diff options
| author | Julius Werner <jwerner@chromium.org> | 2021-01-21 14:40:59 -0800 |
|---|---|---|
| committer | Patrick Georgi <pgeorgi@google.com> | 2021-01-25 08:55:44 +0000 |
| commit | ac80610b510e5e1d270b711bbc9632e3ab30f5de (patch) | |
| tree | e3b0d9732968a8c37a0a6af5c3977cc226b466da /src/mainboard | |
| parent | ce66cd3e496b3df5775822942fa1540f3f8f9b41 (diff) | |
trogdor: Explicitly initialize display pins in bootblock
This patch adds explicit initializations for the remaining named display
(power) control GPIOs to the bootblock GPIO init code. These pins are
usually mapped to pins that are already configured to pull-downs on
power-on reset so this wasn't really required, but we have already moved
them around so often that you never know when EEs might one day move
them to a pin with a different power-on reset configuration, so it's
better to be explicit.
In one particular case, GPIO(67) (used by CoachZ rev1+ but not by
anything else for the EN_PP3300_DX_EDP pin) is not actually a pull-down
on boot, even though that is claimed by the datasheet. This is likely
due to the fact that it can serve as the SPI_HOLD pin for the boot flash
QSPI bus, so even though our board's boot flash doesn't really use that
pin, it seems that the boot ROM still configures it as such.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I533baa962d2dfc87cfa510f442ed2e8912e0e5b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: mturney mturney <mturney@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/google/trogdor/chromeos.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/src/mainboard/google/trogdor/chromeos.c b/src/mainboard/google/trogdor/chromeos.c index e93432f853..d6b1836f9d 100644 --- a/src/mainboard/google/trogdor/chromeos.c +++ b/src/mainboard/google/trogdor/chromeos.c @@ -13,6 +13,8 @@ void setup_chromeos_gpios(void) gpio_input_irq(GPIO_H1_AP_INT, IRQ_TYPE_RISING_EDGE, GPIO_PULL_UP); gpio_output(GPIO_AMP_ENABLE, 0); gpio_output(GPIO_BACKLIGHT_ENABLE, 0); + gpio_output(GPIO_EN_PP3300_DX_EDP, 0); + gpio_output(GPIO_EDP_BRIDGE_ENABLE, 0); } void fill_lb_gpios(struct lb_gpios *gpios) |