summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake
diff options
context:
space:
mode:
authorAaron Durbin <adurbin@chromium.org>2015-07-22 20:42:51 -0500
committerPatrick Georgi <pgeorgi@google.com>2015-07-29 19:29:48 +0200
commited575681d1706783cc5cf75407490bc6d81a98d1 (patch)
treeaabf9a460cdbe410576d5dfa701ef7ad2c17e32f /src/soc/intel/skylake
parentdec2751847a0385bbcbdb14c929b91605e7dc2db (diff)
skylake: remove unused types and definitions in gpio.h
These types and definitions were carried over from a previous platform. However, they are not used. Remove them. BUG=chrome-os-partner:42982 BRANCH=None TEST=Built on glados Change-Id: Ib3d20222df34a32865aac6b6cf13517c208e17c6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: be2d0d273a6c02483a944edac95ab48c433b29cd Original-Change-Id: I56a0d549f5733eec8f405f2024ced8c153fa545c Original-Signed-off-by: Aaron Durbin <adurbin@chormium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288191 Original-Trybot-Ready: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11066 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/soc/intel/skylake')
-rw-r--r--src/soc/intel/skylake/include/soc/gpio.h139
1 files changed, 0 insertions, 139 deletions
diff --git a/src/soc/intel/skylake/include/soc/gpio.h b/src/soc/intel/skylake/include/soc/gpio.h
index 03ed11988d..1d49a4599d 100644
--- a/src/soc/intel/skylake/include/soc/gpio.h
+++ b/src/soc/intel/skylake/include/soc/gpio.h
@@ -23,23 +23,6 @@
#include <stdint.h>
-/* PCH-LP GPIOBASE Registers */
-#define GPIO_OWNER(set) (0x00 + ((set) * 4))
-#define GPIO_PIRQ_APIC_EN 0x10
-#define GPIO_BLINK 0x18
-#define GPIO_SER_BLINK 0x1c
-#define GPIO_SER_BLINK_CS 0x20
-#define GPIO_SER_BLINK_DATA 0x24
-#define GPIO_ROUTE(set) (0x30 + ((set) * 4))
-#define GPIO_ALT_GPI_SMI_STS 0x50
-#define GPIO_ALT_GPI_SMI_EN 0x54
-#define GPIO_RESET(set) (0x60 + ((set) * 4))
-#define GPIO_GLOBAL_CONFIG 0x7c
-#define GPIO_IRQ_IS(set) (0x80 + ((set) * 4))
-#define GPIO_IRQ_IE(set) (0x90 + ((set) * 4))
-#define GPIO_CONFIG0(gpio) (0x100 + ((gpio) * 8))
-#define GPIO_CONFIG1(gpio) (0x104 + ((gpio) * 8))
-
/*
* GPP_Ax to GPP_Gx;
* where x=24 [between GPIO Community A to F]
@@ -148,115 +131,6 @@ typedef struct {
GPIO_GET_GROUP_INDEX((pad >> 16)))
#define GPIO_GET_PAD_NUMBER(pad) (pad & 0xFFFF)
-/* conf0 */
-#define GPIO_MODE_NATIVE (0 << 0)
-#define GPIO_MODE_GPIO (1 << 0)
-
-#define GPIO_DIR_OUTPUT (0 << 2)
-#define GPIO_DIR_INPUT (1 << 2)
-
-#define GPIO_NO_INVERT (0 << 3)
-#define GPIO_INVERT (1 << 3)
-
-#define GPIO_IRQ_EDGE (0 << 4)
-#define GPIO_IRQ_LEVEL (1 << 4)
-
-#define GPI_LEVEL (1 << 30)
-
-#define GPIO_OUT_LOW 0
-#define GPIO_OUT_HIGH 1
-#define GPO_LEVEL_SHIFT 31
-#define GPO_LEVEL_MASK (1 << GPO_LEVEL_SHIFT)
-#define GPO_LEVEL_LOW (GPIO_OUT_LOW << GPO_LEVEL_SHIFT)
-#define GPO_LEVEL_HIGH (GPIO_OUT_HIGH << GPO_LEVEL_SHIFT)
-
-/* conf1 */
-#define GPIO_PULL_NONE (0 << 0)
-#define GPIO_PULL_DOWN (1 << 0)
-#define GPIO_PULL_UP (2 << 0)
-
-#define GPIO_SENSE_ENABLE (0 << 2)
-#define GPIO_SENSE_DISABLE (1 << 2)
-
-/* owner */
-#define GPIO_OWNER_ACPI 0
-#define GPIO_OWNER_GPIO 1
-
-/* route */
-#define GPIO_ROUTE_SCI 0
-#define GPIO_ROUTE_SMI 1
-
-/* irqen */
-#define GPIO_IRQ_DISABLE 0
-#define GPIO_IRQ_ENABLE 1
-
-/* blink */
-#define GPO_NO_BLINK 0
-#define GPO_BLINK 1
-
-/* reset */
-#define GPIO_RESET_PWROK 0
-#define GPIO_RESET_RSMRST 1
-
-/* pirq route to io-apic */
-
-#define GPIO_PIRQ_APIC_MASK 0
-#define GPIO_PIRQ_APIC_ROUTE 1
-
-#define PCH_GPIO_END \
- { .conf0 = GPIO_LIST_END }
-
-#define PCH_GPIO_NATIVE \
- { .conf0 = GPIO_MODE_NATIVE }
-
-#define PCH_GPIO_UNUSED \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT, \
- .owner = GPIO_OWNER_GPIO, \
- .conf1 = GPIO_SENSE_DISABLE }
-
-#define PCH_GPIO_ACPI_SCI \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT, \
- .owner = GPIO_OWNER_ACPI, \
- .route = GPIO_ROUTE_SCI }
-
-#define PCH_GPIO_ACPI_SMI \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT, \
- .owner = GPIO_OWNER_ACPI, \
- .route = GPIO_ROUTE_SMI }
-
-#define PCH_GPIO_INPUT \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT, \
- .owner = GPIO_OWNER_GPIO }
-
-#define PCH_GPIO_INPUT_INVERT \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT, \
- .owner = GPIO_OWNER_GPIO }
-
-#define PCH_GPIO_IRQ_EDGE \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_EDGE, \
- .owner = GPIO_OWNER_GPIO, \
- .irqen = GPIO_IRQ_ENABLE }
-
-#define PCH_GPIO_IRQ_LEVEL \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL, \
- .owner = GPIO_OWNER_GPIO, \
- .irqen = GPIO_IRQ_ENABLE }
-
-#define PCH_GPIO_PIRQ \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT, \
- .owner = GPIO_OWNER_GPIO, \
- .pirq = GPIO_PIRQ_APIC_ROUTE }
-
-#define PCH_GPIO_OUT_HIGH \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_OUTPUT | GPO_LEVEL_HIGH, \
- .owner = GPIO_OWNER_GPIO, \
- .conf1 = GPIO_SENSE_DISABLE }
-
-#define PCH_GPIO_OUT_LOW \
- { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_OUTPUT | GPO_LEVEL_LOW, \
- .owner = GPIO_OWNER_GPIO, \
- .conf1 = GPIO_SENSE_DISABLE }
-
/* Number of pins used by SerialIo controllers */
#define PCH_SERIAL_IO_PINS_PER_UART_CONTROLLER 4
#define PCH_SERIAL_IO_PINS_PER_UART_CONTROLLER_NO_FLOW_CTRL 2
@@ -269,19 +143,6 @@ typedef struct {
#define B_PCH_GPIO_PAD_MODE (0x1000 | 0x800 | 0x400)
#define N_PCH_GPIO_PAD_MODE 10
-struct gpio_config {
- u8 gpio;
- u32 conf0;
- u32 conf1;
- u8 owner;
- u8 route;
- u8 irqen;
- u8 reset;
- u8 blink;
- u8 pirq;
-} __attribute__ ((packed));
-
-
/* For any GpioPad usage in code use GPIO_PAD type*/
typedef u32 GPIO_PAD;