issue 41 - fix up motherboard compilation. There's always hope.

1201_ht_bus0_dev0_fidvid_mb.diff part 1



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2120 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 23 insertions, 10 deletions

diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb
index 646293e20e..d6db7c1c74 100644
--- a/src/mainboard/tyan/s2850/Options.lb
+++ b/src/mainboard/tyan/s2850/Options.lb
@@ -52,7 +52,7 @@ uses OBJCOPY
 uses CONFIG_CHIP_NAME
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_PCI_ROM_RUN
-uses K8_E0_MEM_HOLE_SIZEK
+uses K8_HW_MEM_HOLE_SIZEK
 
 uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
@@ -71,7 +71,9 @@ default ROM_SIZE=524288
 ##
 ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
 ##
-default FALLBACK_SIZE=131072
+#default FALLBACK_SIZE=131072
+#256K
+default FALLBACK_SIZE=0x40000
 
 ##
 ## Build code for the fallback boot
@@ -120,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1
 default CONFIG_CHIP_NAME=1
 
 #1G memory hole
-default K8_E0_MEM_HOLE_SIZEK=0x100000
+default K8_HW_MEM_HOLE_SIZEK=0x100000
 
 #VGA Console
 default CONFIG_CONSOLE_VGA=1
diff --git a/src/mainboard/tyan/s2850/auto.c b/src/mainboard/tyan/s2850/auto.c
index 0b9012aca8..e0d85dbd56 100644
--- a/src/mainboard/tyan/s2850/auto.c
+++ b/src/mainboard/tyan/s2850/auto.c
@@ -19,7 +19,7 @@
 #include "cpu/x86/lapic/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "northbridge/amd/amdk8/debug.c"
-#include "northbridge/amd/amdk8/cpu_rev.c"
+#include <cpu/amd/model_fxx_rev.h>
 #include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 #include "cpu/amd/mtrr/amd_earlymtrr.c"
 #include "cpu/x86/bist.h"
diff --git a/src/mainboard/tyan/s2850/cache_as_ram_auto.c b/src/mainboard/tyan/s2850/cache_as_ram_auto.c
index b7a39047f2..38aba17835 100644
--- a/src/mainboard/tyan/s2850/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2850/cache_as_ram_auto.c
@@ -13,7 +13,18 @@
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
-#include "northbridge/amd/amdk8/cpu_rev.c"
+#if 0
+static void post_code(uint8_t value) {
+#if 1
+        int i;
+        for(i=0;i<0x80000;i++) {
+                outb(value, 0x80);
+        }
+#endif
+}
+#endif
+
+#include <cpu/amd/model_fxx_rev.h>
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
@@ -134,9 +145,11 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
 
         enumerate_ht_chain();
 
+        /* Setup the ck804 */
         amd8111_enable_rom();
 
         /* Is this a deliberate reset by the bios */
+//        post_code(0x22);
         if (bios_reset_detected() && last_boot_normal_x) {
                 goto normal_image;
         }
@@ -148,12 +161,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
                 goto fallback_image;
         }
  normal_image:
+//        post_code(0x23);
         __asm__ volatile ("jmp __normal_image"
                 : /* outputs */
                 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
                 );
 
  fallback_image:
+//        post_code(0x25);
 	;
 }
 #endif
@@ -191,6 +206,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 		init_cpus(cpu_init_detectedx);
         }
 
+//	post_code(0x32);
 	
  	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
         uart_init();
@@ -200,10 +216,6 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	report_bist_failure(bist);
 
         setup_default_resource_map();
-#if 0
-        dump_pci_device(PCI_DEV(0, 0x18, 0));
-	dump_pci_device(PCI_DEV(0, 0x19, 0));
-#endif
 
 	needs_reset = setup_coherent_ht_domain();
 	
@@ -211,7 +223,6 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
         // It is said that we should start core1 after all core0 launched
         start_other_cores();
 #endif
-        // automatically set that for you, but you might meet tight space
         needs_reset |= ht_setup_chains_x();
 
        	if (needs_reset) {