soc/intel/common/{pch,sata}: Remove SATA common code driver

Right now all FSP2.0 based IA platform doesn't need this driver anymore
hence removing to avoid debug and maintenance effort.

TEST=Verified booting from SATA on SPT/CNP/ICP/TGP PCH platforms.

Change-Id: Ied3832b26ba1fdd4c30fafe8149689a01d302c3e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41674
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

4 files changed, 0 insertions, 118 deletions

diff --git a/src/soc/intel/common/block/sata/Kconfig b/src/soc/intel/common/block/sata/Kconfig
deleted file mode 100644
index 98ff6967c9..0000000000
--- a/src/soc/intel/common/block/sata/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-config SOC_INTEL_COMMON_BLOCK_SATA
-	bool
-	help
-	  Intel Processor common SATA support
-
-config SOC_AHCI_PORT_IMPLEMENTED_INVERT
-	depends on SOC_INTEL_COMMON_BLOCK_SATA
-	bool
-	help
-	  SATA PCI configuration space offset 0x92 Port
-	  implement register bit 0-2 represents respective
-	  SATA port enable status as in 0 = Disable; 1 = Enable.
-	  If this option is selected then port enable status will be
-	  inverted as in 0 = Enable; 1 = Disable.
diff --git a/src/soc/intel/common/block/sata/Makefile.inc b/src/soc/intel/common/block/sata/Makefile.inc
deleted file mode 100644
index 623d1511e1..0000000000
--- a/src/soc/intel/common/block/sata/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_SATA) += sata.c
diff --git a/src/soc/intel/common/block/sata/sata.c b/src/soc/intel/common/block/sata/sata.c
deleted file mode 100644
index d3f82edbd3..0000000000
--- a/src/soc/intel/common/block/sata/sata.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <device/mmio.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ops.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <soc/pci_devs.h>
-
-#define SATA_ABAR_PORT_IMPLEMENTED	0x0c
-#define SATA_PCI_CFG_PORT_CTL_STS	0x92
-
-static void *sata_get_ahci_bar(struct device *dev)
-{
-	uintptr_t bar;
-
-	bar = pci_read_config32(dev, PCI_BASE_ADDRESS_5);
-	return (void *)(bar & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK);
-}
-
-/*
- * SATA Port control and Status. By default, the SATA ports are set (by HW)
- * to the disabled state (e.g. bits[3:0] == '0') as a result of an initial
- * power on reset. When enabled by software as per SATA port mapping,
- * the ports can transition between the on, partial and slumber states
- * and can detect devices. When disabled, the port is in the off state and
- * can't detect any devices.
- */
-static void sata_final(struct device *dev)
-{
-	void *ahcibar = sata_get_ahci_bar(dev);
-	u8 port_impl, temp;
-
-	/* Set Bus Master */
-	pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER);
-
-	/* Read Ports Implemented (GHC_PI) */
-	port_impl = read8(ahcibar + SATA_ABAR_PORT_IMPLEMENTED);
-
-	if (CONFIG(SOC_AHCI_PORT_IMPLEMENTED_INVERT))
-		port_impl = ~port_impl;
-
-	port_impl &= 0x07; /* bit 0-2 */
-
-	/* Port enable */
-	temp = pci_read_config8(dev, SATA_PCI_CFG_PORT_CTL_STS);
-	temp |= port_impl;
-	pci_write_config8(dev, SATA_PCI_CFG_PORT_CTL_STS, temp);
-}
-
-static struct device_operations sata_ops = {
-	.read_resources		= pci_dev_read_resources,
-	.set_resources		= pci_dev_set_resources,
-	.enable_resources	= pci_dev_enable_resources,
-	.final			= sata_final,
-	.ops_pci		= &pci_dev_ops_pci,
-};
-
-static const unsigned short pci_device_ids[] = {
-	PCI_DEVICE_ID_INTEL_SPT_U_SATA,
-	PCI_DEVICE_ID_INTEL_SPT_U_Y_PREMIUM_SATA,
-	PCI_DEVICE_ID_INTEL_SPT_KBL_SATA,
-	PCI_DEVICE_ID_INTEL_LWB_SATA_AHCI,
-	PCI_DEVICE_ID_INTEL_LWB_SSATA_AHCI,
-	PCI_DEVICE_ID_INTEL_LWB_SATA_RAID,
-	PCI_DEVICE_ID_INTEL_LWB_SSATA_RAID,
-	PCI_DEVICE_ID_INTEL_LWB_SATA_AHCI_SUPER,
-	PCI_DEVICE_ID_INTEL_LWB_SSATA_AHCI_SUPER,
-	PCI_DEVICE_ID_INTEL_LWB_SATA_RAID_SUPER,
-	PCI_DEVICE_ID_INTEL_LWB_SSATA_RAID_SUPER,
-	PCI_DEVICE_ID_INTEL_LWB_SATA_ALT,
-	PCI_DEVICE_ID_INTEL_LWB_SATA_ALT_RST,
-	PCI_DEVICE_ID_INTEL_LWB_SSATA_ALT,
-	PCI_DEVICE_ID_INTEL_LWB_SSATA_ALT_RST,
-	PCI_DEVICE_ID_INTEL_CNL_SATA,
-	PCI_DEVICE_ID_INTEL_CNL_PREMIUM_SATA,
-	PCI_DEVICE_ID_INTEL_CNP_CMP_COMPAT_SATA,
-	PCI_DEVICE_ID_INTEL_CNP_H_SATA,
-	PCI_DEVICE_ID_INTEL_CNP_LP_SATA,
-	PCI_DEVICE_ID_INTEL_ICP_U_SATA,
-	PCI_DEVICE_ID_INTEL_CMP_SATA,
-	PCI_DEVICE_ID_INTEL_CMP_PREMIUM_SATA,
-	PCI_DEVICE_ID_INTEL_CMP_LP_SATA,
-	PCI_DEVICE_ID_INTEL_CMP_H_SATA,
-	PCI_DEVICE_ID_INTEL_CMP_H_HALO_SATA,
-	PCI_DEVICE_ID_INTEL_CMP_H_PREMIUM_SATA,
-	PCI_DEVICE_ID_INTEL_TGP_LP_SATA,
-	PCI_DEVICE_ID_INTEL_TGP_SATA,
-	PCI_DEVICE_ID_INTEL_TGP_PREMIUM_SATA,
-	PCI_DEVICE_ID_INTEL_TGP_COMPAT_SATA,
-	PCI_DEVICE_ID_INTEL_MCC_AHCI_SATA,
-	PCI_DEVICE_ID_INTEL_JSP_SATA_1,
-	PCI_DEVICE_ID_INTEL_JSP_SATA_2,
-	0
-};
-
-static const struct pci_driver pch_sata __pci_driver = {
-	.ops	= &sata_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
-	.devices	= pci_device_ids,
-};
diff --git a/src/soc/intel/common/pch/Kconfig b/src/soc/intel/common/pch/Kconfig
index cca65d6b2a..6e7f2f6c75 100644
--- a/src/soc/intel/common/pch/Kconfig
+++ b/src/soc/intel/common/pch/Kconfig
@@ -32,7 +32,6 @@ config PCH_SPECIFIC_OPTIONS
 	select SOC_INTEL_COMMON_BLOCK_PCR
 	select SOC_INTEL_COMMON_BLOCK_PMC
 	select SOC_INTEL_COMMON_BLOCK_RTC
-	select SOC_INTEL_COMMON_BLOCK_SATA
 	select SOC_INTEL_COMMON_BLOCK_SMBUS
 	select SOC_INTEL_COMMON_BLOCK_SPI
 	select SOC_INTEL_COMMON_BLOCK_TCO