fsp_baytrail: update to add the UPD_MEMDOWN_CHECK macro

- Update chipset_fsp_util.h to add the UPD_MEMDOWN_CHECK pointing into
the PcdMemoryParameters structure.  This is baytrail FSP specific, so
it's put into the chipset code instead of the 'driver' code.  Since some
of the values need to be decremented and some do not, a second parameter
was added to control this.  This macro also does not print out the
values as they are printed out separately if memory down is enabled.
- Update chipset_fsp_util.c to use the UPD_MEMDOWN_CHECK macro.  This
makes the code more standardized and easier to read.

Change-Id: I233e45db43af4726cab41f4880f1706cf8abb0b7
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7632
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>

1 files changed, 57 insertions, 84 deletions

diff --git a/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c b/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c
index 3aabdaa546..bec3c07d53 100644
--- a/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c
+++ b/src/soc/intel/fsp_baytrail/fsp/chipset_fsp_util.c
@@ -298,92 +298,65 @@ static void ConfigureDefaultUpdData(FSP_INFO_HEADER *FspInfo, UPD_DATA_REGION *U
 	printk(BIOS_DEBUG, "Xhci:\t\t\t%s\n",
 		UpdData->PcdEnableXhci?"Enabled":"Disabled");
 
-	/* set memory down parameters */
-	if (config->EnableMemoryDown != MEMORY_DOWN_DEFAULT) {
-		UpdData->PcdMemoryParameters.EnableMemoryDown
-			= config->EnableMemoryDown - MEMORY_DOWN_DISABLE;
-
-		if (config->DRAMSpeed != DRAM_SPEED_DEFAULT) {
-			UpdData->PcdMemoryParameters.DRAMSpeed
-			= config->DRAMSpeed - DRAM_SPEED_800MHZ;
-		}
-		if (config->DRAMType != DRAM_TYPE_DEFAULT) {
-			UpdData->PcdMemoryParameters.DRAMType
-			= config->DRAMType - DRAM_TYPE_DDR3;
-		}
-		if (config->DIMM0Enable != DIMM0_ENABLE_DEFAULT) {
-			UpdData->PcdMemoryParameters.DIMM0Enable
-			= config->DIMM0Enable - DIMM0_DISABLE;
-		}
-		if (config->DIMM1Enable != DIMM1_ENABLE_DEFAULT) {
-			UpdData->PcdMemoryParameters.DIMM1Enable
-			= config->DIMM1Enable - DIMM1_DISABLE;
-		}
-		if (config->DIMMDWidth != DIMM_DWIDTH_DEFAULT) {
-			UpdData->PcdMemoryParameters.DIMMDWidth
-			= config->DIMMDWidth - DIMM_DWIDTH_X8;
-		}
-		if (config->DIMMDensity != DIMM_DENSITY_DEFAULT) {
-			UpdData->PcdMemoryParameters.DIMMDensity
-			= config->DIMMDensity - DIMM_DENSITY_1G_BIT;
-		}
-		if (config->DIMMBusWidth != DIMM_BUS_WIDTH_DEFAULT) {
-			UpdData->PcdMemoryParameters.DIMMBusWidth
-			= config->DIMMBusWidth - DIMM_BUS_WIDTH_8BIT;
-		}
-		if (config->DIMMSides != DIMM_SIDES_DEFAULT) {
-			UpdData->PcdMemoryParameters.DIMMSides
-			= config->DIMMSides - DIMM_SIDES_1RANK;
-		}
-		if (config->DIMMtCL != DIMM_TCL_DEFAULT)
-			UpdData->PcdMemoryParameters.DIMMtCL		= config->DIMMtCL;
-		if (config->DIMMtRPtRCD != DIMM_TRP_TRCD_DEFAULT)
-			UpdData->PcdMemoryParameters.DIMMtRPtRCD	= config->DIMMtRPtRCD;
-		if (config->DIMMtWR != DIMM_TWR_DEFAULT)
-			UpdData->PcdMemoryParameters.DIMMtWR		= config->DIMMtWR;
-		if (config->DIMMtWTR != DIMM_TWTR_DEFAULT)
-			UpdData->PcdMemoryParameters.DIMMtWTR		= config->DIMMtWTR;
-		if (config->DIMMtRRD != DIMM_TRRD_DEFAULT)
-			UpdData->PcdMemoryParameters.DIMMtRRD		= config->DIMMtRRD;
-		if (config->DIMMtRTP != DIMM_TRTP_DEFAULT)
-			UpdData->PcdMemoryParameters.DIMMtRTP		= config->DIMMtRTP;
-		if (config->DIMMtFAW != DIMM_TFAW_DEFAULT)
-			UpdData->PcdMemoryParameters.DIMMtFAW		= config->DIMMtFAW;
+	/*
+	 * set memory down parameters
+	 * Skip setting values if memory down is disabled
+	 * Skip setting values if FSP is earlier than gold 3
+	 */
+	if (FspInfo->ImageRevision >= FSP_GOLD3_REV_ID) {
+		UPD_MEMDOWN_CHECK(EnableMemoryDown, DECREMENT_FOR_DEFAULT);
+		if (UpdData->PcdMemoryParameters.EnableMemoryDown) {
+			UPD_MEMDOWN_CHECK(DRAMSpeed,    DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DRAMType,     DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMM0Enable,  DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMM1Enable,  DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMDWidth,   DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMDensity,  DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMBusWidth, DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMSides,    DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMtCL,      NO_DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMtRPtRCD,  NO_DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMtWR,      NO_DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMtWTR,     NO_DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMtRRD,     NO_DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMtRTP,     NO_DECREMENT_FOR_DEFAULT);
+			UPD_MEMDOWN_CHECK(DIMMtFAW,     NO_DECREMENT_FOR_DEFAULT);
 
-		printk (BIOS_DEBUG,
-			"Memory Down Data Existed : %s\n"\
-			"- Speed (0: 800, 1: 1066, 2: 1333, 3: 1600): %d\n"\
-			"- Type  (0: DDR3, 1: DDR3L) : %d\n"\
-			"- DIMM0        : %s\n"\
-			"- DIMM1        : %s\n"\
-			"- Width        : x%d\n"\
-			"- Density      : %dGbit\n"
-			"- BudWidth     : %dbit\n"\
-			"- Rank #       : %d\n"\
-			"- tCL          : %02X\n"\
-			"- tRPtRCD      : %02X\n"\
-			"- tWR          : %02X\n"\
-			"- tWTR         : %02X\n"\
-			"- tRRD         : %02X\n"\
-			"- tRTP         : %02X\n"\
-			"- tFAW         : %02X\n"
-			, (UpdData->PcdMemoryParameters.EnableMemoryDown) ? "Enabled" : "Disabled"
-			, UpdData->PcdMemoryParameters.DRAMSpeed
-			, UpdData->PcdMemoryParameters.DRAMType
-			, (UpdData->PcdMemoryParameters.DIMM0Enable) ? "Enabled" : "Disabled"
-			, (UpdData->PcdMemoryParameters.DIMM1Enable) ? "Enabled" : "Disabled"
-			, 8 << (UpdData->PcdMemoryParameters.DIMMDWidth)
-			, 1 << (UpdData->PcdMemoryParameters.DIMMDensity)
-			, 8 << (UpdData->PcdMemoryParameters.DIMMBusWidth)
-			, (UpdData->PcdMemoryParameters.DIMMSides) + 1
-			, UpdData->PcdMemoryParameters.DIMMtCL
-			, UpdData->PcdMemoryParameters.DIMMtRPtRCD
-			, UpdData->PcdMemoryParameters.DIMMtWR
-			, UpdData->PcdMemoryParameters.DIMMtWTR
-			, UpdData->PcdMemoryParameters.DIMMtRRD
-			, UpdData->PcdMemoryParameters.DIMMtRTP
-			, UpdData->PcdMemoryParameters.DIMMtFAW
+			printk (BIOS_DEBUG,
+				"Memory Down Data Existed : %s\n"\
+				"- Speed (0: 800, 1: 1066, 2: 1333, 3: 1600): %d\n"\
+				"- Type  (0: DDR3, 1: DDR3L) : %d\n"\
+				"- DIMM0        : %s\n"\
+				"- DIMM1        : %s\n"\
+				"- Width        : x%d\n"\
+				"- Density      : %dGbit\n"
+				"- BudWidth     : %dbit\n"\
+				"- Rank #       : %d\n"\
+				"- tCL          : %02X\n"\
+				"- tRPtRCD      : %02X\n"\
+				"- tWR          : %02X\n"\
+				"- tWTR         : %02X\n"\
+				"- tRRD         : %02X\n"\
+				"- tRTP         : %02X\n"\
+				"- tFAW         : %02X\n"
+				, (UpdData->PcdMemoryParameters.EnableMemoryDown) ? "Enabled" : "Disabled"
+				, UpdData->PcdMemoryParameters.DRAMSpeed
+				, UpdData->PcdMemoryParameters.DRAMType
+				, (UpdData->PcdMemoryParameters.DIMM0Enable) ? "Enabled" : "Disabled"
+				, (UpdData->PcdMemoryParameters.DIMM1Enable) ? "Enabled" : "Disabled"
+				, 8 << (UpdData->PcdMemoryParameters.DIMMDWidth)
+				, 1 << (UpdData->PcdMemoryParameters.DIMMDensity)
+				, 8 << (UpdData->PcdMemoryParameters.DIMMBusWidth)
+				, (UpdData->PcdMemoryParameters.DIMMSides) + 1
+				, UpdData->PcdMemoryParameters.DIMMtCL
+				, UpdData->PcdMemoryParameters.DIMMtRPtRCD
+				, UpdData->PcdMemoryParameters.DIMMtWR
+				, UpdData->PcdMemoryParameters.DIMMtWTR
+				, UpdData->PcdMemoryParameters.DIMMtRRD
+				, UpdData->PcdMemoryParameters.DIMMtRTP
+				, UpdData->PcdMemoryParameters.DIMMtFAW
 			);
+		}
 	}
 }