From 0867062412dd4bfe5a556e5f3fd85ba5b682d79b Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Tue, 30 Jun 2009 15:17:49 +0000 Subject: This patch unifies the use of config options in v2 to all start with CONFIG_ It's basically done with the following script and some manual fixup: VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC` for VAR in $VARS; do find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \; done Signed-off-by: Stefan Reinauer Acked-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/pc80/mc146818rtc.c | 16 ++++++------- src/pc80/mc146818rtc_early.c | 22 +++++++++--------- src/pc80/serial.c | 48 +++++++++++++++++++-------------------- src/pc80/usbdebug_direct_serial.c | 4 ++-- 4 files changed, 45 insertions(+), 45 deletions(-) (limited to 'src/pc80') diff --git a/src/pc80/mc146818rtc.c b/src/pc80/mc146818rtc.c index 0baa389c1f..592a0a52f1 100644 --- a/src/pc80/mc146818rtc.c +++ b/src/pc80/mc146818rtc.c @@ -138,7 +138,7 @@ void rtc_init(int invalid) printk_debug("RTC Init\n"); -#if HAVE_OPTION_TABLE +#if CONFIG_HAVE_OPTION_TABLE /* See if there has been a CMOS power problem. */ x = cmos_read(RTC_VALID); cmos_invalid = !(x & RTC_VRT); @@ -179,10 +179,10 @@ void rtc_init(int invalid) /* Setup the frequency it operates at */ cmos_write(RTC_FREQ_SELECT_DEFAULT, RTC_FREQ_SELECT); -#if HAVE_OPTION_TABLE +#if CONFIG_HAVE_OPTION_TABLE /* See if there is a LB CMOS checksum error */ - checksum_invalid = !rtc_checksum_valid(LB_CKS_RANGE_START, - LB_CKS_RANGE_END,LB_CKS_LOC); + checksum_invalid = !rtc_checksum_valid(CONFIG_LB_CKS_RANGE_START, + CONFIG_LB_CKS_RANGE_END,CONFIG_LB_CKS_LOC); if(checksum_invalid) printk_debug("Invalid CMOS LB checksum\n"); @@ -196,7 +196,7 @@ void rtc_init(int invalid) } -#if USE_OPTION_TABLE == 1 +#if CONFIG_USE_OPTION_TABLE == 1 /* This routine returns the value of the requested bits input bit = bit count from the beginning of the cmos image length = number of bits to include in the value @@ -259,9 +259,9 @@ int get_option(void *dest, char *name) if(get_cmos_value(ce->bit, ce->length, dest)) return(-3); - if(!rtc_checksum_valid(LB_CKS_RANGE_START, - LB_CKS_RANGE_END,LB_CKS_LOC)) + if(!rtc_checksum_valid(CONFIG_LB_CKS_RANGE_START, + CONFIG_LB_CKS_RANGE_END,CONFIG_LB_CKS_LOC)) return(-4); return(0); } -#endif /* USE_OPTION_TABLE */ +#endif /* CONFIG_USE_OPTION_TABLE */ diff --git a/src/pc80/mc146818rtc_early.c b/src/pc80/mc146818rtc_early.c index 2e3d09c8c0..6db9ec8e1a 100644 --- a/src/pc80/mc146818rtc_early.c +++ b/src/pc80/mc146818rtc_early.c @@ -1,11 +1,11 @@ #include #include -#ifndef MAX_REBOOT_CNT -#error "MAX_REBOOT_CNT not defined" +#ifndef CONFIG_MAX_REBOOT_CNT +#error "CONFIG_MAX_REBOOT_CNT not defined" #endif -#if MAX_REBOOT_CNT > 15 -#error "MAX_REBOOT_CNT too high" +#if CONFIG_MAX_REBOOT_CNT > 15 +#error "CONFIG_MAX_REBOOT_CNT too high" #endif static unsigned char cmos_read(unsigned char addr) @@ -44,14 +44,14 @@ static int cmos_chksum_valid(void) unsigned long sum, old_sum; sum = 0; /* Comput the cmos checksum */ - for(addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) { + for(addr = CONFIG_LB_CKS_RANGE_START; addr <= CONFIG_LB_CKS_RANGE_END; addr++) { sum += cmos_read(addr); } sum = (sum & 0xffff) ^ 0xffff; /* Read the stored checksum */ - old_sum = cmos_read(LB_CKS_LOC) << 8; - old_sum |= cmos_read(LB_CKS_LOC+1); + old_sum = cmos_read(CONFIG_LB_CKS_LOC) << 8; + old_sum |= cmos_read(CONFIG_LB_CKS_LOC+1); return sum == old_sum; } @@ -75,7 +75,7 @@ static int do_normal_boot(void) */ byte = cmos_read(RTC_BOOT_BYTE); byte &= 0x0c; - byte |= MAX_REBOOT_CNT << 4; + byte |= CONFIG_MAX_REBOOT_CNT << 4; cmos_write(byte, RTC_BOOT_BYTE); } @@ -89,12 +89,12 @@ static int do_normal_boot(void) /* Properly set the last boot flag */ byte &= 0xfc; - if ((byte >> 4) < MAX_REBOOT_CNT) { + if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) { byte |= (1<<1); } /* Are we already at the max count? */ - if ((byte >> 4) < MAX_REBOOT_CNT) { + if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) { byte += 1 << 4; /* No, add 1 to the count */ } else { @@ -109,7 +109,7 @@ static int do_normal_boot(void) static unsigned read_option(unsigned start, unsigned size, unsigned def) { -#if USE_OPTION_TABLE == 1 +#if CONFIG_USE_OPTION_TABLE == 1 unsigned byte; byte = cmos_read(start/8); return (byte >> (start & 7U)) & ((1U << size) - 1U); diff --git a/src/pc80/serial.c b/src/pc80/serial.c index d2079d32ab..5136497407 100644 --- a/src/pc80/serial.c +++ b/src/pc80/serial.c @@ -1,27 +1,27 @@ #include /* Base Address */ -#ifndef TTYS0_BASE -#define TTYS0_BASE 0x3f8 +#ifndef CONFIG_TTYS0_BASE +#define CONFIG_TTYS0_BASE 0x3f8 #endif -#ifndef TTYS0_BAUD -#define TTYS0_BAUD 115200 +#ifndef CONFIG_TTYS0_BAUD +#define CONFIG_TTYS0_BAUD 115200 #endif -#if ((115200%TTYS0_BAUD) != 0) +#if ((115200%CONFIG_TTYS0_BAUD) != 0) #error Bad ttys0 baud rate #endif -#define TTYS0_DIV (115200/TTYS0_BAUD) +#define CONFIG_TTYS0_DIV (115200/CONFIG_TTYS0_BAUD) /* Line Control Settings */ -#ifndef TTYS0_LCS +#ifndef CONFIG_TTYS0_LCS /* Set 8bit, 1 stop bit, no parity */ -#define TTYS0_LCS 0x3 +#define CONFIG_TTYS0_LCS 0x3 #endif -#define UART_LCS TTYS0_LCS +#define UART_LCS CONFIG_TTYS0_LCS #if CONFIG_USE_PRINTK_IN_CAR == 0 @@ -46,7 +46,7 @@ static int uart_can_tx_byte(void) { - return inb(TTYS0_BASE + UART_LSR) & 0x20; + return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20; } static void uart_wait_to_tx_byte(void) @@ -57,14 +57,14 @@ static void uart_wait_to_tx_byte(void) static void uart_wait_until_sent(void) { - while(!(inb(TTYS0_BASE + UART_LSR) & 0x40)) + while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40)) ; } static void uart_tx_byte(unsigned char data) { uart_wait_to_tx_byte(); - outb(data, TTYS0_BASE + UART_TBR); + outb(data, CONFIG_TTYS0_BASE + UART_TBR); /* Make certain the data clears the fifos */ uart_wait_until_sent(); } @@ -72,24 +72,24 @@ static void uart_tx_byte(unsigned char data) static void uart_init(void) { /* disable interrupts */ - outb(0x0, TTYS0_BASE + UART_IER); + outb(0x0, CONFIG_TTYS0_BASE + UART_IER); /* enable fifo's */ - outb(0x01, TTYS0_BASE + UART_FCR); + outb(0x01, CONFIG_TTYS0_BASE + UART_FCR); /* Set Baud Rate Divisor to 12 ==> 115200 Baud */ - outb(0x80 | UART_LCS, TTYS0_BASE + UART_LCR); -#if USE_OPTION_TABLE == 1 + outb(0x80 | UART_LCS, CONFIG_TTYS0_BASE + UART_LCR); +#if CONFIG_USE_OPTION_TABLE == 1 static const unsigned char divisor[] = { 1,2,3,6,12,24,48,96 }; unsigned ttys0_div, ttys0_index; ttys0_index = read_option(CMOS_VSTART_baud_rate, CMOS_VLEN_baud_rate, 0); ttys0_index &= 7; ttys0_div = divisor[ttys0_index]; - outb(ttys0_div & 0xff, TTYS0_BASE + UART_DLL); - outb(0, TTYS0_BASE + UART_DLM); + outb(ttys0_div & 0xff, CONFIG_TTYS0_BASE + UART_DLL); + outb(0, CONFIG_TTYS0_BASE + UART_DLM); #else - outb(TTYS0_DIV & 0xFF, TTYS0_BASE + UART_DLL); - outb((TTYS0_DIV >> 8) & 0xFF, TTYS0_BASE + UART_DLM); + outb(CONFIG_TTYS0_DIV & 0xFF, CONFIG_TTYS0_BASE + UART_DLL); + outb((CONFIG_TTYS0_DIV >> 8) & 0xFF, CONFIG_TTYS0_BASE + UART_DLM); #endif - outb(UART_LCS, TTYS0_BASE + UART_LCR); + outb(UART_LCS, CONFIG_TTYS0_BASE + UART_LCR); } #else @@ -98,15 +98,15 @@ static void uart_init(void) extern void uart8250_init(unsigned base_port, unsigned divisor, unsigned lcs); void uart_init(void) { -#if USE_OPTION_TABLE == 1 +#if CONFIG_USE_OPTION_TABLE == 1 static const unsigned char divisor[] = { 1,2,3,6,12,24,48,96 }; unsigned ttys0_div, ttys0_index; ttys0_index = read_option(CMOS_VSTART_baud_rate, CMOS_VLEN_baud_rate, 0); ttys0_index &= 7; ttys0_div = divisor[ttys0_index]; - uart8250_init(TTYS0_BASE, ttys0_div, UART_LCS); + uart8250_init(CONFIG_TTYS0_BASE, ttys0_div, UART_LCS); #else - uart8250_init(TTYS0_BASE, TTYS0_DIV, UART_LCS); + uart8250_init(CONFIG_TTYS0_BASE, CONFIG_TTYS0_DIV, UART_LCS); #endif } #endif diff --git a/src/pc80/usbdebug_direct_serial.c b/src/pc80/usbdebug_direct_serial.c index e795349a22..604294bf1c 100644 --- a/src/pc80/usbdebug_direct_serial.c +++ b/src/pc80/usbdebug_direct_serial.c @@ -3,14 +3,14 @@ static void early_usbdebug_direct_init(void) { struct ehci_debug_info *dbg_info = - (struct ehci_debug_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - sizeof (struct ehci_debug_info)); + (struct ehci_debug_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - sizeof (struct ehci_debug_info)); usbdebug_direct_init(EHCI_BAR, EHCI_DEBUG_OFFSET, dbg_info); } void usbdebug_direct_tx_byte(unsigned char data) { struct ehci_debug_info *dbg_info; - dbg_info = (struct ehci_debug_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - sizeof (struct ehci_debug_info)); // in Cache + dbg_info = (struct ehci_debug_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - sizeof (struct ehci_debug_info)); // in Cache if (dbg_info->ehci_debug) { dbgp_bulk_write_x(dbg_info, &data, 1); } -- cgit v1.2.3