pcengines/apu2: add board support

Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
author: Piotr Król <piotr.krol@3mdeb.com> 2016-05-27 12:04:13 +0200
committer: Kyösti Mälkki <kyosti.malkki@gmail.com> 2016-12-19 10:11:13 +0100
commit: dcd2f17ff47cc1a4b26f253fb11a991cfe4ff6f5 (patch)
tree: 8ca75267ff1c0fa136680bbe7a87dd8b58e697ee /src/mainboard/pcengines
parent: cff3b095c2fdb7af7b6fb0a1e09c2a66c1ad1c67 (diff)
25 files changed, 2510 insertions, 0 deletions
diff --git a/src/mainboard/pcengines/apu2/BiosCallOuts.c b/src/mainboard/pcengines/apu2/BiosCallOuts.c
new file mode 100644
index 0000000000..bba814412a
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/BiosCallOuts.c
@@ -0,0 +1,157 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include <spd_cache.h>
+#include <northbridge/amd/pi/BiosCallOuts.h>
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
+#include "hudson.h"
+#include <stdlib.h>
+
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr);
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+	{AGESA_ALLOCATE_BUFFER,          agesa_AllocateBuffer },
+	{AGESA_DEALLOCATE_BUFFER,        agesa_DeallocateBuffer },
+	{AGESA_LOCATE_BUFFER,            agesa_LocateBuffer },
+	{AGESA_READ_SPD,                 board_ReadSpd_from_cbfs },
+	{AGESA_DO_RESET,                 agesa_Reset },
+	{AGESA_READ_SPD_RECOVERY,        agesa_NoopUnsupported },
+	{AGESA_RUNFUNC_ONAP,             agesa_RunFuncOnAp },
+	{AGESA_GET_IDS_INIT_DATA,        agesa_EmptyIdsInitData },
+	{AGESA_HOOKBEFORE_DQS_TRAINING,  agesa_NoopSuccess },
+	{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+	{AGESA_FCH_OEM_CALLOUT,          Fch_Oem_config }
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+//{AGESA_GNB_GFX_GET_VBIOS_IMAGE,  agesa_NoopUnsupported }
+
+
+/*
+ * Hardware Monitor Fan Control
+ * Hardware limitation:
+ *  HWM will fail to read the input temperature via I2C if other
+ *  software switches the I2C address.  AMD recommends using IMC
+ *  to control fans, instead of HWM.
+ */
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+	FchParams->Imc.ImcEnable = FALSE;
+	FchParams->Hwm.HwMonitorEnable = FALSE;
+	FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;                /* 1 enable, 0 disable TSI Auto Polling */
+}
+
+/**
+ * Fch Oem setting callback
+ *
+ *  Configure platform specific Hudson device,
+ *   such Azalia, SATA, IMC etc.
+ */
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+	AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr;
+	if (StdHeader->Func == AMD_INIT_RESET) {
+		FCH_RESET_DATA_BLOCK *FchParams =  (FCH_RESET_DATA_BLOCK *) FchData;
+		printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
+		//FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
+		FchParams->LegacyFree = CONFIG_HUDSON_LEGACY_FREE;
+		FchParams->FchReset.SataEnable = hudson_sata_enable();
+		FchParams->FchReset.IdeEnable = hudson_ide_enable();
+		FchParams->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+		FchParams->FchReset.Xhci1Enable = FALSE;
+	} else if (StdHeader->Func == AMD_INIT_ENV) {
+		FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData;
+		printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
+
+		FchParams->Azalia.AzaliaEnable = AzDisable;
+
+		/* Fan Control */
+		oem_fan_control(FchParams);
+
+		/* XHCI configuration */
+		FchParams->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+		FchParams->Usb.Xhci1Enable = FALSE;
+
+		/* EHCI configuration */
+		FchParams->Usb.Ehci3Enable = !IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+		FchParams->Usb.Ehci1Enable = FALSE;	// Disable EHCI 0 (port 0 to 3)
+		FchParams->Usb.Ehci2Enable = TRUE;	// Enable EHCI 1 ( port 4 to 7) port 4 and 5 to EHCI header port 6 and 7 to PCIe slot.
+
+		/* sata configuration */
+		FchParams->Sata.SataDevSlpPort0 = 0;	// Disable DEVSLP0 and 1 to make sure GPIO55 and 59 are not used by DEVSLP
+		FchParams->Sata.SataDevSlpPort1 = 0;
+
+		FchParams->Sata.SataClass = CONFIG_HUDSON_SATA_MODE;
+		switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) {
+		case SataRaid:
+		case SataAhci:
+		case SataAhci7804:
+		case SataLegacyIde:
+			FchParams->Sata.SataIdeMode = FALSE;
+			break;
+		case SataIde2Ahci:
+		case SataIde2Ahci7804:
+		default: /* SataNativeIde */
+			FchParams->Sata.SataIdeMode = TRUE;
+			break;
+		}
+	}
+	printk(BIOS_DEBUG, "Done\n");
+
+	return AGESA_SUCCESS;
+}
+
+
+static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS Status = AGESA_UNSUPPORTED;
+#ifdef __PRE_RAM__
+	AGESA_READ_SPD_PARAMS	*info = ConfigPtr;
+	int index = 0;
+
+	if (info->MemChannelId > 0)
+		return AGESA_UNSUPPORTED;
+	if (info->SocketId != 0)
+		return AGESA_UNSUPPORTED;
+	if (info->DimmId != 0)
+		return AGESA_UNSUPPORTED;
+
+	/* One SPD file contains all 4 options, determine which index to read here, then call into the standard routines*/
+
+	u8 *gpio_bank0_ptr = (u8 *)(ACPI_MMIO_BASE + GPIO_BANK0_BASE);
+	if (*(gpio_bank0_ptr + (0x40 << 2) + 2) & BIT0) index |= BIT0;
+	if (*(gpio_bank0_ptr + (0x41 << 2) + 2) & BIT0) index |= BIT1;
+
+	printk(BIOS_INFO, "Reading SPD index %d\n", index);
+
+	if (read_spd_from_cbfs((u8*)info->Buffer, index) < 0)
+		die("No SPD data\n");
+
+	Status = AGESA_SUCCESS;
+#endif
+	return Status;
+}
diff --git a/src/mainboard/pcengines/apu2/HYNIX-2G-1333.spd.hex b/src/mainboard/pcengines/apu2/HYNIX-2G-1333.spd.hex
new file mode 100644
index 0000000000..a70db53eda
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/HYNIX-2G-1333.spd.hex
@@ -0,0 +1,264 @@
+# PCEngines 2Gb 1333
+
+# SPD contents for APU 2GB DDR3 NO ECC (1333MHz PC1333) soldered down
+#  0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+#    bits[3:0]: 1 = 128 SPD Bytes Used
+#    bits[6:4]: 1 = 256 SPD Bytes Total
+#    bit7 : 0 = CRC covers bytes 0 ~ 128
+01
+
+#	1 SPD Revision
+#    0x13 = Revision 1.3
+13
+
+#	2 Key Byte / DRAM Device Type
+#		bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+#  3 Key Byte / Module Type
+#    bits[3:0]: 3 = SO-DIMM
+#    bits[3:0]: 8 = 72b-SO-DIMM
+#    bits[7:4]:     reserved
+03
+
+#	4 SDRAM CHIP Density and Banks
+#		bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip
+#		bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip
+#		bits[6:4]: 0 = 3 (8 banks)
+#		bit7 : reserved
+03
+
+#  5 SDRAM Addressing
+#    bits[2:0]: 1 = 10 Column Address Bits
+#    bits[5:3]: 4 = 16 Row Address Bits
+#    bits[5:3]: 3 = 15 Row Address Bits
+#    bits[5:3]: 2 = 14 Row Address Bits
+#    bits[7:6]:     reserved
+19
+
+#	6 Module Nominal Voltage, VDD
+#		bit0 : 0 = 1.5 V operable
+#		bit1 : 0 = NOT 1.35 V operable
+#		bit2 : 0 = NOT 1.25 V operable
+#		bits[7:3]: reserved
+00
+
+#	7 Module Organization
+#    	bits[2:0]: 1 = 8 bits
+#		bits[2:0]: 2 = 16 bits
+#		bits[5:3]: 0 = 1 Rank
+#		bits[7:6]: reserved
+01
+
+#	8 Module Memory Bus Width
+#		bits[2:0]: 3 = Primary bus width is 64 bits
+#		bits[4:3]: 0 = 0 bits (no bus width extension)
+#               bits[4:3]: 1 = 8 bits (for ECC)
+#		bits[7:5]: reserved
+03
+
+#	9 Fine Timebase (FTB) Dividend / Divisor
+#		bits[3:0]: 0x02 divisor
+#		bits[7:4]: 0x05 dividend
+#		5 / 2 = 2.5ps
+52
+
+# 10 Medium Timebase (MTB) Dividend
+# 11 Medium Timebase (MTB) Divisor
+#    1 / 8 = .125 ns
+01 08
+
+#	12 SDRAM Minimum Cycle Time (tCKmin)
+#		0x0a = tCKmin of 1.25 ns = DDR3-1600 (800 MHz clock)
+#		0x0c = tCKmin of 1.5 ns  = DDR3-1333 (667 MHz clock)
+#    0x0c  = tCKmin of 1.5 ns = in multiples of MTB
+0C
+
+#	13 Reserved
+00
+
+#	14 CAS Latencies Supported, Least Significant Byte
+#	15 CAS Latencies Supported, Most Significant Byte
+#		Cas Latencies of 11 - 5 are supported
+7E 00
+
+#	16 Minimum CAS Latency Time (tAAmin)
+#    0x6C = 13.5ns - DDR3-1333
+#    0x69 = 13.125 ns - DDR3-1333
+69
+
+#	17 Minimum Write Recovery Time (tWRmin)
+#		0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+#	18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+#    0x6E = 13.5ns -  DDR3-1333
+#    0x69 = 13.125 ns - DDR3-1333
+69
+
+#	19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+#		0x30 = 6.0ns
+#		0x38 = 7.0ns
+#		0x3C = 7.5ns
+30
+
+# 20 Minimum Row Precharge Delay Time (tRPmin)
+#    0x6C = 13.5ns -  
+#    0x69 = 13.125 ns - DDR3-1333
+69
+
+#	21 Upper Nibbles for tRAS and tRC
+#		bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+#		bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+#	22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+#    0x120 = 36ns - DDR3-1333 (see byte 21)
+#		0x120 = 36ns - DDR3
+20
+
+#	23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+#    0x289 = 49.125ns - DDR3-1333
+89
+
+# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+#   0x500 = 160ns - for 2 Gigabit chips
+#   0x820 = 260ns - for 4 Gigabit chips
+00 05
+
+#	26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+#		0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+#	27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+#		0x3c = 7.5ns - All DDR3 SDRAM speed bins
+3C
+
+#	28 Upper Nibble for tFAWmin
+#	29 Minimum Four Activate Window Delay Time (tFAWmin)
+#    0x00F0 = 30ns -  DDR3-1333, 1 KB page size
+00 F0
+
+#	30 SDRAM Optional Feature
+#		bit0 : 1= RZQ/6 supported
+#		bit1 : 1 = RZQ/7 supported
+#		bits[6:2]: reserved
+#		bit7 : 1 = DLL Off mode supported
+83
+
+#	31 SDRAM Thermal and Refresh Options
+#		bit0 : 1 = Temp up to 95c supported
+#		bit1 : 0 = 85-95c uses 2x refresh rate
+#		bit2 : 1 = Auto Self Refresh supported
+#    bit3     : 0 = no on die thermal sensor
+#		bits[6:4]: reserved
+#    bit7     : 0 = partial self refresh supported
+01
+
+#	32 Module Thermal Sensor
+#		0 = Thermal sensor not incorporated onto this assembly
+00
+
+#	33 SDRAM Device Type
+#		bits[1:0]: 0 = Signal Loading not specified
+#		bits[3:2]: reserved
+#		bits[6:4]: 0 = Die count not specified
+#		bit7 : 0 = Standard Monolithic DRAM Device
+00
+
+#	34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+00
+
+#	35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+00
+
+#	36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+00
+
+#	37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+00
+
+#	38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00
+
+#      39  40 (reserved)
+00 00
+
+# 41 tMAW, MAC
+# 8K*tREFI / 200k
+86
+
+#      42 - 47 (reserved)
+00 00 00 00 00 00 
+
+#	48 - 55 (reserved)
+00 00 00 00 00 00 00 00
+
+#	56 - 59 (reserved)
+00 00 00 00
+
+#	60 Raw Card Extension, Module Nominal Height
+#		bits[4:0]: 0 = <= 15mm tall
+#		bits[7:5]: 0 = raw card revision 0-3
+00
+
+#	61 Module Maximum Thickness
+#		bits[3:0]: 0 = thickness front <= 1mm
+#		bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+#      62 Reference Raw Card Used
+#              bits[4:0]: 0 = Reference Raw card A used
+#              bits[6:5]: 0 = revision 0
+#              bit7 : 0 = Reference raw cards A through AL
+# 			   revision B4 
+61
+
+#	63 Address Mapping from Edge Connector to DRAM
+#		bit0 : 0 = standard mapping (not mirrored)
+#		bits[7:1]: reserved
+00
+
+#	64 - 71 (reserved)
+00 00 00 00 00 00 00 00
+
+#	72 - 79 (reserved)
+00 00 00 00 00 00 00 00
+
+#	80 - 87 (reserved)
+00 00 00 00 00 00 00 00
+
+#	88 - 95 (reserved)
+00 00 00 00 00 00 00 00
+
+#	96 - 103 (reserved)
+00 00 00 00 00 00 00 00
+
+#	104 - 111 (reserved)
+00 00 00 00 00 00 00 00
+
+#	112 - 116 (reserved)
+00 00 00 00 00
+
+#	117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+#           0x0001 = AMD
+00 01
+
+#	119 Module ID: Module Manufacturing Location - OEM specified
+00
+
+#	120 Module ID: Module Manufacture Year in BCD
+#		0x15 = 2015
+15
+
+#	121 Module ID: Module Manufacture week
+#		0x44 = 44th week
+44
+
+#	122 - 125: Module Serial Number
+00 00 00 00
+
+#	126 - 127: Cyclical Redundancy Code
+b6 73
+
diff --git a/src/mainboard/pcengines/apu2/HYNIX-4G-1333-ECC.spd.hex b/src/mainboard/pcengines/apu2/HYNIX-4G-1333-ECC.spd.hex
new file mode 100644
index 0000000000..ac6b4c6c9d
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/HYNIX-4G-1333-ECC.spd.hex
@@ -0,0 +1,261 @@
+# HYNIX-4GBYTE-1333 The H9 N0 SPD delivered by Hynix 
+
+# SPD contents for APU 4GB DDR3 ECC (1333MHz PC1333) soldered down
+#  0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+#    bits[3:0]: 1 = 128 SPD Bytes Used
+#    bits[6:4]: 1 = 256 SPD Bytes Total
+#    bit7 : 0 = CRC covers bytes 0 ~ 128
+01
+
+#  1 SPD Revision -
+#    0x13 = Revision 1.3
+13
+#  2 Key Byte / DRAM Device Type
+#    bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+#  3 Key Byte / Module Type
+#    bits[3:0]: 3 = SO-DIMM
+#    bits[3:0]: 8 = 72b-SO-DIMM
+#    bits[7:4]:     reserved
+08
+
+#  4 SDRAM CHIP Density and Banks
+#    bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip
+#    bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip
+#    bits[6:4]: 0 = 3 (8 banks)
+#    bit7     :     reserved
+04
+
+#  5 SDRAM Addressing
+#    bits[2:0]: 1 = 10 Column Address Bits
+#    bits[5:3]: 4 = 16 Row Address Bits
+#    bits[5:3]: 3 = 15 Row Address Bits
+#    bits[5:3]: 2 = 14 Row Address Bits
+#    bits[7:6]:     reserved
+21
+
+#  6 Module Nominal Voltage, VDD
+#    bit0     : 0 = 1.5 V operable
+#    bit1     : 0 = NOT 1.35 V operable
+#    bit2     : 0 = NOT 1.25 V operable
+#    bits[7:3]:     reserved
+00
+
+#  7 Module Organization
+#    bits[2:0]: 1 = 8 bits
+#    bits[2:0]: 2 = 16 bits
+#    bits[5:3]: 0 = 1 Rank
+#    bits[7:6]:     reserved
+01
+
+#  8 Module Memory Bus Width
+#    bits[2:0]: 3 = Primary bus width is 64 bits
+#    bits[4:3]: 0 = 0 bits (no bus width extension)
+#    bits[4:3]: 1 = 8 bits (for ECC)
+#    bits[7:5]:     reserved
+0B
+
+#  9 Fine Timebase (FTB) Dividend / Divisor
+#		bits[3:0]: 0x02 divisor
+#		bits[7:4]: 0x05 dividend
+#               5 / 2 = 2.5 ps
+52
+
+# 10 Medium Timebase (MTB) Dividend
+# 11 Medium Timebase (MTB) Divisor
+#    1 / 8 = .125 ns
+01 08
+
+# 12 SDRAM Minimum Cycle Time (tCKmin)
+#		0x0a = tCKmin of 1.25 ns = DDR3-1600 (800 MHz clock)
+#		0x0c = tCKmin of 1.5 ns  = DDR3-1333 (667 MHz clock)
+#    0x0c  = tCKmin of 1.5 ns = in multiples of MTB
+0C
+
+# 13 Reserved
+00
+
+# 14 CAS Latencies Supported, Least Significant Byte
+# 15 CAS Latencies Supported, Most Significant Byte
+#    Cas Latencies of 11 - 5 are supported
+7E 00
+
+# 16 Minimum CAS Latency Time (tAAmin)
+#    0x6C = 13.5ns - DDR3-1333
+#    0x69 = 13.125 ns - DDR3-1333
+69
+
+# 17 Minimum Write Recovery Time (tWRmin)
+#    0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+# 18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+#    0x6E = 13.5ns -  DDR3-1333
+#    0x69 = 13.125 ns - DDR3-1333
+69
+
+# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+#   0x30 = 6ns
+#   0x38 = 7.0ns
+#   0x3C = 7.5ns
+30
+
+# 20 Minimum Row Precharge Delay Time (tRPmin)
+#    0x6C = 13.5ns -  
+#    0x69 = 13.125 ns - DDR3-1333
+69
+
+# 21 Upper Nibbles for tRAS and tRC
+#    bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+#    bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+#    0x120 = 36ns - DDR3-1333 (see byte 21)
+#		0x120 = 36ns - DDR3
+20
+
+# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+#    0x28C = 49.5ns - DDR3-1333
+#    0x289 = 49.125ns - DDR3-1333
+89
+
+# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+#    0x500 = 160ns - for 2 Gigabit chips
+#    0x820 = 260ns - for 4 Gigabit chips
+20 08
+
+# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+#    0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+#    0x3c =  7.5ns -  All DDR3 SDRAM speed bins
+3C
+
+# 28 Upper Nibble for tFAWmin
+# 29 Minimum Four Activate Window Delay Time (tFAWmin)
+#    0x00F0 = 30ns -  DDR3-1333, 1 KB page size
+00 F0
+
+# 30 SDRAM Optional Feature
+#    bit0     : 1= RZQ/6 supported
+#    bit1     : 1 = RZQ/7 supported
+#    bits[6:2]:     reserved
+#    bit7     : 1 = DLL Off mode supported
+83
+
+# 31 SDRAM Thermal and Refresh Options
+#    bit0     : 1 = Temp up to 95c supported
+#    bit1     : 0 = 85-95c uses 2x refresh rate
+#    bit2     : 1 = Auto Self Refresh supported
+#    bit3     : 0 = no on die thermal sensor
+#    bits[6:4]:     reserved
+#    bit7     : 0 = partial self refresh supported
+01
+
+# 32 Module Thermal Sensor
+#    0 = Thermal sensor not incorporated onto this assembly
+00
+
+# 33 SDRAM Device Type
+#    bits[1:0]: 0 = Signal Loading not specified
+#    bits[3:2]:     reserved
+#    bits[6:4]: 0 = Die count not specified
+#    bit7     : 0 = Standard Monolithic DRAM Device
+00
+
+# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+00
+# 35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+00
+# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+00
+# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+00
+# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00
+
+#      39  40 (reserved)
+00 00
+
+# 41 tMAW, MAC
+# 8K*tREFI / 200k
+86
+
+#      42 - 47 (reserved)
+00 00 00 00 00 00 
+
+#      48 - 55 (reserved)
+00 00 00 00 00 00 00 00
+
+#      56 - 59 (reserved)
+00 00 00 00
+
+#      60 Raw Card Extension, Module Nominal Height
+#              bits[4:0]: 0 = <= 15mm tall
+#              bits[7:5]: 0 = raw card revision 0-3
+00
+
+#      61 Module Maximum Thickness
+#              bits[3:0]: 0 = thickness front <= 1mm
+#              bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+#      62 Reference Raw Card Used
+#              bits[4:0]: 0 = Reference Raw card A used
+#              bits[6:5]: 0 = revision 0
+#              bit7 : 0 = Reference raw cards A through AL
+# 			   revision B4 
+61
+
+#      63 Address Mapping from Edge Connector to DRAM
+#              bit0 : 0 = standard mapping (not mirrored)
+#              bits[7:1]: reserved
+00
+
+#      64 - 71 (reserved)
+00 00 00 00 00 00 00 00
+
+#      72 - 79 (reserved)
+00 00 00 00 00 00 00 00
+
+#      80 - 87 (reserved)
+00 00 00 00 00 00 00 00
+
+#      88 - 95 (reserved)
+00 00 00 00 00 00 00 00
+
+#      96 - 103 (reserved)
+00 00 00 00 00 00 00 00
+
+#      104 - 111 (reserved)
+00 00 00 00 00 00 00 00
+
+#      112 - 116 (reserved)
+00 00 00 00 00
+
+# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+#           0x0001 = AMD
+00 01
+
+# 119 Module ID: Module Manufacturing Location - oem specified
+00
+
+# 120 Module ID: Module Manufacture Year in BCD
+#     0x15 = 2015
+# 121 Module ID: Module Manufacture week
+#     0x44 = 44th week
+15 44
+
+#      122 - 125: Module Serial Number
+00 00 00 00
+
+#      126 - 127: Cyclical Redundancy Code
+67 94
+
+
+
+
diff --git a/src/mainboard/pcengines/apu2/Kconfig b/src/mainboard/pcengines/apu2/Kconfig
new file mode 100644
index 0000000000..f09a220966
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/Kconfig
@@ -0,0 +1,91 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# Copyright (C) 2015 Kyösti Mälkki <kyosti.malkki@gmail.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+
+if BOARD_PCENGINES_APU2
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select CPU_AMD_PI_00730F01
+	select NORTHBRIDGE_AMD_PI_00730F01
+	select SOUTHBRIDGE_AMD_PI_AVALON
+	select SUPERIO_NUVOTON_NCT5104D
+	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
+	select HAVE_ACPI_TABLES
+	select BOARD_ROMSIZE_KB_8192
+	select SPD_CACHE
+	select HUDSON_DISABLE_IMC
+	select USE_BLOBS
+
+config MAINBOARD_DIR
+	string
+	default pcengines/apu2
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "PCEngines apu2"
+
+config MAX_CPUS
+	int
+	default 4
+
+config IRQ_SLOT_COUNT
+	int
+	default 11
+
+config ONBOARD_VGA_IS_PRIMARY
+	bool
+	default y
+
+config HUDSON_LEGACY_FREE
+	bool
+	default y
+
+config AGESA_BINARY_PI_FILE
+	string
+	default "3rdparty/blobs/mainboard/pcengines/apu2/AGESA.bin"
+
+choice
+	prompt "J19 pins 1-10"
+	default APU2_PINMUX_OFF_C
+
+config APU2_PINMUX_OFF_C
+	bool "disable"
+
+config APU2_PINMUX_GPIO0
+	bool "GPIO"
+
+config APU2_PINMUX_UART_C
+	bool "UART 0x3e8"
+
+endchoice
+
+choice
+	prompt "J19 pins 11-20"
+	default APU2_PINMUX_OFF_D
+
+config APU2_PINMUX_OFF_D
+	bool "disable"
+
+config APU2_PINMUX_GPIO1
+	bool "GPIO"
+
+config APU2_PINMUX_UART_D
+	bool "UART 0x2e8"
+
+endchoice
+
+endif # BOARD_PCENGINES_APU2
diff --git a/src/mainboard/pcengines/apu2/Kconfig.name b/src/mainboard/pcengines/apu2/Kconfig.name
new file mode 100644
index 0000000000..ab19ee4d8a
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_PCENGINES_APU2
+	bool "APU2"
diff --git a/src/mainboard/pcengines/apu2/Makefile.inc b/src/mainboard/pcengines/apu2/Makefile.inc
new file mode 100644
index 0000000000..e1a5f8d018
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/Makefile.inc
@@ -0,0 +1,41 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+
+romstage-y += BiosCallOuts.c
+romstage-y += OemCustomize.c
+romstage-y += gpio_ftns.c
+
+ramstage-y += BiosCallOuts.c
+ramstage-y += OemCustomize.c
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES  = HYNIX-2G-1333 HYNIX-4G-1333-ECC
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex)
+
+# Include spd rom data
+$(SPD_BIN): $(SPD_DEPS)
+	for f in $+; \
+	  do for c in $$(cat $$f | grep -v ^#); \
+	    do printf $$(printf '\%o' 0x$$c); \
+	  done; \
+	done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := spd
diff --git a/src/mainboard/pcengines/apu2/OemCustomize.c b/src/mainboard/pcengines/apu2/OemCustomize.c
new file mode 100644
index 0000000000..06a8f3d8af
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/OemCustomize.c
@@ -0,0 +1,121 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <northbridge/amd/pi/agesawrapper.h>
+
+#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
+
+static const PCIe_PORT_DESCRIPTOR PortList [] = {
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x01, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x02, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x03, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x04, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */
+	{
+		DESCRIPTOR_TERMINATE_LIST,
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x05, 0)
+	}
+};
+
+static const PCIe_DDI_DESCRIPTOR DdiList [] = {
+	/* DP0 to HDMI0/DP */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
+		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+	},
+	/* DP1 to FCH */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
+	},
+	/* DP2 to HDMI1/DP */
+	{
+		DESCRIPTOR_TERMINATE_LIST,
+		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19),
+		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3)
+	},
+};
+
+static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
+	.Flags        = DESCRIPTOR_TERMINATE_LIST,
+	.SocketId     = 0,
+	.PciePortList = PortList,
+	.DdiLinkList  = DdiList
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  OemCustomizeInitEarly
+ *
+ *  Description:
+ *    This stub function will call the host environment through the binary block
+ *    interface (call-out port) to provide a user hook opportunity
+ *
+ *  Parameters:
+ *    @param[in]      *InitEarly
+ *
+ *    @retval         VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID
+OemCustomizeInitEarly (
+	IN  OUT AMD_EARLY_PARAMS    *InitEarly
+	)
+{
+	InitEarly->GnbConfig.PcieComplexList = &PcieComplex;
+}
diff --git a/src/mainboard/pcengines/apu2/acpi/AmdImc.asl b/src/mainboard/pcengines/apu2/acpi/AmdImc.asl
new file mode 100644
index 0000000000..d3bb74e31e
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/acpi/AmdImc.asl
@@ -0,0 +1,109 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+OperationRegion(IMIO, SystemIO, 0x3E, 0x02)
+Field(IMIO , ByteAcc, NoLock, Preserve) {
+	IMCX,8,
+	IMCA,8
+}
+
+IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) {
+	Offset(0x80),
+	MSTI, 8,
+	MITS, 8,
+	MRG0, 8,
+	MRG1, 8,
+	MRG2, 8,
+	MRG3, 8,
+}
+
+Method(WACK, 0)
+{
+	Store(0, Local0)
+	While (LNotEqual(Local0, 0xFA)) {
+		Store(MRG0, Local0)
+		Sleep(10)
+	}
+}
+
+//Init
+Method (ITZE, 0)
+{
+	Store(0, MRG0)
+	Store(0xB5, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(0, MRG2)
+	Store(0x80, MSTI)
+	WACK()
+
+	Or(MRG2, 0x01, Local0)
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(Local0, MRG2)
+	Store(0x81, MSTI)
+	WACK()
+}
+
+//Sleep
+Method (IMSP, 0)
+{
+	Store(0, MRG0)
+	Store(0xB5, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(1, MRG1)
+	Store(0, MRG2)
+	Store(0x98, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(0xB4, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+}
+
+//Wake
+Method (IMWK, 0)
+{
+	Store(0, MRG0)
+	Store(0xB5, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(0, MRG2)
+	Store(0x80, MSTI)
+	WACK()
+
+	Or(MRG2, 0x01, Local0)
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(Local0, MRG2)
+	Store(0x81, MSTI)
+	WACK()
+}
diff --git a/src/mainboard/pcengines/apu2/acpi/gpe.asl b/src/mainboard/pcengines/apu2/acpi/gpe.asl
new file mode 100644
index 0000000000..cd366dcc5d
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/acpi/gpe.asl
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+Scope(\_GPE) {	/* Start Scope GPE */
+
+	/*  General event 3  */
+	Method(_L03) {
+		/* DBGO("\\_GPE\\_L00\n") */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  Legacy PM event  */
+	Method(_L08) {
+		/* DBGO("\\_GPE\\_L08\n") */
+	}
+
+	/*  Temp warning (TWarn) event  */
+	Method(_L09) {
+		/* DBGO("\\_GPE\\_L09\n") */
+		/* Notify (\_TZ.TZ00, 0x80) */
+	}
+
+	/*  USB controller PME#  */
+	Method(_L0B) {
+		/* DBGO("\\_GPE\\_L0B\n") */
+		Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  ExtEvent0 SCI event  */
+	Method(_L10) {
+		/* DBGO("\\_GPE\\_L10\n") */
+	}
+
+	/*  ExtEvent1 SCI event  */
+	Method(_L11) {
+		/* DBGO("\\_GPE\\_L11\n") */
+	}
+
+	/*  GPIO0 or GEvent8 event  */
+	Method(_L18) {
+		/* DBGO("\\_GPE\\_L18\n") */
+		Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+} 	/* End Scope GPE */
diff --git a/src/mainboard/pcengines/apu2/acpi/mainboard.asl b/src/mainboard/pcengines/apu2/acpi/mainboard.asl
new file mode 100644
index 0000000000..0141481d06
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/acpi/mainboard.asl
@@ -0,0 +1,37 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* Memory related values */
+Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+Name(PBLN, 0x0)	/* Length of BIOS area */
+
+Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
+Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+
+Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+/* Some global data */
+Name(OSVR, 3)	/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+Name(OSV, Ones)	/* Assume nothing */
+Name(PMOD, One)	/* Assume APIC */
+
+/* AcpiGpe0Blk */
+OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04)
+	Field(GP0B, ByteAcc, NoLock, Preserve) {
+	, 11,
+	USBS, 1,
+}
diff --git a/src/mainboard/pcengines/apu2/acpi/routing.asl b/src/mainboard/pcengines/apu2/acpi/routing.asl
new file mode 100644
index 0000000000..7cb7a2f44c
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/acpi/routing.asl
@@ -0,0 +1,193 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "routing.asl"
+	}
+*/
+
+/* Routing is in System Bus scope */
+Name(PR0, Package(){
+	/* NB devices */
+	/* Bus 0, Dev 0 - F16 Host Controller */
+
+	/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+	/* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */
+	Package(){0x0001FFFF, 0, INTB, 0 },
+	Package(){0x0001FFFF, 1, INTC, 0 },
+
+
+	/* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */
+	Package(){0x0002FFFF, 0, INTC, 0 },
+	Package(){0x0002FFFF, 1, INTD, 0 },
+	Package(){0x0002FFFF, 2, INTA, 0 },
+	Package(){0x0002FFFF, 3, INTB, 0 },
+
+	/* FCH devices */
+	/* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+	Package(){0x0014FFFF, 0, INTA, 0 },
+	Package(){0x0014FFFF, 1, INTB, 0 },
+	Package(){0x0014FFFF, 2, INTC, 0 },
+	Package(){0x0014FFFF, 3, INTD, 0 },
+
+	/* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+	/* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+	Package(){0x0012FFFF, 0, INTC, 0 },
+	Package(){0x0012FFFF, 1, INTB, 0 },
+
+	Package(){0x0013FFFF, 0, INTC, 0 },
+	Package(){0x0013FFFF, 1, INTB, 0 },
+
+	Package(){0x0016FFFF, 0, INTC, 0 },
+	Package(){0x0016FFFF, 1, INTB, 0 },
+
+	/* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+	Package(){0x0010FFFF, 0, INTC, 0 },
+	Package(){0x0010FFFF, 1, INTB, 0 },
+
+	/* Bus 0, Dev 17 - SATA controller */
+	Package(){0x0011FFFF, 0, INTD, 0 },
+
+})
+
+Name(APR0, Package(){
+	/* NB devices in APIC mode */
+	/* Bus 0, Dev 0 - F15 Host Controller */
+
+	/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+	Package(){0x0001FFFF, 0, 0, 44 },
+	Package(){0x0001FFFF, 1, 0, 45 },
+
+	/* Bus 0, Dev 2 - PCIe Bridges  */
+	Package(){0x0002FFFF, 0, 0, 24 },
+	Package(){0x0002FFFF, 1, 0, 25 },
+	Package(){0x0002FFFF, 2, 0, 26 },
+	Package(){0x0002FFFF, 3, 0, 27 },
+
+
+	/* SB devices in APIC mode */
+	/* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+	Package(){0x0014FFFF, 0, 0, 16 },
+	Package(){0x0014FFFF, 1, 0, 17 },
+	Package(){0x0014FFFF, 2, 0, 18 },
+	Package(){0x0014FFFF, 3, 0, 19 },
+
+	/* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+	/* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+	Package(){0x0012FFFF, 0, 0, 18 },
+	Package(){0x0012FFFF, 1, 0, 17 },
+
+	Package(){0x0013FFFF, 0, 0, 18 },
+	Package(){0x0013FFFF, 1, 0, 17 },
+
+	Package(){0x0016FFFF, 0, 0, 18 },
+	Package(){0x0016FFFF, 1, 0, 17 },
+
+	/* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+	Package(){0x0010FFFF, 0, 0, 0x12},
+	Package(){0x0010FFFF, 1, 0, 0x11},
+
+	/* Bus 0, Dev 17 - SATA controller */
+	Package(){0x0011FFFF, 0, 0, 19 },
+
+})
+
+Name(PS2, Package(){
+	Package(){0x0000FFFF, 0, INTC, 0 },
+	Package(){0x0000FFFF, 1, INTD, 0 },
+	Package(){0x0000FFFF, 2, INTA, 0 },
+	Package(){0x0000FFFF, 3, INTB, 0 },
+})
+Name(APS2, Package(){
+	Package(){0x0000FFFF, 0, 0, 18 },
+	Package(){0x0000FFFF, 1, 0, 19 },
+	Package(){0x0000FFFF, 2, 0, 16 },
+	Package(){0x0000FFFF, 3, 0, 17 },
+})
+
+/* GFX */
+Name(PS4, Package(){
+	Package(){0x0000FFFF, 0, INTA, 0 },
+	Package(){0x0000FFFF, 1, INTB, 0 },
+	Package(){0x0000FFFF, 2, INTC, 0 },
+	Package(){0x0000FFFF, 3, INTD, 0 },
+})
+Name(APS4, Package(){
+	/* PCIe slot - Hooked to PCIe slot 4 */
+	Package(){0x0000FFFF, 0, 0, 24 },
+	Package(){0x0000FFFF, 1, 0, 25 },
+	Package(){0x0000FFFF, 2, 0, 26 },
+	Package(){0x0000FFFF, 3, 0, 27 },
+})
+
+/* GPP 0 */
+Name(PS5, Package(){
+	Package(){0x0000FFFF, 0, INTB, 0 },
+	Package(){0x0000FFFF, 1, INTC, 0 },
+	Package(){0x0000FFFF, 2, INTD, 0 },
+	Package(){0x0000FFFF, 3, INTA, 0 },
+})
+Name(APS5, Package(){
+	Package(){0x0000FFFF, 0, 0, 28 },
+	Package(){0x0000FFFF, 1, 0, 29 },
+	Package(){0x0000FFFF, 2, 0, 30 },
+	Package(){0x0000FFFF, 3, 0, 31 },
+})
+
+/* GPP 1 */
+Name(PS6, Package(){
+	Package(){0x0000FFFF, 0, INTC, 0 },
+	Package(){0x0000FFFF, 1, INTD, 0 },
+	Package(){0x0000FFFF, 2, INTA, 0 },
+	Package(){0x0000FFFF, 3, INTB, 0 },
+})
+Name(APS6, Package(){
+	Package(){0x0000FFFF, 0, 0, 32 },
+	Package(){0x0000FFFF, 1, 0, 33 },
+	Package(){0x0000FFFF, 2, 0, 34 },
+	Package(){0x0000FFFF, 3, 0, 35 },
+})
+
+/* GPP 2 */
+Name(PS7, Package(){
+	Package(){0x0000FFFF, 0, INTD, 0 },
+	Package(){0x0000FFFF, 1, INTA, 0 },
+	Package(){0x0000FFFF, 2, INTB, 0 },
+	Package(){0x0000FFFF, 3, INTC, 0 },
+})
+Name(APS7, Package(){
+	Package(){0x0000FFFF, 0, 0, 36 },
+	Package(){0x0000FFFF, 1, 0, 37 },
+	Package(){0x0000FFFF, 2, 0, 38 },
+	Package(){0x0000FFFF, 3, 0, 39 },
+})
+
+/* GPP 3 */
+Name(PS8, Package(){
+	Package(){0x0000FFFF, 0, INTA, 0 },
+	Package(){0x0000FFFF, 1, INTB, 0 },
+	Package(){0x0000FFFF, 2, INTC, 0 },
+	Package(){0x0000FFFF, 3, INTD, 0 },
+})
+Name(APS8, Package(){
+	Package(){0x0000FFFF, 0, 0, 40 },
+	Package(){0x0000FFFF, 1, 0, 41 },
+	Package(){0x0000FFFF, 2, 0, 42 },
+	Package(){0x0000FFFF, 3, 0, 43 },
+})
diff --git a/src/mainboard/pcengines/apu2/acpi/si.asl b/src/mainboard/pcengines/apu2/acpi/si.asl
new file mode 100644
index 0000000000..292347127e
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/acpi/si.asl
@@ -0,0 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+Scope(\_SI) {
+	Method(_SST, 1) {
+		/* DBGO("\\_SI\\_SST\n") */
+		/* DBGO("   New Indicator state: ") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+	}
+} /* End Scope SI */
diff --git a/src/mainboard/pcengines/apu2/acpi/sleep.asl b/src/mainboard/pcengines/apu2/acpi/sleep.asl
new file mode 100644
index 0000000000..0734c8e3c8
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/acpi/sleep.asl
@@ -0,0 +1,95 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+*	Exit:
+*		-none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method.  This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver.  This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+
+External(\_SB.APTS, MethodObj)
+External(\_SB.AWAK, MethodObj)
+
+Method(_PTS, 1) {
+	/* DBGO("\\_PTS\n") */
+	/* DBGO("From S0 to S") */
+	/* DBGO(Arg0) */
+	/* DBGO("\n") */
+
+	/* Clear wake status structure. */
+	Store(0, Index(WKST,0))
+	Store(0, Index(WKST,1))
+	Store(7, UPWS)
+	\_SB.APTS(Arg0)
+} /* End Method(\_PTS) */
+
+/*
+*	\_BFS OEM Back From Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		-none-
+*/
+Method(\_BFS, 1) {
+	/* DBGO("\\_BFS\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+}
+
+/*
+*  \_WAK System Wake method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		Return package of 2 DWords
+*		Dword 1 - Status
+*			0x00000000	wake succeeded
+*			0x00000001	Wake was signaled but failed due to lack of power
+*			0x00000002	Wake was signaled but failed due to thermal condition
+*		Dword 2 - Power Supply state
+*			if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+	/* DBGO("\\_WAK\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+
+	/* clear USB wake up signal */
+	Store(1, USBS)
+
+	\_SB.AWAK(Arg0)
+
+	Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/pcengines/apu2/acpi/usb_oc.asl b/src/mainboard/pcengines/apu2/acpi/usb_oc.asl
new file mode 100644
index 0000000000..1643fe7cb4
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/acpi/usb_oc.asl
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "usb.asl"
+	}
+*/
+
+/* USB overcurrent mapping pins.   */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
diff --git a/src/mainboard/pcengines/apu2/acpi_tables.c b/src/mainboard/pcengines/apu2/acpi_tables.c
new file mode 100644
index 0000000000..d5ebad49d0
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/acpi_tables.c
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <northbridge/amd/pi/agesawrapper.h>
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam16.h>
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	/* create all subtables for processors */
+	current = acpi_create_madt_lapics(current);
+
+	/* Write SB800 IOAPIC, only one */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
+					   IO_APIC_ADDR, 0);
+
+	/* TODO: Remove the hardcode */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1,
+					   0xFEC20000, 24);
+
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 0, 2, 0);
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 9, 9, 0xF);
+	/* 0: mean bus 0--->ISA */
+	/* 0: PIC 0 */
+	/* 2: APIC 2 */
+	/* 5 mean: 0101 --> Edge-triggered, Active high */
+
+	/* create all subtables for processors */
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
+	/* 1: LINT1 connect to NMI */
+
+	return current;
+}
diff --git a/src/mainboard/pcengines/apu2/board_info.txt b/src/mainboard/pcengines/apu2/board_info.txt
new file mode 100644
index 0000000000..a69e616195
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/board_info.txt
@@ -0,0 +1,6 @@
+Board name: PC Engines APU2
+Board URL: http://www.pcengines.ch/apu2c2.htm
+Category: half
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/pcengines/apu2/cmos.layout b/src/mainboard/pcengines/apu2/cmos.layout
new file mode 100644
index 0000000000..d83bb14d26
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/cmos.layout
@@ -0,0 +1,74 @@
+#*****************************************************************************
+#
+#  This file is part of the coreboot project.
+#
+#  Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; version 2 of the License.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#*****************************************************************************
+
+entries
+
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399          1       e       2        multi_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+456          1       e       1        ECC_memory
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        amd_reserved
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+8     0     400Mhz
+8     1     333Mhz
+8     2     266Mhz
+8     3     200Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/pcengines/apu2/devicetree.cb b/src/mainboard/pcengines/apu2/devicetree.cb
new file mode 100644
index 0000000000..3c5ec81b6c
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/devicetree.cb
@@ -0,0 +1,91 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2013 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+chip northbridge/amd/pi/00730F01/root_complex
+	device cpu_cluster 0 on
+		chip cpu/amd/pi/00730F01
+			device lapic 0 on  end
+		end
+	end
+
+	device domain 0 on
+		subsystemid 0x1022 0x1410 inherit
+		chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
+
+			chip northbridge/amd/pi/00730F01 # PCI side of HT root complex
+				device pci 0.0 on  end # Root Complex
+				device pci 0.2 off end # IOMMU
+				device pci 1.0 off  end # Internal Graphics P2P bridge 0x9804
+				device pci 1.1 off  end # Internal Multimedia
+				device pci 2.0 on  end # PCIe Host Bridge
+				device pci 2.1 on  end # mPCIe slot 2 (on GFX lane)
+				device pci 2.2 on  end # LAN3
+				device pci 2.3 on  end # LAN2
+				device pci 2.4 on  end # LAN1
+				device pci 2.5 on  end # mPCIe slot 1
+				device pci 8.0 on  end # Platform Security Processor
+			end	#chip northbridge/amd/pi/00730F01
+
+			chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus
+				device pci 10.0 on  end # XHCI HC0 muxed with EHCI 2
+				device pci 11.0 on  end # SATA
+				device pci 12.0 off end # USB EHCI0 usb[0:3] not connected
+				device pci 13.0 on  end # USB EHCI1 usb[4:7]
+				device pci 14.0 on  end # SM
+				device pci 14.3 on      # LPC 0x439d
+					chip superio/nuvoton/nct5104d # SIO NCT5104D
+						register "irq_trigger_type" = "0"
+						device pnp 2e.0 off end
+						device pnp 2e.2 on
+							io 0x60 = 0x3f8
+							irq 0x70 = 4
+						end
+						device pnp 2e.3 on
+							io 0x60 = 0x2f8
+							irq 0x70 = 3
+						end
+						device pnp 2e.10 on
+							# UART C is conditionally turned on
+							io 0x60 = 0x3e8
+							irq 0x70 = 4
+						end
+						device pnp 2e.11 on
+							# UART D is conditionally turned on
+							io 0x60 = 0x2e8
+							irq 0x70 = 3
+						end
+						device pnp 2e.8 off end
+						device pnp 2e.f off end
+						# GPIO0 and GPIO1 are conditionally turned on
+						device pnp 2e.007 on end
+						device pnp 2e.107 on end
+						device pnp 2e.607 off end
+						device pnp 2e.e off end
+					end # SIO NCT5104D
+					end # LPC 0x439d
+
+				device pci 14.7 on  end # SD
+				device pci 16.0 on  end # USB EHCI2 usb[8:7] - muxed with XHCI
+			end	#chip southbridge/amd/pi/hudson
+
+			device pci 18.0 on  end
+			device pci 18.1 on  end
+			device pci 18.2 on  end
+			device pci 18.3 on  end
+			device pci 18.4 on  end
+			device pci 18.5 on  end
+
+		end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
+	end #domain
+end #northbridge/amd/pi/00730F01/root_complex
diff --git a/src/mainboard/pcengines/apu2/dsdt.asl b/src/mainboard/pcengines/apu2/dsdt.asl
new file mode 100644
index 0000000000..1fcd9054b4
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/dsdt.asl
@@ -0,0 +1,84 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+	"DSDT.AML",	/* Output filename */
+	"DSDT",		/* Signature */
+	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
+	"AMD   ",	/* OEMID */
+	"COREBOOT",	/* TABLE ID */
+	0x00010001	/* OEM Revision */
+	)
+{	/* Start of ASL file */
+	/* #include <arch/x86/acpi/debug.asl> */	/* Include global debug methods if needed */
+
+	/* Globals for the platform */
+	#include "acpi/mainboard.asl"
+
+	/* Describe the USB Overcurrent pins */
+	#include "acpi/usb_oc.asl"
+
+	/* PCI IRQ mapping for the Southbridge */
+	#include <southbridge/amd/pi/hudson/acpi/pcie.asl>
+
+	/* Describe the processor tree (\_PR) */
+	#include <cpu/amd/pi/00730F01/acpi/cpu.asl>
+
+	/* Contains the supported sleep states for this chipset */
+	#include <southbridge/amd/pi/hudson/acpi/sleepstates.asl>
+
+	/* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
+	#include "acpi/sleep.asl"
+
+	/* System Bus */
+	Scope(\_SB) { /* Start \_SB scope */
+	 	/* global utility methods expected within the \_SB scope */
+		#include <arch/x86/acpi/globutil.asl>
+
+		/* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
+		#include "acpi/routing.asl"
+
+		Device(PWRB) {
+			Name(_HID, EISAID("PNP0C0C"))
+			Name(_UID, 0xAA)
+			Name(_PRW, Package () {3, 0x04})
+			Name(_STA, 0x0B)
+		}
+
+		Device(PCI0) {
+			/* Describe the AMD Northbridge */
+			#include <northbridge/amd/pi/00730F01/acpi/northbridge.asl>
+
+			/* Describe the AMD Fusion Controller Hub Southbridge */
+			#include <southbridge/amd/pi/hudson/acpi/fch.asl>
+		}
+
+		/* Describe PCI INT[A-H] for the Southbridge */
+		#include <southbridge/amd/pi/hudson/acpi/pci_int.asl>
+
+	} /* End \_SB scope */
+
+	/* Describe SMBUS for the Southbridge */
+	#include <southbridge/amd/pi/hudson/acpi/smbus.asl>
+
+	/* Define the General Purpose Events for the platform */
+	#include "acpi/gpe.asl"
+
+	/* Define the System Indicators for the platform */
+	#include "acpi/si.asl"
+}
+/* End of ASL file */
diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.c b/src/mainboard/pcengines/apu2/gpio_ftns.c
new file mode 100644
index 0000000000..fd1fb3c9e2
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/gpio_ftns.c
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <southbridge/amd/cimx/cimx_util.h>
+#include "gpio_ftns.h"
+
+void configure_gpio(uintptr_t base_addr, u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting)
+{
+	u8 bdata;
+	u8 *memptr;
+
+	memptr = (u8 *)(base_addr + IOMUX_OFFSET + iomux_gpio);
+	*memptr = iomux_ftn;
+
+	memptr = (u8 *)(base_addr + GPIO_OFFSET + gpio);
+	bdata = *memptr;
+	bdata &= 0x07;
+	bdata |= setting; /* set direction and data value */
+	*memptr = bdata;
+}
diff --git a/src/mainboard/pcengines/apu2/gpio_ftns.h b/src/mainboard/pcengines/apu2/gpio_ftns.h
new file mode 100644
index 0000000000..4f0cbaaa62
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/gpio_ftns.h
@@ -0,0 +1,59 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef GPIO_FTNS_H
+#define GPIO_FTNS_H
+
+void configure_gpio(uintptr_t base_addr, u32 iomux_gpio, u8 iomux_ftn, u32 gpio, u32 setting);
+
+#define IOMUX_OFFSET    0xD00
+#define GPIO_OFFSET     0x1500
+
+//
+// Based on PC Engines APU2C schematics
+// http://www.pcengines.ch/schema/apu2c.pdf
+//
+#define IOMUX_GPIO_32   0x59    // MODESW
+#define IOMUX_GPIO_49   0x40    // STRAP0
+#define IOMUX_GPIO_50   0x41    // STRAP1
+#define IOMUX_GPIO_51   0x42    // PE3 Reset
+#define IOMUX_GPIO_55   0x43    // PE4 Reset
+#define IOMUX_GPIO_57   0x44    // LED1#
+#define IOMUX_GPIO_58   0x45    // LED2#
+#define IOMUX_GPIO_59   0x46    // LED3#
+#define IOMUX_GPIO_64   0x47    // PE3_WDIS
+#define IOMUX_GPIO_66   0x5B    // SPKR
+#define IOMUX_GPIO_68   0x48    // PE4_WDIS
+#define IOMUX_GPIO_71   0x4D    // PROCHOT
+
+#define GPIO_32   0x164    // MODESW
+#define GPIO_49   0x100    // STRAP0
+#define GPIO_50   0x104    // STRAP1
+#define GPIO_51   0x108    // PE3 Reset
+#define GPIO_55   0x10C    // PE4 Reset
+#define GPIO_57   0x110    // LED1#
+#define GPIO_58   0x114    // LED2#
+#define GPIO_59   0x118    // LED3#
+#define GPIO_64   0x11C    // PE3_WDIS
+#define GPIO_66   0x16C    // SPKR
+#define GPIO_68   0x120    // PE4_WDIS
+#define GPIO_71   0x134    // PROCHOT
+
+#define GPIO_OUTPUT_ENABLE      23
+#define GPIO_OUTPUT_VALUE       22
+#define GPIO_PULL_DOWN_ENABLE   21
+#define GPIO_PULL_UP_ENABLE     20
+
+#endif /* GPIO_FTNS_H */
diff --git a/src/mainboard/pcengines/apu2/irq_tables.c b/src/mainboard/pcengines/apu2/irq_tables.c
new file mode 100644
index 0000000000..eaeed3f8cb
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/irq_tables.c
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam16.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+			    u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+			    u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+			    u8 slot, u8 rfu)
+{
+	pirq_info->bus = bus;
+	pirq_info->devfn = devfn;
+	pirq_info->irq[0].link = link0;
+	pirq_info->irq[0].bitmap = bitmap0;
+	pirq_info->irq[1].link = link1;
+	pirq_info->irq[1].bitmap = bitmap1;
+	pirq_info->irq[2].link = link2;
+	pirq_info->irq[2].bitmap = bitmap2;
+	pirq_info->irq[3].link = link3;
+	pirq_info->irq[3].bitmap = bitmap3;
+	pirq_info->slot = slot;
+	pirq_info->rfu = rfu;
+}
+
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	struct irq_routing_table *pirq;
+	struct irq_info *pirq_info;
+	u32 slot_num;
+	u8 *v;
+
+	u8 sum = 0;
+	int i;
+
+	/* Align the table to be 16 byte aligned. */
+	addr += 15;
+	addr &= ~15;
+
+	/* This table must be between 0xf0000 & 0x100000 */
+	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+	pirq = (void *)(addr);
+	v = (u8 *) (addr);
+
+	pirq->signature = PIRQ_SIGNATURE;
+	pirq->version = PIRQ_VERSION;
+
+	pirq->rtr_bus = 0;
+	pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
+
+	pirq->exclusive_irqs = 0;
+
+	pirq->rtr_vendor = 0x1002;
+	pirq->rtr_device = 0x4384;
+
+	pirq->miniport_data = 0;
+
+	memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+	pirq_info = (void *)(&pirq->checksum + 1);
+	slot_num = 0;
+
+	/* pci bridge */
+	write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4),
+			0x1, 0xdee8, 0x2, 0xdee8, 0x3, 0xdee8, 0x4, 0xdee8, 0,
+			0);
+	pirq_info++;
+
+	slot_num++;
+
+	pirq->size = 32 + 16 * slot_num;
+
+	for (i = 0; i < pirq->size; i++)
+		sum += v[i];
+
+	sum = pirq->checksum - sum;
+
+	if (sum != pirq->checksum) {
+		pirq->checksum = sum;
+	}
+
+	printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+	return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/pcengines/apu2/mainboard.c b/src/mainboard/pcengines/apu2/mainboard.c
new file mode 100644
index 0000000000..98fe8ddf4a
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/mainboard.c
@@ -0,0 +1,195 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <cpu/amd/pi/s3_resume.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_def.h>
+#include <northbridge/amd/pi/BiosCallOuts.h>
+#include <northbridge/amd/pi/agesawrapper.h>
+#include <southbridge/amd/pi/hudson/hudson.h>
+#include <southbridge/amd/pi/hudson/pci_devs.h>
+#include <southbridge/amd/pi/hudson/amd_pci_int_defs.h>
+#include <northbridge/amd/pi/00730F01/pci_devs.h>
+#include <southbridge/amd/common/amd_pci_util.h>
+#include <superio/nuvoton/nct5104d/nct5104d.h>
+
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+
+#define SPD_SIZE  128
+#define PM_RTC_CONTROL	    0x56
+#define PM_S_STATE_CONTROL  0xBA
+
+
+/***********************************************************
+ * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
+ * This table is responsible for physically routing the PIC and
+ * IOAPIC IRQs to the different PCI devices on the system.  It
+ * is read and written via registers 0xC00/0xC01 as an
+ * Index/Data pair.  These values are chipset and mainboard
+ * dependent and should be updated accordingly.
+ *
+ * These values are used by the PCI configuration space,
+ * MP Tables.  TODO: Make ACPI use these values too.
+ */
+static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
+#if defined(__GNUC__)
+	[0 ... FCH_INT_TABLE_SIZE-1] = 0x1F,
+#endif
+	/* INTA# - INTH# */
+	[0x00] = 0x03,0x03,0x05,0x07,0x0B,0x0A,0x1F,0x1F,
+	/* Misc-nil,0,1,2, INT from Serial irq */
+	[0x08] = 0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+	/* SCI, SMBUS0, ASF, HDA, FC, RSVD, PerMon, SD */
+	[0x10] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
+	[0x18] = 0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	/* IMC INT0 - 5 */
+	[0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,
+	[0x28] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	/* USB Devs 18/19/22 INTA-C */
+	[0x30] = 0x05,0x1F,0x05,0x1F,0x04,0x1F,0x1F,0x1F,
+	[0x38] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	/* SATA */
+	[0x40] = 0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,
+	[0x48] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	[0x50] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	[0x58] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	[0x60] = 0x00,0x00,0x1F
+};
+
+static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
+#if defined(__GNUC__)
+	[0 ... FCH_INT_TABLE_SIZE-1] = 0x1F,
+#endif
+	/* INTA# - INTH# */
+	[0x00] = 0x10,0x10,0x12,0x13,0x14,0x15,0x1F,0x1F,
+	/* Misc-nil,0,1,2, INT from Serial irq */
+	[0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+	/* SCI, SMBUS0, ASF, HDA, FC, RSVD, PerMon, SD */
+	[0x10] = 0x09,0x1F,0x1F,0x1F,0x1F,0x1f,0x1F,0x10,
+	[0x18] = 0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	/* IMC INT0 - 5 */
+	[0x20] = 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,
+	[0x28] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	/* USB Devs 18/19/20/22 INTA-C */
+	[0x30] = 0x12,0x1f,0x12,0x1F,0x12,0x1F,0x1F,0x00,
+	[0x38] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	/* SATA */
+	[0x40] = 0x1f,0x13,0x00,0x00,0x00,0x00,0x00,0x00,
+	[0x48] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	[0x50] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	[0x58] = 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	[0x60] = 0x00,0x00,0x1F
+};
+
+/*
+ * This table defines the index into the picr/intr_data
+ * tables for each device.  Any enabled device and slot
+ * that uses hardware interrupts should have an entry
+ * in this table to define its index into the FCH
+ * PCI_INTR register 0xC00/0xC01.  This index will define
+ * the interrupt that it should use.  Putting PIRQ_A into
+ * the PIN A index for a device will tell that device to
+ * use PIC IRQ 10 if it uses PIN A for its hardware INT.
+ */
+static const struct pirq_struct mainboard_pirq_data[] = {
+	/* {PCI_devfn,	{PIN A, PIN B, PIN C, PIN D}}, */
+	{GFX_DEVFN,	{PIRQ_A, PIRQ_NC, PIRQ_NC, PIRQ_NC}},			/* VGA:		01.0 */
+	{ACTL_DEVFN,{PIRQ_NC, PIRQ_B, PIRQ_NC, PIRQ_NC}},			/* Audio:	01.1 */
+	{NB_PCIE_PORT1_DEVFN,	{PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},	/* x4 PCIe:	02.1 */
+	{NB_PCIE_PORT2_DEVFN,	{PIRQ_B, PIRQ_C, PIRQ_D, PIRQ_A}},	/* mPCIe:	02.2 */
+	{NB_PCIE_PORT3_DEVFN,	{PIRQ_C, PIRQ_D, PIRQ_A, PIRQ_B}},	/* NIC:		02.3 */
+	{XHCI_DEVFN,	{PIRQ_C, PIRQ_NC, PIRQ_NC, PIRQ_NC}},		/* XHCI:	10.0 */
+	{SATA_DEVFN,	{PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}},	/* SATA:	11.0 */
+	{OHCI1_DEVFN,	{PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}},	/* OHCI1:	12.0 */
+	{EHCI1_DEVFN,	{PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}},	/* EHCI1:	12.2 */
+	{OHCI2_DEVFN,	{PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}},	/* OHCI2:	13.0 */
+	{EHCI2_DEVFN,	{PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}},	/* EHCI2:	13.2 */
+	{SMBUS_DEVFN,	{PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}},	/* SMBUS:	14.0 */
+	{HDA_DEVFN,		{PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}},		/* HDA:		14.2 */
+	{SD_DEVFN,		{PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}},		/* SD:		14.7 */
+	{OHCI3_DEVFN,	{PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}},	/* OHCI3:	16.0 (same device as xHCI 10.0) */
+	{EHCI3_DEVFN,	{PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}},	/* EHCI3:	16.2 (same device as xHCI 10.1) */
+};
+
+/* PIRQ Setup */
+static void pirq_setup(void)
+{
+	pirq_data_ptr = mainboard_pirq_data;
+	pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct);
+	intr_data_ptr = mainboard_intr_data;
+	picr_data_ptr = mainboard_picr_data;
+}
+
+/* Wrapper to enable GPIO/UART devices under menuconfig. Revisit
+ * once configuration file format for SPI flash storage is complete.
+ */
+#define SIO_PORT 0x2e
+
+static void config_gpio_mux(void)
+{
+	struct device *uart, *gpio;
+
+	uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP3);
+	gpio = dev_find_slot_pnp(SIO_PORT, NCT5104D_GPIO0);
+	if (uart)
+		uart->enabled = CONFIG_APU2_PINMUX_UART_C;
+	if (gpio)
+		gpio->enabled = CONFIG_APU2_PINMUX_GPIO0;
+
+	uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP4);
+	gpio = dev_find_slot_pnp(SIO_PORT, NCT5104D_GPIO1);
+	if (uart)
+		uart->enabled = CONFIG_APU2_PINMUX_UART_D;
+	if (gpio)
+		gpio->enabled = CONFIG_APU2_PINMUX_GPIO1;
+}
+
+/**********************************************
+ * enable the dedicated function in mainboard.
+ **********************************************/
+
+static void mainboard_enable(device_t dev)
+{
+	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+
+	config_gpio_mux();
+
+	//
+	// Enable the RTC output
+	//
+	pm_write16 ( PM_RTC_CONTROL, pm_read16( PM_RTC_CONTROL ) | (1 << 11));
+
+	//
+	// Enable power on from WAKE#
+	//
+	pm_write16 ( PM_S_STATE_CONTROL, pm_read16( PM_S_STATE_CONTROL ) | (1 << 14));
+
+	if (acpi_is_wakeup_s3())
+		agesawrapper_fchs3earlyrestore();
+
+	/* Initialize the PIRQ data structures for consumption */
+	pirq_setup();
+}
+
+struct chip_operations mainboard_ops = {
+	.enable_dev = mainboard_enable,
+};
+
+
diff --git a/src/mainboard/pcengines/apu2/mptable.c b/src/mainboard/pcengines/apu2/mptable.c
new file mode 100644
index 0000000000..896e6373a7
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/mptable.c
@@ -0,0 +1,166 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam15.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/common/amd_pci_util.h>
+
+#if 0
+u8 picr_data[FCH_INT_TABLE_SIZE] = {
+	0x03,0x03,0x05,0x07,0x0B,0x0A,0x1F,0x1F,  /* 00 - 07 : INTA - INTF and 2 reserved dont map 4*/
+	0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,  /* 08 - 0F */
+	0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,  /* 10 - 17 */
+	0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 18 - 1F */
+	0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,  /* 20 - 27 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 28 - 2F */
+	0x05,0x1F,0x05,0x1F,0x04,0x1F,0x1F,0x1F,  /* 30 - 37 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 38 - 3F */
+	0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,  /* 40 - 47 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 48 - 4F */
+//	0x03,0x04,0x05,0x07,0x00,0x00,0x00,0x00,  /* 50 - 57 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 50 - 57 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 58 - 5F */
+	0x00,0x00,0x1F 							   /* 60 - 62 */
+};
+u8 intr_data[FCH_INT_TABLE_SIZE] = {
+	0x10,0x10,0x12,0x13,0x14,0x15,0x1F,0x1F,  /* 00 - 07 : INTA - INTF and 2 reserved dont map 4*/
+	0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,  /* 08 - 0F */
+	0x09,0x1F,0x1F,0x1F,0x1F,0x1f,0x1F,0x10,  /* 10 - 17 */
+	0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 18 - 1F */
+	0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,  /* 20 - 27 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 28 - 2F */
+	0x12,0x1f,0x12,0x1F,0x12,0x1F,0x1F,0x00,  /* 30 - 37 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 38 - 3F */
+	0x1f,0x13,0x00,0x00,0x00,0x00,0x00,0x00,  /* 40 - 47 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 48 - 4F */
+//	0x10,0x11,0x12,0x13,0x00,0x00,0x00,0x00,  /* 50 - 57 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 50 - 57 */
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,  /* 58 - 5F */
+	0x00,0x00,0x1F 							   /* 60 - 62 */
+};
+
+#endif
+
+
+static void *smp_write_config_table(void *v)
+{
+	struct mp_config_table *mc;
+	int bus_isa;
+
+	/* Intialize the MP_Table */
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+	mptable_init(mc, LOCAL_APIC_ADDR);
+
+	/*
+	 * Type 0: Processor Entries:
+	 * LAPIC ID, LAPIC Version, CPU Flags:EN/BP,
+	 * CPU Signature (Stepping, Model, Family),
+	 * Feature Flags
+	 */
+	smp_write_processors(mc);
+
+	/*
+	 * Type 1: Bus Entries:
+	 * Bus ID, Bus Type
+	 */
+	mptable_write_buses(mc, NULL, &bus_isa);
+
+	/*
+	 * Type 2: I/O APICs:
+	 * APIC ID, Version, APIC Flags:EN, Address
+	 */
+	u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24);
+	u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF);
+
+	smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
+
+	/* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin)				\
+	smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+	/*
+	 * Type 3: I/O Interrupt Table Entries:
+	 * Int Type, Int Polarity, Int Level, Source Bus ID,
+	 * Source Bus IRQ, Dest APIC ID, Dest PIN#
+	 */
+
+	mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
+
+	/* PCI interrupts are level triggered, and are
+	 * associated with a specific bus/device/function tuple.
+	 */
+#define PCI_INT(bus, dev, int_sign, pin)				\
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin))
+
+
+	/* SMBUS / ACPI */
+	PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]);
+
+	/* SD card */
+	PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_SD]);
+
+	/* USB */
+	PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]);
+	PCI_INT(0x0, 0x12, 0x1, intr_data_ptr[PIRQ_EHCI1]);
+	PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]);
+	PCI_INT(0x0, 0x13, 0x1, intr_data_ptr[PIRQ_EHCI2]);
+	PCI_INT(0x0, 0x16, 0x0, intr_data_ptr[PIRQ_OHCI3]);
+	PCI_INT(0x0, 0x16, 0x1, intr_data_ptr[PIRQ_EHCI3]);
+	PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_OHCI4]);
+
+	/* SATA */
+	PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]);
+
+	/* on board NIC & Slot PCIE */
+	PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]);
+	PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_F]);
+
+
+	/* GPP0 */
+	PCI_INT(0x0, 0x2, 0x0, 0x10);	// Network 3
+	/* GPP1 */
+	PCI_INT(0x0, 0x2, 0x1, 0x11);	// Network 2
+	/* GPP2 */
+	PCI_INT(0x0, 0x2, 0x2, 0x12);	// Network 1
+	/* GPP3 */
+	PCI_INT(0x0, 0x2, 0x3, 0x13);	// mPCI
+	/* GPP4 */
+	PCI_INT(0x0, 0x2, 0x4, 0x14);	// mPCI
+
+	IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+	IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr, 0);	/* ADDR, Enable Virtual Wire */
+	return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/pcengines/apu2/romstage.c b/src/mainboard/pcengines/apu2/romstage.c
new file mode 100644
index 0000000000..f8ed63cd20
--- /dev/null
+++ b/src/mainboard/pcengines/apu2/romstage.c
@@ -0,0 +1,145 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <commonlib/loglevel.h>
+#include <cpu/amd/car.h>
+#include <northbridge/amd/pi/agesawrapper.h>
+#include <northbridge/amd/pi/agesawrapper_call.h>
+#include <cpu/x86/bist.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/pi/hudson/hudson.h>
+#include <cpu/amd/pi/s3_resume.h>
+#include <Fch/Fch.h>
+#include "gpio_ftns.h"
+
+static void early_lpc_init(void);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	u32 val;
+
+	/*
+	 *  In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
+	 *  LpcClk[1:0]".  This following register setting has been
+	 *  replicated in every reference design since Parmer, so it is
+	 *  believed to be required even though it is not documented in
+	 *  the SoC BKDGs.  Without this setting, there is no serial
+	 *  output.
+	 */
+	outb(0xD2, 0xcd6);
+	outb(0x00, 0xcd7);
+
+	amd_initmmio();
+
+	hudson_lpc_port80();
+
+	if (!cpu_init_detectedx && boot_cpu()) {
+		post_code(0x30);
+		early_lpc_init();
+
+		hudson_clk_output_48Mhz();
+		post_code(0x31);
+		console_init();
+	}
+
+	/* Halt if there was a built in self test failure */
+	post_code(0x34);
+	report_bist_failure(bist);
+
+	/* Load MPB */
+	val = cpuid_eax(1);
+	printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+	post_code(0x37);
+	AGESAWRAPPER(amdinitreset);
+
+	post_code(0x38);
+	printk(BIOS_DEBUG, "Got past avalon_early_setup\n");
+
+	post_code(0x39);
+	AGESAWRAPPER(amdinitearly);
+	int s3resume = acpi_is_wakeup_s3();
+	if (!s3resume) {
+		post_code(0x40);
+		AGESAWRAPPER(amdinitpost);
+
+		//PspMboxBiosCmdDramInfo();
+		post_code(0x41);
+		AGESAWRAPPER(amdinitenv);
+		/*
+		  If code hangs here, please check cahaltasm.S
+		*/
+		disable_cache_as_ram();
+	} else { /* S3 detect */
+		printk(BIOS_INFO, "S3 detected\n");
+
+		post_code(0x60);
+		AGESAWRAPPER(amdinitresume);
+
+		AGESAWRAPPER(amds3laterestore);
+
+		post_code(0x61);
+		prepare_for_resume();
+	}
+
+	outb(0xEA, 0xCD6);
+	outb(0x1, 0xcd7);
+
+	post_code(0x50);
+	copy_and_run();
+
+	post_code(0x54);  /* Should never see this post code. */
+}
+
+
+static void early_lpc_init(void)
+{
+	u32 setting = 0x0;
+
+	//
+	// Configure output disabled, value low, pull up/down disabled
+	//
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_32, Function0, GPIO_32, setting);
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_49, Function2, GPIO_49, setting);
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_50, Function2, GPIO_50, setting);
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_71, Function0, GPIO_71, setting);
+	//
+	// Configure output enabled, value low, pull up/down disabled
+	//
+	setting = 0x1 << GPIO_OUTPUT_ENABLE;
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_57, Function1, GPIO_57, setting);
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_58, Function1, GPIO_58, setting);
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_59, Function3, GPIO_59, setting);
+	//
+	// Configure output enabled, value high, pull up/down disabled
+	//
+	setting = 0x1 << GPIO_OUTPUT_ENABLE | 0x1 << GPIO_OUTPUT_VALUE;
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_51, Function2, GPIO_51, setting);
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_55, Function3, GPIO_55, setting);
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_64, Function2, GPIO_64, setting);
+	configure_gpio(ACPI_MMIO_BASE, IOMUX_GPIO_68, Function0, GPIO_68, setting);
+}
author	Piotr Król <piotr.krol@3mdeb.com>	2016-05-27 12:04:13 +0200
committer	Kyösti Mälkki <kyosti.malkki@gmail.com>	2016-12-19 10:11:13 +0100
commit	dcd2f17ff47cc1a4b26f253fb11a991cfe4ff6f5 (patch)
tree	8ca75267ff1c0fa136680bbe7a87dd8b58e697ee /src/mainboard/pcengines
parent	cff3b095c2fdb7af7b6fb0a1e09c2a66c1ad1c67 (diff)