drop unsupported momentum apache board. Check

http://snapshots.linuxbios.org/stats/abuild-LinuxBIOSv2-2247.log



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2247 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 0 insertions, 143 deletions

diff --git a/src/mainboard/momentum/apache/Options.lb b/src/mainboard/momentum/apache/Options.lb
deleted file mode 100644
index 14fccf08b5..0000000000
--- a/src/mainboard/momentum/apache/Options.lb
+++ /dev/null
@@ -1,143 +0,0 @@
-##
-## Config file for the Embedded Planet EP405PC Computing Engine
-##
-
-uses PCIC0_CFGADDR 
-uses PCIC0_CFGDATA 
-uses ISA_IO_BASE 
-uses ISA_MEM_BASE 
-uses TTYS0_BASE 
-uses _IO_BASE 
-
-uses CPU_OPT
-uses CROSS_COMPILE 
-uses HAVE_OPTION_TABLE
-uses CONFIG_COMPRESS 
-uses CONFIG_CHIP_CONFIGURE
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_USE_INIT
-uses CONFIG_CONSOLE_SERIAL8250 
-uses TTYS0_BAUD TTYS0_DIV
-uses NO_POST
-uses CONFIG_IDE
-uses CONFIG_FS_STREAM
-uses CONFIG_FS_EXT2
-uses CONFIG_FS_ISO9660
-uses CONFIG_FS_FAT
-uses AUTOBOOT_CMDLINE
-uses CONFIG_SYS_CLK_FREQ
-uses IDE_BOOT_DRIVE
-#uses IDE_SWAB
-uses IDE_OFFSET 
-uses _RAMSTART
-uses ROM_SIZE
-uses _RESET
-uses _EXCEPTION_VECTORS
-uses _ROMBASE
-uses _ROMSTART
-uses _RAMBASE
-#uses _RAMSTART
-uses EMBEDDED_RAM_SIZE
-uses STACK_SIZE HEAP_SIZE
-
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
-uses LINUXBIOS_EXTRA_VERSION
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-
-##
-## Set PCI configuration register addresses
-##
-default PCIC0_CFGADDR=0xeec00000
-default PCIC0_CFGDATA=0xeec00004
-
-##
-## Set PCI/ISA I/O and memory base address
-##
-default ISA_IO_BASE=0xe8000000
-default ISA_MEM_BASE=0x80000000
-default _IO_BASE=ISA_IO_BASE
-
-##
-## HACK ALERT: the UART0 registers are not in the PCI I/O address space
-## but both IDE and UART use the same routines for I/O (inb/outb). To get 
-## around this we set TTYSO_BASE to the difference between the two.
-##
-default TTYS0_BASE=0xef600300-ISA_IO_BASE
-
-## Enable 64 bit instructions
-default CPU_OPT="-m64"
-#default CPU_OPT=""
-
-## Use stage 1 initialization code
-default CONFIG_USE_INIT=1
-
-## Use chip configuration
-default CONFIG_CHIP_CONFIGURE=1
-
-## We don't use compressed image
-default CONFIG_COMPRESS=0
-
-## Turn off POST codes
-default NO_POST=1
-
-## Enable serial console
-default DEFAULT_CONSOLE_LOGLEVEL=8
-default CONFIG_CONSOLE_SERIAL8250=1
-# Divisor of 69 == 9600 baud due to weird clocking
-default TTYS0_DIV=69
-default TTYS0_BAUD=9600
-
-## Boot linux from IDE
-default CONFIG_IDE=1
-default CONFIG_FS_STREAM=1
-default CONFIG_FS_EXT2=1
-default CONFIG_FS_ISO9660=1
-default CONFIG_FS_FAT=1
-default AUTOBOOT_CMDLINE="hda1:/vmlinuz"
-
-default ROM_SIZE=1048576
-
-## Board has fixed size RAM
-default EMBEDDED_RAM_SIZE=64*1024*1024
-
-## LinuxBIOS C code runs at this location in RAM
-default _RAMBASE=0x00100000
-
-##
-## Use a 64K stack
-##
-default STACK_SIZE=0x10000
-
-##
-## Use a 64K heap
-##
-default HEAP_SIZE=0x10000
-
-##
-## System clock
-##
-default CONFIG_SYS_CLK_FREQ=33
-
-##
-default _ROMBASE=0xfff00000
-
-## Reset vector address
-default _RESET=0xfffffffc
-
-## Exception vectors
-default _EXCEPTION_VECTORS=_ROMBASE+0x100
-
-## linuxBIOS ROM start address
-default _ROMSTART=0xfff03000
-
-## linuxBIOS C code runs at this location in RAM
-default _RAMBASE=0x00100000
-
-default CROSS_COMPILE="powerpc64-unknown-linux-gnu-"
-### End Options.lb
-end