Remove motorola PPC boards. These have lain untouched and unused by anyone

for years. 

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4708 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 0 insertions, 68 deletions

diff --git a/src/mainboard/motorola/sandpoint/init.c b/src/mainboard/motorola/sandpoint/init.c
deleted file mode 100644
index 42acd35164..0000000000
--- a/src/mainboard/motorola/sandpoint/init.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2003, Greg Watson <gwatson@lanl.gov>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/*
- * Do very early board initialization:
- *
- * - Configure External Bus (EBC)
- * - Setup Flash
- * - Setup NVRTC
- * - Setup Board Control and Status Registers (BCSR)
- * - Enable UART0 for debugging
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc.h>
-#include <arch/io.h>
-#include <printk.h>
-#include <uart8250.h>
-
-void pnp_output(char address, char data)
-{
-	outb(address, CONFIG_PNP_CFGADDR);
-	outb(data, CONFIG_PNP_CFGDATA);
-}
-
-void
-board_init(void)
-{
-	/*
-	 * Enable UART0
-	 *
-	 * NOTE: this configuration assumes that the PCI/ISA IO
-	 * address space is properly configured by default on board
-	 * reset. While this seems to be the case with the X3, it may not
- 	 * always work.
-	 */
-	pnp_output(0x07, 6); /* LD 6 = UART0 */
-	pnp_output(0x30, 0); /* Dectivate */
-	pnp_output(0x60, CONFIG_TTYS0_BASE >> 8); /* IO Base */
-	pnp_output(0x61, CONFIG_TTYS0_BASE & 0xFF); /* IO Base */
-	pnp_output(0x30, 1); /* Activate */
-	uart8250_init(CONFIG_TTYS0_BASE, 115200/CONFIG_TTYS0_BAUD, CONFIG_TTYS0_LCS);
-}
-
-void
-board_init2(void)
-{
-	printk_info("Sandpoint initialized...\n");
-}