summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorEric Biederman <ebiederm@xmission.com>2003-06-11 21:55:00 +0000
committerEric Biederman <ebiederm@xmission.com>2003-06-11 21:55:00 +0000
commit05f26fcb571340b17beaca16939a025a9c0b4cdd (patch)
treea8c830fedbd545bf11c72c6d20b9e0715ffb6fdf /src/mainboard
parentc927b022c23a55e84d5d6aaac1deb7b95e25a878 (diff)
- Factoring of auto.c
- Implementation of fallback/normal support for the amd solo board - Minor bugfix in romcc git-svn-id: svn://svn.coreboot.org/coreboot/trunk@867 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/amd/solo/auto.c1670
-rw-r--r--src/mainboard/amd/solo/failover.c26
2 files changed, 99 insertions, 1597 deletions
diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c
index c2d5b88190..906c3f9137 100644
--- a/src/mainboard/amd/solo/auto.c
+++ b/src/mainboard/amd/solo/auto.c
@@ -5,807 +5,10 @@
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
-
-static void die(const char *str)
-{
- print_emerg(str);
- do {
- hlt();
- } while(1);
-}
-
-#define MEMORY_512MB 0 /* SuSE Solo configuration */
-#define MEMORY_1024MB 1 /* LNXI Solo configuration */
-
-static void sdram_set_registers(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
-#endif
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
-#endif
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
-#endif
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
- /* DRAM CS Base Address i Registers
- * F2:0x40 i = 0
- * F2:0x44 i = 1
- * F2:0x48 i = 2
- * F2:0x4C i = 3
- * F2:0x50 i = 4
- * F2:0x54 i = 5
- * F2:0x58 i = 6
- * F2:0x5C i = 7
- * [ 0: 0] Chip-Select Bank Enable
- * 0 = Bank Disabled
- * 1 = Bank Enabled
- * [ 8: 1] Reserved
- * [15: 9] Base Address (19-13)
- * An optimization used when all DIMM are the same size...
- * [20:16] Reserved
- * [31:21] Base Address (35-25)
- * This field defines the top 11 addresses bit of a 40-bit
- * address that define the memory address space. These
- * bits decode 32-MByte blocks of memory.
- */
- PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000001,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x01000001,
- PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x02000001,
- PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x03000001,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00800001,
- PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x01000001,
- PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x01800001,
-#endif
- PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000,
- /* DRAM CS Mask Address i Registers
- * F2:0x60 i = 0
- * F2:0x64 i = 1
- * F2:0x68 i = 2
- * F2:0x6C i = 3
- * F2:0x70 i = 4
- * F2:0x74 i = 5
- * F2:0x78 i = 6
- * F2:0x7C i = 7
- * Select bits to exclude from comparison with the DRAM Base address register.
- * [ 8: 0] Reserved
- * [15: 9] Address Mask (19-13)
- * Address to be excluded from the optimized case
- * [20:16] Reserved
- * [29:21] Address Mask (33-25)
- * The bits with an address mask of 1 are excluded from address comparison
- * [31:30] Reserved
- *
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00e0fe00,
- PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00e0fe00,
- PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00e0fe00,
- PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00e0fe00,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x0060fe00,
- PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x0060fe00,
- PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x0060fe00,
- PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x0060fe00,
-#endif
- PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000,
- PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000,
- /* DRAM Bank Address Mapping Register
- * F2:0x80
- * Specify the memory module size
- * [ 2: 0] CS1/0
- * [ 6: 4] CS3/2
- * [10: 8] CS5/4
- * [14:12] CS7/6
- * 000 = 32Mbyte (Rows = 12 & Col = 8)
- * 001 = 64Mbyte (Rows = 12 & Col = 9)
- * 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10)
- * 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11)
- * 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10)
- * 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12)
- * 110 = 2Gbyte (Rows = 14 & Col = 12)
- * 111 = reserved
- * [ 3: 3] Reserved
- * [ 7: 7] Reserved
- * [11:11] Reserved
- * [31:15]
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000033,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000022,
-#endif
- /* DRAM Timing Low Register
- * F2:0x88
- * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid)
- * 000 = reserved
- * 001 = CL 2
- * 010 = CL 3
- * 011 = reserved
- * 100 = reserved
- * 101 = CL 2.5
- * 110 = reserved
- * 111 = reserved
- * [ 3: 3] Reserved
- * [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh)
- * 0000 = 7 bus clocks
- * 0001 = 8 bus clocks
- * ...
- * 1110 = 21 bus clocks
- * 1111 = 22 bus clocks
- * [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh)
- * 0000 = 9 bus clocks
- * 0010 = 10 bus clocks
- * ....
- * 1110 = 23 bus clocks
- * 1111 = 24 bus clocks
- * [14:12] Trcd (Ras#-active to Case#-read/write Delay)
- * 000 = reserved
- * 001 = reserved
- * 010 = 2 bus clocks
- * 011 = 3 bus clocks
- * 100 = 4 bus clocks
- * 101 = 5 bus clocks
- * 110 = 6 bus clocks
- * 111 = reserved
- * [15:15] Reserved
- * [18:16] Trrd (Ras# to Ras# Delay)
- * 000 = reserved
- * 001 = reserved
- * 010 = 2 bus clocks
- * 011 = 3 bus clocks
- * 100 = 4 bus clocks
- * 101 = reserved
- * 110 = reserved
- * 111 = reserved
- * [19:19] Reserved
- * [23:20] Tras (Minmum Ras# Active Time)
- * 0000 to 0100 = reserved
- * 0101 = 5 bus clocks
- * ...
- * 1111 = 15 bus clocks
- * [26:24] Trp (Row Precharge Time)
- * 000 = reserved
- * 001 = reserved
- * 010 = 2 bus clocks
- * 011 = 3 bus clocks
- * 100 = 4 bus clocks
- * 101 = 5 bus clocks
- * 110 = 6 bus clocks
- * 111 = reserved
- * [27:27] Reserved
- * [28:28] Twr (Write Recovery Time)
- * 0 = 2 bus clocks
- * 1 = 3 bus clocks
- * [31:29] Reserved
- */
- PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x03623125,
- /* DRAM Timing High Register
- * F2:0x8C
- * [ 0: 0] Twtr (Write to Read Delay)
- * 0 = 1 bus Clocks
- * 1 = 2 bus Clocks
- * [ 3: 1] Reserved
- * [ 6: 4] Trwf (Read to Write Delay)
- * 000 = 1 bus clocks
- * 001 = 2 bus clocks
- * 010 = 3 bus clocks
- * 011 = 4 bus clocks
- * 100 = 5 bus clocks
- * 101 = 6 bus clocks
- * 110 = reserved
- * 111 = reserved
- * [ 7: 7] Reserved
- * [12: 8] Tref (Refresh Rate)
- * 00000 = 100Mhz 4K rows
- * 00001 = 133Mhz 4K rows
- * 00010 = 166Mhz 4K rows
- * 01000 = 100Mhz 8K/16K rows
- * 01001 = 133Mhz 8K/16K rows
- * 01010 = 166Mhz 8K/16K rows
- * [19:13] Reserved
- * [22:20] Twcl (Write CAS Latency)
- * 000 = 1 Mem clock after CAS# (Unbuffered Dimms)
- * 001 = 2 Mem clocks after CAS# (Registered Dimms)
- * [31:23] Reserved
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000930,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000130,
-#endif
-
- /* DRAM Config Low Register
- * F2:0x90
- * [ 0: 0] DLL Disable
- * 0 = Enabled
- * 1 = Disabled
- * [ 1: 1] D_DRV
- * 0 = Normal Drive
- * 1 = Weak Drive
- * [ 2: 2] QFC_EN
- * 0 = Disabled
- * 1 = Enabled
- * [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully)
- * 0 = Enable DQS input filter
- * 1 = Disable DQS input filtering
- * [ 7: 4] Reserved
- * [ 8: 8] DRAM_Init
- * 0 = Initialization done or not yet started.
- * 1 = Initiate DRAM intialization sequence
- * [ 9: 9] SO-Dimm Enable
- * 0 = Do nothing
- * 1 = SO-Dimms present
- * [10:10] DramEnable
- * 0 = DRAM not enabled
- * 1 = DRAM initialized and enabled
- * [11:11] Memory Clear Status
- * 0 = Memory Clear function has not completed
- * 1 = Memory Clear function has completed
- * [12:12] Exit Self-Refresh
- * 0 = Exit from self-refresh done or not yet started
- * 1 = DRAM exiting from self refresh
- * [13:13] Self-Refresh Status
- * 0 = Normal Operation
- * 1 = Self-refresh mode active
- * [15:14] Read/Write Queue Bypass Count
- * 00 = 2
- * 01 = 4
- * 10 = 8
- * 11 = 16
- * [16:16] 128-bit/64-Bit
- * 0 = 64bit Interface to DRAM
- * 1 = 128bit Interface to DRAM
- * [17:17] DIMM ECC Enable
- * 0 = Some DIMMs do not have ECC
- * 1 = ALL DIMMS have ECC bits
- * [18:18] UnBuffered DIMMs
- * 0 = Buffered DIMMS
- * 1 = Unbuffered DIMMS
- * [19:19] Enable 32-Byte Granularity
- * 0 = Optimize for 64byte bursts
- * 1 = Optimize for 32byte bursts
- * [20:20] DIMM 0 is x4
- * [21:21] DIMM 1 is x4
- * [22:22] DIMM 2 is x4
- * [23:23] DIMM 3 is x4
- * 0 = DIMM is not x4
- * 1 = x4 DIMM present
- * [24:24] Disable DRAM Receivers
- * 0 = Receivers enabled
- * 1 = Receivers disabled
- * [27:25] Bypass Max
- * 000 = Arbiters chois is always respected
- * 001 = Oldest entry in DCQ can be bypassed 1 time
- * 010 = Oldest entry in DCQ can be bypassed 2 times
- * 011 = Oldest entry in DCQ can be bypassed 3 times
- * 100 = Oldest entry in DCQ can be bypassed 4 times
- * 101 = Oldest entry in DCQ can be bypassed 5 times
- * 110 = Oldest entry in DCQ can be bypassed 6 times
- * 111 = Oldest entry in DCQ can be bypassed 7 times
- * [31:28] Reserved
- */
- PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
- (4 << 25)|(0 << 24)|
- (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
- (1 << 19)|(1 << 18)|(0 << 17)|(0 << 16)|
- (2 << 14)|(0 << 13)|(0 << 12)|
- (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
- (0 << 3) |(0 << 1) |(0 << 0),
- /* DRAM Config High Register
- * F2:0x94
- * [ 0: 3] Maximum Asynchronous Latency
- * 0000 = 0 ns
- * ...
- * 1111 = 15 ns
- * [ 7: 4] Reserved
- * [11: 8] Read Preamble
- * 0000 = 2.0 ns
- * 0001 = 2.5 ns
- * 0010 = 3.0 ns
- * 0011 = 3.5 ns
- * 0100 = 4.0 ns
- * 0101 = 4.5 ns
- * 0110 = 5.0 ns
- * 0111 = 5.5 ns
- * 1000 = 6.0 ns
- * 1001 = 6.5 ns
- * 1010 = 7.0 ns
- * 1011 = 7.5 ns
- * 1100 = 8.0 ns
- * 1101 = 8.5 ns
- * 1110 = 9.0 ns
- * 1111 = 9.5 ns
- * [15:12] Reserved
- * [18:16] Idle Cycle Limit
- * 000 = 0 cycles
- * 001 = 4 cycles
- * 010 = 8 cycles
- * 011 = 16 cycles
- * 100 = 32 cycles
- * 101 = 64 cycles
- * 110 = 128 cycles
- * 111 = 256 cycles
- * [19:19] Dynamic Idle Cycle Center Enable
- * 0 = Use Idle Cycle Limit
- * 1 = Generate a dynamic Idle cycle limit
- * [22:20] DRAM MEMCLK Frequency
- * 000 = 100Mhz
- * 001 = reserved
- * 010 = 133Mhz
- * 011 = reserved
- * 100 = reserved
- * 101 = 166Mhz
- * 110 = reserved
- * 111 = reserved
- * [24:23] Reserved
- * [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk)
- * 0 = Disable MemClks
- * 1 = Enable MemClks
- * [26:26] Memory Clock 0 Enable
- * 0 = Disabled
- * 1 = Enabled
- * [27:27] Memory Clock 1 Enable
- * 0 = Disabled
- * 1 = Enabled
- * [28:28] Memory Clock 2 Enable
- * 0 = Disabled
- * 1 = Enabled
- * [29:29] Memory Clock 3 Enable
- * 0 = Disabled
- * 1 = Enabled
- * [31:30] Reserved
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a05,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a06,
-#endif
- /* DRAM Delay Line Register
- * F2:0x98
- * Adjust the skew of the input DQS strobe relative to DATA
- * [15: 0] Reserved
- * [23:16] Delay Line Adjust
- * Adjusts the DLL derived PDL delay by one or more delay stages
- * in either the faster or slower direction.
- * [24:24} Adjust Slower
- * 0 = Do Nothing
- * 1 = Adj is used to increase the PDL delay
- * [25:25] Adjust Faster
- * 0 = Do Nothing
- * 1 = Adj is used to decrease the PDL delay
- * [31:26] Reserved
- */
- PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000,
- /* DRAM Scrub Control Register
- * F3:0x58
- * [ 4: 0] DRAM Scrube Rate
- * [ 7: 5] reserved
- * [12: 8] L2 Scrub Rate
- * [15:13] reserved
- * [20:16] Dcache Scrub
- * [31:21] reserved
- * Scrub Rates
- * 00000 = Do not scrub
- * 00001 = 40.00 ns
- * 00010 = 80.00 ns
- * 00011 = 160.00 ns
- * 00100 = 320.00 ns
- * 00101 = 640.00 ns
- * 00110 = 1.28 us
- * 00111 = 2.56 us
- * 01000 = 5.12 us
- * 01001 = 10.20 us
- * 01011 = 41.00 us
- * 01100 = 81.90 us
- * 01101 = 163.80 us
- * 01110 = 327.70 us
- * 01111 = 655.40 us
- * 10000 = 1.31 ms
- * 10001 = 2.62 ms
- * 10010 = 5.24 ms
- * 10011 = 10.49 ms
- * 10100 = 20.97 ms
- * 10101 = 42.00 ms
- * 10110 = 84.00 ms
- * All Others = Reserved
- */
- PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000,
- /* DRAM Scrub Address Low Register
- * F3:0x5C
- * [ 0: 0] DRAM Scrubber Redirect Enable
- * 0 = Do nothing
- * 1 = Scrubber Corrects errors found in normal operation
- * [ 5: 1] Reserved
- * [31: 6] DRAM Scrub Address 31-6
- */
- PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000,
- /* DRAM Scrub Address High Register
- * F3:0x60
- * [ 7: 0] DRAM Scrubb Address 39-32
- * [31: 8] Reserved
- */
- PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000,
- };
- int i;
- int max;
- print_debug("setting up CPU0 northbridge registers\r\n");
- max = sizeof(register_values)/sizeof(register_values[0]);
- for(i = 0; i < max; i += 3) {
- unsigned long reg;
-#if 0
- print_debug_hex32(register_values[i]);
- print_debug(" <-");
- print_debug_hex32(register_values[i+2]);
- print_debug("\r\n");
-#endif
- reg = pci_read_config32(register_values[i]);
- reg &= register_values[i+1];
- reg |= register_values[i+2];
- pci_write_config32(register_values[i], reg);
- }
- print_debug("done.\r\n");
-}
-
-#define DRAM_CONFIG_LOW 0x90
-#define DCL_DLL_Disable (1<<0)
-#define DCL_D_DRV (1<<1)
-#define DCL_QFC_EN (1<<2)
-#define DCL_DisDqsHys (1<<3)
-#define DCL_DramInit (1<<8)
-#define DCL_DramEnable (1<<10)
-#define DCL_MemClrStatus (1<<11)
-#define DCL_DimmEcEn (1<<17)
-
-#define NODE_ID 0x60
-#define HT_INIT_CONTROL 0x6c
-
-#define HTIC_ColdR_Detect (1<<4)
-#define HTIC_BIOSR_Detect (1<<5)
-#define HTIC_INIT_Detect (1<<6)
-
-static void sdram_set_spd_registers(void)
-{
- unsigned long dcl;
- dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
- /* Until I know what is going on disable ECC support */
- dcl &= ~DCL_DimmEcEn;
- pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
-}
-
-#define TIMEOUT_LOOPS 300000
-static void sdram_enable(void)
-{
- unsigned long dcl;
-
- /* Toggle DisDqsHys to get it working */
- dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
- print_debug("dcl: ");
- print_debug_hex32(dcl);
- print_debug("\r\n");
- dcl |= DCL_DisDqsHys;
- pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
- dcl &= ~DCL_DisDqsHys;
- dcl &= ~DCL_DLL_Disable;
- dcl &= ~DCL_D_DRV;
- dcl &= ~DCL_QFC_EN;
- dcl |= DCL_DramInit;
- pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl);
-
- print_debug("Initializing memory: ");
- int loops = 0;
- do {
- dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
- loops += 1;
- if ((loops & 1023) == 0) {
- print_debug(".");
- }
- } while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS));
- if (loops >= TIMEOUT_LOOPS) {
- print_debug(" failed\r\n");
- } else {
- print_debug(" done\r\n");
- }
-
-#if 0
- print_debug("Clearing memory: ");
- loops = 0;
- do {
- dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW));
- loops += 1;
- if ((loops & 1023) == 0) {
- print_debug(" ");
- print_debug_hex32(loops);
- }
- } while(((dcl & DCL_MemClrStatus) == 0) && (loops < TIMEOUT_LOOPS));
- if (loops >= TIMEOUT_LOOPS) {
- print_debug("failed\r\n");
- } else {
- print_debug("done\r\n");
- }
-#endif
-}
-
-static void sdram_first_normal_reference(void) {}
-static void sdram_enable_refresh(void) {}
-static void sdram_special_finishup(void) {}
-
+#include "northbridge/amd/amdk8/early_ht.c"
+#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
+#include "northbridge/amd/amdk8/raminit.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
static int boot_cpu(void)
@@ -853,641 +56,6 @@ static int cpu_init_detected(void)
return cpu_init;
}
-static void setup_coherent_ht_domain(void)
-{
- static const unsigned int register_values[] = {
- /* Routing Table Node i
- * F0:0x40 i = 0,
- * F0:0x44 i = 1,
- * F0:0x48 i = 2,
- * F0:0x4c i = 3,
- * F0:0x50 i = 4,
- * F0:0x54 i = 5,
- * F0:0x58 i = 6,
- * F0:0x5c i = 7
- * [ 0: 3] Request Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [11: 8] Response Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [19:16] Broadcast route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- */
- PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101,
-
- /* Hypetransport Transaction Control Register
- * F0:0x68
- * [ 0: 0] Disable read byte probe
- * 0 = Probes issues
- * 1 = Probes not issued
- * [ 1: 1] Disable Read Doubleword probe
- * 0 = Probes issued
- * 1 = Probes not issued
- * [ 2: 2] Disable write byte probes
- * 0 = Probes issued
- * 1 = Probes not issued
- * [ 3: 3] Disable Write Doubleword Probes
- * 0 = Probes issued
- * 1 = Probes not issued.
- * [ 4: 4] Disable Memroy Controller Target Start
- * 0 = TgtStart packets are generated
- * 1 = TgtStart packets are not generated.
- * [ 5: 5] CPU1 Enable
- * 0 = Second CPU disabled or not present
- * 1 = Second CPU enabled.
- * [ 6: 6] CPU Request PassPW
- * 0 = CPU requests do not pass posted writes
- * 1 = CPU requests pass posted writes.
- * [ 7: 7] CPU read Respons PassPW
- * 0 = CPU Responses do not pass posted writes
- * 1 = CPU responses pass posted writes.
- * [ 8: 8] Disable Probe Memory Cancel
- * 0 = Probes may generate MemCancels
- * 1 = Probes may not generate MemCancels
- * [ 9: 9] Disable Remote Probe Memory Cancel.
- * 0 = Probes hitting dirty blocks generate memory cancel packets
- * 1 = Only probed caches on the same node as the memory controller
- * generate cancel packets.
- * [10:10] Disable Fill Probe
- * 0 = Probes issued for cache fills
- * 1 = Probes not issued for cache fills.
- * [11:11] Response PassPw
- * 0 = Downstream response PassPW based on original request
- * 1 = Downstream response PassPW set to 1
- * [12:12] Change ISOC to Ordered
- * 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization
- * 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering.
- * [14:13] Buffer Release Priority select
- * 00 = 64
- * 01 = 16
- * 10 = 8
- * 11 = 2
- * [15:15] Limit Coherent HT Configuration Space Range
- * 0 = No coherent HT configuration space restrictions
- * 1 = Limit coherent HT configuration space based on node count
- * [16:16] Local Interrupt Conversion Enable.
- * 0 = ExtInt/NMI interrups unaffected.
- * 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1
- * [17:17] APIC Extended Broadcast Enable.
- * 0 = APIC broadcast is 0F
- * 1 = APIC broadcast is FF
- * [18:18] APIC Extended ID Enable
- * 0 = APIC ID is 4 bits.
- * 1 = APIC ID is 8 bits.
- * [19:19] APIC Extended Spurious Vector Enable
- * 0 = Lower 4 bits of spurious vector are read-only 1111
- * 1 = Lower 4 bits of spurious vecotr are writeable.
- * [20:20] Sequence ID Source Node Enable
- * 0 = Normal operation
- * 1 = Keep SeqID on routed packets for debugging.
- * [22:21] Downstream non-posted request limit
- * 00 = No limit
- * 01 = Limited to 1
- * 10 = Limited to 4
- * 11 = Limited to 8
- * [23:23] RESERVED
- * [25:24] Medium-Priority Bypass Count
- * - Maximum # of times a medium priority access can pass a low
- * priority access before Medium-Priority mode is disabled for one access.
- * [27:26] High-Priority Bypass Count
- * - Maximum # of times a high prioirty access can pass a medium or low
- * priority access before High-prioirty mode is disabled for one access.
- * [28:28] Enable High Priority CPU Reads
- * 0 = Cpu reads are medium prioirty
- * 1 = Cpu reads are high prioirty
- * [29:29] Disable Low Priority Writes
- * 0 = Non-isochronous writes are low priority
- * 1 = Non-isochronous writes are medium prioirty
- * [30:30] Disable High Priority Isochronous writes
- * 0 = Isochronous writes are high priority
- * 1 = Isochronous writes are medium priority
- * [31:31] Disable Medium Priority Isochronous writes
- * 0 = Isochronous writes are medium are high
- * 1 = With bit 30 set makes Isochrouns writes low priority.
- */
- PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f,
- /* HT Initialization Control Register
- * F0:0x6C
- * [ 0: 0] Routing Table Disable
- * 0 = Packets are routed according to routing tables
- * 1 = Packets are routed according to the default link field
- * [ 1: 1] Request Disable (BSP should clear this)
- * 0 = Request packets may be generated
- * 1 = Request packets may not be generated.
- * [ 3: 2] Default Link (Read-only)
- * 00 = LDT0
- * 01 = LDT1
- * 10 = LDT2
- * 11 = CPU on same node
- * [ 4: 4] Cold Reset
- * - Scratch bit cleared by a cold reset
- * [ 5: 5] BIOS Reset Detect
- * - Scratch bit cleared by a cold reset
- * [ 6: 6] INIT Detect
- * - Scratch bit cleared by a warm or cold reset not by an INIT
- *
- */
- PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
- /* LDTi Capabilities Registers
- * F0:0x80 i = 0,
- * F0:0xA0 i = 1,
- * F0:0xC0 i = 2,
- */
- /* LDTi Link Control Registrs
- * F0:0x84 i = 0,
- * F0:0xA4 i = 1,
- * F0:0xC4 i = 2,
- * [ 1: 1] CRC Flood Enable
- * 0 = Do not generate sync packets on CRC error
- * 1 = Generate sync packets on CRC error
- * [ 2: 2] CRC Start Test (Read-Only)
- * [ 3: 3] CRC Force Frame Error
- * 0 = Do not generate bad CRC
- * 1 = Generate bad CRC
- * [ 4: 4] Link Failure
- * 0 = No link failure detected
- * 1 = Link failure detected
- * [ 5: 5] Initialization Complete
- * 0 = Initialization not complete
- * 1 = Initialization complete
- * [ 6: 6] Receiver off
- * 0 = Recevier on
- * 1 = Receiver off
- * [ 7: 7] Transmitter Off
- * 0 = Transmitter on
- * 1 = Transmitter off
- * [ 9: 8] CRC_Error
- * 00 = No error
- * [0] = 1 Error on byte lane 0
- * [1] = 1 Error on byte lane 1
- * [12:12] Isochrnous Enable (Read-Only)
- * [13:13] HT Stop Tristate Enable
- * 0 = Driven during an LDTSTOP_L
- * 1 = Tristated during and LDTSTOP_L
- * [14:14] Extended CTL Time
- * 0 = CTL is asserted for 16 bit times during link initialization
- * 1 = CTL is asserted for 50us during link initialization
- * [18:16] Max Link Width In (Read-Only?)
- * 000 = 8 bit link
- * 001 = 16bit link
- * [19:19] Doubleword Flow Control in (Read-Only)
- * 0 = This link does not support doubleword flow control
- * 1 = This link supports doubleword flow control
- * [22:20] Max Link Width Out (Read-Only?)
- * 000 = 8 bit link
- * 001 = 16bit link
- * [23:23] Doubleworld Flow Control out (Read-Only)
- * 0 = This link does not support doubleword flow control
- * 1 = This link supports doubleworkd flow control
- * [26:24] Link Width In
- * 000 = Use 8 bits
- * 001 = Use 16 bits
- * 010 = reserved
- * 011 = Use 32 bits
- * 100 = Use 2 bits
- * 101 = Use 4 bits
- * 110 = reserved
- * 111 = Link physically not connected
- * [27:27] Doubleword Flow Control In Enable
- * 0 = Doubleword flow control disabled
- * 1 = Doubleword flow control enabled (Not currently supported)
- * [30:28] Link Width Out
- * 000 = Use 8 bits
- * 001 = Use 16 bits
- * 010 = reserved
- * 011 = Use 32 bits
- * 100 = Use 2 bits
- * 101 = Use 4 bits
- * 110 = reserved
- * 111 = Link physically not connected
- * [31:31] Doubleworld Flow Control Out Enable
- * 0 = Doubleworld flow control disabled
- * 1 = Doubleword flow control enabled (Not currently supported)
- */
- PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020,
- /* LDTi Frequency/Revision Registers
- * F0:0x88 i = 0,
- * F0:0xA8 i = 1,
- * F0:0xC8 i = 2,
- * [ 4: 0] Minor Revision
- * Contains the HT Minor revision
- * [ 7: 5] Major Revision
- * Contains the HT Major revision
- * [11: 8] Link Frequency (Takes effect the next time the link is reconnected)
- * 0000 = 200Mhz
- * 0001 = reserved
- * 0010 = 400Mhz
- * 0011 = reserved
- * 0100 = 600Mhz
- * 0101 = 800Mhz
- * 0110 = 1000Mhz
- * 0111 = reserved
- * 1000 = reserved
- * 1001 = reserved
- * 1010 = reserved
- * 1011 = reserved
- * 1100 = reserved
- * 1101 = reserved
- * 1110 = reserved
- * 1111 = 100 Mhz
- * [15:12] Error (Not currently Implemented)
- * [31:16] Indicates the frequency capabilities of the link
- * [16] = 1 encoding 0000 of freq supported
- * [17] = 1 encoding 0001 of freq supported
- * [18] = 1 encoding 0010 of freq supported
- * [19] = 1 encoding 0011 of freq supported
- * [20] = 1 encoding 0100 of freq supported
- * [21] = 1 encoding 0101 of freq supported
- * [22] = 1 encoding 0110 of freq supported
- * [23] = 1 encoding 0111 of freq supported
- * [24] = 1 encoding 1000 of freq supported
- * [25] = 1 encoding 1001 of freq supported
- * [26] = 1 encoding 1010 of freq supported
- * [27] = 1 encoding 1011 of freq supported
- * [28] = 1 encoding 1100 of freq supported
- * [29] = 1 encoding 1101 of freq supported
- * [30] = 1 encoding 1110 of freq supported
- * [31] = 1 encoding 1111 of freq supported
- */
- PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200,
- /* LDTi Feature Capability
- * F0:0x8C i = 0,
- * F0:0xAC i = 1,
- * F0:0xCC i = 2,
- */
- /* LDTi Buffer Count Registers
- * F0:0x90 i = 0,
- * F0:0xB0 i = 1,
- * F0:0xD0 i = 2,
- */
- /* LDTi Bus Number Registers
- * F0:0x94 i = 0,
- * F0:0xB4 i = 1,
- * F0:0xD4 i = 2,
- * For NonCoherent HT specifies the bus number downstream (behind the host bridge)
- * [ 0: 7] Primary Bus Number
- * [15: 8] Secondary Bus Number
- * [23:15] Subordiante Bus Number
- * [31:24] reserved
- */
- PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000,
- /* LDTi Type Registers
- * F0:0x98 i = 0,
- * F0:0xB8 i = 1,
- * F0:0xD8 i = 2,
- */
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
-#endif
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
-#endif
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
-#endif
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
- };
- int i;
- int max;
- print_debug("setting up coherent ht domain....\r\n");
- max = sizeof(register_values)/sizeof(register_values[0]);
- for(i = 0; i < max; i += 3) {
- unsigned long reg;
-#if 0
- print_debug_hex32(register_values[i]);
- print_debug(" <-");
- print_debug_hex32(register_values[i+2]);
- print_debug("\r\n");
-#endif
- reg = pci_read_config32(register_values[i]);
- reg &= register_values[i+1];
- reg |= register_values[i+2] & ~register_values[i+1];
- pci_write_config32(register_values[i], reg);
- }
- print_debug("done.\r\n");
-}
-
-static void enumerate_ht_chain(void)
-{
- unsigned next_unitid, last_unitid;;
- next_unitid = 1;
- do {
- uint32_t id;
- uint8_t hdr_type, pos;
- last_unitid = next_unitid;
-
- id = pci_read_config32(PCI_ADDR(0,0,0,PCI_VENDOR_ID));
- /* If the chain is enumerated quit */
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- break;
- }
- hdr_type = pci_read_config8(PCI_ADDR(0,0,0,PCI_HEADER_TYPE));
- pos = 0;
- hdr_type &= 0x7f;
-
- if ((hdr_type == PCI_HEADER_TYPE_NORMAL) ||
- (hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
- pos = pci_read_config8(PCI_ADDR(0,0,0, PCI_CAPABILITY_LIST));
- }
- while(pos != 0) {
- uint8_t cap;
- cap = pci_read_config8(PCI_ADDR(0,0,0, pos + PCI_CAP_LIST_ID));
- if (cap == PCI_CAP_ID_HT) {
- uint16_t flags;
- flags = pci_read_config16(PCI_ADDR(0,0,0, pos + PCI_CAP_FLAGS));
- if ((flags >> 13) == 0) {
- unsigned count;
- flags &= ~0x1f;
- flags |= next_unitid & 0x1f;
- count = (flags >> 5) & 0x1f;
- pci_write_config16(PCI_ADDR(0, 0, 0, pos + PCI_CAP_FLAGS), flags);
- next_unitid += count;
- break;
- }
- }
- pos = pci_read_config8(PCI_ADDR(0, 0, 0, pos + PCI_CAP_LIST_NEXT));
- }
- } while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
-}
static void print_pci_devices(void)
{
@@ -1510,123 +78,6 @@ static void print_pci_devices(void)
}
}
-#define PCI_ID(VENDOR_ID, DEVICE_ID) ((DEVICE_ID << 16) | (VENDOR_ID))
-#define SMBUS_IO_BASE 0x1000
-
-#define SMBGSTATUS 0xe0
-#define SMBGCTL 0xe2
-#define SMBHSTADDR 0xe4
-#define SMBHSTDAT 0xe6
-#define SMBHSTCMD 0xe8
-#define SMBHSTFIFO 0xe9
-
-#define SMBUS_TIMEOUT (100*1000*10)
-
-static void enable_smbus(void)
-{
- uint32_t addr;
- for(addr = PCI_ADDR(0, 0, 0, 0);
- addr <= PCI_ADDR(0, 0x1f, 0x7, 0);
- addr += PCI_ADDR(0,0,1,0)) {
- uint32_t id;
- id = pci_read_config32(addr);
- if (id == PCI_ID(0x1022, 0x746b)) {
- break;
- }
- }
- if (addr > PCI_ADDR(0, 0x1f, 0x7, 0)) {
- die("SMBUS controller not found\r\n");
- }
- uint8_t enable;
- print_debug("SMBus controller enabled\r\n");
- pci_write_config32(addr + 0x58, SMBUS_IO_BASE | 1);
- enable = pci_read_config8(addr + 0x41);
- pci_write_config8(addr + 0x41, enable | (1 << 7));
-}
-
-
-static inline void smbus_delay(void)
-{
- outb(0x80, 0x80);
-}
-
-static int smbus_wait_until_ready(void)
-{
- unsigned long loops;
- loops = SMBUS_TIMEOUT;
- do {
- unsigned short val;
- smbus_delay();
- val = inw(SMBUS_IO_BASE + SMBGSTATUS);
- if ((val & 0x800) == 0) {
- break;
- }
- } while(--loops);
- return loops?0:-1;
-}
-
-static int smbus_wait_until_done(void)
-{
- unsigned long loops;
- loops = SMBUS_TIMEOUT;
- do {
- unsigned short val;
- smbus_delay();
-
- val = inw(SMBUS_IO_BASE + SMBGSTATUS);
- if (((val & 0x8) == 0) || ((val & 0x437) != 0)) {
- break;
- }
- } while(--loops);
- return loops?0:-1;
-}
-
-static int smbus_read_byte(unsigned device, unsigned address)
-{
- unsigned char global_control_register;
- unsigned char global_status_register;
- unsigned char byte;
-
- if (smbus_wait_until_ready() < 0) {
- return -1;
- }
-
- /* setup transaction */
- /* disable interrupts */
- outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), SMBUS_IO_BASE + SMBGCTL);
- /* set the device I'm talking too */
- outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR);
- /* set the command/address... */
- outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
- /* set up for a byte data read */
- outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x2), SMBUS_IO_BASE + SMBGCTL);
-
- /* clear any lingering errors, so the transaction will run */
- /* Do I need to write the bits to a 1 to clear an error? */
- outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS);
-
- /* clear the data word...*/
- outw(0, SMBUS_IO_BASE + SMBHSTDAT);
-
- /* start the command */
- outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL);
-
-
- /* poll for transaction completion */
- if (smbus_wait_until_done() < 0) {
- return -1;
- }
-
- global_status_register = inw(SMBUS_IO_BASE + SMBGSTATUS);
-
- /* read results of transaction */
- byte = inw(SMBUS_IO_BASE + SMBHSTDAT) & 0xff;
-
- if (global_status_register != (1 << 4)) {
- return -1;
- }
- return byte;
-}
static void dump_spd_registers(void)
{
@@ -1648,7 +99,7 @@ static void dump_spd_registers(void)
status = smbus_read_byte(device, i);
if (status < 0) {
print_debug("bad device\r\n");
- continue;
+ break;
}
byte = status & 0xff;
print_debug_hex8(byte);
@@ -1659,55 +110,83 @@ static void dump_spd_registers(void)
}
}
-static void dump_spd_registers1(void)
+
+static void pnp_write_config(unsigned char port, unsigned char value, unsigned char reg)
{
- int i;
- print_debug("dimm: ");
- print_debug_hex8(SMBUS_MEM_DEVICE_START);
- for(i = 0; i < 256; i++) {
- int status;
- unsigned char byte;
- if ((i & 0xf) == 0) {
- print_debug("\r\n");
- print_debug_hex8(i);
- print_debug(": ");
- }
- status = smbus_read_byte(SMBUS_MEM_DEVICE_START, i);
- if (status < 0) {
- print_debug("bad device\r\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\r\n");
+ outb(reg, port);
+ outb(value, port +1);
}
+static unsigned char pnp_read_config(unsigned char port, unsigned char reg)
+{
+ outb(reg, port);
+ return inb(port +1);
+}
+static void pnp_set_logical_device(unsigned char port, int device)
+{
+ pnp_write_config(port, device, 0x07);
+}
-static void dump_spd_registers2(void)
+static void pnp_set_enable(unsigned char port, int enable)
{
- unsigned dev;
- print_debug("\r\n");
- for(dev = SMBUS_MEM_DEVICE_START; dev <= SMBUS_MEM_DEVICE_END; dev += SMBUS_MEM_DEVICE_INC) {
- print_debug("dimm: ");
- print_debug_hex8(dev);
- int status;
- unsigned char byte;
- status = smbus_read_byte(dev, 0);
- if (status < 0) {
- print_debug("bad device\r\n");
- continue;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug("\r\n");
- }
+ pnp_write_config(port, enable?0x1:0x0, 0x30);
+}
+
+static int pnp_read_enable(unsigned char port)
+{
+ return !!pnp_read_config(port, 0x30);
+}
+
+static void pnp_set_iobase0(unsigned char port, unsigned iobase)
+{
+ pnp_write_config(port, (iobase >> 8) & 0xff, 0x60);
+ pnp_write_config(port, iobase & 0xff, 0x61);
+}
+
+static void pnp_set_iobase1(unsigned char port, unsigned iobase)
+{
+ pnp_write_config(port, (iobase >> 8) & 0xff, 0x62);
+ pnp_write_config(port, iobase & 0xff, 0x63);
+}
+
+static void pnp_set_irq0(unsigned char port, unsigned irq)
+{
+ pnp_write_config(port, irq, 0x70);
+}
+
+static void pnp_set_irq1(unsigned char port, unsigned irq)
+{
+ pnp_write_config(port, irq, 0x72);
+}
+
+static void pnp_set_drq(unsigned char port, unsigned drq)
+{
+ pnp_write_config(port, drq & 0xff, 0x74);
+}
+
+#define PC87360_FDC 0x00
+#define PC87360_PP 0x01
+#define PC87360_SP2 0x02
+#define PC87360_SP1 0x03
+#define PC87360_SWC 0x04
+#define PC87360_KBCM 0x05
+#define PC87360_KBCK 0x06
+#define PC87360_GPIO 0x07
+#define PC87360_ACB 0x08
+#define PC87360_FSCM 0x09
+#define PC87360_WDT 0x0A
+
+static void pc87360_enable_serial(void)
+{
+ pnp_set_logical_device(SIO_BASE, PC87360_SP1);
+ pnp_set_enable(SIO_BASE, 1);
+ pnp_set_iobase0(SIO_BASE, 0x3f8);
}
static void main(void)
{
+ pc87360_enable_serial();
uart_init();
console_init();
if (boot_cpu() && !cpu_init_detected()) {
@@ -1716,11 +195,8 @@ static void main(void)
print_pci_devices();
enable_smbus();
sdram_initialize();
-#if 0
+
dump_spd_registers();
-#endif
- dump_spd_registers1();
- dump_spd_registers2();
#if 0
ram_fill( 0x00100000, 0x00180000);
ram_verify(0x00100000, 0x00180000);
diff --git a/src/mainboard/amd/solo/failover.c b/src/mainboard/amd/solo/failover.c
new file mode 100644
index 0000000000..cda8ea8076
--- /dev/null
+++ b/src/mainboard/amd/solo/failover.c
@@ -0,0 +1,26 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include "arch/romcc_io.h"
+#include "pc80/mc146818rtc_early.c"
+#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+
+
+
+static void main(void)
+{
+ if (do_normal_boot()) {
+ /* Nothing special needs to be done to find bus 0 */
+
+ /* Allow the HT devices to be found */
+ enumerate_ht_chain();
+
+ /* Setup the 8111 */
+ amd8111_enable_rom();
+
+ /* Jump to the normal image */
+ asm("jmp __normal_image");
+ }
+}