summaryrefslogtreecommitdiff
path: root/src/pc80
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@coresystems.de>2009-06-30 15:17:49 +0000
committerStefan Reinauer <stepan@openbios.org>2009-06-30 15:17:49 +0000
commit0867062412dd4bfe5a556e5f3fd85ba5b682d79b (patch)
tree81ca5db12b8567b48daaa23a541bfb8a5dc011f8 /src/pc80
parent9702b6bf7ec5a4fb16934f1cf2724480e2460c89 (diff)
This patch unifies the use of config options in v2 to all start with CONFIG_
It's basically done with the following script and some manual fixup: VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC` for VAR in $VARS; do find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \; done Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/pc80')
-rw-r--r--src/pc80/mc146818rtc.c16
-rw-r--r--src/pc80/mc146818rtc_early.c22
-rw-r--r--src/pc80/serial.c48
-rw-r--r--src/pc80/usbdebug_direct_serial.c4
4 files changed, 45 insertions, 45 deletions
diff --git a/src/pc80/mc146818rtc.c b/src/pc80/mc146818rtc.c
index 0baa389c1f..592a0a52f1 100644
--- a/src/pc80/mc146818rtc.c
+++ b/src/pc80/mc146818rtc.c
@@ -138,7 +138,7 @@ void rtc_init(int invalid)
printk_debug("RTC Init\n");
-#if HAVE_OPTION_TABLE
+#if CONFIG_HAVE_OPTION_TABLE
/* See if there has been a CMOS power problem. */
x = cmos_read(RTC_VALID);
cmos_invalid = !(x & RTC_VRT);
@@ -179,10 +179,10 @@ void rtc_init(int invalid)
/* Setup the frequency it operates at */
cmos_write(RTC_FREQ_SELECT_DEFAULT, RTC_FREQ_SELECT);
-#if HAVE_OPTION_TABLE
+#if CONFIG_HAVE_OPTION_TABLE
/* See if there is a LB CMOS checksum error */
- checksum_invalid = !rtc_checksum_valid(LB_CKS_RANGE_START,
- LB_CKS_RANGE_END,LB_CKS_LOC);
+ checksum_invalid = !rtc_checksum_valid(CONFIG_LB_CKS_RANGE_START,
+ CONFIG_LB_CKS_RANGE_END,CONFIG_LB_CKS_LOC);
if(checksum_invalid)
printk_debug("Invalid CMOS LB checksum\n");
@@ -196,7 +196,7 @@ void rtc_init(int invalid)
}
-#if USE_OPTION_TABLE == 1
+#if CONFIG_USE_OPTION_TABLE == 1
/* This routine returns the value of the requested bits
input bit = bit count from the beginning of the cmos image
length = number of bits to include in the value
@@ -259,9 +259,9 @@ int get_option(void *dest, char *name)
if(get_cmos_value(ce->bit, ce->length, dest))
return(-3);
- if(!rtc_checksum_valid(LB_CKS_RANGE_START,
- LB_CKS_RANGE_END,LB_CKS_LOC))
+ if(!rtc_checksum_valid(CONFIG_LB_CKS_RANGE_START,
+ CONFIG_LB_CKS_RANGE_END,CONFIG_LB_CKS_LOC))
return(-4);
return(0);
}
-#endif /* USE_OPTION_TABLE */
+#endif /* CONFIG_USE_OPTION_TABLE */
diff --git a/src/pc80/mc146818rtc_early.c b/src/pc80/mc146818rtc_early.c
index 2e3d09c8c0..6db9ec8e1a 100644
--- a/src/pc80/mc146818rtc_early.c
+++ b/src/pc80/mc146818rtc_early.c
@@ -1,11 +1,11 @@
#include <pc80/mc146818rtc.h>
#include <part/fallback_boot.h>
-#ifndef MAX_REBOOT_CNT
-#error "MAX_REBOOT_CNT not defined"
+#ifndef CONFIG_MAX_REBOOT_CNT
+#error "CONFIG_MAX_REBOOT_CNT not defined"
#endif
-#if MAX_REBOOT_CNT > 15
-#error "MAX_REBOOT_CNT too high"
+#if CONFIG_MAX_REBOOT_CNT > 15
+#error "CONFIG_MAX_REBOOT_CNT too high"
#endif
static unsigned char cmos_read(unsigned char addr)
@@ -44,14 +44,14 @@ static int cmos_chksum_valid(void)
unsigned long sum, old_sum;
sum = 0;
/* Comput the cmos checksum */
- for(addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) {
+ for(addr = CONFIG_LB_CKS_RANGE_START; addr <= CONFIG_LB_CKS_RANGE_END; addr++) {
sum += cmos_read(addr);
}
sum = (sum & 0xffff) ^ 0xffff;
/* Read the stored checksum */
- old_sum = cmos_read(LB_CKS_LOC) << 8;
- old_sum |= cmos_read(LB_CKS_LOC+1);
+ old_sum = cmos_read(CONFIG_LB_CKS_LOC) << 8;
+ old_sum |= cmos_read(CONFIG_LB_CKS_LOC+1);
return sum == old_sum;
}
@@ -75,7 +75,7 @@ static int do_normal_boot(void)
*/
byte = cmos_read(RTC_BOOT_BYTE);
byte &= 0x0c;
- byte |= MAX_REBOOT_CNT << 4;
+ byte |= CONFIG_MAX_REBOOT_CNT << 4;
cmos_write(byte, RTC_BOOT_BYTE);
}
@@ -89,12 +89,12 @@ static int do_normal_boot(void)
/* Properly set the last boot flag */
byte &= 0xfc;
- if ((byte >> 4) < MAX_REBOOT_CNT) {
+ if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) {
byte |= (1<<1);
}
/* Are we already at the max count? */
- if ((byte >> 4) < MAX_REBOOT_CNT) {
+ if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) {
byte += 1 << 4; /* No, add 1 to the count */
}
else {
@@ -109,7 +109,7 @@ static int do_normal_boot(void)
static unsigned read_option(unsigned start, unsigned size, unsigned def)
{
-#if USE_OPTION_TABLE == 1
+#if CONFIG_USE_OPTION_TABLE == 1
unsigned byte;
byte = cmos_read(start/8);
return (byte >> (start & 7U)) & ((1U << size) - 1U);
diff --git a/src/pc80/serial.c b/src/pc80/serial.c
index d2079d32ab..5136497407 100644
--- a/src/pc80/serial.c
+++ b/src/pc80/serial.c
@@ -1,27 +1,27 @@
#include <part/fallback_boot.h>
/* Base Address */
-#ifndef TTYS0_BASE
-#define TTYS0_BASE 0x3f8
+#ifndef CONFIG_TTYS0_BASE
+#define CONFIG_TTYS0_BASE 0x3f8
#endif
-#ifndef TTYS0_BAUD
-#define TTYS0_BAUD 115200
+#ifndef CONFIG_TTYS0_BAUD
+#define CONFIG_TTYS0_BAUD 115200
#endif
-#if ((115200%TTYS0_BAUD) != 0)
+#if ((115200%CONFIG_TTYS0_BAUD) != 0)
#error Bad ttys0 baud rate
#endif
-#define TTYS0_DIV (115200/TTYS0_BAUD)
+#define CONFIG_TTYS0_DIV (115200/CONFIG_TTYS0_BAUD)
/* Line Control Settings */
-#ifndef TTYS0_LCS
+#ifndef CONFIG_TTYS0_LCS
/* Set 8bit, 1 stop bit, no parity */
-#define TTYS0_LCS 0x3
+#define CONFIG_TTYS0_LCS 0x3
#endif
-#define UART_LCS TTYS0_LCS
+#define UART_LCS CONFIG_TTYS0_LCS
#if CONFIG_USE_PRINTK_IN_CAR == 0
@@ -46,7 +46,7 @@
static int uart_can_tx_byte(void)
{
- return inb(TTYS0_BASE + UART_LSR) & 0x20;
+ return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20;
}
static void uart_wait_to_tx_byte(void)
@@ -57,14 +57,14 @@ static void uart_wait_to_tx_byte(void)
static void uart_wait_until_sent(void)
{
- while(!(inb(TTYS0_BASE + UART_LSR) & 0x40))
+ while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40))
;
}
static void uart_tx_byte(unsigned char data)
{
uart_wait_to_tx_byte();
- outb(data, TTYS0_BASE + UART_TBR);
+ outb(data, CONFIG_TTYS0_BASE + UART_TBR);
/* Make certain the data clears the fifos */
uart_wait_until_sent();
}
@@ -72,24 +72,24 @@ static void uart_tx_byte(unsigned char data)
static void uart_init(void)
{
/* disable interrupts */
- outb(0x0, TTYS0_BASE + UART_IER);
+ outb(0x0, CONFIG_TTYS0_BASE + UART_IER);
/* enable fifo's */
- outb(0x01, TTYS0_BASE + UART_FCR);
+ outb(0x01, CONFIG_TTYS0_BASE + UART_FCR);
/* Set Baud Rate Divisor to 12 ==> 115200 Baud */
- outb(0x80 | UART_LCS, TTYS0_BASE + UART_LCR);
-#if USE_OPTION_TABLE == 1
+ outb(0x80 | UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
+#if CONFIG_USE_OPTION_TABLE == 1
static const unsigned char divisor[] = { 1,2,3,6,12,24,48,96 };
unsigned ttys0_div, ttys0_index;
ttys0_index = read_option(CMOS_VSTART_baud_rate, CMOS_VLEN_baud_rate, 0);
ttys0_index &= 7;
ttys0_div = divisor[ttys0_index];
- outb(ttys0_div & 0xff, TTYS0_BASE + UART_DLL);
- outb(0, TTYS0_BASE + UART_DLM);
+ outb(ttys0_div & 0xff, CONFIG_TTYS0_BASE + UART_DLL);
+ outb(0, CONFIG_TTYS0_BASE + UART_DLM);
#else
- outb(TTYS0_DIV & 0xFF, TTYS0_BASE + UART_DLL);
- outb((TTYS0_DIV >> 8) & 0xFF, TTYS0_BASE + UART_DLM);
+ outb(CONFIG_TTYS0_DIV & 0xFF, CONFIG_TTYS0_BASE + UART_DLL);
+ outb((CONFIG_TTYS0_DIV >> 8) & 0xFF, CONFIG_TTYS0_BASE + UART_DLM);
#endif
- outb(UART_LCS, TTYS0_BASE + UART_LCR);
+ outb(UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
}
#else
@@ -98,15 +98,15 @@ static void uart_init(void)
extern void uart8250_init(unsigned base_port, unsigned divisor, unsigned lcs);
void uart_init(void)
{
-#if USE_OPTION_TABLE == 1
+#if CONFIG_USE_OPTION_TABLE == 1
static const unsigned char divisor[] = { 1,2,3,6,12,24,48,96 };
unsigned ttys0_div, ttys0_index;
ttys0_index = read_option(CMOS_VSTART_baud_rate, CMOS_VLEN_baud_rate, 0);
ttys0_index &= 7;
ttys0_div = divisor[ttys0_index];
- uart8250_init(TTYS0_BASE, ttys0_div, UART_LCS);
+ uart8250_init(CONFIG_TTYS0_BASE, ttys0_div, UART_LCS);
#else
- uart8250_init(TTYS0_BASE, TTYS0_DIV, UART_LCS);
+ uart8250_init(CONFIG_TTYS0_BASE, CONFIG_TTYS0_DIV, UART_LCS);
#endif
}
#endif
diff --git a/src/pc80/usbdebug_direct_serial.c b/src/pc80/usbdebug_direct_serial.c
index e795349a22..604294bf1c 100644
--- a/src/pc80/usbdebug_direct_serial.c
+++ b/src/pc80/usbdebug_direct_serial.c
@@ -3,14 +3,14 @@
static void early_usbdebug_direct_init(void)
{
struct ehci_debug_info *dbg_info =
- (struct ehci_debug_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - sizeof (struct ehci_debug_info));
+ (struct ehci_debug_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - sizeof (struct ehci_debug_info));
usbdebug_direct_init(EHCI_BAR, EHCI_DEBUG_OFFSET, dbg_info);
}
void usbdebug_direct_tx_byte(unsigned char data)
{
struct ehci_debug_info *dbg_info;
- dbg_info = (struct ehci_debug_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - sizeof (struct ehci_debug_info)); // in Cache
+ dbg_info = (struct ehci_debug_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - sizeof (struct ehci_debug_info)); // in Cache
if (dbg_info->ehci_debug) {
dbgp_bulk_write_x(dbg_info, &data, 1);
}