diff options
author | Rudolf Marek <r.marek@assembler.cz> | 2010-11-22 22:00:52 +0000 |
---|---|---|
committer | Rudolf Marek <r.marek@assembler.cz> | 2010-11-22 22:00:52 +0000 |
commit | bcaea142f344389ed0c1857f53b7c8556a804c8d (patch) | |
tree | fc693f89ea3e374f7d62dfdaabd46f946350af63 /src/northbridge/amd/amdk8/raminit_f_dqs.c | |
parent | 9b5295f522fa08b84d222ba08f5801d8e812dbc6 (diff) |
1) wraps the s3 parts of chipset code/memory init code with if CONFIG_HAVE_ACPI_RESUME == 1 getting rid of ugly define in romstage.c
2) the patch implements get_cbmem_toc in chipset specific way if defined.
On Intel targets it should be unchanged. On K8T890 the the cbmem_toc is read from NVRAM. Why you ask? Because we cannot do it as on intel, because the framebuffer might be there making it hard to look for it in memory (and remember we need it so early that everying is uncached)
3) The patch removes hardcoded limits for suspend/resume save area (it was 1MB) on intel. Now it computes right numbers itself.
4) it impelements saving the memory during CAR to reserved range in sane way. First the sysinfo area (CAR data) is copied, then the rest after car is disabled (cached copy is used). I changed bit also the the copy of CAR area is now done uncached for target which I feel is more right.
I think I did not change the Intel suspend/resume behaviour but best would be if someone can test it. Please note this patch was unfinished on my drive since ages and it would be very nice to get it in to prevent bit rotten it again.
Now I feel it is done good way and should not break anything. I did a test with abuild and it seems fine.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6117 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/amd/amdk8/raminit_f_dqs.c')
-rw-r--r-- | src/northbridge/amd/amdk8/raminit_f_dqs.c | 23 |
1 files changed, 4 insertions, 19 deletions
diff --git a/src/northbridge/amd/amdk8/raminit_f_dqs.c b/src/northbridge/amd/amdk8/raminit_f_dqs.c index 5303a67b32..8ddd44fadb 100644 --- a/src/northbridge/amd/amdk8/raminit_f_dqs.c +++ b/src/northbridge/amd/amdk8/raminit_f_dqs.c @@ -1826,25 +1826,7 @@ static void set_sysinfo_in_ram(unsigned val) set_htic_bit(0, val, 9); } -#ifdef S3_NVRAM_EARLY -// Don't define these prototypes as the real functions are already included -// at this point. -// -//int s3_save_nvram_early(u32 dword, int size, int nvram_pos); -//int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos); -#else -static inline int s3_save_nvram_early(u32 dword, int size, int nvram_pos) -{ - return nvram_pos; -} - -static inline int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) -{ - die("No memory NVRAM loader for DQS data! Unable to restore memory state\n"); - - return nvram_pos; /* Make GCC happy */ -} -#endif +#if CONFIG_HAVE_ACPI_RESUME == 1 #if CONFIG_MEM_TRAIN_SEQ == 0 static int save_index_to_pos(unsigned int dev, int size, int index, int nvram_pos) @@ -1930,6 +1912,7 @@ static void dqs_restore_MC_NVRAM(unsigned int dev) reg |= pci_read_config32(dev, DRAM_CONFIG_HIGH); pci_write_config32(dev, DRAM_CONFIG_HIGH, reg); } +#endif #if CONFIG_MEM_TRAIN_SEQ == 0 #if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 @@ -1998,7 +1981,9 @@ static void dqs_timing(int controllers, const struct mem_controller *ctrl, struc if(train_DqsRcvrEn(ctrl+i, 2, sysinfo)) goto out; printk(BIOS_DEBUG, " done\n"); sysinfo->mem_trained[i]=1; +#if CONFIG_HAVE_ACPI_RESUME == 1 dqs_save_MC_NVRAM((ctrl+i)->f2); +#endif } out: |