soc/intel/alderlake: mb/intel/sm: Add tcss code

Enable FSP 'MultiPhaseSilicon' init to execute tcss configure during
silicon init.
Type-c aux lines DC bias changes are propagated from tigerlake
platform.

TEST=Verified superspeed pendrive detection on coldboot.

Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com>
Change-Id: Ifce6abb0fce20e408931b904426131a42a5a4a36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

3 files changed, 34 insertions, 17 deletions

diff --git a/src/soc/intel/alderlake/chip.h b/src/soc/intel/alderlake/chip.h
index fb9dd73730..57b78688ee 100644
--- a/src/soc/intel/alderlake/chip.h
+++ b/src/soc/intel/alderlake/chip.h
@@ -212,17 +212,14 @@ struct soc_intel_alderlake_config {
 	bool CnviBtAudioOffload;
 
 	/*
-	 * IOM Port Config
-	 * If a port orientation needs to be controlled by the SOC this setting must be
-	 * updated to reflect the correct GPIOs being used for the SOC port flipping.
-	 * There are 4 ports each with a pair of GPIOs for Pull Up and Pull Down
-	 * 0,1 are pull up and pull down for port 0
-	 * 2,3 are pull up and pull down for port 1
-	 * 4,5 are pull up and pull down for port 2
-	 * 6,7 are pull up and pull down for port 3
-	 * values to be programmed correspond to the GPIO family and offsets
+	 * These GPIOs will be programmed by the IOM to handle biasing of the
+	 * Type-C aux (SBU) signals when certain alternate modes are used.
+	 * `pad_auxn_dc` should be assigned to the GPIO pad providing negative
+	 * bias (name usually contains `AUXN_DC` or `AUX_N`); similarly,
+	 * `pad_auxp_dc` should be assigned to the GPIO providing positive bias
+	 * (name often contains `AUXP_DC` or `_AUX_P`).
 	 */
-	uint32_t IomTypeCPortPadCfg[8];
+	struct typec_aux_bias_pads typec_aux_bias_pads[MAX_TYPE_C_PORTS];
 
 	/*
 	 * SOC Aux orientation override:
diff --git a/src/soc/intel/alderlake/fsp_params.c b/src/soc/intel/alderlake/fsp_params.c
index 2ab182571e..8664fe6f46 100644
--- a/src/soc/intel/alderlake/fsp_params.c
+++ b/src/soc/intel/alderlake/fsp_params.c
@@ -12,6 +12,7 @@
 #include <intelblocks/xdci.h>
 #include <intelpch/lockdown.h>
 #include <intelblocks/mp_init.h>
+#include <intelblocks/tcss.h>
 #include <soc/gpio_soc_defs.h>
 #include <soc/intel/common/vbt.h>
 #include <soc/pci_devs.h>
@@ -94,6 +95,7 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
 	const struct microcode *microcode_file;
 	size_t microcode_len;
 	FSP_S_CONFIG *params = &supd->FspsConfig;
+	FSPS_ARCH_UPD *pfsps_arch_upd = &supd->FspsArchUpd;
 	uint32_t enable_mask;
 
 	struct device *dev;
@@ -129,8 +131,9 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
 	params->D3ColdEnable = !config->TcssD3ColdDisable;
 
 	params->TcssAuxOri = config->TcssAuxOri;
-	for (i = 0; i < 8; i++)
-		params->IomTypeCPortPadCfg[i] = config->IomTypeCPortPadCfg[i];
+
+	/* Explicitly clear this field to avoid using defaults */
+	memset(params->IomTypeCPortPadCfg, 0, sizeof(params->IomTypeCPortPadCfg));
 
 	/*
 	 * Set FSPS UPD ITbtConnectTopologyTimeoutInMs with value 0. FSP will
@@ -189,6 +192,9 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
 			params->CpuUsb3OverCurrentPin[i] = config->tcss_ports[i].ocpin;
 	}
 
+	/* EnableMultiPhaseSiliconInit for running MultiPhaseSiInit */
+	pfsps_arch_upd->EnableMultiPhaseSiliconInit = 1;
+
 	/* Enable xDCI controller if enabled in devicetree and allowed */
 	dev = pcidev_path_on_root(PCH_DEVFN_USBOTG);
 	if (dev) {
@@ -298,11 +304,6 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
 	mainboard_silicon_init_params(params);
 }
 
-int soc_fsp_multi_phase_init_is_enable(void)
-{
-	return 0;
-}
-
 /*
  * Callbacks for SoC/Mainboard specific overrides for FspMultiPhaseSiInit
  * This platform supports below MultiPhaseSIInit Phase(s):
@@ -315,6 +316,13 @@ void platform_fsp_multi_phase_init_cb(uint32_t phase_index)
 	switch (phase_index) {
 	case 1:
 		/* TCSS specific initialization here */
+		printk(BIOS_DEBUG, "FSP MultiPhaseSiInit %s/%s called\n",
+			__FILE__, __func__);
+
+		if (CONFIG(SOC_INTEL_COMMON_BLOCK_TCSS)) {
+			const config_t *config = config_of_soc();
+			tcss_configure(config->typec_aux_bias_pads);
+		}
 		break;
 	default:
 		break;
diff --git a/src/soc/intel/alderlake/include/soc/tcss.h b/src/soc/intel/alderlake/include/soc/tcss.h
new file mode 100644
index 0000000000..713528bdbb
--- /dev/null
+++ b/src/soc/intel/alderlake/include/soc/tcss.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _SOC_TCSS_H_
+#define _SOC_TCSS_H_
+
+/* IOM aux bias control registers in REGBAR MMIO space */
+#define IOM_AUX_BIAS_CTRL_PULLUP_OFFSET_0	0x1070
+#define IOM_AUX_BIAS_CTRL_PULLUP_OFFSET(x)	(IOM_AUX_BIAS_CTRL_PULLUP_OFFSET_0 + (x) * 4)
+#define IOM_AUX_BIAS_CTRL_PULLDOWN_OFFSET_0	0x1088
+#define IOM_AUX_BIAS_CTRL_PULLDOWN_OFFSET(x)	(IOM_AUX_BIAS_CTRL_PULLDOWN_OFFSET_0 + (x) * 4)
+
+#endif /* _SOC_TCSS_H_ */