/bootblock.c
index dc0b183bba..d3a78e106f 100644
--- a/src/soc/intel/apollolake/bootblock/bootblock.c
+++ b/src/soc/intel/apollolake/bootblock/bootblock.c
@@ -1,6 +1,34 @@
-#include <soc/bootblock.h>
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2016 Intel Corp.
+ * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
 #include <arch/cpu.h>
+#include <bootblock_common.h>
+#include <device/pci.h>
+#include <soc/bootblock.h>
+#include <soc/northbridge.h>
+#include <soc/pci_devs.h>
 
 void asmlinkage bootblock_c_entry(void)
 {
+	device_t dev = NB_DEV_ROOT;
+
+	/* Set PCI Express BAR */
+	pci_io_write_config32(dev, PCIEXBAR, CONFIG_MMCONF_BASE_ADDRESS | 1);
+
+	dev = P2SB_DEV;
+	/* BAR and MMIO enable for IOSF, so that GPIOs can be configured */
+	pci_write_config32(dev, PCI_BASE_ADDRESS_0, CONFIG_IOSF_BASE_ADDRESS);
+	pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0);
+	pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+
+	/* Call lib/bootblock.c main */
+	main();
 }
diff --git a/src/soc/intel/apollolake/include/soc/bootblock.h b/src/soc/intel/apollolake/include/soc/bootblock.h
index 933c7fecd4..655188bf62 100644
--- a/src/soc/intel/apollolake/include/soc/bootblock.h
+++ b/src/soc/intel/apollolake/include/soc/bootblock.h
@@ -3,4 +3,6 @@
 #include <arch/cpu.h>
 
 void asmlinkage bootblock_c_entry(void);
+/* provide prototype for lib/bootblock.c main as workaround */
+void main(void);
 #endif
diff --git a/src/soc/intel/apollolake/include/soc/cpu.h b/src/soc/intel/apollolake/include/soc/cpu.h
new file mode 100644
index 0000000000..bee58b206e
--- /dev/null
+++ b/src/soc/intel/apollolake/include/soc/cpu.h
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Intel Corp.
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _SOC_APOLLOLAKE_CPU_H_
+#define _SOC_APOLLOLAKE_CPU_H_
+
+#include <cpu/x86/msr.h>
+
+#define CPUID_APOLLOLAKE_A0	0x506c8
+
+#define MSR_PLATFORM_INFO	0xce
+
+#define BASE_CLOCK_MHZ		100
+
+#endif /* _SOC_APOLLOLAKE_CPU_H_ */
diff --git a/src/soc/intel/apollolake/include/soc/northbridge.h b/src/soc/intel/apollolake/include/soc/northbridge.h
new file mode 100644
index 0000000000..4a071cb788
--- /dev/null
+++ b/src/soc/intel/apollolake/include/soc/northbridge.h
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Intel Corp.
+ * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _SOC_APOLLOLAKE_NORTHBRIDGE_H_
+#define _SOC_APOLLOLAKE_NORTHBRIDGE_H_
+
+#define MCHBAR		0x48
+#define PCIEXBAR	0x60
+#define PCIEX_SIZE	(256 * MiB)
+
+#define BDSM		0xb0	/* Base Data Stolen Memory */
+#define BGSM		0xb4	/* Base GTT Stolen Memory */
+#define TSEG		0xb8	/* TSEG base */
+#define TOLUD		0xbc	/* Top of Low Used Memory */
+#define TOUUD		0xa8	/* Top of Upper Usable DRAM */
+
+#endif /* _SOC_APOLLOLAKE_NORTHBRIDGE_H_ */
diff --git a/src/soc/intel/apollolake/include/soc/pci_devs.h b/src/soc/intel/apollolake/include/soc/pci_devs.h
new file mode 100644
index 0000000000..3116389090
--- /dev/null
+++ b/src/soc/intel/apollolake/include/soc/pci_devs.h
@@ -0,0 +1,40 @@
+#ifndef _SOC_APOLLOLAKE_PCI_DEVS_H_
+#define _SOC_APOLLOLAKE_PCI_DEVS_H_
+
+#include <rules.h>
+
+#define _NB_DEVFN(slot)				PCI_DEVFN(NB_DEV_SLOT_ ## slot, 0)
+#define _LPSS_PCI_DEVFN(slot, func)		PCI_DEVFN(LPSS_DEV_SLOT_##slot, func)
+
+
+#if ENV_RAMSTAGE
+#include <device/device.h>
+#include <device/pci_def.h>
+#define _NB_DEV(slot)				dev_find_slot(0, _NB_DEVFN(slot))
+#define _LPSS_PCI_DEV(slot, func)		dev_find_slot(0, _LPSS_PCI_DEVFN(slot, func))
+#else
+#include <arch/io.h>
+#define _NB_DEV(slot)				PCI_DEV(0, NB_DEV_SLOT_ ## slot, 0)
+#define _LPSS_PCI_DEV(slot, func)		PCI_DEV(0, LPSS_DEV_SLOT_##slot, func)
+#endif
+
+/* North bridge devices */
+#define NB_DEV_SLOT_ROOT	0x00
+#define  NB_DEVFN_ROOT		_NB_DEVFN(ROOT)
+#define  NB_DEV_ROOT		_NB_DEV(ROOT)
+
+/* LPSS UART */
+#define LPSS_DEV_SLOT_UART	0x18
+#define  LPSS_DEVFN_UART0	_LPSS_PCI_DEVFN(UART, 0)
+#define  LPSS_DEVFN_UART1	_LPSS_PCI_DEVFN(UART, 1)
+#define  LPSS_DEVFN_UART2	_LPSS_PCI_DEVFN(UART, 2)
+#define  LPSS_DEVFN_UART3	_LPSS_PCI_DEVFN(UART, 3)
+#define  LPSS_DEV_UART0		_LPSS_PCI_DEV(UART, 0)
+#define  LPSS_DEV_UART1		_LPSS_PCI_DEV(UART, 1)
+#define  LPSS_DEV_UART2		_LPSS_PCI_DEV(UART, 2)
+#define  LPSS_DEV_UART3		_LPSS_PCI_DEV(UART, 3)
+
+#define P2SB_DEV		PCI_DEV(0, 0xd, 0)
+#define PMC_DEV			PCI_DEV(0, 0xd, 1)
+
+#endif
diff --git a/src/soc/intel/apollolake/include/soc/uart.h b/src/soc/intel/apollolake/include/soc/uart.h
new file mode 100644
index 0000000000..fd535fba23
--- /dev/null
+++ b/src/soc/intel/apollolake/include/soc/uart.h
@@ -0,0 +1,28 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Intel Corp.
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _SOC_APOLLOLAKE_UART_H_
+#define _SOC_APOLLOLAKE_UART_H_
+
+/* Clock is 100MHz * (M / N).*/
+#define UART_CLK		0x200
+# define UART_CLK_UPDATE	(1 << 31)
+# define UART_CLK_DIV_N(n)	(((n) & 0x7fff) << 16)
+# define UART_CLK_DIV_M(m)	(((m) & 0x7fff) << 1)
+# define UART_CLK_EN		(1 << 0)
+#define UART_RESET		0x204
+# define UART_RESET_DMA_EN	(1 << 2)
+# define UART_RESET_UART_EN	(3 << 0)
+
+void lpss_console_uart_init(void);
+
+#endif /* _SOC_APOLLOLAKE_UART_H_ */
diff --git a/src/soc/intel/apollolake/tsc_freq.c b/src/soc/intel/apollolake/tsc_freq.c
new file mode 100644
index 0000000000..b6320eda8f
--- /dev/null
+++ b/src/soc/intel/apollolake/tsc_freq.c
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <cpu/x86/msr.h>
+#include <cpu/x86/tsc.h>
+#include <soc/cpu.h>
+
+unsigned long tsc_freq_mhz(void)
+{
+    msr_t msr = rdmsr(MSR_PLATFORM_INFO);
+    return (BASE_CLOCK_MHZ * ((msr.lo >> 8) & 0xff));
+}
diff --git a/src/soc/intel/apollolake/uart_early.c b/src/soc/intel/apollolake/uart_early.c
new file mode 100644
index 0000000000..d3b1d80fc3
--- /dev/null
+++ b/src/soc/intel/apollolake/uart_early.c
@@ -0,0 +1,61 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Intel Corp.
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <console/uart.h>
+#include <device/pci.h>
+#include <soc/gpio.h>
+#include <soc/uart.h>
+#include <soc/pci_devs.h>
+
+static void lpss_uart_write(uint16_t reg, uint32_t val)
+{
+	uintptr_t base = CONFIG_CONSOLE_UART_BASE_ADDRESS | reg;
+	write32((void *)base, val);
+}
+
+void lpss_console_uart_init(void)
+{
+	uint32_t clk_sel;
+	device_t uart = _LPSS_PCI_DEV(UART, CONFIG_UART_FOR_CONSOLE & 3);
+
+	if (CONFIG_UART_FOR_CONSOLE > 2)
+		return;
+
+	/* Enable BAR0 for the UART -- this is where the 8250 registers hide */
+	pci_write_config32(uart, PCI_BASE_ADDRESS_0,
+			   CONFIG_CONSOLE_UART_BASE_ADDRESS);
+
+	/* Enable memory access and bus master */
+	pci_write_config32(uart, PCI_COMMAND,
+			   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+        /* Take UART out of reset */
+	lpss_uart_write(UART_RESET, UART_RESET_UART_EN);
+
+	/* These values get us a 1.836 MHz clock (ideally we want 1.843 MHz) */
+	clk_sel = UART_CLK_DIV_N(0x7fff) | UART_CLK_DIV_M(0x025a);
+	/* Set M and N divisor inputs and enable clock */
+	lpss_uart_write(UART_CLK, clk_sel | UART_CLK_UPDATE);
+	lpss_uart_write(UART_CLK, clk_sel | UART_CLK_EN);
+
+}
+
+uintptr_t uart_platform_base(int idx)
+{
+	return (CONFIG_CONSOLE_UART_BASE_ADDRESS);
+}
+
+unsigned int uart_platform_refclk(void)
+{
+	/* That's within 0.5% of the actual value we've set earlier */
+	return 115200 * 16;
+}