mb/goog/brya/var/skolas: sync slolas overridetree with brya0

Skolas uses brya0 schematic, so override tree should be almost the same
for brya0 and skolas.  This change sync's the skolas overridetree.cb
with brya0's overridetree.cb.

BUG=b:311722825
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas to
kernel.

Change-Id: I14a2ed803a8ffb8614018af587c66034fb724b38
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>

1 files changed, 81 insertions, 6 deletions

diff --git a/src/mainboard/google/brya/variants/skolas/overridetree.cb b/src/mainboard/google/brya/variants/skolas/overridetree.cb
index 388ea4f053..bb6d1eac08 100644
--- a/src/mainboard/google/brya/variants/skolas/overridetree.cb
+++ b/src/mainboard/google/brya/variants/skolas/overridetree.cb
@@ -132,7 +132,7 @@ chip soc/intel/alderlake
 				# TCP1 (DP-2) for port C1
 				register "device[3].name" = ""DD03""
 				register "device[3].use_pld" = "true"
-                                register "device[3].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
+				register "device[3].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
 				# TCP2 (DP-3) for port C2
 				register "device[4].name" = ""DD04""
 				register "device[4].use_pld" = "true"
@@ -548,7 +548,9 @@ chip soc/intel/alderlake
 				register "link_freq[1]" = "180 * MHz" # 180 MHz
 				register "remote_name" = ""IPU0""
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
 				register "has_power_resource" = "1"
+
 				#Controls
 				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
 				register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
@@ -582,9 +584,23 @@ chip soc/intel/alderlake
 				register "chip_name" = ""DW9768 VCM""
 				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
 				register "vcm_compat" = ""dongwoon,dw9768""
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 0C on
 					probe WFC WFC_MIPI_OVTI8856
 				end
@@ -595,7 +611,6 @@ chip soc/intel/alderlake
 				register "chip_name" = ""AT24 EEPROM""
 				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
 				register "nvm_compat" = ""atmel,24c1024""
 
 				register "nvm_size" = "0x2800"
@@ -603,6 +618,21 @@ chip soc/intel/alderlake
 				register "nvm_readonly" = "0x01"
 				register "nvm_width" = "0x10"
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 58 on
 					probe WFC WFC_MIPI_OVTI8856
 				end
@@ -623,6 +653,8 @@ chip soc/intel/alderlake
 				register "link_freq[1]" = "180 * MHz" # 180 MHz
 				register "remote_name" = ""IPU0""
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
+
 				register "has_power_resource" = "1"
 				#Controls
 				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
@@ -657,9 +689,23 @@ chip soc/intel/alderlake
 				register "chip_name" = ""DW AF DAC""
 				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
 				register "vcm_compat" = ""dongwoon,dw9714""
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 0C on
 					probe WFC WFC_MIPI_KBAE350
 				end
@@ -670,7 +716,6 @@ chip soc/intel/alderlake
 				register "chip_name" = ""GT24C08""
 				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC""
 				register "nvm_compat" = ""atmel,24c08""
 
 				register "nvm_size" = "0x2000"
@@ -678,6 +723,21 @@ chip soc/intel/alderlake
 				register "nvm_readonly" = "0x01"
 				register "nvm_width" = "0x10"
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 50 on
 					probe WFC WFC_MIPI_KBAE350
 				end
@@ -800,6 +860,7 @@ chip soc/intel/alderlake
 				register "link_freq[0]" = "384 * MHz" # 384 MHz
 				register "link_freq[1]" = "96 * MHz" # 96 MHz
 				register "remote_name" = ""IPU0""
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
 
 				register "has_power_resource" = "1"
 				#Controls
@@ -834,7 +895,6 @@ chip soc/intel/alderlake
 				register "chip_name" = ""GT24C16S""
 				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
 
-				register "pr0" = ""\\_SB.PCI0.I2C2.CAM1.PRIC""
 				register "nvm_compat" = ""atmel,24c1024""
 
 				register "nvm_size" = "0x800"
@@ -842,6 +902,21 @@ chip soc/intel/alderlake
 				register "nvm_readonly" = "0x01"
 				register "nvm_width" = "0x08"
 
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
 				device i2c 50 on
 					probe UFC UFC_MIPI_IMX208
 				end