diff options
author | Ionela Voinescu <ionela.voinescu@imgtec.com> | 2015-04-05 17:55:51 +0100 |
---|---|---|
committer | Stefan Reinauer <stefan.reinauer@coreboot.org> | 2015-06-12 20:19:42 +0200 |
commit | 3fa1ad0d2cb5d4a81e9e7bd0acdbc912d00f3bfe (patch) | |
tree | 12890bf9eedfb7886e325943406b80e287f475fc /src/soc/imgtec/pistachio/ddr2_init.c | |
parent | 1185c109e488c0706441527591376929809a24b2 (diff) |
pistachio: add DDR3 initialization code
Initialization for the Winbond W631GG6KB part using Synopsys
DDR uMCTL and DDR Phy.
This code adds a separate function for DDR3 initialization
and moves all the necessary defines in a separate header file.
The programming procedure that is executed at power up to bring
up the uMCTL, PHY and memories into a state where reads and
writes to the memory can be performed is the following:
1. uPCTL (Universal DDR protocol controller) initialization
The timining registers TOGCNT1U, TINIT, TOGCNT100N and TRSTH
needed for driving the memory power-up sequence are programmed
as a function of the internal timers clock frequency.
Organization (memory chip specific) values are set
(column/bank/row address width and number of ranks), together
with other static values (latency, timing, power up configuration).
All these values are static, provided by the datasheet,
being determined by the memory type, size and frequency.
2. PHY initialization
The PHY is programmed with datasheet provided values,
specifying the initialization values for it to send to the
external memory (timing parameters).
Also, delay lines (DLL) and strength of drive pads are
calibrated (based on external conditions: temperature,
voltage, noise) and locked. After that, the PHY goes
through a trainig process (also dependent on the
current conditions at boot time) to establish precise
timing configuration between the DDR clock and DQS (data strobe)
and between DQS and DQ (data).
3. Memory power up
4. Switch from configuration state to access state.
It was tested on Pistachio bring up board where DDR was initialized
properly and ramstage executed correctly
Change-Id: I3bcbce2044327a22fce09b184d85ee11228a6b2b
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: http://review.coreboot.org/10529
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/soc/imgtec/pistachio/ddr2_init.c')
-rw-r--r-- | src/soc/imgtec/pistachio/ddr2_init.c | 114 |
1 files changed, 2 insertions, 112 deletions
diff --git a/src/soc/imgtec/pistachio/ddr2_init.c b/src/soc/imgtec/pistachio/ddr2_init.c index dd09321fb0..ce10ab550d 100644 --- a/src/soc/imgtec/pistachio/ddr2_init.c +++ b/src/soc/imgtec/pistachio/ddr2_init.c @@ -18,122 +18,12 @@ * Foundation, Inc. */ -#include <arch/cpu.h> #include <arch/io.h> -#include <delay.h> #include <soc/ddr_init.h> +#include <soc/ddr_private_reg.h> #include <stdint.h> -#include <timer.h> -#define MAX_WAIT_MICROS 100000 - -#define TOPLEVEL_REGS 0xB8149000 - -#define DDR_CTRL_OFFSET (0x0020) -#define DDR_CLK_EN_MASK (0x00000002) -#define DDR_CLK_EN_SHIFT (1) -#define DDR_CLK_EN_LENGTH (1) - -#define DDR_PCTL 0xB8180000 -#define DDR_PCTL_TOGCNT1U_OFFSET (0x00C0) -#define DDR_PCTL_TINIT_OFFSET (0x00C4) -#define DDR_PCTL_TRSTH_OFFSET (0x00C8) -#define DDR_PCTL_TOGG_CNTR_100NS_OFFSET (0x00CC) -#define DDR_PCTL_MCFG_OFFSET (0x0080) -#define DDR_PCTL_MCFG1_OFFSET (0x007C) -#define DDR_PCTL_MSTAT_OFFSET (0x0088) -#define DDR_PCTL_DFISTAT0_OFFSET (0x02C0) -#define DDR_PCTL_POWCTL_OFFSET (0x0044) -#define DDR_PCTL_POWSTAT_OFFSET (0x0048) -#define DDR_PCTL_DTUAWDT_OFFSET (0x00B0) -#define DDR_PCTL_TREFI_OFFSET (0x00D0) -#define DDR_PCTL_TMRD_OFFSET (0x00D4) -#define DDR_PCTL_TRFC_OFFSET (0x00D8) -#define DDR_PCTL_TRP_OFFSET (0x00DC) -#define DDR_PCTL_TAL_OFFSET (0x00E4) -#define DDR_PCTL_TCL_OFFSET (0x00E8) -#define DDR_PCTL_TCWL_OFFSET (0x00EC) -#define DDR_PCTL_TRAS_OFFSET (0x00F0) -#define DDR_PCTL_TRC_OFFSET (0x00F4) -#define DDR_PCTL_TRCD_OFFSET (0x00F8) -#define DDR_PCTL_TRRD_OFFSET (0x00FC) -#define DDR_PCTL_TRTP_OFFSET (0x0100) -#define DDR_PCTL_TWR_OFFSET (0x0104) -#define DDR_PCTL_TWTR_OFFSET (0x0108) -#define DDR_PCTL_TEXSR_OFFSET (0x010C) -#define DDR_PCTL_TXP_OFFSET (0x0110) -#define DDR_PCTL_TDQS_OFFSET (0x0120) -#define DDR_PCTL_TXPDLL_OFFSET (0x0114) -#define DDR_PCTL_TRTW_OFFSET (0x00E0) -#define DDR_PCTL_TCKE_OFFSET (0x012C) -#define DDR_PCTL_TMOD_OFFSET (0x0130) -#define DDR_PCTL_TCKESR_OFFSET (0x0140) -#define DDR_PCTL_SCFG_OFFSET (0x0000) -#define DDR_PCTL_DFIWRLAT_OFFSET (0x0254) -#define DDR_PCTL_DFITRDDATAEN_OFFSET (0x0260) -#define DDR_PCTL_DFITPHYWRDATA_OFFSET (0x0250) -#define DDR_PCTL_DFITPHYRDLAT_OFFSET (0x0264) -#define DDR_PCTL_SCTL_OFFSET (0x0004) -#define DDR_PCTL_STAT_OFFSET (0x0008) -#define DDR_PCTL_DFISTCFG0_OFFSET (0x02C4) -#define DDR_PCTL_DFISTCFG1_OFFSET (0x02C8) -#define DDR_PCTL_DFISTCFG2_OFFSET (0x02D8) -#define DDR_PCTL_DFILPCFG0_OFFSET (0x02F0) -#define DDR_PCTL_DFIODTCFG_OFFSET (0x0244) -#define DDR_PCTL_DFIODTCFG1_OFFSET (0x0248) -#define DDR_PCTL_MCMD_OFFSET (0x0040) -#define DDR_PCTL_DFIUPDCFG_OFFSET (0x0290) -#define DDR_PCTL_CCFG_OFFSET (0x0480) -#define DDR_PCTL_DCFG_OFFSET (0x0484) -#define DDR_PCTL_PCFG0_OFFSET (0x0400) -#define DDR_PCTL_DTUWACTL_OFFSET (0x0200) -#define DDR_PCTL_DTURACTL_OFFSET (0x0204) -#define DDR_PCTL_DTUCFG_OFFSET (0x0208) -#define DDR_PCTL_DTUECTL_OFFSET (0x020C) -#define DDR_PCTL_DTUWD0_OFFSET (0x0210) -#define DDR_PCTL_DTUWD1_OFFSET (0x0214) -#define DDR_PCTL_DTUWD2_OFFSET (0x0218) -#define DDR_PCTL_DTUWD3_OFFSET (0x021C) -#define DDR_PCTL_CCFG1_OFFSET (0x048C) - -#define DDR_PHY 0xB8180800 -#define DDRPHY_PGCR_OFFSET (0x0008) -#define DDRPHY_DCR_OFFSET (0x0030) -#define DDRPHY_MR_OFFSET (0x0040) -#define DDRPHY_EMR_OFFSET (0x0044) -#define DDRPHY_EMR2_OFFSET (0x0048) -#define DDRPHY_DSGCR_OFFSET (0x002C) -#define DDRPHY_DTPR0_OFFSET (0x0034) -#define DDRPHY_DTPR1_OFFSET (0x0038) -#define DDRPHY_DTPR2_OFFSET (0x003C) -#define DDRPHY_PTR0_OFFSET (0x0018) -#define DDRPHY_PTR1_OFFSET (0x001C) -#define DDRPHY_PGSR_OFFSET (0x000C) -#define DDRPHY_PIR_OFFSET (0x0004) -#define DDRPHY_BISTRR_OFFSET (0x0100) -#define DDRPHY_BISTWCR_OFFSET (0x010C) -#define DDRPHY_BISTAR0_OFFSET (0x0114) -#define DDRPHY_BISTAR1_OFFSET (0x0118) -#define DDRPHY_BISTAR2_OFFSET (0x011C) -#define DDRPHY_BISTGSR_OFFSET (0x0124) -#define DDRPHY_BISTUDPR_OFFSET (0x0120) -#define DDRPHY_DLLGCR_OFFSET (0x0010) - -#define BL8 0 - -#define DDR_TIMEOUT_VALUE_US 100000 - -static int wait_for_completion(u32 reg, u32 exp_val) -{ - struct stopwatch sw; - - stopwatch_init_usecs_expire(&sw, DDR_TIMEOUT_VALUE_US); - while (read32(reg) != exp_val) { - if (stopwatch_expired(&sw)) - return DDR_TIMEOUT; - } - return 0; -} +#define BL8 0 /* * Configuration for the Winbond W972GG6JB-25 part using |